X-Git-Url: http://ftp.safe.ca/?a=blobdiff_plain;f=include%2Flinux%2Fnl80211.h;h=b7c77f9712f4bedd172ac9ef9ecdfd23a8ac084b;hb=HEAD;hp=05ba3539b77efed6a9811cd4ac3dee3f0eef27ac;hpb=6bad8766620a3c8b64afa981502fdb543e3cfd6c;p=safe%2Fjmp%2Flinux-2.6 diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index 05ba353..b7c77f9 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -3,7 +3,7 @@ /* * 802.11 netlink interface public header * - * Copyright 2006, 2007, 2008 Johannes Berg + * Copyright 2006-2010 Johannes Berg * Copyright 2008 Michael Wu * Copyright 2008 Luis Carlos Cobo * Copyright 2008 Michael Buesch @@ -25,6 +25,8 @@ * */ +#include + /** * DOC: Station handling * @@ -46,8 +48,12 @@ * to get a list of all present wiphys. * @NL80211_CMD_SET_WIPHY: set wiphy parameters, needs %NL80211_ATTR_WIPHY or * %NL80211_ATTR_IFINDEX; can be used to set %NL80211_ATTR_WIPHY_NAME, - * %NL80211_ATTR_WIPHY_TXQ_PARAMS, %NL80211_ATTR_WIPHY_FREQ, and/or - * %NL80211_ATTR_WIPHY_CHANNEL_TYPE. + * %NL80211_ATTR_WIPHY_TXQ_PARAMS, %NL80211_ATTR_WIPHY_FREQ, + * %NL80211_ATTR_WIPHY_CHANNEL_TYPE, %NL80211_ATTR_WIPHY_RETRY_SHORT, + * %NL80211_ATTR_WIPHY_RETRY_LONG, %NL80211_ATTR_WIPHY_FRAG_THRESHOLD, + * and/or %NL80211_ATTR_WIPHY_RTS_THRESHOLD. + * However, for setting the channel, see %NL80211_CMD_SET_CHANNEL + * instead, the support here is for backward compatibility only. * @NL80211_CMD_NEW_WIPHY: Newly created wiphy, response to get request * or rename notification. Has attributes %NL80211_ATTR_WIPHY and * %NL80211_ATTR_WIPHY_NAME. @@ -75,8 +81,8 @@ * @NL80211_CMD_SET_KEY: Set key attributes %NL80211_ATTR_KEY_DEFAULT, * %NL80211_ATTR_KEY_DEFAULT_MGMT, or %NL80211_ATTR_KEY_THRESHOLD. * @NL80211_CMD_NEW_KEY: add a key with given %NL80211_ATTR_KEY_DATA, - * %NL80211_ATTR_KEY_IDX, %NL80211_ATTR_MAC and %NL80211_ATTR_KEY_CIPHER - * attributes. + * %NL80211_ATTR_KEY_IDX, %NL80211_ATTR_MAC, %NL80211_ATTR_KEY_CIPHER, + * and %NL80211_ATTR_KEY_SEQ attributes. * @NL80211_CMD_DEL_KEY: delete a key identified by %NL80211_ATTR_KEY_IDX * or %NL80211_ATTR_MAC. * @@ -156,6 +162,11 @@ * @NL80211_CMD_SCAN_ABORTED: scan was aborted, for unspecified reasons, * partial scan results may be available * + * @NL80211_CMD_GET_SURVEY: get survey resuls, e.g. channel occupation + * or noise level + * @NL80211_CMD_NEW_SURVEY_RESULTS: survey data notification (as a reply to + * NL80211_CMD_GET_SURVEY and on the "scan" multicast group) + * * @NL80211_CMD_REG_CHANGE: indicates to userspace the regulatory domain * has been changed and provides details of the request information * that caused the change such as who initiated the regulatory request @@ -201,8 +212,12 @@ * frame, i.e., it was for the local STA and was received in correct * state. This is similar to MLME-AUTHENTICATE.confirm primitive in the * MLME SAP interface (kernel providing MLME, userspace SME). The - * included NL80211_ATTR_FRAME attribute contains the management frame - * (including both the header and frame body, but not FCS). + * included %NL80211_ATTR_FRAME attribute contains the management frame + * (including both the header and frame body, but not FCS). This event is + * also used to indicate if the authentication attempt timed out. In that + * case the %NL80211_ATTR_FRAME attribute is replaced with a + * %NL80211_ATTR_TIMED_OUT flag (and %NL80211_ATTR_MAC to indicate which + * pending authentication timed out). * @NL80211_CMD_ASSOCIATE: association request and notification; like * NL80211_CMD_AUTHENTICATE but for Association and Reassociation * (similar to MLME-ASSOCIATE.request, MLME-REASSOCIATE.request, @@ -223,6 +238,109 @@ * %NL80211_ATTR_KEY_SEQ to indicate the TSC value of the frame; this * event matches with MLME-MICHAELMICFAILURE.indication() primitive * + * @NL80211_CMD_JOIN_IBSS: Join a new IBSS -- given at least an SSID and a + * FREQ attribute (for the initial frequency if no peer can be found) + * and optionally a MAC (as BSSID) and FREQ_FIXED attribute if