X-Git-Url: http://ftp.safe.ca/?a=blobdiff_plain;f=include%2Flinux%2Fserial_core.h;h=db532ce288beec2f2a57bb9eb03912ede8f8afc9;hb=9a1607071c293e48b08bd703733480b1d55c7b93;hp=60061f44f3d8aeda8efd617a6e00c807f7542a6b;hpb=7d6a07d123b62bf4fa71867420c23da3ca36c995;p=safe%2Fjmp%2Flinux-2.6 diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index 60061f4..db532ce 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -20,6 +20,8 @@ #ifndef LINUX_SERIAL_CORE_H #define LINUX_SERIAL_CORE_H +#include + /* * The type definitions. These are from Ted Ts'o's serial.h */ @@ -40,7 +42,9 @@ #define PORT_NS16550A 14 #define PORT_XSCALE 15 #define PORT_RM9000 16 /* PMC-Sierra RM9xxx internal UART */ -#define PORT_MAX_8250 16 /* max port ID */ +#define PORT_OCTEON 17 /* Cavium OCTEON internal UART */ +#define PORT_AR7 18 /* Texas Instruments AR7 internal UART */ +#define PORT_MAX_8250 18 /* max port ID */ /* * ARM specific type numbers. These are not currently guaranteed @@ -160,6 +164,21 @@ #define PORT_S3C6400 84 +/* NWPSERIAL */ +#define PORT_NWPSERIAL 85 + +/* MAX3100 */ +#define PORT_MAX3100 86 + +/* Timberdale UART */ +#define PORT_TIMBUART 87 + +/* Qualcomm MSM SoCs */ +#define PORT_MSM 88 + +/* BCM63xx family SoCs */ +#define PORT_BCM63XX 89 + #ifdef __KERNEL__ #include @@ -172,7 +191,6 @@ #include struct uart_port; -struct uart_info; struct serial_struct; struct device; @@ -251,6 +269,7 @@ struct uart_port { unsigned int (*serial_in)(struct uart_port *, int); void (*serial_out)(struct uart_port *, int, int); unsigned int irq; /* irq number */ + unsigned long irqflags; /* irq flags */ unsigned int uartclk; /* base uart clock */ unsigned int fifosize; /* tx fifo size */ unsigned char x_char; /* xon/xoff char */ @@ -269,11 +288,11 @@ struct uart_port { unsigned int read_status_mask; /* driver specific */ unsigned int ignore_status_mask; /* driver specific */ - struct uart_info *info; /* pointer to parent info */ + struct uart_state *state; /* pointer to parent state */ struct uart_icount icount; /* statistics */ struct console *cons; /* struct console, if any */ -#ifdef CONFIG_SERIAL_CORE_CONSOLE +#if defined(CONFIG_SERIAL_CORE_CONSOLE) || defined(SUPPORT_SYSRQ) unsigned long sysrq; /* sysrq timeout */ #endif @@ -292,9 +311,12 @@ struct uart_port { #define UPF_HARDPPS_CD ((__force upf_t) (1 << 11)) #define UPF_LOW_LATENCY ((__force upf_t) (1 << 13)) #define UPF_BUGGY_UART ((__force upf_t) (1 << 14)) +#define UPF_NO_TXEN_TEST ((__force upf_t) (1 << 15)) #define UPF_MAGIC_MULTIPLIER ((__force upf_t) (1 << 16)) #define UPF_CONS_FLOW ((__force upf_t) (1 << 23)) #define UPF_SHARE_IRQ ((__force upf_t) (1 << 24)) +/* The exact UART type is known and should not be probed. */ +#define UPF_FIXED_TYPE ((__force upf_t) (1 << 27)) #define UPF_BOOT_AUTOCONF ((__force upf_t) (1 << 28)) #define UPF_FIXED_PORT ((__force upf_t) (1 << 29)) #define UPF_DEAD ((__force upf_t) (1 << 30)) @@ -318,52 +340,16 @@ struct uart_port { }; /* - * This is the state information which is only valid when the port - * is open; it may be cleared the core driver once the device has - * been closed. Either the low level driver or the core can modify - * stuff here. - */ -typedef unsigned int __bitwise__ uif_t; - -struct uart_info { - struct tty_port port; - struct circ_buf xmit; - uif_t flags; - -/* - * Definitions for info->flags. These are _private_ to serial_core, and - * are specific to this structure. They may be queried by low level drivers. - * - * FIXME: use the ASY_ definitions - */ -#define UIF_CHECK_CD ((__force uif_t) (1 << 25)) -#define UIF_CTS_FLOW ((__force uif_t) (1 << 26)) -#define UIF_NORMAL_ACTIVE ((__force uif_t) (1 << 29)) -#define UIF_INITIALIZED ((__force uif_t) (1 << 31)) -#define UIF_SUSPENDED ((__force uif_t) (1 << 30)) - - struct tasklet_struct tlet; - wait_queue_head_t delta_msr_wait; -}; - -/* * This is the state information which is persistent across