X-Git-Url: http://ftp.safe.ca/?a=blobdiff_plain;f=init%2FKconfig;h=f068071fcc5d952a0a6c7d745797ea094d7b3999;hb=7766970cc13e9071b356b1f2a48a9eb8675bfcce;hp=f6281711166d5dbeba4f55121547396d00b6ff2e;hpb=2ca1a615835d9f4990f42102ab1f2ef434e7e89c;p=safe%2Fjmp%2Flinux-2.6 diff --git a/init/Kconfig b/init/Kconfig index f628171..f068071 100644 --- a/init/Kconfig +++ b/init/Kconfig @@ -238,6 +238,98 @@ config AUDIT_TREE def_bool y depends on AUDITSYSCALL && INOTIFY +menu "RCU Subsystem" + +choice + prompt "RCU Implementation" + default CLASSIC_RCU + +config CLASSIC_RCU + bool "Classic RCU" + help + This option selects the classic RCU implementation that is + designed for best read-side performance on non-realtime + systems. + + Select this option if you are unsure. + +config TREE_RCU + bool "Tree-based hierarchical RCU" + help + This option selects the RCU implementation that is + designed for very large SMP system with hundreds or + thousands of CPUs. + +config PREEMPT_RCU + bool "Preemptible RCU" + depends on PREEMPT + help + This option reduces the latency of the kernel by making certain + RCU sections preemptible. Normally RCU code is non-preemptible, if + this option is selected then read-only RCU sections become + preemptible. This helps latency, but may expose bugs due to + now-naive assumptions about each RCU read-side critical section + remaining on a given CPU through its execution. + +endchoice + +config RCU_TRACE + bool "Enable tracing for RCU" + depends on TREE_RCU || PREEMPT_RCU + help + This option provides tracing in RCU which presents stats + in debugfs for debugging RCU implementation. + + Say Y here if you want to enable RCU tracing + Say N if you are unsure. + +config RCU_FANOUT + int "Tree-based hierarchical RCU fanout value" + range 2 64 if 64BIT + range 2 32 if !64BIT + depends on TREE_RCU + default 64 if 64BIT + default 32 if !64BIT + help + This option controls the fanout of hierarchical implementations + of RCU, allowing RCU to work efficiently on machines with + large numbers of CPUs. This value must be at least the cube + root of NR_CPUS, which allows NR_CPUS up to 32,768 for 32-bit + systems and up to 262,144 for 64-bit systems. + + Select a specific number if testing RCU itself. + Take the default if unsure. + +config RCU_FANOUT_EXACT + bool "Disable tree-based hierarchical RCU auto-balancing" + depends on TREE_RCU + default n + help + This option forces use of the exact RCU_FANOUT value specified, + regardless of imbalances in the hierarchy. This is useful for + testing RCU itself, and might one day be useful on systems with + strong NUMA behavior. + + Without RCU_FANOUT_EXACT, the code will balance the hierarchy. + + Say N if unsure. + +config TREE_RCU_TRACE + def_bool RCU_TRACE && TREE_RCU + select DEBUG_FS + help + This option provides tracing for the TREE_RCU implementation, + permitting Makefile to trivially select kernel/rcutree_trace.c. + +config PREEMPT_RCU_TRACE + def_bool RCU_TRACE && PREEMPT_RCU + select DEBUG_FS + help + This option provides tracing for the PREEMPT_RCU implementation, + permitting Makefile to trivially select kernel/rcupreempt_trace.c. + +endmenu # "RCU Subsystem" + config IKCONFIG tristate "Kernel .config support" ---help--- @@ -271,59 +363,6 @@ config LOG_BUF_SHIFT 13 => 8 KB 12 => 4 KB -config CGROUPS - bool "Control Group support" - help - This option will let you use process cgroup subsystems - such as Cpusets - - Say N if unsure. - -config CGROUP_DEBUG - bool "Example debug cgroup subsystem" - depends on CGROUPS - default n - help - This option enables a simple cgroup subsystem that - exports useful debugging information about the cgroups - framework - - Say N if unsure - -config CGROUP_NS - bool "Namespace cgroup subsystem" - depends on CGROUPS - help - Provides a simple namespace cgroup subsystem to - provide hierarchical naming of sets of namespaces, - for