those + * should be fixed rather than automatically determined. Can only be + * executed on a network interface that is UP, and fixed BSSID/FREQ + * may be rejected. Another optional parameter is the beacon interval, + * given in the %NL80211_ATTR_BEACON_INTERVAL attribute, which if not + * given defaults to 100 TU (102.4ms). + * @NL80211_CMD_LEAVE_IBSS: Leave the IBSS -- no special arguments, the IBSS is + * determined by the network interface. + * + * @NL80211_CMD_TESTMODE: testmode command, takes a wiphy (or ifindex) attribute + * to identify the device, and the TESTDATA blob attribute to pass through + * to the driver. + * + * @NL80211_CMD_CONNECT: connection request and notification; this command + * requests to connect to a specified network but without separating + * auth and assoc steps. For this, you need to specify the SSID in a + * %NL80211_ATTR_SSID attribute, and can optionally specify the association + * IEs in %NL80211_ATTR_IE, %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_MAC, + * %NL80211_ATTR_WIPHY_FREQ and %NL80211_ATTR_CONTROL_PORT. + * It is also sent as an event, with the BSSID and response IEs when the + * connection is established or failed to be established. This can be + * determined by the STATUS_CODE attribute. + * @NL80211_CMD_ROAM: request that the card roam (currently not implemented), + * sent as an event when the card/driver roamed by itself. + * @NL80211_CMD_DISCONNECT: drop a given connection; also used to notify + * userspace that a connection was dropped by the AP or due to other + * reasons, for this the %NL80211_ATTR_DISCONNECTED_BY_AP and + * %NL80211_ATTR_REASON_CODE attributes are used. + * + * @NL80211_CMD_SET_WIPHY_NETNS: Set a wiphy's netns. Note that all devices + * associated with this wiphy must be down and will follow. + * + * @NL80211_CMD_REMAIN_ON_CHANNEL: Request to remain awake on the specified + * channel for the specified amount of time. This can be used to do + * off-channel operations like transmit a Public Action frame and wait for + * a response while being associated to an AP on another channel. + * %NL80211_ATTR_WIPHY or %NL80211_ATTR_IFINDEX is used to specify which + * radio is used. %NL80211_ATTR_WIPHY_FREQ is used to specify the + * frequency for the operation and %NL80211_ATTR_WIPHY_CHANNEL_TYPE may be + * optionally used to specify additional channel parameters. + * %NL80211_ATTR_DURATION is used to specify the duration in milliseconds + * to remain on the channel. This command is also used as an event to + * notify when the requested duration starts (it may take a while for the + * driver to schedule this time due to other concurrent needs for the + * radio). + * When called, this operation returns a cookie (%NL80211_ATTR_COOKIE) + * that will be included with any events pertaining to this request; + * the cookie is also used to cancel the request. + * @NL80211_CMD_CANCEL_REMAIN_ON_CHANNEL: This command can be used to cancel a + * pending remain-on-channel duration if the desired operation has been + * completed prior to expiration of the originally requested duration. + * %NL80211_ATTR_WIPHY or %NL80211_ATTR_IFINDEX is used to specify the + * radio. The %NL80211_ATTR_COOKIE attribute must be given as well to + * uniquely identify the request. + * This command is also used as an event to notify when a requested + * remain-on-channel duration has expired. + * + * @NL80211_CMD_SET_TX_BITRATE_MASK: Set the mask of rates to be used in TX + * rate selection. %NL80211_ATTR_IFINDEX is used to specify the interface + * and @NL80211_ATTR_TX_RATES the set of allowed rates. + * + * @NL80211_CMD_REGISTER_ACTION: Register for receiving certain action frames + * (via @NL80211_CMD_ACTION) for processing in userspace. This command + * requires an interface index and a match attribute containing the first + * few bytes of the frame that should match, e.g. a single byte for only + * a category match or four bytes for vendor frames