X-Git-Url: http://ftp.safe.ca/?a=blobdiff_plain;f=lib%2FKconfig.debug;h=6af20a8a0a5411b33a676ccde86c1b4fc6a001e7;hb=632ee200130899252508c478ad0e808222573fbc;hp=2e75478e9c696bc6933ca8952c0a013dd30eb78a;hpb=db5e53fbf0abf5cadc83be57032242e5e7c6c394;p=safe%2Fjmp%2Flinux-2.6 diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug index 2e75478..6af20a8 100644 --- a/lib/Kconfig.debug +++ b/lib/Kconfig.debug @@ -50,6 +50,14 @@ config MAGIC_SYSRQ keys are documented in . Don't say Y unless you really know what this hack does. +config STRIP_ASM_SYMS + bool "Strip assembler-generated symbols during link" + default n + help + Strip internal assembler-generated symbols during a link (symbols + that look like '.Lxxx') so they don't pollute the output of + get_wchan() and suchlike. + config UNUSED_SYMBOLS bool "Enable unused/obsolete exported symbols" default y if X86 @@ -97,7 +105,7 @@ config DEBUG_SECTION_MISMATCH bool "Enable full Section mismatch analysis" depends on UNDEFINED # This option is on purpose disabled for now. - # It will be enabled when we are down to a resonable number + # It will be enabled when we are down to a reasonable number # of section mismatch warnings (< 10 for an allyesconfig build) help The section mismatch analysis checks if there are illegal @@ -186,6 +194,44 @@ config BOOTPARAM_SOFTLOCKUP_PANIC_VALUE default 0 if !BOOTPARAM_SOFTLOCKUP_PANIC default 1 if BOOTPARAM_SOFTLOCKUP_PANIC +config DETECT_HUNG_TASK + bool "Detect Hung Tasks" + depends on DEBUG_KERNEL + default DETECT_SOFTLOCKUP + help + Say Y here to enable the kernel to detect "hung tasks", + which are bugs that cause the task to be stuck in + uninterruptible "D" state indefinitiley. + + When a hung task is detected, the kernel will print the + current stack trace (which you should report), but the + task will stay in uninterruptible state. If lockdep is + enabled then all held locks will also be reported. This + feature has negligible overhead. + +config BOOTPARAM_HUNG_TASK_PANIC + bool "Panic (Reboot) On Hung Tasks" + depends on DETECT_HUNG_TASK + help + Say Y here to enable the kernel to panic on "hung tasks", + which are bugs that cause the kernel to leave a task stuck + in uninterruptible "D" state. + + The panic can be used in combination with panic_timeout, + to cause the system to reboot automatically after a + hung task has been detected. This feature is useful for + high-availability systems that have uptime guarantees and + where a hung tasks must be resolved ASAP. + + Say N if unsure. + +config BOOTPARAM_HUNG_TASK_PANIC_VALUE + int + depends on DETECT_HUNG_TASK + range 0 1 + default 0 if !BOOTPARAM_HUNG_TASK_PANIC + default 1 if BOOTPARAM_HUNG_TASK_PANIC + config SCHED_DEBUG bool "Collect scheduler debugging info" depends on DEBUG_KERNEL && PROC_FS @@ -252,6 +298,14 @@ config DEBUG_OBJECTS_TIMERS timer routines to track the life time of timer objects and validate the timer operations. +config DEBUG_OBJECTS_WORK + bool "Debug work objects" + depends on DEBUG_OBJECTS + help + If you say Y here, additional code will be inserted into the + work queue routines to track the life time of work objects and + validate the work operations. + config DEBUG_OBJECTS_ENABLE_DEFAULT int "debug_objects bootup default value (0-1)" range 0 1 @@ -262,7 +316,7 @@ config DEBUG_OBJECTS_ENABLE_DEFAULT config DEBUG_SLAB bool "Debug slab memory allocations" - depends on DEBUG_KERNEL && SLAB + depends on DEBUG_KERNEL && SLAB && !KMEMCHECK help Say Y here to have the kernel do limited verification on memory allocation as well as poisoning memory on free to catch use of freed @@ -274,7 +328,7 @@ config DEBUG_SLAB_LEAK config SLUB_DEBUG_ON bool "SLUB debugging on by default" - depends on SLUB && SLUB_DEBUG + depends on SLUB && SLUB_DEBUG && !KMEMCHECK default n help Boot with debugging on by default. SLUB boots by default with @@ -298,9 +352,56 @@ config SLUB_STATS out which slabs are relevant to a particular load. Try running: slabinfo -DA +config DEBUG_KMEMLEAK + bool "Kernel