X-Git-Url: http://ftp.safe.ca/?a=blobdiff_plain;f=include%2Fnet%2Fcfg80211.h;h=5b3569b2a74c9b1ff73bd30b0dff0619fb08bfe6;hb=33e5a2f776e331dc8a4379b6efb660d38f182d96;hp=f19c3e16366364a709bc0e98d2be40db950a5050;hpb=0378b3f1c49d48ed524eabda7e4340163d9483c9;p=safe%2Fjmp%2Flinux-2.6 diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index f19c3e1..5b3569b 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -1,67 +1,220 @@ #ifndef __NET_CFG80211_H #define __NET_CFG80211_H +/* + * 802.11 device and configuration interface + * + * Copyright 2006-2009 Johannes Berg + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include +#include +#include #include #include #include -#include +#include +#include +#include + /* remove once we remove the wext stuff */ #include +#include + /* - * 802.11 configuration in-kernel interface + * wireless hardware capability structures + */ + +/** + * enum ieee80211_band - supported frequency bands + * + * The bands are assigned this way because the supported + * bitrates differ in these bands. * - * Copyright 2006, 2007 Johannes Berg + * @IEEE80211_BAND_2GHZ: 2.4GHz ISM band + * @IEEE80211_BAND_5GHZ: around 5GHz band (4.9-5.7) */ +enum ieee80211_band { + IEEE80211_BAND_2GHZ = NL80211_BAND_2GHZ, + IEEE80211_BAND_5GHZ = NL80211_BAND_5GHZ, + + /* keep last */ + IEEE80211_NUM_BANDS +}; /** - * struct vif_params - describes virtual interface parameters - * @mesh_id: mesh ID to use - * @mesh_id_len: length of the mesh ID + * enum ieee80211_channel_flags - channel flags + * + * Channel flags set by the regulatory control code. + * + * @IEEE80211_CHAN_DISABLED: This channel is disabled. + * @IEEE80211_CHAN_PASSIVE_SCAN: Only passive scanning is permitted + * on this channel. + * @IEEE80211_CHAN_NO_IBSS: IBSS is not allowed on this channel. + * @IEEE80211_CHAN_RADAR: Radar detection is required on this channel. + * @IEEE80211_CHAN_NO_HT40PLUS: extension channel above this channel + * is not permitted. + * @IEEE80211_CHAN_NO_HT40MINUS: extension channel below this channel + * is not permitted. */ -struct vif_params { - u8 *mesh_id; - int mesh_id_len; +enum ieee80211_channel_flags { + IEEE80211_CHAN_DISABLED = 1<<0, + IEEE80211_CHAN_PASSIVE_SCAN = 1<<1, + IEEE80211_CHAN_NO_IBSS = 1<<2, + IEEE80211_CHAN_RADAR = 1<<3, + IEEE80211_CHAN_NO_HT40PLUS = 1<<4, + IEEE80211_CHAN_NO_HT40MINUS = 1<<5, }; -/* Radiotap header iteration - * implemented in net/wireless/radiotap.c - * docs in Documentation/networking/radiotap-headers.txt +#define IEEE80211_CHAN_NO_HT40 \ + (IEEE80211_CHAN_NO_HT40PLUS | IEEE80211_CHAN_NO_HT40MINUS) + +/** + * struct ieee80211_channel - channel definition + * + * This structure describes a single channel for use + * with cfg80211. + * + * @center_freq: center frequency in MHz + * @hw_value: hardware-specific value for the channel + * @flags: channel flags from &enum ieee80211_channel_flags. + * @orig_flags: channel flags at registration time, used by regulatory + * code to support devices with additional restrictions + * @band: band this channel belongs to. + * @max_antenna_gain: maximum antenna gain in dBi + * @max_power: maximum transmission power (in dBm) + * @beacon_found: helper to regulatory code to indicate when a beacon + * has been found on this channel. Use regulatory_hint_found_beacon() + * to enable this, this is is useful only on 5 GHz band. + * @orig_mag: internal use + * @orig_mpwr: internal use */ +struct ieee80211_channel { + enum ieee80211_band band; + u16 center_freq; + u16 hw_value; + u32 flags; + int max_antenna_gain; + int max_power; + bool beacon_found; + u32 orig_flags; + int orig_mag, orig_mpwr; +}; + /** - * struct ieee80211_radiotap_iterator - tracks walk thru present radiotap args - * @rtheader: pointer to the radiotap header we are walking through - * @max_length: length of radiotap header in cpu byte ordering - * @this_arg_index: IEEE80211_RADIOTAP_... index of current arg - * @this_arg: pointer to current radiotap arg - * @arg_index: internal next argument index - * @arg: internal next argument pointer - * @next_bitmap: internal pointer to next present u32 - * @bitmap_shifter: internal shifter for curr u32 bitmap, b0 set == arg present + * enum ieee80211_rate_flags - rate flags + * + * Hardware/specification flags for rates. These are structured + * in a way that allows using the same bitrate structure for + * different bands/PHY modes. + * + * @IEEE80211_RATE_SHORT_PREAMBLE: Hardware can send with short + * preamble on this bitrate; only relevant in 2.4GHz band and + * with CCK rates. + * @IEEE80211_RATE_MANDATORY_A: This bitrate is a mandatory rate + * when used with 802.11a (on the 5 GHz band); filled by the + * core code when registering the wiphy. + * @IEEE80211_RATE_MANDATORY_B: This bitrate is a mandatory rate + * when used with 802.11b (on the 2.4 GHz band); filled by the + * core code when registering the wiphy. + * @IEEE80211_RATE_MANDATORY_G: This bitrate is a mandatory rate + * when used with 802.11g (on the 2.4 GHz band); filled by the + * core code when registering the wiphy. + * @IEEE80211_RATE_ERP_G: This is an ERP rate in 802.11g mode. */ +enum ieee80211_rate_flags { + IEEE80211_RATE_SHORT_PREAMBLE = 1<<0, + IEEE80211_RATE_MANDATORY_A = 1<<1, + IEEE80211_RATE_MANDATORY_B = 1<<2, + IEEE80211_RATE_MANDATORY_G = 1<<3, + IEEE80211_RATE_ERP_G = 1<<4, +}; -struct ieee80211_radiotap_iterator { - struct ieee80211_radiotap_header *rtheader; - int max_length; - int this_arg_index; - u8 *this_arg; +/** + * struct ieee80211_rate - bitrate definition + * + * This structure describes a bitrate that an 802.11 PHY can + * operate with. The two values @hw_value and @hw_value_short + * are only for driver use when pointers to this structure are + * passed around. + * + * @flags: rate-specific flags + * @bitrate: bitrate in units of 100 Kbps + * @hw_value: driver/hardware value for this rate + * @hw_value_short: driver/hardware value for this rate when + * short preamble is used + */ +struct ieee80211_rate { + u32 flags; + u16 bitrate; + u16 hw_value, hw_value_short; +}; - int arg_index; - u8 *arg; - __le32 *next_bitmap; - u32 bitmap_shifter; +/** + * struct ieee80211_sta_ht_cap - STA's HT capabilities + * + * This structure describes most essential parameters needed + * to describe 802.11n HT capabilities for an STA. + * + * @ht_supported: is HT supported by the STA + * @cap: HT capabilities map as described in 802.11n spec + * @ampdu_factor: Maximum A-MPDU length factor + * @ampdu_density: Minimum A-MPDU spacing + * @mcs: Supported MCS rates + */ +struct ieee80211_sta_ht_cap { + u16 cap; /* use IEEE80211_HT_CAP_ */ + bool ht_supported; + u8 ampdu_factor; + u8 ampdu_density; + struct ieee80211_mcs_info mcs; }; -extern int ieee80211_radiotap_iterator_init( - struct ieee80211_radiotap_iterator *iterator, - struct ieee80211_radiotap_header *radiotap_header, - int max_length); +/** + * struct ieee80211_supported_band - frequency band definition + * + * This structure describes a frequency band a wiphy + * is able to operate in. + * + * @channels: Array of channels the hardware can operate in + * in this band. + * @band: the band this structure represents + * @n_channels: Number of channels in @channels + * @bitrates: Array of bitrates the hardware can operate with + * in this band. Must be sorted to give a valid "supported + * rates" IE, i.e. CCK rates first, then OFDM. + * @n_bitrates: Number of bitrates in @bitrates + */ +struct ieee80211_supported_band { + struct ieee80211_channel *channels; + struct ieee80211_rate *bitrates; + enum ieee80211_band band; + int n_channels; + int n_bitrates; + struct ieee80211_sta_ht_cap ht_cap; +}; -extern int ieee80211_radiotap_iterator_next( - struct ieee80211_radiotap_iterator *iterator); +/* + * Wireless hardware/device configuration structures and methods + */ +/** + * struct vif_params - describes virtual interface parameters + * @mesh_id: mesh ID to use + * @mesh_id_len: length of the mesh ID + * @use_4addr: use 4-address frames + */ +struct vif_params { + u8 *mesh_id; + int mesh_id_len; + int use_4addr; +}; - /** +/** * struct