opens. - * The low level driver must not to touch any elements contained - * within. */ struct uart_state { - unsigned int close_delay; /* msec */ - unsigned int closing_wait; /* msec */ - -#define USF_CLOSING_WAIT_INF (0) -#define USF_CLOSING_WAIT_NONE (~0U) + struct tty_port port; - int count; int pm_state; - struct uart_info info; - struct uart_port *port; + struct circ_buf xmit; - struct mutex mutex; + struct tasklet_struct tlet; + struct uart_port *uart_port; }; #define UART_XMIT_SIZE PAGE_SIZE @@ -444,7 +430,7 @@ int uart_resume_port(struct uart_driver *reg, struct uart_port *port); static inline int uart_tx_stopped(struct uart_port *port) { - struct tty_struct *tty = port->info->port.tty; + struct tty_struct *tty = port->state->port.tty; if(tty->stopped || tty->hw_stopped) return 1; return 0; @@ -459,7 +445,7 @@ uart_handle_sysrq_char(struct uart_port *port, unsigned int ch) #ifdef SUPPORT_SYSRQ if (port->sysrq) { if (ch && time_before(jiffies, port->sysrq)) { - handle_sysrq(ch, port->info->port.tty); + handle_sysrq(ch, port->state->port.tty); port->sysrq = 0; return 1; } @@ -477,7 +463,7 @@ uart_handle_sysrq_char(struct uart_port *port, unsigned int ch) */ static inline int uart_handle_break(struct uart_port *port) { - struct uart_info *info = port->info; + struct uart_state *state = port->state; #ifdef SUPPORT_SYSRQ if (port->cons && port->cons->index == port->line) { if (!port->sysrq) { @@ -488,59 +474,60 @@ static inline int uart_handle_break(struct uart_port *port) } #endif if (port->flags & UPF_SAK) - do_SAK(info->port.tty); + do_SAK(state->port.tty); return 0; } /** * uart_handle_dcd_change - handle a change of carrier detect state - * @port: uart_port structure for the open port + * @uport: uart_port structure for the open port * @status: new carrier detect status, nonzero if active */ static inline void -uart_handle_dcd_change(struct uart_port *port, unsigned int status) +uart_handle_dcd_change(struct uart_port *uport, unsigned int status) { - struct uart_info *info = port->info; + struct uart_state *state = uport->state; + struct tty_port *port = &state->port; - port->icount.dcd++; + uport->icount.dcd++; #ifdef CONFIG_HARD_PPS - if ((port->flags & UPF_HARDPPS_CD) && status) + if ((uport->flags & UPF_HARDPPS_CD) && status) hardpps(); #endif - if (info->flags & UIF_CHECK_CD) { + if (port->flags & ASYNC_CHECK_CD) { if (status) - wake_up_interruptible(&info->port.open_wait); - else if (info->port.tty) - tty_hangup(info->port.tty); + wake_up_interruptible(&port->open_wait); + else if (port->tty) + tty_hangup(port->tty); } } /** * uart_handle_cts_change - handle a change of clear-to-send state - * @port: uart_port structure for the open port + * @uport: uart_port structure for the open port * @status: new clear to send status, nonzero if active */ static inline void -uart_handle_cts_change(struct uart_port *port, unsigned int status) +uart_handle_cts_change(struct uart_port *uport, unsigned int status) { - struct uart_info *info = port->info; - struct tty_struct *tty = info->port.tty; + struct tty_port *port = &uport->state->port; + struct tty_struct *tty = port->tty; - port->icount.cts++; + uport->icount.cts++; - if (info->flags & UIF_CTS_FLOW) { + if (port->flags & ASYNC_CTS_FLOW) { if (tty->hw_stopped) { if (status) { tty->hw_stopped = 0; - port->ops->start_tx(port); - uart_write_wakeup(port); + uport->ops->start_tx(uport); + uart_write_wakeup(uport); } } else { if (!status) { tty->hw_stopped = 1; - port->ops->stop_tx(port); + uport->ops->stop_tx(uport); } } } @@ -552,7 +539,7 @@ static inline void uart_insert_char(struct uart_port *port, unsigned int status, unsigned int overrun, unsigned int ch, unsigned int flag) { - struct tty_struct *tty = port->info->port.tty; + struct tty_struct *tty = port->state->port.tty; if ((status & port->ignore_status_mask & ~overrun) == 0) tty_insert_flip_char(tty, ch, flag);