X-Git-Url: http://ftp.safe.ca/?a=blobdiff_plain;f=include%2Flinux%2Flist.h;h=969f6e92d0895a93b593829159bdef20220b0dcb;hb=f653398c86a1c104f0992bd788dd4bb065449be4;hp=cdc96559e5aed675a02b1a48df8fa9e1773c89ab;hpb=3678d62f028689abc8ac5693b254e48f605f94ba;p=safe%2Fjmp%2Flinux-2.6

diff --git a/include/linux/list.h b/include/linux/list.h
index cdc9655..969f6e9 100644
--- a/include/linux/list.h
+++ b/include/linux/list.h
@@ -1,8 +1,6 @@
 #ifndef _LINUX_LIST_H
 #define _LINUX_LIST_H
 
-#ifdef __KERNEL__
-
 #include <linux/stddef.h>
 #include <linux/poison.h>
 #include <linux/prefetch.h>
@@ -63,14 +61,10 @@ extern void __list_add(struct list_head *new,
  * Insert a new entry after the specified head.
  * This is good for implementing stacks.
  */
-#ifndef CONFIG_DEBUG_LIST
 static inline void list_add(struct list_head *new, struct list_head *head)
 {
 	__list_add(new, head, head->next);
 }
-#else
-extern void list_add(struct list_head *new, struct list_head *head);
-#endif
 
 
 /**
@@ -87,65 +81,6 @@ static inline void list_add_tail(struct list_head *new, struct list_head *head)
 }
 
 /*
- * Insert a new entry between two known consecutive entries.
- *
- * This is only for internal list manipulation where we know
- * the prev/next entries already!
- */
-static inline void __list_add_rcu(struct list_head * new,
-		struct list_head * prev, struct list_head * next)
-{
-	new->next = next;
-	new->prev = prev;
-	smp_wmb();
-	next->prev = new;
-	prev->next = new;
-}
-
-/**
- * list_add_rcu - add a new entry to rcu-protected list
- * @new: new entry to be added
- * @head: list head to add it after
- *
- * Insert a new entry after the specified head.
- * This is good for implementing stacks.
- *
- * The caller must take whatever precautions are necessary
- * (such as holding appropriate locks) to avoid racing
- * with another list-mutation primitive, such as list_add_rcu()
- * or list_del_rcu(), running on this same list.
- * However, it is perfectly legal to run concurrently with
- * the _rcu list-traversal primitives, such as
- * list_for_each_entry_rcu().
- */
-static inline void list_add_rcu(struct list_head *new, struct list_head *head)
-{
-	__list_add_rcu(new, head, head->next);
-}
-
-/**
- * list_add_tail_rcu - add a new entry to rcu-protected list
- * @new: new entry to be added
- * @head: list head to add it before
- *
- * Insert a new entry before the specified head.
- * This is useful for implementing queues.
- *
- * The caller must take whatever precautions are necessary
- * (such as holding appropriate locks) to avoid racing
- * with another list-mutation primitive, such as list_add_tail_rcu()
- * or list_del_rcu(), running on this same list.
- * However, it is perfectly legal to run concurrently with
- * the _rcu list-traversal primitives, such as
- * list_for_each_entry_rcu().
- */
-static inline void list_add_tail_rcu(struct list_head *new,
-					struct list_head *head)
-{
-	__list_add_rcu(new, head->prev, head);
-}
-
-/*
  * Delete a list entry by making the prev/next entries
  * point to each other.
  *
@@ -161,7 +96,7 @@ static inline void __list_del(struct list_head * prev, struct list_head * next)
 /**
  * list_del - deletes entry from list.
  * @entry: the element to delete from the list.
- * Note: list_empty on entry does not return true after this, the entry is
+ * Note: list_empty() on entry does not return true after this, the entry is
  * in an undefined state.
  */
 #ifndef CONFIG_DEBUG_LIST
@@ -176,40 +111,11 @@ extern void list_del(struct list_head *entry);
 #endif
 