including the OUI. + * The registration cannot be dropped, but is removed automatically + * when the netlink socket is closed. Multiple registrations can be made. + * @NL80211_CMD_ACTION: Action frame TX request and RX notification. This + * command is used both as a request to transmit an Action frame and as an + * event indicating reception of an Action frame that was not processed in + * kernel code, but is for us (i.e., which may need to be processed in a + * user space application). %NL80211_ATTR_FRAME is used to specify the + * frame contents (including header). %NL80211_ATTR_WIPHY_FREQ (and + * optionally %NL80211_ATTR_WIPHY_CHANNEL_TYPE) is used to indicate on + * which channel the frame is to be transmitted or was received. This + * channel has to be the current channel (remain-on-channel or the + * operational channel). When called, this operation returns a cookie + * (%NL80211_ATTR_COOKIE) that will be included with the TX status event + * pertaining to the TX request. + * @NL80211_CMD_ACTION_TX_STATUS: Report TX status of an Action frame + * transmitted with %NL80211_CMD_ACTION. %NL80211_ATTR_COOKIE identifies + * the TX command and %NL80211_ATTR_FRAME includes the contents of the + * frame. %NL80211_ATTR_ACK flag is included if the recipient acknowledged + * the frame. + * @NL80211_CMD_SET_CQM: Connection quality monitor configuration. This command + * is used to configure connection quality monitoring notification trigger + * levels. + * @NL80211_CMD_NOTIFY_CQM: Connection quality monitor notification. This + * command is used as an event to indicate the that a trigger level was + * reached. + * @NL80211_CMD_SET_CHANNEL: Set the channel (using %NL80211_ATTR_WIPHY_FREQ + * and %NL80211_ATTR_WIPHY_CHANNEL_TYPE) the given interface (identifed + * by %NL80211_ATTR_IFINDEX) shall operate on. + * In case multiple channels are supported by the device, the mechanism + * with which it switches channels is implementation-defined. + * When a monitor interface is given, it can only switch channel while + * no other interfaces are operating to avoid disturbing the operation + * of any other interfaces, and other interfaces will again take + * precedence when they are used. + * * @NL80211_CMD_MAX: highest used command number * @__NL80211_CMD_AFTER_LAST: internal use */ @@ -288,6 +406,41 @@ enum nl80211_commands { NL80211_CMD_REG_BEACON_HINT, + NL80211_CMD_JOIN_IBSS, + NL80211_CMD_LEAVE_IBSS, + + NL80211_CMD_TESTMODE, + + NL80211_CMD_CONNECT, + NL80211_CMD_ROAM, + NL80211_CMD_DISCONNECT, + + NL80211_CMD_SET_WIPHY_NETNS, + + NL80211_CMD_GET_SURVEY, + NL80211_CMD_NEW_SURVEY_RESULTS, + + NL80211_CMD_SET_PMKSA, + NL80211_CMD_DEL_PMKSA, + NL80211_CMD_FLUSH_PMKSA, + + NL80211_CMD_REMAIN_ON_CHANNEL, + NL80211_CMD_CANCEL_REMAIN_ON_CHANNEL, + + NL80211_CMD_SET_TX_BITRATE_MASK, + + NL80211_CMD_REGISTER_ACTION, + NL80211_CMD_ACTION, + NL80211_CMD_ACTION_TX_STATUS, + + NL80211_CMD_SET_POWER_SAVE, + NL80211_CMD_GET_POWER_SAVE, + + NL80211_CMD_SET_CQM, + NL80211_CMD_NOTIFY_CQM, + + NL80211_CMD_SET_CHANNEL, + /* add new commands above here */ /* used to define NL80211_CMD_MAX below */ @@ -325,6 +478,20 @@ enum nl80211_commands { * NL80211_CHAN_HT20 = HT20 only * NL80211_CHAN_HT40MINUS = secondary channel is below the primary channel * NL80211_CHAN_HT40PLUS = secondary channel is above the primary channel + * @NL80211_ATTR_WIPHY_RETRY_SHORT: TX retry limit for frames whose length is + * less than or equal to the RTS threshold; allowed range: 1..255; + * dot11ShortRetryLimit; u8 + * @NL80211_ATTR_WIPHY_RETRY_LONG: TX retry limit for frames whose length is + * greater than the RTS threshold; allowed range: 1..255; + * dot11ShortLongLimit; u8 + * @NL80211_ATTR_WIPHY_FRAG_THRESHOLD: fragmentation threshold, i.e., maximum + * length in octets for frames; allowed range: 256..8000, disable + * fragmentation with (u32)-1; dot11FragmentationThreshold; u32 + * @NL80211_ATTR_WIPHY_RTS_THRESHOLD: RTS threshold (TX frames with