X-Git-Url: http://ftp.safe.ca/?a=blobdiff_plain;f=init%2FKconfig;h=2cce9f343ad0b6397ba7ce2103a3d8c88eaedd0c;hb=70764a905785ebacc8d44fed7a12fba3db267ae6;hp=fed6dc31b0dae854c26ac29216fc5a08824eaa53;hpb=45e3e1935e2857c54783291107d33323b3ef33c8;p=safe%2Fjmp%2Flinux-2.6 diff --git a/init/Kconfig b/init/Kconfig index fed6dc3..2cce9f3 100644 --- a/init/Kconfig +++ b/init/Kconfig @@ -16,6 +16,11 @@ config DEFCONFIG_LIST default "$ARCH_DEFCONFIG" default "arch/$ARCH/defconfig" +config CONSTRUCTORS + bool + depends on !UML + default y + menu "General setup" config EXPERIMENTAL @@ -110,10 +115,13 @@ config HAVE_KERNEL_BZIP2 config HAVE_KERNEL_LZMA bool +config HAVE_KERNEL_LZO + bool + choice prompt "Kernel compression mode" default KERNEL_GZIP - depends on HAVE_KERNEL_GZIP || HAVE_KERNEL_BZIP2 || HAVE_KERNEL_LZMA + depends on HAVE_KERNEL_GZIP || HAVE_KERNEL_BZIP2 || HAVE_KERNEL_LZMA || HAVE_KERNEL_LZO help The linux kernel is a kind of self-extracting executable. Several compression algorithms are available, which differ @@ -136,9 +144,8 @@ config KERNEL_GZIP bool "Gzip" depends on HAVE_KERNEL_GZIP help - The old and tried gzip compression. Its compression ratio is - the poorest among the 3 choices; however its speed (both - compression and decompression) is the fastest. + The old and tried gzip compression. It provides a good balance + between compression ratio and decompression speed. config KERNEL_BZIP2 bool "Bzip2" @@ -159,6 +166,14 @@ config KERNEL_LZMA two. Compression is slowest. The kernel size is about 33% smaller with LZMA in comparison to gzip. +config KERNEL_LZO + bool "LZO" + depends on HAVE_KERNEL_LZO + help + Its compression ratio is the poorest among the 4. The kernel + size is about about 10% bigger than gzip; however its speed + (both compression and decompression) is the fastest. + endchoice config SWAP @@ -292,7 +307,7 @@ config AUDIT config AUDITSYSCALL bool "Enable system-call auditing support" - depends on AUDIT && (X86 || PPC || PPC64 || S390 || IA64 || UML || SPARC64|| SUPERH) + depends on AUDIT && (X86 || PPC || S390 || IA64 || UML || SPARC64 || SUPERH) default y if SECURITY_SELINUX help Enable low-overhead system-call auditing infrastructure that @@ -311,38 +326,38 @@ choice prompt "RCU Implementation" default TREE_RCU -config CLASSIC_RCU - bool "Classic RCU" - help - This option selects the classic RCU implementation that is - designed for best read-side performance on non-realtime - systems. - - Select this option if you are unsure. - config TREE_RCU bool "Tree-based hierarchical RCU" help This option selects the RCU implementation that is designed for very large SMP system with hundreds or - thousands of CPUs. + thousands of CPUs. It also scales down nicely to + smaller systems. -config PREEMPT_RCU - bool "Preemptible RCU" +config TREE_PREEMPT_RCU + bool "Preemptable tree-based hierarchical RCU" depends on PREEMPT help - This option reduces the latency of the kernel by making certain - RCU sections preemptible. Normally RCU code is non-preemptible, if - this option is selected then read-only RCU sections become - preemptible. This helps latency, but may expose bugs due to - now-naive assumptions about each RCU read-side critical section - remaining on a given CPU through its execution. + This option selects the RCU implementation that is + designed for very large SMP systems with hundreds or + thousands of CPUs, but for which real-time response + is also required. It also scales down nicely to + smaller systems. + +config TINY_RCU + bool "UP-only small-memory-footprint RCU" + depends on !SMP + help + This option selects the RCU implementation that is + designed for UP systems from which real-time response + is not required. This option greatly reduces the + memory footprint of RCU. endchoice config RCU_TRACE bool "Enable tracing for RCU" - depends on TREE_RCU || PREEMPT_RCU + depends on TREE_RCU || TREE_PREEMPT_RCU help This option provides tracing in RCU which presents stats in debugfs for debugging RCU implementation. @@ -354,7 +369,7 @@ config RCU_FANOUT int "Tree-based hierarchical RCU fanout value" range 2 64 if 64BIT range 2 32 if !64BIT - depends on TREE_RCU + depends on TREE_RCU || TREE_PREEMPT_RCU default 64 if 64BIT default 32 if !64BIT help @@ -369,7 +384,7 @@ config RCU_FANOUT config RCU_FANOUT_EXACT bool "Disable tree-based hierarchical RCU auto-balancing" - depends on TREE_RCU + depends on TREE_RCU || TREE_PREEMPT_RCU default n help This option forces use of the exact RCU_FANOUT value specified, @@ -381,19 +396,29 @@ config RCU_FANOUT_EXACT Say N if unsure. -config TREE_RCU_TRACE - def_bool RCU_TRACE && TREE_RCU - select DEBUG_FS +config RCU_FAST_NO_HZ + bool "Accelerate last non-dyntick-idle CPU's grace periods" + depends on TREE_RCU && NO_HZ && SMP + default n help - This option provides tracing for the TREE_RCU implementation, - permitting Makefile to trivially select kernel/rcutree_trace.c. + This option causes RCU to attempt to accelerate grace periods + in order to allow the final CPU to enter dynticks-idle state + more quickly. On the other hand, this option increases the + overhead of the dynticks-idle checking, particularly on systems + with large numbers of CPUs. + + Say Y if energy efficiency is critically important, particularly + if you have relatively few CPUs. + + Say N if you are unsure. -config PREEMPT_RCU_TRACE - def_bool RCU_TRACE && PREEMPT_RCU +config TREE_RCU_TRACE + def_bool RCU_TRACE && ( TREE_RCU || TREE_PREEMPT_RCU ) select DEBUG_FS help - This option provides tracing for the PREEMPT_RCU implementation, - permitting Makefile to trivially select kernel/rcupreempt_trace.c. + This option provides tracing for the TREE_RCU and + TREE_PREEMPT_RCU implementations, permitting Makefile to + trivially select kernel/rcutree_trace.c. endmenu # "RCU Subsystem" @@ -436,59 +461,9 @@ config LOG_BUF_SHIFT config HAVE_UNSTABLE_SCHED_CLOCK bool -config GROUP_SCHED - bool "Group CPU scheduler" - depends on EXPERIMENTAL - default n - help - This feature lets CPU scheduler recognize task groups and control CPU - bandwidth allocation to such task groups. - In order to create a group from arbitrary set of processes, use - CONFIG_CGROUPS. (See Control Group support.) - -config FAIR_GROUP_SCHED - bool "Group scheduling for SCHED_OTHER" - depends on GROUP_SCHED - default GROUP_SCHED - -config RT_GROUP_SCHED - bool "Group scheduling for SCHED_RR/FIFO" - depends on EXPERIMENTAL - depends on GROUP_SCHED - default n - help - This feature lets you explicitly allocate real CPU bandwidth - to users or control groups (depending on the "Basis for grouping tasks" - setting below. If enabled, it will also make it impossible to - schedule realtime tasks for non-root users until you allocate - realtime bandwidth for them. - See Documentation/scheduler/sched-rt-group.txt for more information. - -choice - depends on GROUP_SCHED - prompt "Basis for grouping tasks" - default USER_SCHED - -config USER_SCHED - bool "user id" - help - This option will choose userid as the basis for grouping - tasks, thus providing equal CPU bandwidth to each user. - -config CGROUP_SCHED - bool "Control groups" - depends on CGROUPS - help - This option allows you to create arbitrary task groups - using the "cgroup" pseudo filesystem and control - the cpu bandwidth allocated to each such task group. - Refer to Documentation/cgroups/cgroups.txt for more - information on "cgroup" pseudo filesystem. - -endchoice - menuconfig CGROUPS boolean "Control Group support" + depends on EVENTFD help This option adds support for grouping sets of processes together, for use with process control subsystems such as Cpusets, CFS, memory @@ -607,6 +582,62 @@ config CGROUP_MEM_RES_CTLR_SWAP