key_params - key information * * Information about a key @@ -82,6 +235,35 @@ struct key_params { }; /** + * enum survey_info_flags - survey information flags + * + * Used by the driver to indicate which info in &struct survey_info + * it has filled in during the get_survey(). + */ +enum survey_info_flags { + SURVEY_INFO_NOISE_DBM = 1<<0, +}; + +/** + * struct survey_info - channel survey response + * + * Used by dump_survey() to report back per-channel survey information. + * + * @channel: the channel this survey record reports, mandatory + * @filled: bitflag of flags from &enum survey_info_flags + * @noise: channel noise in dBm. This and all following fields are + * optional + * + * This structure can later be expanded with things like + * channel duty cycle etc. + */ +struct survey_info { + struct ieee80211_channel *channel; + u32 filled; + s8 noise; +}; + +/** * struct beacon_parameters - beacon parameters * * Used to configure the beacon for an interface. @@ -102,27 +284,6 @@ struct beacon_parameters { }; /** - * enum station_flags - station flags - * - * Station capability flags. Note that these must be the bits - * according to the nl80211 flags. - * - * @STATION_FLAG_CHANGED: station flags were changed - * @STATION_FLAG_AUTHORIZED: station is authorized to send frames (802.1X) - * @STATION_FLAG_SHORT_PREAMBLE: station is capable of receiving frames - * with short preambles - * @STATION_FLAG_WME: station is WME/QoS capable - * @STATION_FLAG_MFP: station uses management frame protection - */ -enum station_flags { - STATION_FLAG_CHANGED = 1<<0, - STATION_FLAG_AUTHORIZED = 1<bss_priv_size bytes + */ +struct cfg80211_bss { + struct ieee80211_channel *channel; -/* from net/ieee80211.h */ -struct ieee80211_channel; + u8 bssid[ETH_ALEN]; + u64 tsf; + u16 beacon_interval; + u16 capability; + u8 *information_elements; + size_t len_information_elements; + u8 *beacon_ies; + size_t len_beacon_ies; + u8 *proberesp_ies; + size_t len_proberesp_ies; + + s32 signal; + + void (*free_priv)(struct cfg80211_bss *bss); + u8 priv[0] __attribute__((__aligned__(sizeof(void *)))); +}; + +/** + * ieee80211_bss_get_ie - find IE with given ID + * @bss: the bss to search + * @ie: the IE ID + * Returns %NULL if not found. + */ +const u8 *ieee80211_bss_get_ie(struct cfg80211_bss *bss, u8 ie); + + +/** + * struct cfg80211_crypto_settings - Crypto settings + * @wpa_versions: indicates which, if any, WPA versions are enabled + * (from enum nl80211_wpa_versions) + * @cipher_group: group key cipher suite (or 0 if unset) + * @n_ciphers_pairwise: number of AP supported unicast ciphers + * @ciphers_pairwise: unicast key cipher suites + * @n_akm_suites: number of AKM suites + * @akm_suites: AKM suites + * @control_port: Whether user space controls IEEE 802.1X port, i.e., + * sets/clears %NL80211_STA_FLAG_AUTHORIZED. If true, the driver is + * required to assume that the port is unauthorized until authorized by + * user space. Otherwise, port is marked authorized by default. + */ +struct cfg80211_crypto_settings { + u32 wpa_versions; + u32 cipher_group; + int n_ciphers_pairwise; + u32 ciphers_pairwise[NL80211_MAX_NR_CIPHER_SUITES]; + int n_akm_suites; + u32 akm_suites[NL80211_MAX_NR_AKM_SUITES]; + bool control_port; +}; + +/** + * struct cfg80211_auth_request - Authentication request data + * + * This structure provides information needed to complete IEEE 802.11 + * authentication. + * + * @bss: The BSS to authenticate with. + * @auth_type: Authentication type (algorithm) + * @ie: Extra IEs to add to Authentication frame or %NULL + * @ie_len: Length of ie buffer in octets + * @key_len: length of WEP key for shared key authentication + * @key_idx: index of WEP key for shared key authentication + * @key: WEP key for shared key authentication + */ +struct cfg80211_auth_request { + struct cfg80211_bss *bss; + const u8 *ie; + size_t ie_len; + enum nl80211_auth_type auth_type; + const u8 *key; + u8 key_len, key_idx; +}; + +/** + * struct cfg80211_assoc_request - (Re)Association request data + * + * This structure provides information needed to complete IEEE 802.11 + * (re)association. + * @bss: The BSS to associate with. + * @ie: Extra IEs to add to (Re)Association Request frame or %NULL + * @ie_len: Length of ie buffer in octets + * @use_mfp: Use management frame protection (IEEE 802.11w) in this association + * @crypto: crypto settings + * @prev_bssid: previous BSSID, if not %NULL use reassociate frame + */ +struct cfg80211_assoc_request { + struct cfg80211_bss *bss; + const u8 *ie, *prev_bssid; + size_t ie_len; + struct cfg80211_crypto_settings crypto; + bool use_mfp; +}; + +/** + * struct cfg80211_deauth_request - Deauthentication request data + * + * This structure provides information needed to complete IEEE 802.11 + * deauthentication. + * + * @bss: the BSS to deauthenticate from + * @ie: Extra IEs to add to Deauthentication frame or %NULL + * @ie_len: Length of ie buffer in octets + * @reason_code: The reason code for the deauthentication + */ +struct cfg80211_deauth_request { + struct cfg80211_bss *bss; + const u8 *ie; + size_t ie_len; + u16 reason_code; +}; + +/** + * struct cfg80211_disassoc_request - Disassociation request data + * + * This structure provides information needed to complete IEEE 802.11 + * disassocation. + * + * @bss: the BSS to disassociate from + * @ie: Extra IEs to add to Disassociation frame or %NULL + * @ie_len: Length of ie buffer in octets + * @reason_code: The reason code for the disassociation + */ +struct cfg80211_disassoc_request { + struct cfg80211_bss *bss; + const u8 *ie; + size_t ie_len; + u16 reason_code; +}; + +/** + * struct cfg80211_ibss_params - IBSS parameters + * + * This structure defines the IBSS parameters for the join_ibss() + * method. + * + * @ssid: The SSID, will always be non-null. + * @ssid_len: The length of the SSID, will always be non-zero. + * @bssid: Fixed BSSID requested, maybe be %NULL, if set do not + * search for IBSSs with a different BSSID. + * @channel: The channel to use if no IBSS can be found to join. + * @channel_fixed: The channel should be fixed -- do not search for + * IBSSs to join on other channels. + * @ie: information element(s) to include in the beacon + * @ie_len: length of that + * @beacon_interval: beacon interval to use + * @privacy: this is a protected network, keys will be configured + * after joining + */ +struct cfg80211_ibss_params { + u8 *ssid; + u8 *bssid; + struct ieee80211_channel *channel; + u8 *ie; + u8 ssid_len, ie_len; + u16 beacon_interval; + bool channel_fixed; + bool privacy; +}; + +/** + * struct cfg80211_connect_params - Connection parameters + * + * This structure provides information needed to complete IEEE 802.11 + * authentication and association. + * + * @channel: The channel to use or %NULL if not specified (auto-select based + * on scan results) + * @bssid: The AP BSSID or %NULL if not specified (auto-select based on scan + * results) + * @ssid: SSID + * @ssid_len: Length of ssid in octets + * @auth_type: Authentication type (algorithm) + * @assoc_ie: IEs for association request + * @assoc_ie_len: Length of assoc_ie in octets + * @privacy: indicates whether privacy-enabled APs should be used + * @crypto: crypto settings + * @key_len: length of WEP key for shared key authentication + * @key_idx: index of WEP key for shared key authentication + * @key: WEP key for shared key authentication + */ +struct cfg80211_connect_params { + struct ieee80211_channel *channel; + u8 *bssid; + u8 *ssid; + size_t ssid_len; + enum nl80211_auth_type auth_type; + u8 *ie; + size_t ie_len; + bool privacy; + struct cfg80211_crypto_settings crypto; + const u8 *key; + u8 key_len, key_idx; +}; + +/** + * enum wiphy_params_flags - set_wiphy_params bitfield values + * WIPHY_PARAM_RETRY_SHORT: wiphy->retry_short has changed + * WIPHY_PARAM_RETRY_LONG: wiphy->retry_long has changed + * WIPHY_PARAM_FRAG_THRESHOLD: wiphy->frag_threshold has changed + * WIPHY_PARAM_RTS_THRESHOLD: wiphy->rts_threshold has changed + */ +enum wiphy_params_flags { + WIPHY_PARAM_RETRY_SHORT = 1 << 