length + * larger than or equal to this use RTS/CTS handshake); allowed range: + * 0..65536, disable with (u32)-1; dot11RTSThreshold; u32 + * @NL80211_ATTR_WIPHY_COVERAGE_CLASS: Coverage Class as defined by IEEE 802.11 + * section 7.3.2.9; dot11CoverageClass; u8 * * @NL80211_ATTR_IFINDEX: network interface index of the device to operate on * @NL80211_ATTR_IFNAME: network interface name @@ -348,7 +515,7 @@ enum nl80211_commands { * * @NL80211_ATTR_STA_AID: Association ID for the station (u16) * @NL80211_ATTR_STA_FLAGS: flags, nested element with NLA_FLAG attributes of - * &enum nl80211_sta_flags. + * &enum nl80211_sta_flags (deprecated, use %NL80211_ATTR_STA_FLAGS2) * @NL80211_ATTR_STA_LISTEN_INTERVAL: listen interval as defined by * IEEE 802.11 7.3.1.6 (u16). * @NL80211_ATTR_STA_SUPPORTED_RATES: supported rates, array of supported @@ -415,10 +582,6 @@ enum nl80211_commands { * @NL80211_ATTR_SCAN_FREQUENCIES: nested attribute with frequencies (in MHz) * @NL80211_ATTR_SCAN_SSIDS: nested attribute with SSIDs, leave out for passive * scanning and include a zero-length SSID (wildcard) for wildcard scan - * @NL80211_ATTR_SCAN_GENERATION: the scan generation increases whenever the - * scan result list changes (BSS expired or added) so that applications - * can verify that they got a single, consistent snapshot (when all dump - * messages carried the same generation number) * @NL80211_ATTR_BSS: scan result BSS * * @NL80211_ATTR_REG_INITIATOR: indicates who requested the regulatory domain @@ -453,6 +616,115 @@ enum nl80211_commands { * attributes consists of a nested attribute containing * NL80211_FREQUENCY_ATTR_* * + * @NL80211_ATTR_CIPHER_SUITES: a set of u32 values indicating the supported + * cipher suites + * + * @NL80211_ATTR_FREQ_FIXED: a flag indicating the IBSS should not try to look + * for other networks on different channels + * + * @NL80211_ATTR_TIMED_OUT: a flag indicating than an operation timed out; this + * is used, e.g., with %NL80211_CMD_AUTHENTICATE event + * + * @NL80211_ATTR_USE_MFP: Whether management frame protection (IEEE 802.11w) is + * used for the association (&enum nl80211_mfp, represented as a u32); + * this attribute can be used + * with %NL80211_CMD_ASSOCIATE request + * + * @NL80211_ATTR_STA_FLAGS2: Attribute containing a + * &struct nl80211_sta_flag_update. + * + * @NL80211_ATTR_CONTROL_PORT: A flag indicating whether user space controls + * IEEE 802.1X port, i.e., sets/clears %NL80211_STA_FLAG_AUTHORIZED, in + * station mode. If the flag is included in %NL80211_CMD_ASSOCIATE + * request, the driver will assume that the port is unauthorized until + * authorized by user space. Otherwise, port is marked authorized by + * default in station mode. + * + * @NL80211_ATTR_TESTDATA: Testmode data blob, passed through to the driver. + * We recommend using nested, driver-specific attributes within this. + * + * @NL80211_ATTR_DISCONNECTED_BY_AP: A flag indicating that the DISCONNECT + * event was due to the AP disconnecting the station, and not due to + * a local disconnect request. + * @NL80211_ATTR_STATUS_CODE: StatusCode for the %NL80211_CMD_CONNECT + * event (u16) + * @NL80211_ATTR_PRIVACY: Flag attribute, used with connect(), indicating + * that protected APs should be used. + * + * @NL80211_ATTR_CIPHERS_PAIRWISE: Used with CONNECT and ASSOCIATE to + * indicate which unicast key ciphers will be used with the connection + * (an array of u32). + * @NL80211_ATTR_CIPHER_GROUP: Used with CONNECT and ASSOCIATE to indicate + * which group key cipher will be used with the connection (a u32). + * @NL80211_ATTR_WPA_VERSIONS: Used with CONNECT and ASSOCIATE to indicate + * which WPA version(s) the AP we want to associate with is using + * (a u32 with flags from &enum nl80211_wpa_versions). + * @NL80211_ATTR_AKM_SUITES: Used with CONNECT and ASSOCIATE to indicate + * which key management algorithm(s) to use (an array of u32). + * + * @NL80211_ATTR_REQ_IE: (Re)association request