Now, memory usage of swap_cgroup is 2 bytes per entry. If swap page size is 4096bytes, 512k per 1Gbytes of swap. +menuconfig CGROUP_SCHED + bool "Group CPU scheduler" + depends on EXPERIMENTAL && CGROUPS + default n + help + This feature lets CPU scheduler recognize task groups and control CPU + bandwidth allocation to such task groups. It uses cgroups to group + tasks. + +if CGROUP_SCHED +config FAIR_GROUP_SCHED + bool "Group scheduling for SCHED_OTHER" + depends on CGROUP_SCHED + default CGROUP_SCHED + +config RT_GROUP_SCHED + bool "Group scheduling for SCHED_RR/FIFO" + depends on EXPERIMENTAL + depends on CGROUP_SCHED + default n + help + This feature lets you explicitly allocate real CPU bandwidth + to task groups. If enabled, it will also make it impossible to + schedule realtime tasks for non-root users until you allocate + realtime bandwidth for them. + See Documentation/scheduler/sched-rt-group.txt for more information. + +endif #CGROUP_SCHED + +config BLK_CGROUP + tristate "Block IO controller" + depends on CGROUPS && BLOCK + default n + ---help--- + Generic block IO controller cgroup interface. This is the common + cgroup interface which should be used by various IO controlling + policies. + + Currently, CFQ IO scheduler uses it to recognize task groups and + control disk bandwidth allocation (proportional time slice allocation) + to such task groups. + + This option only enables generic Block IO controller infrastructure. + One needs to also enable actual IO controlling logic in CFQ for it + to take effect. (CONFIG_CFQ_GROUP_IOSCHED=y). + + See Documentation/cgroups/blkio-controller.txt for more information. + +config DEBUG_BLK_CGROUP + bool "Enable Block IO controller debugging" + depends on BLK_CGROUP + default n + ---help--- + Enable some debugging help. Currently it exports additional stat + files in a cgroup which can be useful for debugging. + endif # CGROUPS config MM_OWNER @@ -616,13 +647,13 @@ config SYSFS_DEPRECATED bool config SYSFS_DEPRECATED_V2 - bool "Create deprecated sysfs layout for older userspace tools" + bool "enable deprecated sysfs features to support old userspace tools" depends on SYSFS - default y + default n select SYSFS_DEPRECATED help This option switches the layout of sysfs to the deprecated - version. + version. Do not use it on recent distributions. The current sysfs layout features a unified device tree at /sys/devices/, which is able to express a hierarchy between @@ -764,6 +795,7 @@ config UID16 config SYSCTL_SYSCALL bool "Sysctl syscall support" if EMBEDDED + depends on PROC_SYSCTL default y select SYSCTL ---help--- @@ -926,39 +958,70 @@ config AIO by some high performance threaded applications. Disabling this option saves about 7k. -config HAVE_PERF_COUNTERS +config HAVE_PERF_EVENTS bool help See tools/perf/design.txt for details. -menu "Performance Counters" +config PERF_USE_VMALLOC + bool + help + See tools/perf/design.txt for details -config PERF_COUNTERS - bool "Kernel Performance Counters" - depends on HAVE_PERF_COUNTERS +menu "Kernel Performance Events And Counters" + +config PERF_EVENTS + bool "Kernel performance events and counters" + default y if (PROFILING || PERF_COUNTERS) + depends on HAVE_PERF_EVENTS select ANON_INODES help - Enable kernel support for performance counter hardware. + Enable kernel support for various performance events provided + by software and hardware. - Performance counters are special hardware registers available - on most modern CPUs. These registers count the number of certain + Software events are supported either built-in or via the + use of generic tracepoints. + + Most modern CPUs support performance events via performance + counter registers. These registers count the number of certain types of hw events: such as instructions executed, cachemisses suffered, or branches mis-predicted - without slowing down