0, + WIPHY_PARAM_RETRY_LONG = 1 << 1, + WIPHY_PARAM_FRAG_THRESHOLD = 1 << 2, + WIPHY_PARAM_RTS_THRESHOLD = 1 << 3, + WIPHY_PARAM_COVERAGE_CLASS = 1 << 4, +}; + +/** + * enum tx_power_setting - TX power adjustment + * + * @TX_POWER_AUTOMATIC: the dbm parameter is ignored + * @TX_POWER_LIMITED: limit TX power by the dbm parameter + * @TX_POWER_FIXED: fix TX power to the dbm parameter + */ +enum tx_power_setting { + TX_POWER_AUTOMATIC, + TX_POWER_LIMITED, + TX_POWER_FIXED, +}; + +/* + * cfg80211_bitrate_mask - masks for bitrate control + */ +struct cfg80211_bitrate_mask { + struct { + u32 legacy; + /* TODO: add support for masking MCS rates; e.g.: */ + /* u8 mcs[IEEE80211_HT_MCS_MASK_LEN]; */ + } control[IEEE80211_NUM_BANDS]; +}; +/** + * struct cfg80211_pmksa - PMK Security Association + * + * This structure is passed to the set/del_pmksa() method for PMKSA + * caching. + * + * @bssid: The AP's BSSID. + * @pmkid: The PMK material itself. + */ +struct cfg80211_pmksa { + u8 *bssid; + u8 *pmkid; +}; /** * struct cfg80211_ops - backend description for wireless configuration @@ -476,7 +904,8 @@ struct ieee80211_channel; * @resume: wiphy device needs to be resumed * * @add_virtual_intf: create a new virtual interface with the given name, - * must set the struct wireless_dev's iftype. + * must set the struct wireless_dev's iftype. Beware: You must create + * the new netdev in the wiphy's network namespace! * * @del_virtual_intf: remove the virtual interface determined by ifindex. * @@ -489,10 +918,11 @@ struct ieee80211_channel; * @get_key: get information about the key with the given parameters. * @mac_addr will be %NULL when requesting information for a group * key. All pointers given to the @callback function need not be valid - * after it returns. + * after it returns. This function should return an error if it is + * not possible to retrieve the key, -ENOENT if it doesn't exist. * * @del_key: remove a key given the @mac_addr (%NULL for a group key) - * and @key_index + * and @key_index, return -ENOENT if the key doesn't exist. * * @set_default_key: set the default key on an interface * @@ -525,7 +955,58 @@ struct ieee80211_channel; * * @set_channel: Set channel * - * @set_mgmt_extra_ie: Set extra IE data for management frames + * @scan: Request to do a scan. If returning zero, the scan request is given + * the driver, and will be valid until passed to cfg80211_scan_done(). + * For scan results, call cfg80211_inform_bss(); you can call this outside + * the scan/scan_done bracket too. + * + * @auth: Request to authenticate with the specified peer + * @assoc: Request to (re)associate with the specified peer + * @deauth: Request to deauthenticate from the specified peer + * @disassoc: Request to disassociate from the specified peer + * + * @connect: Connect to the ESS with the specified parameters. When connected, + * call cfg80211_connect_result() with status code %WLAN_STATUS_SUCCESS. + * If the connection fails for some reason, call cfg80211_connect_result() + * with the status from the AP. + * @disconnect: Disconnect from the BSS/ESS. + * + * @join_ibss: Join the specified IBSS (or create if necessary). Once done, call + * cfg80211_ibss_joined(), also call that function when changing BSSID due + * to a merge. + * @leave_ibss: Leave the IBSS. + * + * @set_wiphy_params: Notify that wiphy parameters have changed; + * @changed bitfield (see &enum wiphy_params_flags) describes which values + * have changed. The actual parameter values are available in + * struct wiphy. If returning an error, no value should be changed. + * + * @set_tx_power: set the transmit power according to the parameters + * @get_tx_power: store the current TX power into the dbm variable; + * return 0 if successful + * + * @rfkill_poll: polls the hw rfkill line, use cfg80211 reporting + * functions to adjust rfkill hw state + * + * @dump_survey: get site survey information. + * + * @remain_on_channel: Request the driver to remain awake on the specified + * channel for the specified duration to complete an off-channel + * operation (e.g., public action frame exchange). When the driver is + * ready on the requested channel, it must indicate this with an event + * notification by calling cfg80211_ready_on_channel(). + * @cancel_remain_on_channel: Cancel an on-going remain-on-channel operation. + * This allows the operation to be terminated prior to timeout based on + * the duration value. + * + * @testmode_cmd: run a test mode command + * + * @set_pmksa: Cache a PMKID for a BSSID. This is mostly useful for fullmac + * devices running firmwares capable of generating the (re) association + * RSN IE. It allows for faster roaming between WPA2 BSSIDs. + * @del_pmksa: Delete a cached PMKID. + * @flush_pmksa: Flush all cached PMKIDs. + * */ struct cfg80211_ops { int (*suspend)(struct wiphy *wiphy); @@ -534,19 +1015,20 @@ struct cfg80211_ops { int (*add_virtual_intf)(struct wiphy *wiphy, char *name, enum nl80211_iftype type, u32 *flags, struct vif_params *params); - int (*del_virtual_intf)(struct wiphy *wiphy, int ifindex); - int (*change_virtual_intf)(struct wiphy *wiphy, int ifindex, + int (*del_virtual_intf)(struct wiphy *wiphy, struct net_device *dev); + int (*change_virtual_intf)(struct wiphy *wiphy, + struct net_device *dev, enum nl80211_iftype type, u32 *flags, struct vif_params *params); int (*add_key)(struct wiphy *wiphy, struct net_device *netdev, - u8 key_index, u8 *mac_addr, + u8 key_index, const u8 *mac_addr, struct key_params *params); int (*get_key)(struct wiphy *wiphy, struct net_device *netdev, - u8 key_index, u8 *mac_addr, void *cookie, + u8 key_index, const u8 *mac_addr, void *cookie, void (*callback)(void *cookie, struct key_params*)); int (*del_key)(struct wiphy *wiphy, struct net_device *netdev, - u8 key_index, u8 *mac_addr); + u8 key_index, const u8 *mac_addr); int (*set_default_key)(struct wiphy *wiphy, struct net_device *netdev, u8 key_index); @@ -600,18 +1082,1213 @@ struct cfg80211_ops { struct ieee80211_channel *chan, enum nl80211_channel_type channel_type); - int (*set_mgmt_extra_ie)(struct wiphy *wiphy, + int (*scan)(struct wiphy *wiphy, struct net_device *dev, + struct cfg80211_scan_request *request); + + int (*auth)(struct wiphy *wiphy, struct net_device *dev, + struct cfg80211_auth_request *req); + int (*assoc)(struct wiphy *wiphy, struct net_device *dev, + struct cfg80211_assoc_request *req); + int (*deauth)(struct wiphy *wiphy, struct net_device *dev, + struct cfg80211_deauth_request *req, + void *cookie); + int (*disassoc)(struct wiphy *wiphy, struct net_device *dev, + struct cfg80211_disassoc_request *req, + void *cookie); + + int (*connect)(struct wiphy *wiphy, struct net_device *dev, + struct cfg80211_connect_params *sme); + int (*disconnect)(struct wiphy *wiphy, struct net_device *dev, + u16 reason_code); + + int (*join_ibss)(struct wiphy *wiphy, struct net_device *dev, + struct cfg80211_ibss_params *params); + int (*leave_ibss)(struct wiphy *wiphy, struct net_device *dev); + + int (*set_wiphy_params)(struct wiphy *wiphy, u32 changed); + + int (*set_tx_power)(struct wiphy *wiphy, + enum tx_power_setting type, int dbm); + int (*get_tx_power)(struct wiphy *wiphy, int *dbm); + + int (*set_wds_peer)(struct wiphy *wiphy, struct net_device *dev, + u8 *addr); + + void (*rfkill_poll)(struct wiphy *wiphy); + +#ifdef CONFIG_NL80211_TESTMODE + int (*testmode_cmd)(struct wiphy *wiphy, void *data, int len); +#endif + + int (*set_bitrate_mask)(struct wiphy *wiphy, + struct net_device *dev, + const u8 *peer, + const struct cfg80211_bitrate_mask *mask); + + int (*dump_survey)(struct wiphy *wiphy, struct net_device *netdev, + int idx, struct survey_info *info); + + int (*set_pmksa)(struct wiphy *wiphy, struct net_device *netdev, + struct cfg80211_pmksa *pmksa); + int (*del_pmksa)(struct wiphy *wiphy, struct net_device *netdev, + struct cfg80211_pmksa *pmksa); + int (*flush_pmksa)(struct wiphy *wiphy, struct net_device *netdev); + + int (*remain_on_channel)(struct wiphy *wiphy, struct net_device *dev, - struct mgmt_extra_ie_params *params); + struct