 /**
- * list_del_rcu - deletes entry from list without re-initialization
- * @entry: the element to delete from the list.
- *
- * Note: list_empty on entry does not return true after this,
- * the entry is in an undefined state. It is useful for RCU based
- * lockfree traversal.
- *
- * In particular, it means that we can not poison the forward
- * pointers that may still be used for walking the list.
- *
- * The caller must take whatever precautions are necessary
- * (such as holding appropriate locks) to avoid racing
- * with another list-mutation primitive, such as list_del_rcu()
- * or list_add_rcu(), running on this same list.
- * However, it is perfectly legal to run concurrently with
- * the _rcu list-traversal primitives, such as
- * list_for_each_entry_rcu().
- *
- * Note that the caller is not permitted to immediately free
- * the newly deleted entry.  Instead, either synchronize_rcu()
- * or call_rcu() must be used to defer freeing until an RCU
- * grace period has elapsed.
- */
-static inline void list_del_rcu(struct list_head *entry)
-{
-	__list_del(entry->prev, entry->next);
-	entry->prev = LIST_POISON2;
-}
-
-/**
  * list_replace - replace old entry by new one
  * @old : the element to be replaced
  * @new : the new element to insert
- * Note: if 'old' was empty, it will be overwritten.
+ *
+ * If @old was empty, it will be overwritten.
  */
 static inline void list_replace(struct list_head *old,
 				struct list_head *new)
@@ -228,25 +134,6 @@ static inline void list_replace_init(struct list_head *old,
 }
 
 /**
- * list_replace_rcu - replace old entry by new one
- * @old : the element to be replaced
- * @new : the new element to insert
- *
- * The @old entry will be replaced with the @new entry atomically.
- * Note: @old should not be empty.
- */
-static inline void list_replace_rcu(struct list_head *old,
-				struct list_head *new)
-{
-	new->next = old->next;
-	new->prev = old->prev;
-	smp_wmb();
-	new->next->prev = new;
-	new->prev->next = new;
-	old->prev = LIST_POISON2;
-}
-
-/**
  * list_del_init - deletes entry from list and reinitialize it.
  * @entry: the element to delete from the list.
  */
@@ -263,8 +150,8 @@ static inline void list_del_init(struct list_head *entry)
  */
 static inline void list_move(struct list_head *list, struct list_head *head)
 {
-        __list_del(list->prev, list->next);
-        list_add(list, head);
+	__list_del(list->prev, list->next);
+	list_add(list, head);
 }
 
 /**
@@ -275,8 +162,8 @@ static inline void list_move(struct list_head *list, struct list_head *head)
 static inline void list_move_tail(struct list_head *list,
 				  struct list_head *head)
 {
-        __list_del(list->prev, list->next);
-        list_add_tail(list, head);
+	__list_del(list->prev, list->next);
+	list_add_tail(list, head);
 }
 
 /**
@@ -318,29 +205,91 @@ static inline int list_empty_careful(const struct list_head *head)
 	return (next == head) && (next == head->prev);
 }
 
-static inline void __list_splice(struct list_head *list,
-				 struct list_head *head)
+/**
+ * list_is_singular - tests whether a list has just one entry.
+ * @head: the list to test.
+ */
+static inline int list_is_singular(const struct list_head *head)
+{
+	return !list_empty(head) && (head->next == head->prev);
+}
+
+static inline void __list_cut_position(struct list_head *list,
+		struct list_head *head, struct list_head *entry)
+{
+	struct list_head *new_first = entry->next;
+	list->next = head->next;
+	list->next->prev = list;
+	list->prev = entry;
+	entry->next = list;
+	head->next = new_first;
+	new_first->prev = head;
+}
+
+/**
+ * list_cut_position - cut a list into two
+ * @list: a new list to add all removed entries
+ * @head: a list with entries
+ * @entry: an entry within head, could be the head itself
+ *	and if so we won't cut the list
+ *
+ * This helper moves the initial part of @head, up to and
+ * including @entry, from @head to @list. You should
+ * pass on @entry an element you know is on @head. @list
+ * should be an empty list or a list you do not care about
+ * losing its data.
+ *
+ */
+static inline void list_cut_position(struct list_head *list,
+		struct list_head *head, struct list_head *entry)
+{
+	if (list_empty(head))
+		return;
+	if (list_is_singular(head) &&
+		(head->next != entry && head != entry))
+		return;
+	if (entry == head)
+		INIT_LIST_HEAD(list);
+	else
+		__list_cut_position(list, head, entry);
+}
+
+static inline void __list_splice(const struct list_head *list,
+				 struct list_head *prev,
+				 struct list_head *next)
 {
 	struct list_head *first = list->next;
 	struct list_head *last = list->prev;
-	struct list_head *at = head->next;
 
-	first->prev = head;
-	head->next = first;
+	first->prev = prev;
+	prev->next = first;
 
-	last->next = at;
-	at->prev = last;
+	last->next = next;
+	next->prev = last;
 }
 