memory leak detector" + depends on DEBUG_KERNEL && EXPERIMENTAL && !MEMORY_HOTPLUG && \ + (X86 || ARM || PPC || S390) + + select DEBUG_FS if SYSFS + select STACKTRACE if STACKTRACE_SUPPORT + select KALLSYMS + select CRC32 + help + Say Y here if you want to enable the memory leak + detector. The memory allocation/freeing is traced in a way + similar to the Boehm's conservative garbage collector, the + difference being that the orphan objects are not freed but + only shown in /sys/kernel/debug/kmemleak. Enabling this + feature will introduce an overhead to memory + allocations. See Documentation/kmemleak.txt for more + details. + + Enabling DEBUG_SLAB or SLUB_DEBUG may increase the chances + of finding leaks due to the slab objects poisoning. + + In order to access the kmemleak file, debugfs needs to be + mounted (usually at /sys/kernel/debug). + +config DEBUG_KMEMLEAK_EARLY_LOG_SIZE + int "Maximum kmemleak early log entries" + depends on DEBUG_KMEMLEAK + range 200 40000 + default 400 + help + Kmemleak must track all the memory allocations to avoid + reporting false positives. Since memory may be allocated or + freed before kmemleak is initialised, an early log buffer is + used to store these actions. If kmemleak reports "early log + buffer exceeded", please increase this value. + +config DEBUG_KMEMLEAK_TEST + tristate "Simple test for the kernel memory leak detector" + depends on DEBUG_KMEMLEAK + help + Say Y or M here to build a test for the kernel memory leak + detector. This option enables a module that explicitly leaks + memory. + + If unsure, say N. + config DEBUG_PREEMPT bool "Debug preemptible kernel" - depends on DEBUG_KERNEL && PREEMPT && (TRACE_IRQFLAGS_SUPPORT || PPC64) + depends on DEBUG_KERNEL && PREEMPT && TRACE_IRQFLAGS_SUPPORT default y help If you say Y here then the kernel will use a debug variant of the @@ -398,11 +499,23 @@ config PROVE_LOCKING For more details, see Documentation/lockdep-design.txt. +config PROVE_RCU + bool "RCU debugging: prove RCU correctness" + depends on PROVE_LOCKING + default n + help + This feature enables lockdep extensions that check for correct + use of RCU APIs. This is currently under development. Say Y + if you want to debug RCU usage or help work on the PROVE_RCU + feature. + + Say N if you are unsure. + config LOCKDEP bool depends on DEBUG_KERNEL && TRACE_IRQFLAGS_SUPPORT && STACKTRACE_SUPPORT && LOCKDEP_SUPPORT select STACKTRACE - select FRAME_POINTER if !X86 && !MIPS && !PPC + select FRAME_POINTER if !MIPS && !PPC && !ARM_UNWIND && !S390 select KALLSYMS select KALLSYMS_ALL @@ -475,7 +588,7 @@ config DEBUG_BUGVERBOSE depends on BUG depends on ARM || AVR32 || M32R || M68K || SPARC32 || SPARC64 || \ FRV || SUPERH || GENERIC_BUG || BLACKFIN || MN10300 - default !EMBEDDED + default y help Say Y here to make BUG() panics output the file name and line number of the BUG call as well as the EIP and oops trace. This aids @@ -512,6 +625,13 @@ config DEBUG_VIRTUAL If unsure, say N. +config DEBUG_NOMMU_REGIONS + bool "Debug the global anon/private NOMMU mapping region tree" + depends on DEBUG_KERNEL && !MMU + help + This option causes the global tree of anonymous and private mapping + regions to be regularly checked for invalid topology. + config DEBUG_WRITECOUNT bool "Debug filesystem writers count" depends on DEBUG_KERNEL @@ -563,17 +683,41 @@ config DEBUG_NOTIFIERS This is a relatively cheap check but if you care about maximum performance, say N. +config DEBUG_CREDENTIALS + bool "Debug credential management" + depends on DEBUG_KERNEL + help + Enable this to turn on some debug checking for credential + management. The additional code keeps track of the number of + pointers from task_structs to any given cred struct, and checks to + see that this number never exceeds the usage count of the cred + struct. + + Furthermore, if SELinux is enabled, this also checks that the + security pointer in the cred struct is never seen to be invalid. + + If unsure, say N. + +# +# Select this config option from the