ieee80211_channel *chan, + enum nl80211_channel_type channel_type, + unsigned int duration, + u64 *cookie); + int (*cancel_remain_on_channel)(struct wiphy *wiphy, + struct net_device *dev, + u64 cookie); + + /* some temporary stuff to finish wext */ + int (*set_power_mgmt)(struct wiphy *wiphy, struct net_device *dev, + bool enabled, int timeout); }; -/* temporary wext handlers */ -int cfg80211_wext_giwname(struct net_device *dev, - struct iw_request_info *info, - char *name, char *extra); -int cfg80211_wext_siwmode(struct net_device *dev, struct iw_request_info *info, - u32 *mode, char *extra); -int cfg80211_wext_giwmode(struct net_device *dev, struct iw_request_info *info, - u32 *mode, char *extra); +/* + * wireless hardware and networking interfaces structures + * and registration/helper functions + */ + +/** + * enum wiphy_flags - wiphy capability flags + * + * @WIPHY_FLAG_CUSTOM_REGULATORY: tells us the driver for this device + * has its own custom regulatory domain and cannot identify the + * ISO / IEC 3166 alpha2 it belongs to. When this is enabled + * we will disregard the first regulatory hint (when the + * initiator is %REGDOM_SET_BY_CORE). + * @WIPHY_FLAG_STRICT_REGULATORY: tells us the driver for this device will + * ignore regulatory domain settings until it gets its own regulatory + * domain via its regulatory_hint(). After its gets its own regulatory + * domain it will only allow further regulatory domain settings to + * further enhance compliance. For example if channel 13 and 14 are + * disabled by this regulatory domain no user regulatory domain can + * enable these channels at a later time. This can be used for devices + * which do not have calibration information gauranteed for frequencies + * or settings outside of its regulatory domain. + * @WIPHY_FLAG_DISABLE_BEACON_HINTS: enable this if your driver needs to ensure + * that passive scan flags and beaconing flags may not be lifted by + * cfg80211 due to regulatory beacon hints. For more information on beacon + * hints read the documenation for regulatory_hint_found_beacon() + * @WIPHY_FLAG_NETNS_OK: if not set, do not allow changing the netns of this + * wiphy at all + * @WIPHY_FLAG_PS_ON_BY_DEFAULT: if set to true, powersave will be enabled + * by default -- this flag will be set depending on the kernel's default + * on wiphy_new(), but can be changed by the driver if it has a good + * reason to override the default + * @WIPHY_FLAG_4ADDR_AP: supports 4addr mode even on AP (with a single station + * on a VLAN interface) + * @WIPHY_FLAG_4ADDR_STATION: supports 4addr mode even as a station + */ +enum wiphy_flags { + WIPHY_FLAG_CUSTOM_REGULATORY = BIT(0), + WIPHY_FLAG_STRICT_REGULATORY = BIT(1), + WIPHY_FLAG_DISABLE_BEACON_HINTS = BIT(2), + WIPHY_FLAG_NETNS_OK = BIT(3), + WIPHY_FLAG_PS_ON_BY_DEFAULT = BIT(4), + WIPHY_FLAG_4ADDR_AP = BIT(5), + WIPHY_FLAG_4ADDR_STATION = BIT(6), +}; + +struct mac_address { + u8 addr[ETH_ALEN]; +}; + +/** + * struct wiphy - wireless hardware description + * @idx: the wiphy index assigned to this item + * @class_dev: the class device representing /sys/class/ieee80211/ + * @reg_notifier: the driver's regulatory notification callback + * @regd: the driver's regulatory domain, if one was requested via + * the regulatory_hint() API. This can be used by the driver + * on the reg_notifier() if it chooses to ignore future + * regulatory domain changes caused by other drivers. + * @signal_type: signal type reported in &struct cfg80211_bss. + * @cipher_suites: supported cipher suites + * @n_cipher_suites: number of supported cipher suites + * @retry_short: Retry limit for short frames (dot11ShortRetryLimit) + * @retry_long: Retry limit for long frames (dot11LongRetryLimit) + * @frag_threshold: Fragmentation threshold (dot11FragmentationThreshold); + * -1 = fragmentation disabled, only odd values >= 256 used + * @rts_threshold: RTS threshold (dot11RTSThreshold); -1 = RTS/CTS disabled + * @net: the network namespace this wiphy currently lives in + * @perm_addr: permanent MAC address of this device + * @addr_mask: If the device supports multiple MAC addresses by masking, + * set this to a mask with variable bits set to 1, e.g. if the last + * four bits are variable then set it to 00:...:00:0f. The actual + * variable bits shall be determined by the interfaces added, with + * interfaces not matching the mask being rejected to be brought up. + * @n_addresses: number of addresses in @addresses. + * @addresses: If the device has more than one address, set this pointer + * to a list of addresses (6 bytes each). The first one will be used + * by default for perm_addr. In this case, the mask should be set to + * all-zeroes. In this case it is assumed that the device can handle + * the same number of arbitrary MAC addresses. + */ +struct wiphy { + /* assign these fields before you register the wiphy */ + + /* permanent MAC address(es) */ + u8 perm_addr[ETH_ALEN]; + u8 addr_mask[ETH_ALEN]; + + u16 n_addresses; + struct mac_address *addresses; + + /* Supported interface modes, OR together BIT(NL80211_IFTYPE_...) */ + u16 interface_modes; + + u32 flags; + + enum cfg80211_signal_type signal_type; + + int bss_priv_size; + u8 max_scan_ssids; + u16 max_scan_ie_len; + + int n_cipher_suites; + const u32 *cipher_suites; + + u8 retry_short; + u8 retry_long; + u32 frag_threshold; + u32 rts_threshold; + u8 coverage_class; + + char fw_version[ETHTOOL_BUSINFO_LEN]; + u32 hw_version; + + u8 max_num_pmkids; + + /* If multiple wiphys are registered and you're handed e.g. + * a regular netdev with assigned ieee80211_ptr, you won't + * know whether it points to a wiphy your driver has registered + * or not. Assign this to something global to your driver to + * help determine whether you own this wiphy or not. */ + const void *privid; + + struct ieee80211_supported_band *bands[IEEE80211_NUM_BANDS]; + + /* Lets us get back the wiphy on the callback */ + int (*reg_notifier)(struct wiphy *wiphy, + struct regulatory_request *request); + + /* fields below are read-only, assigned by cfg80211 */ + + const struct ieee80211_regdomain *regd; + + /* the item in /sys/class/ieee80211/ points to this, + * you need use set_wiphy_dev() (see below) */ + struct device dev; + + /* dir in debugfs: ieee80211/ */ + struct dentry *debugfsdir; + +#ifdef CONFIG_NET_NS + /* the network namespace this phy lives in currently */ + struct net *_net; +#endif + +#ifdef CONFIG_CFG80211_WEXT + const struct iw_handler_def *wext; +#endif + + char priv[0] __attribute__((__aligned__(NETDEV_ALIGN))); +}; + +#ifdef CONFIG_NET_NS +static inline struct net *wiphy_net(struct wiphy *wiphy) +{ + return wiphy->_net; +} + +static inline void wiphy_net_set(struct wiphy *wiphy, struct net *net) +{ + wiphy->_net = net; +} +#else +static inline struct net *wiphy_net(struct wiphy *wiphy) +{ + return &init_net; +} + +static inline void wiphy_net_set(struct wiphy *wiphy, struct net *net) +{ +} +#endif + +/** + * wiphy_priv - return priv from wiphy + * + * @wiphy: the wiphy whose priv pointer to return + */ +static inline void *wiphy_priv(struct wiphy *wiphy) +{ + BUG_ON(!wiphy); + return &wiphy->priv; +} + +/** + * priv_to_wiphy - return the wiphy containing the priv + * + * @priv: a pointer previously returned by wiphy_priv + */ +static inline struct wiphy *priv_to_wiphy(void *priv) +{ + BUG_ON(!priv); + return container_of(priv, struct wiphy, priv); +} + +/** + * set_wiphy_dev - set device pointer for wiphy + * + * @wiphy: The wiphy whose device to bind + * @dev: The device to parent it to + */ +static inline void set_wiphy_dev(struct wiphy *wiphy, struct device *dev) +{ + wiphy->dev.parent = dev; +} + +/** + * wiphy_dev - get wiphy dev pointer + * + * @wiphy: The wiphy whose device struct to look up + */ +static inline struct device *wiphy_dev(struct wiphy *wiphy) +{ + return wiphy->dev.parent; +} + +/** + * wiphy_name - get wiphy name + * + * @wiphy: The wiphy whose name to return + */ +static inline const char *wiphy_name(struct wiphy *wiphy) +{ + return dev_name(&wiphy->dev); +} + +/** + * wiphy_new - create