 /**
- * list_splice - join two lists
+ * list_splice - join two lists, this is designed for stacks
  * @list: the new list to add.
  * @head: the place to add it in the first list.
  */
-static inline void list_splice(struct list_head *list, struct list_head *head)
+static inline void list_splice(const struct list_head *list,
+				struct list_head *head)
 {
 	if (!list_empty(list))
-		__list_splice(list, head);
+		__list_splice(list, head, head->next);
+}
+
+/**
+ * list_splice_tail - join two lists, each list being a queue
+ * @list: the new list to add.
+ * @head: the place to add it in the first list.
+ */
+static inline void list_splice_tail(struct list_head *list,
+				struct list_head *head)
+{
+	if (!list_empty(list))
+		__list_splice(list, head->prev, head);
 }
 
 /**
@@ -354,65 +303,26 @@ static inline void list_splice_init(struct list_head *list,
 				    struct list_head *head)
 {
 	if (!list_empty(list)) {
-		__list_splice(list, head);
+		__list_splice(list, head, head->next);
 		INIT_LIST_HEAD(list);
 	}
 }
 
 /**
- * list_splice_init_rcu - splice an RCU-protected list into an existing list.
- * @list:	the RCU-protected list to splice
- * @head:	the place in the list to splice the first list into
- * @sync:	function to sync: synchronize_rcu(), synchronize_sched(), ...
- *
- * @head can be RCU-read traversed concurrently with this function.
- *
- * Note that this function blocks.
+ * list_splice_tail_init - join two lists and reinitialise the emptied list
+ * @list: the new list to add.
+ * @head: the place to add it in the first list.
  *
- * Important note: the caller must take whatever action is necessary to
- *	prevent any other updates to @head.  In principle, it is possible
- *	to modify the list as soon as sync() begins execution.
- *	If this sort of thing becomes necessary, an alternative version
- *	based on call_rcu() could be created.  But only if -really-
- *	needed -- there is no shortage of RCU API members.
+ * Each of the lists is a queue.
+ * The list at @list is reinitialised
  */
-static inline void list_splice_init_rcu(struct list_head *list,
-					struct list_head *head,
-					void (*sync)(void))
+static inline void list_splice_tail_init(struct list_head *list,
+					 struct list_head *head)
 {
-	struct list_head *first = list->next;
-	struct list_head *last = list->prev;
-	struct list_head *at = head->next;
-
-	if (list_empty(head))
-		return;
-
-	/* "first" and "last" tracking list, so initialize it. */
-
-	INIT_LIST_HEAD(list);
-
-	/*
-	 * At this point, the list body still points to the source list.
-	 * Wait for any readers to finish using the list before splicing
-	 * the list body into the new list.  Any new readers will see
-	 * an empty list.
-	 */
-
-	sync();
-
-	/*
-	 * Readers are finished with the source list, so perform splice.
-	 * The order is important if the new list is global and accessible
-	 * to concurrent RCU readers.  Note that RCU readers are not
-	 * permitted to traverse the prev pointers without excluding
-	 * this function.
-	 */
-
-	last->next = at;
-	smp_wmb();
-	head->next = first;
-	first->prev = head;
-	at->prev = last;
+	if (!list_empty(list)) {
+		__list_splice(list, head->prev, head);
+		INIT_LIST_HEAD(list);
+	}
 }
 
 /**
@@ -425,6 +335,17 @@ static inline void list_splice_init_rcu(struct list_head *list,
 	container_of(ptr, type, member)
 
 /**
+ * list_first_entry - get the first element from a list
+ * @ptr:	the list head to take the element from.
+ * @type:	the type of the struct this is embedded in.
+ * @member:	the name of the list_struct within the struct.
+ *
+ * Note, that list is expected to be not empty.
+ */
+#define list_first_entry(ptr, type, member) \
+	list_entry((ptr)->next, type, member)
+
+/**
  * list_for_each	-	iterate over a list
  * @pos:	the &struct list_head to use as a loop cursor.
  * @head:	the head for your list.
@@ -466,6 +387,17 @@ static inline void list_splice_init_rcu(struct list_head *list,
 		pos = n, n = pos->next)
 
 /**
+ * list_for_each_prev_safe - iterate over a list backwards safe against removal of list entry
+ * @pos:	the &struct list_head to use as a loop cursor.
+ * @n:		another &struct list_head to use as temporary storage
+ * @head:	the head for your list.
+ */
+#define list_for_each_prev_safe(pos, n, head) \
+	for (pos = (head)->prev, n = pos->prev; \
+	     prefetch(pos->prev), pos != (head); \
+	     pos = n, n = pos->prev)
+
+/**
  * list_for_each_entry	-	iterate over list of given type
  * @pos:	the type * to use as a loop cursor.
  * @head:	the head for your list.
@@ -488,12 +420,12 @@ static inline void list_splice_init_rcu(struct list_head *list,
 	     pos = list_entry(pos->member.prev, typeof(*pos), member))
 