information elements as + * sent out by the card, for ROAM and successful CONNECT events. + * @NL80211_ATTR_RESP_IE: (Re)association response information elements as + * sent by peer, for ROAM and successful CONNECT events. + * + * @NL80211_ATTR_PREV_BSSID: previous BSSID, to be used by in ASSOCIATE + * commands to specify using a reassociate frame + * + * @NL80211_ATTR_KEY: key information in a nested attribute with + * %NL80211_KEY_* sub-attributes + * @NL80211_ATTR_KEYS: array of keys for static WEP keys for connect() + * and join_ibss(), key information is in a nested attribute each + * with %NL80211_KEY_* sub-attributes + * + * @NL80211_ATTR_PID: Process ID of a network namespace. + * + * @NL80211_ATTR_GENERATION: Used to indicate consistent snapshots for + * dumps. This number increases whenever the object list being + * dumped changes, and as such userspace can verify that it has + * obtained a complete and consistent snapshot by verifying that + * all dump messages contain the same generation number. If it + * changed then the list changed and the dump should be repeated + * completely from scratch. + * + * @NL80211_ATTR_4ADDR: Use 4-address frames on a virtual interface + * + * @NL80211_ATTR_SURVEY_INFO: survey information about a channel, part of + * the survey response for %NL80211_CMD_GET_SURVEY, nested attribute + * containing info as possible, see &enum survey_info. + * + * @NL80211_ATTR_PMKID: PMK material for PMKSA caching. + * @NL80211_ATTR_MAX_NUM_PMKIDS: maximum number of PMKIDs a firmware can + * cache, a wiphy attribute. + * + * @NL80211_ATTR_DURATION: Duration of an operation in milliseconds, u32. + * + * @NL80211_ATTR_COOKIE: Generic 64-bit cookie to identify objects. + * + * @NL80211_ATTR_TX_RATES: Nested set of attributes + * (enum nl80211_tx_rate_attributes) describing TX rates per band. The + * enum nl80211_band value is used as the index (nla_type() of the nested + * data. If a band is not included, it will be configured to allow all + * rates based on negotiated supported rates information. This attribute + * is used with %NL80211_CMD_SET_TX_BITRATE_MASK. + * + * @NL80211_ATTR_FRAME_MATCH: A binary attribute which typically must contain + * at least one byte, currently used with @NL80211_CMD_REGISTER_ACTION. + * + * @NL80211_ATTR_ACK: Flag attribute indicating that the frame was + * acknowledged by the recipient. + * + * @NL80211_ATTR_CQM: connection quality monitor configuration in a + * nested attribute with %NL80211_ATTR_CQM_* sub-attributes. + * + * @NL80211_ATTR_LOCAL_STATE_CHANGE: Flag attribute to indicate that a command + * is requesting a local authentication/association state change without + * invoking actual management frame exchange. This can be used with + * NL80211_CMD_AUTHENTICATE, NL80211_CMD_DEAUTHENTICATE, + * NL80211_CMD_DISASSOCIATE. + * + * @NL80211_ATTR_AP_ISOLATE: (AP mode) Do not forward traffic between stations + * connected to this BSS. + * * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use */ @@ -524,7 +796,7 @@ enum nl80211_attrs { NL80211_ATTR_SCAN_FREQUENCIES, NL80211_ATTR_SCAN_SSIDS, - NL80211_ATTR_SCAN_GENERATION, + NL80211_ATTR_GENERATION, /* replaces old SCAN_GENERATION */ NL80211_ATTR_BSS, NL80211_ATTR_REG_INITIATOR, @@ -540,19 +812,90 @@ enum nl80211_attrs { NL80211_ATTR_KEY_TYPE, NL80211_ATTR_MAX_SCAN_IE_LEN, + NL80211_ATTR_CIPHER_SUITES, NL80211_ATTR_FREQ_BEFORE, NL80211_ATTR_FREQ_AFTER, + + NL80211_ATTR_FREQ_FIXED, + + + NL80211_ATTR_WIPHY_RETRY_SHORT, + NL80211_ATTR_WIPHY_RETRY_LONG, + NL80211_ATTR_WIPHY_FRAG_THRESHOLD, + NL80211_ATTR_WIPHY_RTS_THRESHOLD, + + NL80211_ATTR_TIMED_OUT, + + NL80211_ATTR_USE_MFP, + + NL80211_ATTR_STA_FLAGS2, + + NL80211_ATTR_CONTROL_PORT, + + NL80211_ATTR_TESTDATA, + + NL80211_ATTR_PRIVACY, + + NL80211_ATTR_DISCONNECTED_BY_AP, + NL80211_ATTR_STATUS_CODE, + + NL80211_ATTR_CIPHER_SUITES_PAIRWISE, + NL80211_ATTR_CIPHER_SUITE_GROUP, + NL80211_ATTR_WPA_VERSIONS, + NL80211_ATTR_AKM_SUITES, + + NL80211