a new wiphy for use with cfg80211 + * + * @ops: The configuration operations for this device + * @sizeof_priv: The size of the private area to allocate + * + * Create a new wiphy and associate the given operations with it. + * @sizeof_priv bytes are allocated for private use. + * + * The returned pointer must be assigned to each netdev's + * ieee80211_ptr for proper operation. + */ +struct wiphy *wiphy_new(const struct cfg80211_ops *ops, int sizeof_priv); + +/** + * wiphy_register - register a wiphy with cfg80211 + * + * @wiphy: The wiphy to register. + * + * Returns a non-negative wiphy index or a negative error code. + */ +extern int wiphy_register(struct wiphy *wiphy); + +/** + * wiphy_unregister - deregister a wiphy from cfg80211 + * + * @wiphy: The wiphy to unregister. + * + * After this call, no more requests can be made with this priv + * pointer, but the call may sleep to wait for an outstanding + * request that is being handled. + */ +extern void wiphy_unregister(struct wiphy *wiphy); + +/** + * wiphy_free - free wiphy + * + * @wiphy: The wiphy to free + */ +extern void wiphy_free(struct wiphy *wiphy); + +/* internal structs */ +struct cfg80211_conn; +struct cfg80211_internal_bss; +struct cfg80211_cached_keys; + +#define MAX_AUTH_BSSES 4 + +/** + * struct wireless_dev - wireless per-netdev state + * + * This structure must be allocated by the driver/stack + * that uses the ieee80211_ptr field in struct net_device + * (this is intentional so it can be allocated along with + * the netdev.) + * + * @wiphy: pointer to hardware description + * @iftype: interface type + * @list: (private) Used to collect the interfaces + * @netdev: (private) Used to reference back to the netdev + * @current_bss: (private) Used by the internal configuration code + * @bssid: (private) Used by the internal configuration code + * @ssid: (private) Used by the internal configuration code + * @ssid_len: (private) Used by the internal configuration code + * @wext: (private) Used by the internal wireless extensions compat code + * @wext_bssid: (private) Used by the internal wireless extensions compat code + * @use_4addr: indicates 4addr mode is used on this interface, must be + * set by driver (if supported) on add_interface BEFORE registering the + * netdev and may otherwise be used by driver read-only, will be update + * by cfg80211 on change_interface + */ +struct wireless_dev { + struct wiphy *wiphy; + enum nl80211_iftype iftype; + + /* the remainder of this struct should be private to cfg80211 */ + struct list_head list; + struct net_device *netdev; + + struct mutex mtx; + + struct work_struct cleanup_work; + + bool use_4addr; + + /* currently used for IBSS and SME - might be rearranged later */ + u8 ssid[IEEE80211_MAX_SSID_LEN]; + u8 ssid_len; + enum { + CFG80211_SME_IDLE, + CFG80211_SME_CONNECTING, + CFG80211_SME_CONNECTED, + } sme_state; + struct cfg80211_conn *conn; + struct cfg80211_cached_keys *connect_keys; + + struct list_head event_list; + spinlock_t event_lock; + + struct cfg80211_internal_bss *authtry_bsses[MAX_AUTH_BSSES]; + struct cfg80211_internal_bss *auth_bsses[MAX_AUTH_BSSES]; + struct cfg80211_internal_bss *current_bss; /* associated / joined */ + +#ifdef CONFIG_CFG80211_WEXT + /* wext data */ + struct { + struct cfg80211_ibss_params ibss; + struct cfg80211_connect_params connect; + struct cfg80211_cached_keys *keys; + u8 *ie; + size_t ie_len; + u8 bssid[ETH_ALEN], prev_bssid[ETH_ALEN]; + u8 ssid[IEEE80211_MAX_SSID_LEN]; + s8 default_key, default_mgmt_key; + bool ps, prev_bssid_valid; + int ps_timeout; + } wext; +#endif +}; + +/** + * wdev_priv - return wiphy priv from wireless_dev + * + * @wdev: The wireless device whose wiphy's priv pointer to return + */ +static inline void *wdev_priv(struct wireless_dev *wdev) +{ + BUG_ON(!wdev); + return wiphy_priv(wdev->wiphy); +} + +/* + * Utility functions + */ + +/** + * ieee80211_channel_to_frequency - convert channel number to frequency + */ +extern int ieee80211_channel_to_frequency(int chan); + +/** + * ieee80211_frequency_to_channel - convert frequency to channel number + */ +extern int ieee80211_frequency_to_channel(int freq); + +/* + * Name indirection necessary because the ieee80211 code also has + * a function named "ieee80211_get_channel", so if you include + * cfg80211's header file you get cfg80211's version, if you try + * to include both header files you'll (rightfully!) get a symbol + * clash. + */ +extern struct ieee80211_channel *__ieee80211_get_channel(struct wiphy *wiphy, + int freq); +/** + * ieee80211_get_channel - get channel struct from wiphy for specified frequency + */ +static inline struct ieee80211_channel * +ieee80211_get_channel(struct wiphy *wiphy, int freq) +{ + return __ieee80211_get_channel(wiphy, freq); +} + +/** + * ieee80211_get_response_rate - get basic rate for a given rate + * + * @sband: the band to look for rates in + * @basic_rates: bitmap of basic rates + * @bitrate: the bitrate for which to find the basic rate + * + * This function returns the basic rate corresponding to a given + * bitrate, that is the next lower bitrate contained in the basic + * rate map, which is, for this function, given as a bitmap of + * indices of rates in the band's bitrate table. + */ +struct ieee80211_rate * +ieee80211_get_response_rate(struct ieee80211_supported_band *sband, + u32 basic_rates, int bitrate); + +/* + * Radiotap parsing functions -- for controlled injection support + * + * Implemented in net/wireless/radiotap.c + * Documentation in Documentation/networking/radiotap-headers.txt + */ + +struct radiotap_align_size { + uint8_t align:4, size:4; +}; + +struct ieee80211_radiotap_namespace { + const struct radiotap_align_size *align_size; + int n_bits; + uint32_t oui; + uint8_t subns; +}; + +struct ieee80211_radiotap_vendor_namespaces { + const struct ieee80211_radiotap_namespace *ns; + int n_ns; +}; + +/** + * struct ieee80211_radiotap_iterator - tracks walk thru present radiotap args + * @this_arg_index: index of current arg, valid after each successful call + * to ieee80211_radiotap_iterator_next() + * @this_arg: pointer to current radiotap arg; it is valid after each + * call to ieee80211_radiotap_iterator_next() but also after + * ieee80211_radiotap_iterator_init() where it will point to + * the beginning of the actual data portion + * @this_arg_size: length of the current arg, for convenience + * @current_namespace: pointer to the current namespace definition + * (or internally %NULL if the current namespace is unknown) + * @is_radiotap_ns: indicates whether the current namespace is the default + * radiotap namespace or not + * + * @overrides: override standard radiotap fields + * @n_overrides: number of overrides + * + * @_rtheader: pointer to the radiotap header we are walking through + * @_max_length: length of radiotap header in cpu byte ordering + * @_arg_index: next argument index + * @_arg: next argument pointer + * @_next_bitmap: internal pointer to next present u32 + * @_bitmap_shifter: internal shifter for curr u32 bitmap, b0 set == arg present + * @_vns: vendor namespace definitions + * @_next_ns_data: beginning of the next namespace's data + * @_reset_on_ext: internal; reset the arg index to 0 when going to the + * next bitmap word + * + * Describes the radiotap parser state. Fields prefixed with an underscore + * must not be used by users of the parser, only by the parser internally. + */ + +struct ieee80211_radiotap_iterator { + struct ieee80211_radiotap_header *_rtheader; + const struct ieee80211_radiotap_vendor_namespaces *_vns; + const struct ieee80211_radiotap_namespace *current_namespace; + + unsigned char *_arg, *_next_ns_data; + uint32_t *_next_bitmap; + + unsigned char *this_arg; + int this_arg_index; + int this_arg_size; + + int is_radiotap_ns; + + int _max_length; + int _arg_index; + uint32_t _bitmap_shifter; + int _reset_on_ext; +}; + +extern int ieee80211_radiotap_iterator_init( + struct ieee80211_radiotap_iterator *iterator, + struct ieee80211_radiotap_header *radiotap_header, + int max_length, const struct