X-Git-Url: http://ftp.safe.ca/?a=blobdiff_plain;f=include%2Flinux%2Fsm501-regs.h;h=d53642d2d8992d33e234d4f24f7dbe366d86cab7;hb=ba87a9beae8b39894f55761f4aff5ae2ca624f81;hp=cc9be4a1186104a93ab9e6518f8396c97544f19e;hpb=b6d6454fdb66f3829af8b92ab06825b6060fdf7e;p=safe%2Fjmp%2Flinux-2.6

diff --git a/include/linux/sm501-regs.h b/include/linux/sm501-regs.h
index cc9be4a..d53642d 100644
--- a/include/linux/sm501-regs.h
+++ b/include/linux/sm501-regs.h
@@ -15,6 +15,24 @@
 
 /* config 1 */
 #define SM501_SYSTEM_CONTROL 		(0x000000)
+
+#define SM501_SYSCTRL_PANEL_TRISTATE	(1<<0)
+#define SM501_SYSCTRL_MEM_TRISTATE	(1<<1)
+#define SM501_SYSCTRL_CRT_TRISTATE	(1<<2)
+
+#define SM501_SYSCTRL_PCI_SLAVE_BURST_MASK (3<<4)
+#define SM501_SYSCTRL_PCI_SLAVE_BURST_1	(0<<4)
+#define SM501_SYSCTRL_PCI_SLAVE_BURST_2	(1<<4)
+#define SM501_SYSCTRL_PCI_SLAVE_BURST_4	(2<<4)
+#define SM501_SYSCTRL_PCI_SLAVE_BURST_8	(3<<4)
+
+#define SM501_SYSCTRL_PCI_CLOCK_RUN_EN	(1<<6)
+#define SM501_SYSCTRL_PCI_RETRY_DISABLE	(1<<7)
+#define SM501_SYSCTRL_PCI_SUBSYS_LOCK	(1<<11)
+#define SM501_SYSCTRL_PCI_BURST_READ_EN	(1<<15)
+
+/* miscellaneous control */
+
 #define SM501_MISC_CONTROL		(0x000004)
 
 #define SM501_MISC_BUS_SH		(0x0)
@@ -64,6 +82,11 @@
 #define SM501_DEBUG_CONTROL		(0x000034)
 
 /* power management */
+#define SM501_POWERMODE_P2X_SRC		(1<<29)
+#define SM501_POWERMODE_V2X_SRC		(1<<20)
+#define SM501_POWERMODE_M_SRC		(1<<12)
+#define SM501_POWERMODE_M1_SRC		(1<<4)
+
 #define SM501_CURRENT_GATE		(0x000038)
 #define SM501_CURRENT_CLOCK		(0x00003C)
 #define SM501_POWER_MODE_0_GATE		(0x000040)
@@ -104,10 +127,16 @@
 #define SM501_DEVICEID			(0x000060)
 /* 0x050100A0 */
 
+#define SM501_DEVICEID_SM501		(0x05010000)
+#define SM501_DEVICEID_IDMASK		(0xffff0000)
+#define SM501_DEVICEID_REVMASK		(0x000000ff)
+
 #define SM501_PLLCLOCK_COUNT		(0x000064)
 #define SM501_MISC_TIMING		(0x000068)
 #define SM501_CURRENT_SDRAM_CLOCK	(0x00006C)
 
+#define SM501_PROGRAMMABLE_PLL_CONTROL	(0x000074)
+
 /* GPIO base */
 #define SM501_GPIO			(0x010000)
 #define SM501_GPIO_DATA_LOW		(0x00)
@@ -145,7 +174,7 @@
 /* USB slave/gadget data port base */
 #define SM501_USB_GADGET_DATA		(0x070000)
 
-/* Display contoller/video engine base */
+/* Display controller/video engine base */
 #define SM501_DC			(0x080000)
 
 /* common defines for the SM501 address registers */