X-Git-Url: http://ftp.safe.ca/?a=blobdiff_plain;f=include%2Flinux%2Fmdio.h;h=cfdf1df2875e4e12eff9a21dd24e29f0e873b64c;hb=d005ba6cc82440d9ebf96f3ec8f79c54578b898f;hp=5645c0f863dc02b806393c6b0cff03bda87a0c7f;hpb=af2a3eac2fe6a6d8e9fdf6927284b34466a7d808;p=safe%2Fjmp%2Flinux-2.6

diff --git a/include/linux/mdio.h b/include/linux/mdio.h
index 5645c0f..cfdf1df 100644
--- a/include/linux/mdio.h
+++ b/include/linux/mdio.h
@@ -45,13 +45,25 @@
 #define MDIO_PHYXS_LNSTAT	24	/* PHY XGXS lane state */
 
 /* Media-dependent registers. */
+#define MDIO_PMA_10GBT_SWAPPOL	130	/* 10GBASE-T pair swap & polarity */
 #define MDIO_PMA_10GBT_TXPWR	131	/* 10GBASE-T TX power control */
+#define MDIO_PMA_10GBT_SNR	133	/* 10GBASE-T SNR margin, lane A.
+					 * Lanes B-D are numbered 134-136. */
+#define MDIO_PMA_10GBR_FECABLE	170	/* 10GBASE-R FEC ability */
 #define MDIO_PCS_10GBX_STAT1	24	/* 10GBASE-X PCS status 1 */
 #define MDIO_PCS_10GBRT_STAT1	32	/* 10GBASE-R/-T PCS status 1 */
 #define MDIO_PCS_10GBRT_STAT2	33	/* 10GBASE-R/-T PCS status 2 */
 #define MDIO_AN_10GBT_CTRL	32	/* 10GBASE-T auto-negotiation control */
 #define MDIO_AN_10GBT_STAT	33	/* 10GBASE-T auto-negotiation status */
 
+/* LASI (Link Alarm Status Interrupt) registers, defined by XENPAK MSA. */
+#define MDIO_PMA_LASI_RXCTRL	0x9000	/* RX_ALARM control */
+#define MDIO_PMA_LASI_TXCTRL	0x9001	/* TX_ALARM control */
+#define MDIO_PMA_LASI_CTRL	0x9002	/* LASI control */
+#define MDIO_PMA_LASI_RXSTAT	0x9003	/* RX_ALARM status */
+#define MDIO_PMA_LASI_TXSTAT	0x9004	/* TX_ALARM status */
+#define MDIO_PMA_LASI_STAT	0x9005	/* LASI status */
+
 /* Control register 1. */
 /* Enable extended speed selection */
 #define MDIO_CTRL1_SPEEDSELEXT		(BMCR_SPEED1000 | BMCR_SPEED100)
@@ -184,9 +196,26 @@
 #define MDIO_PHYXS_LNSTAT_SYNC3		0x0008
 #define MDIO_PHYXS_LNSTAT_ALIGN		0x1000
 
+/* PMA 10GBASE-T pair swap & polarity */
+#define MDIO_PMA_10GBT_SWAPPOL_ABNX	0x0001	/* Pair A/B uncrossed */
+#define MDIO_PMA_10GBT_SWAPPOL_CDNX	0x0002	/* Pair C/D uncrossed */
+#define MDIO_PMA_10GBT_SWAPPOL_AREV	0x0100	/* Pair A polarity reversed */
+#define MDIO_PMA_10GBT_SWAPPOL_BREV	0x0200	/* Pair B polarity reversed */
+#define MDIO_PMA_10GBT_SWAPPOL_CREV	0x0400	/* Pair C polarity reversed */
+#define MDIO_PMA_10GBT_SWAPPOL_DREV	0x0800	/* Pair D polarity reversed */
+
 /* PMA 10GBASE-T TX power register. */
 #define MDIO_PMA_10GBT_TXPWR_SHORT	0x0001	/* Short-reach mode */
 
+/* PMA 10GBASE-T SNR registers. */
+/* Value is SNR margin in dB, clamped to range [-127, 127], plus 0x8000. */
+#define MDIO_PMA_10GBT_SNR_BIAS		0x8000
+#define MDIO_PMA_10GBT_SNR_MAX		127
+
+/* PMA 10GBASE-R FEC ability register. */
+#define MDIO_PMA_10GBR_FECABLE_ABLE	0x0001	/* FEC ability */
+#define MDIO_PMA_10GBR_FECABLE_ERRABLE	0x0002	/* FEC error indic. ability */
+
 /* PCS 10GBASE-R/-T status register 1. */
 #define MDIO_PCS_10GBRT_STAT1_BLKLK	0x0001	/* Block lock attained */
 
@@ -206,6 +235,26 @@
 #define MDIO_AN_10GBT_STAT_MS		0x4000	/* Master/slave config */
 #define MDIO_AN_10GBT_STAT_MSFLT	0x8000	/* Master/slave config fault */
 
+/* LASI RX_ALARM control/status registers. */
+#define MDIO_PMA_LASI_RX_PHYXSLFLT	0x0001	/* PHY XS RX local fault */
+#define MDIO_PMA_LASI_RX_PCSLFLT	0x0008	/* PCS RX local fault */
+#define MDIO_PMA_LASI_RX_PMALFLT	0x0010	/* PMA/PMD RX local fault */
+#define MDIO_PMA_LASI_RX_OPTICPOWERFLT	0x0020	/* RX optical power fault */
+#define MDIO_PMA_LASI_RX_WISLFLT	0x0200	/* WIS local fault */
+
+/* LASI TX_ALARM control/status registers. */
+#define MDIO_PMA_LASI_TX_PHYXSLFLT	0x0001	/* PHY XS TX local fault */
+#define MDIO_PMA_LASI_TX_PCSLFLT	0x0008	/* PCS TX local fault */
+#define MDIO_PMA_LASI_TX_PMALFLT	0x0010	/* PMA/PMD TX local fault */
+#define MDIO_PMA_LASI_TX_LASERPOWERFLT	0x0080	/* Laser output power fault */
+#define MDIO_PMA_LASI_TX_LASERTEMPFLT	0x0100	/* Laser temperature fault */
+#define MDIO_PMA_LASI_TX_LASERBICURRFLT	0x0200	/* Laser bias current fault */
+
+/* LASI control/status registers. */
+#define MDIO_PMA_LASI_LSALARM		0x0001	/* LS_ALARM enable/status */
+#define MDIO_PMA_LASI_TXALARM		0x0002	/* TX_ALARM enable/status */
+#define MDIO_PMA_LASI_RXALARM		0x0004	/* RX_ALARM enable/status */
+
 /* Mapping between MDIO PRTAD/DEVAD and mii_ioctl_data::phy_id */
 
 #define MDIO_PHY_ID_C45			0x8000
@@ -234,6 +283,9 @@ static inline __u16 mdio_phy_id_devad(int phy_id)
 	return phy_id & MDIO_PHY_ID_DEVAD;
 }
 
+#define MDIO_SUPPORTS_C22		1
+#define MDIO_SUPPORTS_C45		2
+
 #ifdef __KERNEL__ 
 
 /**
@@ -264,8 +316,6 @@ struct mdio_if_info {
 
 #define MDIO_PRTAD_NONE			(-1)
 #define MDIO_DEVAD_NONE			(-1)
-#define MDIO_SUPPORTS_C22		1
-#define MDIO_SUPPORTS_C45		2
 #define MDIO_EMULATE_C22		4
 
 struct ethtool_cmd;