architecture Kconfig, if it +# it is preferred to always offer frame pointers as a config +# option on the architecture (regardless of KERNEL_DEBUG): +# +config ARCH_WANT_FRAME_POINTERS + bool + help + config FRAME_POINTER bool "Compile the kernel with frame pointers" depends on DEBUG_KERNEL && \ - (X86 || CRIS || M68K || M68KNOMMU || FRV || UML || S390 || \ - AVR32 || SUPERH || BLACKFIN || MN10300) - default y if DEBUG_INFO && UML + (CRIS || M68K || M68KNOMMU || FRV || UML || \ + AVR32 || SUPERH || BLACKFIN || MN10300) || \ + ARCH_WANT_FRAME_POINTERS + default y if (DEBUG_INFO && UML) || ARCH_WANT_FRAME_POINTERS help - If you say Y here the resulting kernel image will be slightly larger - and slower, but it might give very useful debugging information on - some architectures or if you use external debuggers. - If you don't debug the kernel, you can say N. + If you say Y here the resulting kernel image will be slightly + larger and slower, but it gives very useful debugging information + in case of kernel bugs. (precise oopses/stacktraces/warnings) config BOOT_PRINTK_DELAY bool "Delay each boot printk message by N milliseconds" @@ -626,29 +770,16 @@ config RCU_TORTURE_TEST_RUNNABLE config RCU_CPU_STALL_DETECTOR bool "Check for stalled CPUs delaying RCU grace periods" - depends on CLASSIC_RCU - default n - help - This option causes RCU to printk information on which - CPUs are delaying the current grace period, but only when - the grace period extends for excessive time periods. - - Say Y if you want RCU to perform such checks. - - Say N if you are unsure. - -config RCU_CPU_STALL_DETECTOR - bool "Check for stalled CPUs delaying RCU grace periods" - depends on CLASSIC_RCU || TREE_RCU - default n + depends on TREE_RCU || TREE_PREEMPT_RCU + default y help This option causes RCU to printk information on which CPUs are delaying the current grace period, but only when the grace period extends for excessive time periods. - Say Y if you want RCU to perform such checks. + Say N if you want to disable such checks. - Say N if you are unsure. + Say Y if you are unsure. config KPROBES_SANITY_TEST bool "Kprobes sanity tests" @@ -704,6 +835,21 @@ config DEBUG_BLOCK_EXT_DEVT Say N if you are unsure. +config DEBUG_FORCE_WEAK_PER_CPU + bool "Force weak per-cpu definitions" + depends on DEBUG_KERNEL + help + s390 and alpha require percpu variables in modules to be + defined weak to work around addressing range issue which + puts the following two restrictions on percpu variable + definitions. + + 1. percpu symbols must be unique whether static or not + 2. percpu variables can't be defined inside a function + + To ensure that generic code follows the above rules, this + option forces all percpu variables to be defined as weak. + config LKDTM tristate "Linux Kernel Dump Test Tool Module" depends on DEBUG_KERNEL @@ -768,13 +914,13 @@ config FAULT_INJECTION_STACKTRACE_FILTER depends on FAULT_INJECTION_DEBUG_FS && STACKTRACE_SUPPORT depends on !X86_64 select STACKTRACE - select FRAME_POINTER if !PPC + select FRAME_POINTER if !PPC && !S390 help Provide stacktrace filter for fault-injection capabilities config LATENCYTOP bool "Latency measuring infrastructure" - select FRAME_POINTER if !MIPS && !PPC + select FRAME_POINTER if !MIPS && !PPC && !S390 select KALLSYMS select KALLSYMS_ALL select STACKTRACE @@ -787,12 +933,13 @@ config LATENCYTOP config SYSCTL_SYSCALL_CHECK bool "Sysctl checks" - depends on SYSCTL_SYSCALL + depends on SYSCTL ---help--- sys_sysctl uses binary paths that have been found challenging to properly maintain and use. This enables checks that help you to keep things correct. +source mm/Kconfig.debug source kernel/trace/Kconfig config PROVIDE_OHCI1394_DMA_INIT @@ -835,7 +982,7 @@ config FIREWIRE_OHCI_REMOTE_DMA If unsure, say N. -menuconfig BUILD_DOCSRC +config BUILD_DOCSRC bool "Build targets in Documentation/ tree" depends on HEADERS_CHECK help @@ -844,61 +991,83 @@ menuconfig BUILD_DOCSRC Say N if you are unsure. -config DYNAMIC_PRINTK_DEBUG - bool "Enable dynamic printk() call support" +config DYNAMIC_DEBUG + bool "Enable dynamic printk() support" default n depends on PRINTK - select PRINTK_DEBUG + depends on DEBUG_FS help Compiles debug level messages into the kernel, which would not otherwise be available at runtime. These messages can then be - enabled/disabled on a per module basis. This mechanism implicitly - enables all pr_debug() and dev_dbg() calls. The impact of this - compile option is a larger kernel text size of about 2%. + enabled/disabled based on various levels of scope - per source file, + function, module, format string, and line number. This mechanism + implicitly enables all pr_debug() and dev_dbg() calls. The impact of + this compile option is a larger kernel text size of about 2%. Usage: - Dynamic debugging is controlled by the debugfs file, - dynamic_printk/modules. This file contains a list of the modules that - can be enabled. The format of the file is the module name, followed - by a set of flags that can be enabled. The first flag is always the - 'enabled' flag. For example: + Dynamic debugging is controlled via the 'dynamic_debug/ddebug' file, + which is contained in the 'debugfs' filesystem. Thus, the debugfs + filesystem must first be mounted before making use of this feature. + We refer the control file as: /dynamic_debug/ddebug. This + file contains a list of the debug statements that can be enabled. The + format for each line of the file is: - - . - . - . + filename:lineno [module]function flags format - : Name of the module in which the debug call resides - : whether the messages are enabled or not + filename : source file of the debug statement + lineno : line number of the debug statement + module : module that contains the debug statement + function : function that contains the debug statement + flags : 'p' means the line is turned 'on' for printing + format : the format used for the debug statement From a live system: - snd_hda_intel enabled=0 - fixup enabled=0 - driver enabled=0 - - Enable a module: + nullarbor:~ # cat /dynamic_debug/ddebug + # filename:lineno [module]function flags format + fs/aio.c:222 [aio]__put_ioctx - "__put_ioctx:\040freeing\040%p\012" + fs/aio.c:248 [aio]ioctx_alloc - "ENOMEM:\040nr_events\040too\040high\012" + fs/aio.c:1770 [aio]sys_io_cancel - "calling\040cancel\012" - $echo "set enabled=1 " > dynamic_printk/modules + Example usage: - Disable a module: + // enable the message at line 1603 of file svcsock.c + nullarbor:~ # echo -n 'file svcsock.c line 1603 +p' > + /dynamic_debug/ddebug - $echo "set enabled=0 " > dynamic_printk/modules + // enable all the messages in file svcsock.c + nullarbor:~ # echo -n 'file svcsock.c +p' > + /dynamic_debug/ddebug - Enable all modules: + // enable all the messages in the NFS server module + nullarbor:~ # echo -n 'module nfsd +p' > + /dynamic_debug/ddebug - $echo "set enabled=1 all" > dynamic_printk/modules + // enable all 12 messages in the function svc_process() + nullarbor:~ # echo -n 'func svc_process +p' > + /dynamic_debug/ddebug - Disable all modules: + // disable all 12 messages in the function svc_process() + nullarbor:~ # echo -n 'func svc_process -p' > + /dynamic_debug/ddebug - $echo "set enabled=0 all" > dynamic_printk/modules + See Documentation/dynamic-debug-howto.txt for additional information. - Finally, passing "dynamic_printk" at the command line enables - debugging for all modules. This mode can be turned off via the above - disable command. +config DMA_API_DEBUG + bool "Enable debugging of DMA-API usage" + depends on HAVE_DMA_API_DEBUG + help + Enable this option to debug the use of the DMA API by device drivers. + With this option you will be able to detect common bugs in device + drivers like double-freeing of DMA mappings or freeing mappings that + were never allocated. + This option causes a performance degredation. Use only if you want + to debug device drivers. If unsure, say N. source "samples/Kconfig" source "lib/Kconfig.kgdb" + +source "lib/Kconfig.kmemcheck"