X-Git-Url: http://ftp.safe.ca/?a=blobdiff_plain;f=include%2Fmedia%2Ftuner-types.h;h=ab03c5344209937818de9200a9f33b678e64c2c5;hb=e071041be037eca208b62b84469a06bdfc692bea;hp=9f0e9c1cb6fff642ede2a738add059c7484f9eb8;hpb=01872c5d253298b9f360c7c9b9f33504b6ad5469;p=safe%2Fjmp%2Flinux-2.6

diff --git a/include/media/tuner-types.h b/include/media/tuner-types.h
index 9f0e9c1..ab03c53 100644
--- a/include/media/tuner-types.h
+++ b/include/media/tuner-types.h
@@ -6,20 +6,22 @@
 #define __TUNER_TYPES_H__
 
 enum param_type {
-	TUNER_PARAM_TYPE_RADIO, \
-	TUNER_PARAM_TYPE_PAL, \
-	TUNER_PARAM_TYPE_SECAM, \
-	TUNER_PARAM_TYPE_NTSC
+	TUNER_PARAM_TYPE_RADIO,
+	TUNER_PARAM_TYPE_PAL,
+	TUNER_PARAM_TYPE_SECAM,
+	TUNER_PARAM_TYPE_NTSC,
+	TUNER_PARAM_TYPE_DIGITAL,
 };
 
 struct tuner_range {
 	unsigned short limit;
+	unsigned char config;
 	unsigned char cb;
 };
 
 struct tuner_params {
 	enum param_type type;
-	unsigned int tda988x;
+
 	/* Many Philips based tuners have a comment like this in their
 	 * datasheet:
 	 *
@@ -31,7 +33,7 @@ struct tuner_params {
 	 *   will result in very low tuning voltage which may drive the
 	 *   oscillator to extreme conditions.
 	 *
-	 * Set cb_first_if_lower_freq to 1, if this check is 
+	 * Set cb_first_if_lower_freq to 1, if this check is
 	 * required for this tuner.
 	 *
 	 * I tested this for PAL by first setting the TV frequency to
@@ -39,7 +41,72 @@ struct tuner_params {
 	 * static unless the control byte was sent first.
 	 */
 	unsigned int cb_first_if_lower_freq:1;
-	unsigned char config; /* to be moved into struct tuner_range for dvb-pll merge */
+	/* Set to 1 if this tuner uses a tda9887 */
+	unsigned int has_tda9887:1;
+	/* Many Philips tuners use tda9887 PORT1 to select the FM radio
+	   sensitivity. If this setting is 1, then set PORT1 to 1 to
+	   get proper FM reception. */
+	unsigned int port1_fm_high_sensitivity:1;
+	/* Some Philips tuners use tda9887 PORT2 to select the FM radio
+	   sensitivity. If this setting is 1, then set PORT2 to 1 to
+	   get proper FM reception. */
+	unsigned int port2_fm_high_sensitivity:1;
+	/* Some Philips tuners use tda9887 cGainNormal to select the FM radio
+	   sensitivity. If this setting is 1, e register will use cGainNormal
+	   instead of cGainLow. */
+	unsigned int fm_gain_normal:1;
+	/* Most tuners with a tda9887 use QSS mode. Some (cheaper) tuners
+	   use Intercarrier mode. If this setting is 1, then the tuner
+	   needs to be set to intercarrier mode. */
+	unsigned int intercarrier_mode:1;
+	/* This setting sets the default value for PORT1.
+	   0 means inactive, 1 means active. Note: the actual bit
+	   value written to the tda9887 is inverted. So a 0 here
+	   means a 1 in the B6 bit. */
+	unsigned int port1_active:1;
+	/* This setting sets the default value for PORT2.
+	   0 means inactive, 1 means active. Note: the actual bit
+	   value written to the tda9887 is inverted. So a 0 here
+	   means a 1 in the B7 bit. */
+	unsigned int port2_active:1;
+	/* Sometimes PORT1 is inverted when the SECAM-L' standard is selected.
+	   Set this bit to 1 if this is needed. */
+	unsigned int port1_invert_for_secam_lc:1;
+	/* Sometimes PORT2 is inverted when the SECAM-L' standard is selected.
+	   Set this bit to 1 if this is needed. */
+	unsigned int port2_invert_for_secam_lc:1;
+	/* Some cards require PORT1 to be 1 for mono Radio FM and 0 for stereo. */
+	unsigned int port1_set_for_fm_mono:1;
+	/* Select 18% (or according to datasheet 0%) L standard PLL gating,
+	   vs the driver default of 36%. */
+	unsigned int default_pll_gating_18:1;
+	/* IF to use in radio mode.  Tuners with a separate radio IF filter
+	   seem to use 10.7, while those without use 33.3 for PAL/SECAM tuners
+	   and 41.3 for NTSC tuners. 0 = 10.7, 1 = 33.3, 2 = 41.3 */
+	unsigned int radio_if:2;
+	/* Default tda9887 TOP value in dB for the low band. Default is 0.
+	   Range: -16:+15 */
+	signed int default_top_low:5;
+	/* Default tda9887 TOP value in dB for the mid band. Default is 0.
+	   Range: -16:+15 */
+	signed int default_top_mid:5;
+	/* Default tda9887 TOP value in dB for the high band. Default is 0.
+	   Range: -16:+15 */
+	signed int default_top_high:5;
+	/* Default tda9887 TOP value in dB for SECAM-L/L' for the low band.
+	   Default is 0. Several tuners require a different TOP value for
+	   the SECAM-L/L' standards. Range: -16:+15 */
+	signed int default_top_secam_low:5;
+	/* Default tda9887 TOP value in dB for SECAM-L/L' for the mid band.
+	   Default is 0. Several tuners require a different TOP value for
+	   the SECAM-L/L' standards. Range: -16:+15 */
+	signed int default_top_secam_mid:5;
+	/* Default tda9887 TOP value in dB for SECAM-L/L' for the high band.
+	   Default is 0. Several tuners require a different TOP value for
+	   the SECAM-L/L' standards. Range: -16:+15 */
+	signed int default_top_secam_high:5;
+
+	u16 iffreq;
 
 	unsigned int count;
 	struct tuner_range *ranges;
@@ -47,7 +114,15 @@ struct tuner_params {
 
 struct tunertype {
 	char *name;
+	unsigned int count;
 	struct tuner_params *params;
+
+	u16 min;
+	u16 max;
+	u32 stepsize;
+
+	u8 *initdata;
+	u8 *sleepdata;
 };
 
 extern struct tunertype tuners[];