the kernel or applications. These registers can also trigger interrupts when a threshold number of events have passed - and can thus be used to profile the code that runs on that CPU. - The Linux Performance Counter subsystem provides an abstraction of - these hardware capabilities, available via a system call. It + The Linux Performance Event subsystem provides an abstraction of + these software and hardware event capabilities, available via a + system call and used by the "perf" utility in tools/perf/. It provides per task and per CPU counters, and it provides event capabilities on top of those. Say Y if unsure. -config EVENT_PROFILE - bool "Tracepoint profile sources" - depends on PERF_COUNTERS && EVENT_TRACER - default y +config PERF_COUNTERS + bool "Kernel performance counters (old config option)" + depends on HAVE_PERF_EVENTS + help + This config has been obsoleted by the PERF_EVENTS + config option - please see that one for details. + + It has no effect on the kernel whether you enable + it or not, it is a compatibility placeholder. + + Say N if unsure. + +config DEBUG_PERF_USE_VMALLOC + default n + bool "Debug: use vmalloc to back perf mmap() buffers" + depends on PERF_EVENTS && DEBUG_KERNEL + select PERF_USE_VMALLOC + help + Use vmalloc memory to back perf mmap() buffers. + + Mostly useful for debugging the vmalloc code on platforms + that don't require it. + + Say N if unsure. endmenu @@ -990,14 +1053,6 @@ config SLUB_DEBUG SLUB sysfs support. /sys/slab will not exist and there will be no support for cache validation etc. -config STRIP_ASM_SYMS - bool "Strip assembler-generated symbols during link" - default n - help - Strip internal assembler-generated symbols during a link (symbols - that look like '.Lxxx') so they don't pollute the output of - get_wchan() and suchlike. - config COMPAT_BRK bool "Disable heap randomization" default y @@ -1043,8 +1098,30 @@ config SLOB endchoice +config MMAP_ALLOW_UNINITIALIZED + bool "Allow mmapped anonymous memory to be uninitialized" + depends on EMBEDDED && !MMU + default n + help + Normally, and according to the Linux spec, anonymous memory obtained + from mmap() has it's contents cleared before it is passed to + userspace. Enabling this config option allows you to request that + mmap() skip that if it is given an MAP_UNINITIALIZED flag, thus + providing a huge performance boost. If this option is not enabled, + then the flag will be ignored. + + This is taken advantage of by uClibc's malloc(), and also by + ELF-FDPIC binfmt's brk and stack allocator. + + Because of the obvious security issues, this option should only be + enabled on embedded devices where you control what is run in + userspace. Since that isn't generally a problem on no-MMU systems, + it is normally safe to say Y here. + + See Documentation/nommu-mmap.txt for more information. + config PROFILING - bool "Profiling support (EXPERIMENTAL)" + bool "Profiling support" help Say Y here to enable the extended profiling support mechanisms used by profilers such as OProfile. @@ -1056,13 +1133,6 @@ config PROFILING config TRACEPOINTS bool -config MARKERS - bool "Activate markers" - select TRACEPOINTS - help - Place an empty function call at each marker site. Can be - dynamically changed for a probe function. - source "arch/Kconfig" config SLOW_WORK @@ -1079,6 +1149,16 @@ config SLOW_WORK See Documentation/slow-work.txt. +config SLOW_WORK_DEBUG + bool "Slow work debugging through debugfs" + default n + depends on SLOW_WORK && DEBUG_FS + help + Display the contents of the slow work run queue through debugfs, + including items currently executing. + + See Documentation/slow-work.txt. + endmenu # General setup config HAVE_GENERIC_DMA_COHERENT @@ -1191,3 +1271,8 @@ source "block/Kconfig" config PREEMPT_NOTIFIERS bool +config PADATA + depends on SMP + bool + +source "kernel/Kconfig.locks"