_ATTR_REQ_IE, + NL80211_ATTR_RESP_IE, + + NL80211_ATTR_PREV_BSSID, + + NL80211_ATTR_KEY, + NL80211_ATTR_KEYS, + + NL80211_ATTR_PID, + + NL80211_ATTR_4ADDR, + + NL80211_ATTR_SURVEY_INFO, + + NL80211_ATTR_PMKID, + NL80211_ATTR_MAX_NUM_PMKIDS, + + NL80211_ATTR_DURATION, + + NL80211_ATTR_COOKIE, + + NL80211_ATTR_WIPHY_COVERAGE_CLASS, + + NL80211_ATTR_TX_RATES, + + NL80211_ATTR_FRAME_MATCH, + + NL80211_ATTR_ACK, + + NL80211_ATTR_PS_STATE, + + NL80211_ATTR_CQM, + + NL80211_ATTR_LOCAL_STATE_CHANGE, + + NL80211_ATTR_AP_ISOLATE, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, NL80211_ATTR_MAX = __NL80211_ATTR_AFTER_LAST - 1 }; +/* source-level API compatibility */ +#define NL80211_ATTR_SCAN_GENERATION NL80211_ATTR_GENERATION + /* * Allow user space programs to use #ifdef on new attributes by defining them * here */ +#define NL80211_CMD_CONNECT NL80211_CMD_CONNECT #define NL80211_ATTR_HT_CAPABILITY NL80211_ATTR_HT_CAPABILITY #define NL80211_ATTR_BSS_BASIC_RATES NL80211_ATTR_BSS_BASIC_RATES #define NL80211_ATTR_WIPHY_TXQ_PARAMS NL80211_ATTR_WIPHY_TXQ_PARAMS @@ -566,6 +909,12 @@ enum nl80211_attrs { #define NL80211_ATTR_SSID NL80211_ATTR_SSID #define NL80211_ATTR_AUTH_TYPE NL80211_ATTR_AUTH_TYPE #define NL80211_ATTR_REASON_CODE NL80211_ATTR_REASON_CODE +#define NL80211_ATTR_CIPHER_SUITES_PAIRWISE NL80211_ATTR_CIPHER_SUITES_PAIRWISE +#define NL80211_ATTR_CIPHER_SUITE_GROUP NL80211_ATTR_CIPHER_SUITE_GROUP +#define NL80211_ATTR_WPA_VERSIONS NL80211_ATTR_WPA_VERSIONS +#define NL80211_ATTR_AKM_SUITES NL80211_ATTR_AKM_SUITES +#define NL80211_ATTR_KEY NL80211_ATTR_KEY +#define NL80211_ATTR_KEYS NL80211_ATTR_KEYS #define NL80211_MAX_SUPP_RATES 32 #define NL80211_MAX_SUPP_REG_RULES 32 @@ -574,6 +923,9 @@ enum nl80211_attrs { #define NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY 24 #define NL80211_HT_CAPABILITY_LEN 26 +#define NL80211_MAX_NR_CIPHER_SUITES 5 +#define NL80211_MAX_NR_AKM_SUITES 2 + /** * enum nl80211_iftype - (virtual) interface types * @@ -632,6 +984,18 @@ enum nl80211_sta_flags { }; /** + * struct nl80211_sta_flag_update - station flags mask/set + * @mask: mask of station flags to set + * @set: which values to set them to + * + * Both mask and set contain bits as per &enum nl80211_sta_flags. + */ +struct nl80211_sta_flag_update { + __u32 mask; + __u32 set; +} __attribute__((packed)); + +/** * enum nl80211_rate_info - bitrate information * * These attribute types are used with %NL80211_STA_INFO_TXRATE @@ -699,14 +1063,14 @@ enum nl80211_sta_info { * * @NL80211_MPATH_FLAG_ACTIVE: the mesh path is active * @NL80211_MPATH_FLAG_RESOLVING: the mesh path discovery process is running - * @NL80211_MPATH_FLAG_DSN_VALID: the mesh path contains a valid DSN + * @NL80211_MPATH_FLAG_SN_VALID: the mesh path contains a valid SN * @NL80211_MPATH_FLAG_FIXED: the mesh path has been manually set * @NL80211_MPATH_FLAG_RESOLVED: the mesh path discovery process succeeded */ enum nl80211_mpath_flags { NL80211_MPATH_FLAG_ACTIVE = 1<<0, NL80211_MPATH_FLAG_RESOLVING = 1<<1, - NL80211_MPATH_FLAG_DSN_VALID = 1<<2, + NL80211_MPATH_FLAG_SN_VALID = 1<<2, NL80211_MPATH_FLAG_FIXED = 1<<3, NL80211_MPATH_FLAG_RESOLVED = 1<<4, }; @@ -719,7 +1083,7 @@ enum nl80211_mpath_flags { * * @__NL80211_MPATH_INFO_INVALID: attribute number 0 is reserved * @NL80211_ATTR_MPATH_FRAME_QLEN: number of queued frames for this destination - * @NL80211_ATTR_MPATH_DSN: destination sequence number + * @NL80211_ATTR_MPATH_SN: destination sequence number * @NL80211_ATTR_MPATH_METRIC: metric (cost) of this mesh path * @NL80211_ATTR_MPATH_EXPTIME: expiration time for the path, in msec from now * @NL80211_ATTR_MPATH_FLAGS: mesh path flags, enumerated in @@ -730,7 +1094,7 @@ enum nl80211_mpath_flags { enum nl80211_mpath_info { __NL80211_MPATH_INFO_INVALID, NL80211_MPATH_INFO_FRAME_QLEN, - NL80211_MPATH_INFO_DSN, + NL80211_MPATH_INFO_SN, NL80211_MPATH_INFO_METRIC, NL80211_MPATH_INFO_EXPTIME, NL80211_MPATH_INFO_FLAGS, @@ -921,6 +1285,26 @@ enum