instance virtual servers and checkpoint/restart - jobs. - -config CGROUP_FREEZER - bool "control group freezer subsystem" - depends on CGROUPS - help - Provides a way to freeze and unfreeze all tasks in a - cgroup. - -config CGROUP_DEVICE - bool "Device controller for cgroups" - depends on CGROUPS && EXPERIMENTAL - help - Provides a cgroup implementing whitelists for devices which - a process in the cgroup can mknod or open. - -config CPUSETS - bool "Cpuset support" - depends on SMP && CGROUPS - help - This option will let you create and manage CPUSETs which - allow dynamically partitioning a system into sets of CPUs and - Memory Nodes and assigning tasks to run only within those sets. - This is primarily useful on large SMP or NUMA systems. - - Say N if unsure. - # # Architectures with an unreliable sched_clock() should select this: # @@ -337,6 +376,8 @@ config GROUP_SCHED help This feature lets CPU scheduler recognize task groups and control CPU bandwidth allocation to such task groups. + In order to create a group from arbitrary set of processes, use + CONFIG_CGROUPS. (See Control Group support.) config FAIR_GROUP_SCHED bool "Group scheduling for SCHED_OTHER" @@ -374,28 +415,90 @@ config CGROUP_SCHED This option allows you to create arbitrary task groups using the "cgroup" pseudo filesystem and control the cpu bandwidth allocated to each such task group. - Refer to Documentation/cgroups.txt for more information - on "cgroup" pseudo filesystem. + Refer to Documentation/cgroups/cgroups.txt for more + information on "cgroup" pseudo filesystem. endchoice +menuconfig CGROUPS + boolean "Control Group support" + help + This option adds support for grouping sets of processes together, for + use with process control subsystems such as Cpusets, CFS, memory + controls or device isolation. + See + - Documentation/scheduler/sched-design-CFS.txt (CFS) + - Documentation/cgroups/ (features for grouping, isolation + and resource control) + + Say N if unsure. + +if CGROUPS + +config CGROUP_DEBUG + bool "Example debug cgroup subsystem" + depends on CGROUPS + default n + help + This option enables a simple cgroup subsystem that + exports useful debugging information about the cgroups + framework. + + Say N if unsure. + +config CGROUP_NS + bool "Namespace cgroup subsystem" + depends on CGROUPS + help + Provides a simple namespace cgroup subsystem to + provide hierarchical naming of sets of namespaces, + for instance virtual servers and checkpoint/restart + jobs. + +config CGROUP_FREEZER + bool "Freezer cgroup subsystem" + depends on CGROUPS + help + Provides a way to freeze and unfreeze all tasks in a + cgroup. + +config CGROUP_DEVICE + bool "Device controller for cgroups" + depends on CGROUPS && EXPERIMENTAL + help + Provides a cgroup implementing whitelists for devices which + a process in the cgroup can mknod or open. + +config CPUSETS + bool "Cpuset support" + depends on SMP && CGROUPS + help + This option will let you create and manage CPUSETs which + allow dynamically partitioning a system into sets of CPUs and + Memory Nodes and assigning tasks to run only within those sets. + This is primarily useful on large SMP or NUMA systems. + + Say N if unsure. + +config PROC_PID_CPUSET + bool "Include legacy /proc//cpuset file" + depends on CPUSETS + default y + config CGROUP_CPUACCT bool "Simple CPU accounting cgroup subsystem" depends on CGROUPS help Provides a simple Resource Controller for monitoring the - total CPU consumed by the tasks in a cgroup + total CPU consumed by the tasks in a cgroup. config RESOURCE_COUNTERS bool "Resource counters" help This option enables controller independent resource accounting - infrastructure that works with cgroups + infrastructure that works with cgroups. depends on CGROUPS -config MM_OWNER - bool - config CGROUP_MEM_RES_CTLR bool "Memory Resource Controller for Control Groups" depends on