ieee80211_radiotap_vendor_namespaces *vns); + +extern int ieee80211_radiotap_iterator_next( + struct ieee80211_radiotap_iterator *iterator); + + +extern const unsigned char rfc1042_header[6]; +extern const unsigned char bridge_tunnel_header[6]; + +/** + * ieee80211_get_hdrlen_from_skb - get header length from data + * + * Given an skb with a raw 802.11 header at the data pointer this function + * returns the 802.11 header length in bytes (not including encryption + * headers). If the data in the sk_buff is too short to contain a valid 802.11 + * header the function returns 0. + * + * @skb: the frame + */ +unsigned int ieee80211_get_hdrlen_from_skb(const struct sk_buff *skb); + +/** + * ieee80211_hdrlen - get header length in bytes from frame control + * @fc: frame control field in little-endian format + */ +unsigned int ieee80211_hdrlen(__le16 fc); + +/** + * ieee80211_data_to_8023 - convert an 802.11 data frame to 802.3 + * @skb: the 802.11 data frame + * @addr: the device MAC address + * @iftype: the virtual interface type + */ +int ieee80211_data_to_8023(struct sk_buff *skb, const u8 *addr, + enum nl80211_iftype iftype); + +/** + * ieee80211_data_from_8023 - convert an 802.3 frame to 802.11 + * @skb: the 802.3 frame + * @addr: the device MAC address + * @iftype: the virtual interface type + * @bssid: the network bssid (used only for iftype STATION and ADHOC) + * @qos: build 802.11 QoS data frame + */ +int ieee80211_data_from_8023(struct sk_buff *skb, const u8 *addr, + enum nl80211_iftype iftype, u8 *bssid, bool qos); + +/** + * ieee80211_amsdu_to_8023s - decode an IEEE 802.11n A-MSDU frame + * + * Decode an IEEE 802.11n A-MSDU frame and convert it to a list of + * 802.3 frames. The @list will be empty if the decode fails. The + * @skb is consumed after the function returns. + * + * @skb: The input IEEE 802.11n A-MSDU frame. + * @list: The output list of 802.3 frames. It must be allocated and + * initialized by by the caller. + * @addr: The device MAC address. + * @iftype: The device interface type. + * @extra_headroom: The hardware extra headroom for SKBs in the @list. + */ +void ieee80211_amsdu_to_8023s(struct sk_buff *skb, struct sk_buff_head *list, + const u8 *addr, enum nl80211_iftype iftype, + const unsigned int extra_headroom); + +/** + * cfg80211_classify8021d - determine the 802.1p/1d tag for a data frame + * @skb: the data frame + */ +unsigned int cfg80211_classify8021d(struct sk_buff *skb); + +/** + * cfg80211_find_ie - find information element in data + * + * @eid: element ID + * @ies: data consisting of IEs + * @len: length of data + * + * This function will return %NULL if the element ID could + * not be found or if the element is invalid (claims to be + * longer than the given data), or a pointer to the first byte + * of the requested element, that is the byte containing the + * element ID. There are no checks on the element length + * other than having to fit into the given data. + */ +const u8 *cfg80211_find_ie(u8 eid, const u8 *ies, int len); + +/* + * Regulatory helper functions for wiphys + */ + +/** + * regulatory_hint - driver hint to the wireless core a regulatory domain + * @wiphy: the wireless device giving the hint (used only for reporting + * conflicts) + * @alpha2: the ISO/IEC 3166 alpha2 the driver claims its regulatory domain + * should be in. If @rd is set this should be NULL. Note that if you + * set this to NULL you should still set rd->alpha2 to some accepted + * alpha2. + * + * Wireless drivers can use this function to hint to the wireless core + * what it believes should be the current regulatory domain by + * giving it an ISO/IEC 3166 alpha2 country code it knows its regulatory + * domain should be in or by providing a completely build regulatory domain. + * If the driver provides an ISO/IEC 3166 alpha2 userspace will be queried + * for a regulatory domain structure for the respective country. + * + * The wiphy must have been registered to cfg80211 prior to this call. + * For cfg80211 drivers this means you must first use wiphy_register(), + * for mac80211 drivers you must first use ieee80211_register_hw(). + * + * Drivers should check the return value, its possible you can get + * an -ENOMEM. + */ +extern int regulatory_hint(struct wiphy *wiphy, const char *alpha2); + +/** + * wiphy_apply_custom_regulatory - apply a custom driver regulatory domain + * @wiphy: the wireless device we want to process the regulatory domain on + * @regd: the custom regulatory domain to use for this wiphy + * + * Drivers can sometimes have custom regulatory domains which do not apply + * to a specific country. Drivers can use this to apply such custom regulatory + * domains. This routine must be called prior to wiphy registration. The + * custom regulatory domain will be trusted completely and as such previous + * default channel settings will be disregarded. If no rule is found for a + * channel on the regulatory domain the channel will be disabled. + */ +extern void wiphy_apply_custom_regulatory( + struct wiphy *wiphy, + const struct ieee80211_regdomain *regd); + +/** + * freq_reg_info - get regulatory information for the given frequency + * @wiphy: the wiphy for which we want to process this rule for + * @center_freq: Frequency in KHz for which we want regulatory information for + * @desired_bw_khz: the desired max bandwidth you want to use per + * channel. Note that this is still 20 MHz if you want to use HT40 + * as HT40 makes use of two channels for its 40 MHz width bandwidth. + * If set to 0 we'll assume you want the standard 20 MHz. + * @reg_rule: the regulatory rule which we have for this frequency + * + * Use this function to get the regulatory rule for a specific frequency on + * a given wireless device. If the device has a specific regulatory domain + * it wants to follow we respect that unless a country IE has been received + * and processed already. + * + * Returns 0 if it was able to find a valid regulatory rule which does + * apply to the given center_freq otherwise it returns non-zero. It will + * also return -ERANGE if we determine the given center_freq does not even have + * a regulatory rule for a frequency range in the center_freq's band. See + * freq_in_rule_band() for our current definition of a band -- this is purely + * subjective and right now its 802.11 specific. + */ +extern int freq_reg_info(struct wiphy *wiphy, + u32 center_freq, + u32 desired_bw_khz, + const struct ieee80211_reg_rule **reg_rule); + +/* + * Temporary wext handlers & helper functions + * + * In the future cfg80211 will simply assign the entire wext handler + * structure to netdevs it manages, but we're not there yet. + */ +int cfg80211_wext_giwname(struct net_device *dev, + struct iw_request_info *info, + char *name, char *extra); +int cfg80211_wext_siwmode(struct net_device *dev, struct iw_request_info *info, + u32 *mode, char *extra); +int cfg80211_wext_giwmode(struct net_device *dev, struct iw_request_info *info, + u32 *mode, char *extra); +int cfg80211_wext_siwscan(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra); +int cfg80211_wext_giwscan(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *data, char *extra); +int cfg80211_wext_siwmlme(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *data, char *extra); +int cfg80211_wext_giwrange(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *data, char *extra); +int cfg80211_wext_siwgenie(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *data, char *extra); +int cfg80211_wext_siwauth(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *data, char *extra); +int cfg80211_wext_giwauth(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *data, char *extra); + +int cfg80211_wext_siwfreq(struct net_device *dev, + struct iw_request_info *info, + struct iw_freq *freq, char *extra); +int cfg80211_wext_giwfreq(struct net_device *dev, + struct iw_request_info *info, + struct iw_freq *freq, char *extra); +int cfg80211_wext_siwessid(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *data, char *ssid); +int cfg80211_wext_giwessid(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *data, char *ssid); +int cfg80211_wext_siwrate(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *rate, char *extra); +int cfg80211_wext_giwrate(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *rate, char *extra); + +int cfg80211_wext_siwrts(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *rts, char *extra); +int cfg80211_wext_giwrts(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *rts, char *extra); +int cfg80211_wext_siwfrag(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *frag, char *extra); +int cfg80211_wext_giwfrag(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *frag, char *extra); +int cfg80211_wext_siwretry(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *retry, char *extra); +int cfg80211_wext_giwretry(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *retry, char *extra); +int cfg80211_wext_siwencodeext(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *erq, char *extra); +int cfg80211_wext_siwencode(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *erq, char *keybuf); +int cfg80211_wext_giwencode(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *erq, char *keybuf); +int cfg80211_wext_siwtxpower(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *data, char *keybuf); +int cfg80211_wext_giwtxpower(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *data, char *keybuf); +struct iw_statistics *cfg80211_wireless_stats(struct net_device *dev); + +int cfg80211_wext_siwpower(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *wrq, char *extra); +int cfg80211_wext_giwpower(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *wrq, char *extra); + +int cfg80211_wext_siwap(struct net_device *dev, + struct iw_request_info *info, + struct sockaddr *ap_addr, char *extra); +int cfg80211_wext_giwap(struct net_device *dev, + struct iw_request_info *info, + struct sockaddr *ap_addr, char *extra); + +/* + * callbacks for asynchronous cfg80211 methods, notification + * functions and BSS handling helpers + */ + +/** + * cfg80211_scan_done - notify that scan finished + * + * @request: the corresponding scan request + * @aborted: set to true if the scan was aborted for any reason, + * userspace will be notified of that + */ +void cfg80211_scan_done(struct cfg80211_scan_request *request, bool aborted); + +/** + * cfg80211_inform_bss - inform cfg80211 of a new BSS + * + * @wiphy: the wiphy reporting the BSS + * @bss: the found BSS + * @signal: the signal strength, type depends on the wiphy's signal_type + * @gfp: context flags + * + * This informs cfg80211 that BSS information was found and + * the BSS should be updated/added. + */ +struct cfg80211_bss* +cfg80211_inform_bss_frame(struct wiphy *wiphy, + struct ieee80211_channel *channel, + struct ieee80211_mgmt *mgmt, size_t len, + s32 signal, gfp_t gfp); + +struct cfg80211_bss* +cfg80211_inform_bss(struct wiphy *wiphy, + struct ieee80211_channel *channel, + const u8 *bssid, + u64 timestamp, u16 capability, u16 beacon_interval, + const u8 *ie, size_t ielen, + s32 signal, gfp_t gfp); + +struct cfg80211_bss *cfg80211_get_bss(struct wiphy *wiphy, + struct ieee80211_channel *channel, + const u8 *bssid, + const u8 *ssid, size_t ssid_len, + u16 capa_mask, u16 capa_val); +static inline struct cfg80211_bss * +cfg80211_get_ibss(struct wiphy *wiphy, + struct ieee80211_channel *channel, + const u8 *ssid, size_t ssid_len) +{ + return cfg80211_get_bss(wiphy, channel, NULL, ssid, ssid_len, + WLAN_CAPABILITY_IBSS, WLAN_CAPABILITY_IBSS); +} + +struct cfg80211_bss *cfg80211_get_mesh(struct wiphy *wiphy, + struct ieee80211_channel *channel, + const u8 *meshid, size_t meshidlen, + const u8 *meshcfg); +void cfg80211_put_bss(struct cfg80211_bss *bss); + +/** + * cfg80211_unlink_bss - unlink BSS from internal data structures + * @wiphy: the wiphy + * @bss: the bss to remove + * + * This function removes the given BSS from the internal data structures + * thereby making it no longer show up in scan results etc. Use this + * function when you detect a BSS is gone. Normally BSSes will also time + * out, so it is not necessary to use this function at all. + */ +void cfg80211_unlink_bss(struct wiphy *wiphy, struct cfg80211_bss *bss); + +/** + * cfg80211_send_rx_auth - notification of processed authentication + * @dev: network device + * @buf: authentication frame (header + body) + * @len: length of the frame data + * + * This function is called whenever an authentication has been processed in + * station mode. The driver is required to call either this function or + * cfg80211_send_auth_timeout() to indicate the result of cfg80211_ops::auth() + * call. This function may sleep. + */ +void cfg80211_send_rx_auth(struct net_device *dev, const u8 *buf, size_t len); + +/** + * cfg80211_send_auth_timeout - notification of timed out authentication + * @dev: network device + * @addr: The MAC address of the device with which the authentication timed out + * + * This function may sleep. + */ +void cfg80211_send_auth_timeout(struct net_device *dev, const u8 *addr); + +/** + * __cfg80211_auth_canceled - notify cfg80211 that authentication was canceled + * @dev: network device + * @addr: The MAC address of the device with which the authentication timed out + * + * When a pending authentication had no action yet, the driver may decide + * to not send a deauth frame, but in that case must calls this function + * to tell cfg80211 about this decision. It is only valid to call this + * function within the deauth() callback. + */ +void __cfg80211_auth_canceled(struct net_device *dev, const u8 *addr); + +/** + * cfg80211_send_rx_assoc - notification of processed association + * @dev: network device + * @buf: (re)association response frame (header + body) + * @len: length of the frame data + * + * This function is called whenever a (re)association response has been + * processed in station mode. The driver is required to call either this + * function or cfg80211_send_assoc_timeout() to indicate the result of + * cfg80211_ops::assoc() call. This function may sleep. + */ +void cfg80211_send_rx_assoc(struct net_device *dev, const u8 *buf, size_t len); + +/** + * cfg80211_send_assoc_timeout - notification of timed out association + * @dev: network device + * @addr: The MAC address of the device with which the association timed out + * + * This function may sleep. + */ +void cfg80211_send_assoc_timeout(struct net_device *dev, const u8 *addr); + +/** + * cfg80211_send_deauth - notification of processed deauthentication + * @dev: network device + * @buf: deauthentication frame (header + body) + * @len: length of the frame data + * + * This function is called whenever deauthentication has been processed in + * station mode. This includes both received deauthentication frames and + * locally generated ones. This function may sleep. + */ +void cfg80211_send_deauth(struct net_device *dev, const u8 *buf, size_t len); + +/** + * __cfg80211_send_deauth - notification of processed deauthentication + * @dev: network device + * @buf: deauthentication frame (header + body) + * @len: length of the frame data + * + * Like cfg80211_send_deauth(), but doesn't take the wdev lock. + */ +void __cfg80211_send_deauth(struct net_device *dev, const u8 *buf, size_t len); + +/** + * cfg80211_send_disassoc - notification of processed disassociation + * @dev: network device + * @buf: disassociation response frame (header + body) + * @len: length of the frame data + * + * This function is called whenever disassociation has been processed in + * station mode. This includes both received disassociation frames and locally + * generated ones. This function may sleep. + */ +void cfg80211_send_disassoc(struct net_device *dev, const u8 *buf, size_t len); + +/** + * __cfg80211_send_disassoc - notification of processed disassociation + * @dev: network device + * @buf: disassociation response frame (header + body) + * @len: length of the frame data + * + * Like cfg80211_send_disassoc(), but doesn't take the wdev lock. + */ +void __cfg80211_send_disassoc(struct net_device *dev, const u8 *buf, + size_t