nl80211_reg_rule_flags { }; /** + * enum nl80211_survey_info - survey information + * + * These attribute types are used with %NL80211_ATTR_SURVEY_INFO + * when getting information about a survey. + * + * @__NL80211_SURVEY_INFO_INVALID: attribute number 0 is reserved + * @NL80211_SURVEY_INFO_FREQUENCY: center frequency of channel + * @NL80211_SURVEY_INFO_NOISE: noise level of channel (u8, dBm) + */ +enum nl80211_survey_info { + __NL80211_SURVEY_INFO_INVALID, + NL80211_SURVEY_INFO_FREQUENCY, + NL80211_SURVEY_INFO_NOISE, + + /* keep last */ + __NL80211_SURVEY_INFO_AFTER_LAST, + NL80211_SURVEY_INFO_MAX = __NL80211_SURVEY_INFO_AFTER_LAST - 1 +}; + +/** * enum nl80211_mntr_flags - monitor configuration flags * * Monitor configuration flags. @@ -1000,6 +1384,8 @@ enum nl80211_mntr_flags { * @NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME: The interval of time (in TUs) * that it takes for an HWMP information element to propagate across the mesh * + * @NL80211_MESHCONF_ROOTMODE: whether root mode is enabled or not + * * @NL80211_MESHCONF_ATTR_MAX: highest possible mesh configuration attribute * * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use @@ -1019,6 +1405,7 @@ enum nl80211_meshconf_params { NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT, NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL, NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME, + NL80211_MESHCONF_HWMP_ROOTMODE, /* keep last */ __NL80211_MESHCONF_ATTR_AFTER_LAST, @@ -1075,11 +1462,20 @@ enum nl80211_channel_type { * @NL80211_BSS_BEACON_INTERVAL: beacon interval of the (I)BSS (u16) * @NL80211_BSS_CAPABILITY: capability field (CPU order, u16) * @NL80211_BSS_INFORMATION_ELEMENTS: binary attribute containing the - * raw information elements from the probe response/beacon (bin) + * raw information elements from the probe response/beacon (bin); + * if the %NL80211_BSS_BEACON_IES attribute is present, the IEs here are + * from a Probe Response frame; otherwise they are from a Beacon frame. + * However, if the driver does not indicate the source of the IEs, these + * IEs may be from either frame subtype. * @NL80211_BSS_SIGNAL_MBM: signal strength of probe response/beacon * in mBm (100 * dBm) (s32) * @NL80211_BSS_SIGNAL_UNSPEC: signal strength of the probe response/beacon * in unspecified units, scaled to 0..100 (u8) + * @NL80211_BSS_STATUS: status, if this BSS is "used" + * @NL80211_BSS_SEEN_MS_AGO: age of this BSS entry in ms + * @NL80211_BSS_BEACON_IES: binary attribute containing the raw information + * elements from a Beacon frame (bin); not present if no Beacon frame has + * yet been received * @__NL80211_BSS_AFTER_LAST: internal * @NL80211_BSS_MAX: highest BSS attribute */ @@ -1093,6 +1489,9 @@ enum nl80211_bss { NL80211_BSS_INFORMATION_ELEMENTS, NL80211_BSS_SIGNAL_MBM, NL80211_BSS_SIGNAL_UNSPEC, + NL80211_BSS_STATUS, + NL80211_BSS_SEEN_MS_AGO, + NL80211_BSS_BEACON_IES, /* keep last */ __NL80211_BSS_AFTER_LAST, @@ -1100,18 +1499,37 @@ enum nl80211_bss { }; /** + * enum nl80211_bss_status - BSS "status" + */ +enum nl80211_bss_status { + NL80211_BSS_STATUS_AUTHENTICATED, + NL80211_BSS_STATUS_ASSOCIATED, + NL80211_BSS_STATUS_IBSS_JOINED, +}; + +/** * enum nl80211_auth_type - AuthenticationType * * @NL80211_AUTHTYPE_OPEN_SYSTEM: Open System authentication * @NL80211_AUTHTYPE_SHARED_KEY: Shared Key authentication (WEP only) * @NL80211_AUTHTYPE_FT: Fast BSS Transition (IEEE 802.11r) * @NL80211_AUTHTYPE_NETWORK_EAP: Network EAP (some Cisco APs and mainly LEAP) + * @__NL80211_AUTHTYPE_NUM: internal + * @NL80211_AUTHTYPE_MAX: maximum valid auth algorithm + * @NL80211_AUTHTYPE_AUTOMATIC: determine automatically (if necessary by + * trying multiple times); this is invalid in netlink -- leave out + * the attribute for this on CONNECT commands. */ enum nl80211_auth_type { NL80211_AUTHTYPE_OPEN_SYSTEM, NL80211_AUTHTYPE_SHARED_KEY, NL80211_AUTHTYPE_FT, NL80211_AUTHTYPE_NETWORK_EAP, + + /* keep last */ + __NL80211_AUTHTYPE_NUM, + NL80211_AUTHTYPE_MAX = __NL80211_AUTHTYPE_NUM - 1, + NL80211_AUTHTYPE_AUTOMATIC }; /** @@ -1126,4 +1544,119 @@ enum nl80211_key_type { NL80211_KEYTYPE_PEERKEY, }; +/** + * enum nl80211_mfp - Management frame protection state + * @NL80211_MFP_NO: Management frame protection not used + * @NL80211_MFP_REQUIRED: Management frame protection required + */ +enum nl80211_mfp { + NL80211_MFP_NO, + NL80211_MFP_REQUIRED, +}; + +enum nl80211_wpa_versions { + NL80211_WPA_VERSION_1 = 1 << 0, + NL80211_WPA_VERSION_2 = 1 << 1, +}; + +/** + * enum nl80211_key_attributes - key attributes + * @__NL80211_KEY_INVALID: invalid + * @NL80211_KEY_DATA: (temporal) key data; for TKIP this consists of + * 16 bytes encryption key followed by 8 bytes each for TX and RX MIC + * keys + * @NL80211_KEY_IDX: key ID (u8, 0-3) + * @NL80211_KEY_CIPHER: key cipher suite (u32, as defined by IEEE 802.11 + * section 7.3.2.25.1, e.g. 0x000FAC04) + * @NL80211_KEY_SEQ: transmit key sequence number (IV/PN) for TKIP and + * CCMP keys, each six bytes in little endian + * @NL80211_KEY_DEFAULT: flag indicating default key + * @NL80211_KEY_DEFAULT_MGMT: flag indicating default management key + * @__NL80211_KEY_AFTER_LAST: internal + * @NL80211_KEY_MAX: highest key attribute + */ +enum nl80211_key_attributes { + __NL80211_KEY_INVALID, + NL80211_KEY_DATA, + NL80211_KEY_IDX, + NL80211_KEY_CIPHER, + NL80211_KEY_SEQ, + NL80211_KEY_DEFAULT, + NL80211_KEY_DEFAULT_MGMT, + + /* keep last */ + __NL80211_KEY_AFTER_LAST, + NL80211_KEY_MAX = __NL80211_KEY_AFTER_LAST - 1 +}; + +/** + * enum nl80211_tx_rate_attributes - TX rate set attributes + * @__NL80211_TXRATE_INVALID: invalid + * @NL80211_TXRATE_LEGACY: Legacy (non-MCS) rates allowed for TX rate selection + * in an array of rates as defined in IEEE 802.11 7.3.2.2 (u8 values with + * 1 = 500 kbps) but without the IE length restriction (at most + * %NL80211_MAX_SUPP_RATES in a single array). + * @__NL80211_TXRATE_AFTER_LAST: internal + * @NL80211_TXRATE_MAX: highest TX rate attribute + */ +enum nl80211_tx_rate_attributes { + __NL80211_TXRATE_INVALID, + NL80211_TXRATE_LEGACY, + + /* keep last */ + __NL80211_TXRATE_AFTER_LAST, + NL80211_TXRATE_MAX = __NL80211_TXRATE_AFTER_LAST - 1 +}; + +/** + * enum nl80211_band - Frequency band + * @NL80211_BAND_2GHZ - 2.4 GHz ISM band + * @NL80211_BAND_5GHZ - around 5 GHz band (4.9 - 5.7 GHz) + */ +enum nl80211_band { + NL80211_BAND_2GHZ, + NL80211_BAND_5GHZ, +}; + +enum nl80211_ps_state { + NL80211_PS_DISABLED, + NL80211_PS_ENABLED, +}; + +/** + * enum nl80211_attr_cqm - connection quality monitor attributes + * @__NL80211_ATTR_CQM_INVALID: invalid + * @NL80211_ATTR_CQM_RSSI_THOLD: RSSI threshold in dBm. This value specifies + * the threshold for the RSSI level at which an event will be sent. Zero + * to disable. + * @NL80211_ATTR_CQM_RSSI_HYST: RSSI hysteresis in dBm. This value specifies + * the minimum amount the RSSI level must change after an event before a + * new event may be issued (to reduce effects of RSSI oscillation). + * @NL80211_ATTR_CQM_RSSI_THRESHOLD_EVENT: RSSI threshold event + * @__NL80211_ATTR_CQM_AFTER_LAST: internal + * @NL80211_ATTR_CQM_MAX: highest key attribute + */ +enum nl80211_attr_cqm { + __NL80211_ATTR_CQM_INVALID, + NL80211_ATTR_CQM_RSSI_THOLD, + NL80211_ATTR_CQM_RSSI_HYST, + NL80211_ATTR_CQM_RSSI_THRESHOLD_EVENT, + + /* keep last */ + __NL80211_ATTR_CQM_AFTER_LAST, + NL80211_ATTR_CQM_MAX = __NL80211_ATTR_CQM_AFTER_LAST - 1 +}; + +/** + * enum nl80211_cqm_rssi_threshold_event - RSSI threshold event + * @NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW - The RSSI level is lower than the + * configured threshold + * @NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH - The RSSI is higher than the + * configured threshold + */ +enum nl80211_cqm_rssi_threshold_event { + NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW, + NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH, +}; + #endif /* __LINUX_NL80211_H */