CGROUPS && RESOURCE_COUNTERS @@ -414,41 +517,67 @@ config CGROUP_MEM_RES_CTLR sure you need the memory resource controller. Even when you enable this, you can set "cgroup_disable=memory" at your boot option to disable memory resource controller and you can avoid overheads. - (and lose benefits of memory resource contoller) + (and lose benefits of memory resource controller) This config option also selects MM_OWNER config option, which could in turn add some fork/exit overhead. +config CGROUP_MEM_RES_CTLR_SWAP + bool "Memory Resource Controller Swap Extension(EXPERIMENTAL)" + depends on CGROUP_MEM_RES_CTLR && SWAP && EXPERIMENTAL + help + Add swap management feature to memory resource controller. When you + enable this, you can limit mem+swap usage per cgroup. In other words, + when you disable this, memory resource controller has no cares to + usage of swap...a process can exhaust all of the swap. This extension + is useful when you want to avoid exhaustion swap but this itself + adds more overheads and consumes memory for remembering information. + Especially if you use 32bit system or small memory system, please + be careful about enabling this. When memory resource controller + is disabled by boot option, this will be automatically disabled and + there will be no overhead from this. Even when you set this config=y, + if boot option "noswapaccount" is set, swap will not be accounted. + +endif # CGROUPS + +config MM_OWNER + bool + config SYSFS_DEPRECATED bool config SYSFS_DEPRECATED_V2 - bool "Create deprecated sysfs files" + bool "Create deprecated sysfs layout for older userspace tools" depends on SYSFS default y select SYSFS_DEPRECATED help - This option creates deprecated symlinks such as the - "device"-link, the :-link, and the - "bus"-link. It may also add deprecated key in the - uevent environment. - None of these features or values should be used today, as - they export driver core implementation details to userspace - or export properties which can't be kept stable across kernel - releases. - - If enabled, this option will also move any device structures - that belong to a class, back into the /sys/class hierarchy, in - order to support older versions of udev and some userspace - programs. - - If you are using a distro with the most recent userspace - packages, it should be safe to say N here. - -config PROC_PID_CPUSET - bool "Include legacy /proc//cpuset file" - depends on CPUSETS - default y + This option switches the layout of sysfs to the deprecated + version. + + The current sysfs layout features a unified device tree at + /sys/devices/, which is able to express a hierarchy between + class devices. If the deprecated option is set to Y, the + unified device tree is split into a bus device tree at + /sys/devices/ and several individual class device trees at + /sys/class/. The class and bus devices will be connected by + ":" and the "device" links. The "block" + class devices, will not show up in /sys/class/block/. Some + subsystems will suppress the creation of some devices which + depend on the unified device tree. + + This option is not a pure compatibility option that can + be safely enabled on newer distributions. It will change the + layout of sysfs to the non-extensible deprecated version, + and disable some features, which can not be exported without + confusing older userspace tools. Since 2007/2008 all major + distributions do not enable this option, and ship no tools which + depend on the deprecated layout or this option. + + If you are using a new kernel on an older distribution, or use + older userspace tools, you might need to say Y here. Do not say Y, + if the original kernel, that came with your distribution, has + this option set to N. config RELAY bool "Kernel->user space relay support (formerly relayfs)" @@ -504,6 +633,14 @@ config PID_NS Unless you want to work with an experimental feature