len); + +/** + * cfg80211_michael_mic_failure - notification of Michael MIC failure (TKIP) + * @dev: network device + * @addr: The source MAC address of the frame + * @key_type: The key type that the received frame used + * @key_id: Key identifier (0..3) + * @tsc: The TSC value of the frame that generated the MIC failure (6 octets) + * @gfp: allocation flags + * + * This function is called whenever the local MAC detects a MIC failure in a + * received frame. This matches with MLME-MICHAELMICFAILURE.indication() + * primitive. + */ +void cfg80211_michael_mic_failure(struct net_device *dev, const u8 *addr, + enum nl80211_key_type key_type, int key_id, + const u8 *tsc, gfp_t gfp); + +/** + * cfg80211_ibss_joined - notify cfg80211 that device joined an IBSS + * + * @dev: network device + * @bssid: the BSSID of the IBSS joined + * @gfp: allocation flags + * + * This function notifies cfg80211 that the device joined an IBSS or + * switched to a different BSSID. Before this function can be called, + * either a beacon has to have been received from the IBSS, or one of + * the cfg80211_inform_bss{,_frame} functions must have been called + * with the locally generated beacon -- this guarantees that there is + * always a scan result for this IBSS. cfg80211 will handle the rest. + */ +void cfg80211_ibss_joined(struct net_device *dev, const u8 *bssid, gfp_t gfp); + +/** + * wiphy_rfkill_set_hw_state - notify cfg80211 about hw block state + * @wiphy: the wiphy + * @blocked: block status + */ +void wiphy_rfkill_set_hw_state(struct wiphy *wiphy, bool blocked); + +/** + * wiphy_rfkill_start_polling - start polling rfkill + * @wiphy: the wiphy + */ +void wiphy_rfkill_start_polling(struct wiphy *wiphy); + +/** + * wiphy_rfkill_stop_polling - stop polling rfkill + * @wiphy: the wiphy + */ +void wiphy_rfkill_stop_polling(struct wiphy *wiphy); + +#ifdef CONFIG_NL80211_TESTMODE +/** + * cfg80211_testmode_alloc_reply_skb - allocate testmode reply + * @wiphy: the wiphy + * @approxlen: an upper bound of the length of the data that will + * be put into the skb + * + * This function allocates and pre-fills an skb for a reply to + * the testmode command. Since it is intended for a reply, calling + * it outside of the @testmode_cmd operation is invalid. + * + * The returned skb (or %NULL if any errors happen) is pre-filled + * with the wiphy index and set up in a way that any data that is + * put into the skb (with skb_put(), nla_put() or similar) will end + * up being within the %NL80211_ATTR_TESTDATA attribute, so all that + * needs to be done with the skb is adding data for the corresponding + * userspace tool which can then read that data out of the testdata + * attribute. You must not modify the skb in any other way. + * + * When done, call cfg80211_testmode_reply() with the skb and return + * its error code as the result of the @testmode_cmd operation. + */ +struct sk_buff *cfg80211_testmode_alloc_reply_skb(struct wiphy *wiphy, + int approxlen); + +/** + * cfg80211_testmode_reply - send the reply skb + * @skb: The skb, must have been allocated with + * cfg80211_testmode_alloc_reply_skb() + * + * Returns an error code or 0 on success, since calling this + * function will usually be the last thing before returning + * from the @testmode_cmd you should return the error code. + * Note that this function consumes the skb regardless of the + * return value. + */ +int cfg80211_testmode_reply(struct sk_buff *skb); + +/** + * cfg80211_testmode_alloc_event_skb - allocate testmode event + * @wiphy: the wiphy + * @approxlen: an upper bound of the length of the data that will + * be put into the skb + * @gfp: allocation flags + * + * This function allocates and pre-fills an skb for an event on the + * testmode multicast group. + * + * The returned skb (or %NULL if any errors happen) is set up in the + * same way as with cfg80211_testmode_alloc_reply_skb() but prepared + * for an event. As there, you should simply add data to it that will + * then end up in the %NL80211_ATTR_TESTDATA attribute. Again, you must + * not modify the skb in any other way. + * + * When done filling the skb, call cfg80211_testmode_event() with the + * skb to send the event. + */ +struct sk_buff *cfg80211_testmode_alloc_event_skb(struct wiphy *wiphy, + int approxlen, gfp_t gfp); + +/** + * cfg80211_testmode_event - send the event + * @skb: The skb, must have been allocated with + * cfg80211_testmode_alloc_event_skb() + * @gfp: allocation flags + * + * This function sends the given @skb, which must have been allocated + * by cfg80211_testmode_alloc_event_skb(), as an event. It always + * consumes it. + */ +void cfg80211_testmode_event(struct sk_buff *skb, gfp_t gfp); + +#define CFG80211_TESTMODE_CMD(cmd) .testmode_cmd = (cmd), +#else +#define CFG80211_TESTMODE_CMD(cmd) +#endif + +/** + * cfg80211_connect_result - notify cfg80211 of connection result + * + * @dev: network device + * @bssid: the BSSID of the AP + * @req_ie: association request IEs (maybe be %NULL) + * @req_ie_len: association request IEs length + * @resp_ie: association response IEs (may be %NULL) + * @resp_ie_len: assoc response IEs length + * @status: status code, 0 for successful connection, use + * %WLAN_STATUS_UNSPECIFIED_FAILURE if your device cannot give you + * the real status code for failures. + * @gfp: allocation flags + * + * It should be called by the underlying driver whenever connect() has + * succeeded. + */ +void cfg80211_connect_result(struct net_device *dev, const u8 *bssid, + const u8 *req_ie, size_t req_ie_len, + const u8 *resp_ie, size_t resp_ie_len, + u16 status, gfp_t gfp); + +/** + * cfg80211_roamed - notify cfg80211 of roaming + * + * @dev: network device + * @bssid: the BSSID of the new AP + * @req_ie: association request IEs (maybe be %NULL) + * @req_ie_len: association request IEs length + * @resp_ie: association response IEs (may be %NULL) + * @resp_ie_len: assoc response IEs length + * @gfp: allocation flags + * + * It should be called by the underlying driver whenever it roamed + * from one AP to another while connected. + */ +void cfg80211_roamed(struct net_device *dev, const u8 *bssid, + const u8 *req_ie, size_t req_ie_len, + const u8 *resp_ie, size_t resp_ie_len, gfp_t gfp); + +/** + * cfg80211_disconnected - notify cfg80211 that connection was dropped + * + * @dev: network device + * @ie: information elements of the deauth/disassoc frame (may be %NULL) + * @ie_len: length of IEs + * @reason: reason code for the disconnection, set it to 0 if unknown + * @gfp: allocation flags + * + * After it calls this function, the driver should enter an idle state + * and not try to connect to any AP any more. + */ +void cfg80211_disconnected(struct net_device *dev, u16 reason, + u8 *ie, size_t ie_len, gfp_t gfp); + +/** + * cfg80211_ready_on_channel - notification of remain_on_channel start + * @dev: network device + * @cookie: the request cookie + * @chan: The current channel (from remain_on_channel request) + * @channel_type: Channel type + * @duration: Duration in milliseconds that the driver intents to remain on the + * channel + * @gfp: allocation flags + */ +void cfg80211_ready_on_channel(struct net_device *dev, u64 cookie, + struct ieee80211_channel *chan, + enum nl80211_channel_type channel_type, + unsigned int duration, gfp_t gfp); + +/** + * cfg80211_remain_on_channel_expired - remain_on_channel duration expired + * @dev: network device + * @cookie: the request cookie + * @chan: The current channel (from remain_on_channel request) + * @channel_type: Channel type + * @gfp: allocation flags + */ +void cfg80211_remain_on_channel_expired(struct net_device *dev, + u64 cookie, + struct ieee80211_channel *chan, + enum nl80211_channel_type channel_type, + gfp_t gfp); + + +/** + * cfg80211_new_sta - notify userspace about station + * + * @dev: the netdev + * @mac_addr: the station's address + * @sinfo: the station information + * @gfp: allocation flags + */ +void cfg80211_new_sta(struct net_device *dev, const u8 *mac_addr, + struct station_info *sinfo, gfp_t gfp); #endif /* __NET_CFG80211_H */