say N here. +config NET_NS + bool "Network namespace" + default n + depends on NAMESPACES && EXPERIMENTAL && NET + help + Allow user space to create what appear to be multiple instances + of the network stack. + config BLK_DEV_INITRD bool "Initial RAM filesystem and RAM disk (initramfs/initrd) support" depends on BROKEN || !FRV @@ -588,13 +725,6 @@ config KALLSYMS_ALL Say N. -config KALLSYMS_STRIP_GENERATED - bool "Strip machine generated symbols from kallsyms" - depends on KALLSYMS_ALL - default y - help - Say N if you want kallsyms to retain even machine generated symbols. - config KALLSYMS_EXTRA_PASS bool "Do an extra kallsyms pass" depends on KALLSYMS @@ -838,10 +968,6 @@ config RT_MUTEXES boolean select PLIST -config TINY_SHMEM - default !SHMEM - bool - config BASE_SMALL int default 0 if BASE_FULL @@ -916,12 +1042,6 @@ config MODULE_SRCVERSION_ALL the version). With this option, such a "srcversion" field will be created for all modules. If unsure, say N. -config KMOD - def_bool y - help - This is being removed soon. These days, CONFIG_MODULES - implies CONFIG_KMOD, so use that instead. - endif # MODULES config INIT_ALL_POSSIBLE @@ -945,90 +1065,3 @@ source "block/Kconfig" config PREEMPT_NOTIFIERS bool -choice - prompt "RCU Implementation" - default CLASSIC_RCU - -config CLASSIC_RCU - bool "Classic RCU" - help - This option selects the classic RCU implementation that is - designed for best read-side performance on non-realtime - systems. - - Select this option if you are unsure. - -config TREE_RCU - bool "Tree-based hierarchical RCU" - help - This option selects the RCU implementation that is - designed for very large SMP system with hundreds or - thousands of CPUs. - -config PREEMPT_RCU - bool "Preemptible RCU" - depends on PREEMPT - help - This option reduces the latency of the kernel by making certain - RCU sections preemptible. Normally RCU code is non-preemptible, if - this option is selected then read-only RCU sections become - preemptible. This helps latency, but may expose bugs due to - now-naive assumptions about each RCU read-side critical section - remaining on a given CPU through its execution. - -endchoice - -config RCU_TRACE - bool "Enable tracing for RCU" - depends on TREE_RCU || PREEMPT_RCU - help - This option provides tracing in RCU which presents stats - in debugfs for debugging RCU implementation. - - Say Y here if you want to enable RCU tracing - Say N if you are unsure. - -config RCU_FANOUT - int "Tree-based hierarchical RCU fanout value" - range 2 64 if 64BIT - range 2 32 if !64BIT - depends on TREE_RCU - default 64 if 64BIT - default 32 if !64BIT - help - This option controls the fanout of hierarchical implementations - of RCU, allowing RCU to work efficiently on machines with - large numbers of CPUs. This value must be at least the cube - root of NR_CPUS, which allows NR_CPUS up to 32,768 for 32-bit - systems and up to 262,144 for 64-bit systems. - - Select a specific number if testing RCU itself. - Take the default if unsure. - -config RCU_FANOUT_EXACT - bool "Disable tree-based hierarchical RCU auto-balancing" - depends on TREE_RCU - default n - help - This option forces use of the exact RCU_FANOUT value specified, - regardless of imbalances in the hierarchy. This is useful for - testing RCU itself, and might one day be useful on systems with - strong NUMA behavior. - - Without RCU_FANOUT_EXACT, the code will balance the hierarchy. - - Say N if unsure. - -config TREE_RCU_TRACE - def_bool RCU_TRACE && TREE_RCU - select DEBUG_FS - help - This option provides tracing for the TREE_RCU implementation, - permitting Makefile to trivially select kernel/rcutree_trace.c. - -config PREEMPT_RCU_TRACE - def_bool RCU_TRACE && PREEMPT_RCU - select DEBUG_FS - help - This option provides tracing for the PREEMPT_RCU implementation, - permitting Makefile to trivially select kernel/rcupreempt_trace.c.