 /**
- * list_prepare_entry - prepare a pos entry for use in list_for_each_entry_continue
+ * list_prepare_entry - prepare a pos entry for use in list_for_each_entry_continue()
  * @pos:	the type * to use as a start point
  * @head:	the head of the list
  * @member:	the name of the list_struct within the struct.
  *
- * Prepares a pos entry for use as a start point in list_for_each_entry_continue.
+ * Prepares a pos entry for use as a start point in list_for_each_entry_continue().
  */
 #define list_prepare_entry(pos, head, member) \
 	((pos) ? : list_entry(head, typeof(*pos), member))
@@ -513,6 +445,20 @@ static inline void list_splice_init_rcu(struct list_head *list,
 	     pos = list_entry(pos->member.next, typeof(*pos), member))
 
 /**
+ * list_for_each_entry_continue_reverse - iterate backwards from the given point
+ * @pos:	the type * to use as a loop cursor.
+ * @head:	the head for your list.
+ * @member:	the name of the list_struct within the struct.
+ *
+ * Start to iterate over list of given type backwards, continuing after
+ * the current position.
+ */
+#define list_for_each_entry_continue_reverse(pos, head, member)		\
+	for (pos = list_entry(pos->member.prev, typeof(*pos), member);	\
+	     prefetch(pos->member.prev), &pos->member != (head);	\
+	     pos = list_entry(pos->member.prev, typeof(*pos), member))
+
+/**
  * list_for_each_entry_from - iterate over list of given type from the current point
  * @pos:	the type * to use as a loop cursor.
  * @head:	the head for your list.
@@ -584,75 +530,6 @@ static inline void list_splice_init_rcu(struct list_head *list,
 	     &pos->member != (head); 					\
 	     pos = n, n = list_entry(n->member.prev, typeof(*n), member))
 
-/**
- * list_for_each_rcu	-	iterate over an rcu-protected list
- * @pos:	the &struct list_head to use as a loop cursor.
- * @head:	the head for your list.
- *
- * This list-traversal primitive may safely run concurrently with
- * the _rcu list-mutation primitives such as list_add_rcu()
- * as long as the traversal is guarded by rcu_read_lock().
- */
-#define list_for_each_rcu(pos, head) \
-	for (pos = (head)->next; \
-		prefetch(rcu_dereference(pos)->next), pos != (head); \
-        	pos = pos->next)
-
-#define __list_for_each_rcu(pos, head) \
-	for (pos = (head)->next; \
-		rcu_dereference(pos) != (head); \
-        	pos = pos->next)
-
-/**
- * list_for_each_safe_rcu
- * @pos:	the &struct list_head to use as a loop cursor.
- * @n:		another &struct list_head to use as temporary storage
- * @head:	the head for your list.
- *
- * Iterate over an rcu-protected list, safe against removal of list entry.
- *
- * This list-traversal primitive may safely run concurrently with
- * the _rcu list-mutation primitives such as list_add_rcu()
- * as long as the traversal is guarded by rcu_read_lock().
- */
-#define list_for_each_safe_rcu(pos, n, head) \
-	for (pos = (head)->next; \
-		n = rcu_dereference(pos)->next, pos != (head); \
-		pos = n)
-
-/**
- * list_for_each_entry_rcu	-	iterate over rcu list of given type
- * @pos:	the type * to use as a loop cursor.
- * @head:	the head for your list.
- * @member:	the name of the list_struct within the struct.
- *
- * This list-traversal primitive may safely run concurrently with
- * the _rcu list-mutation primitives such as list_add_rcu()
- * as long as the traversal is guarded by rcu_read_lock().
- */
-#define list_for_each_entry_rcu(pos, head, member) \
-	for (pos = list_entry((head)->next, typeof(*pos), member); \
-		prefetch(rcu_dereference(pos)->member.next), \
-			&pos->member != (head); \
-		pos = list_entry(pos->member.next, typeof(*pos), member))
-
-
-/**
- * list_for_each_continue_rcu
- * @pos:	the &struct list_head to use as a loop cursor.
- * @head:	the head for your list.
- *
- * Iterate over an rcu-protected list, continuing after current point.
- *
- * This list-traversal primitive may safely run concurrently with
- * the _rcu list-mutation primitives such as list_add_rcu()
- * as long as the traversal is guarded by rcu_read_lock().
- */
-#define list_for_each_continue_rcu(pos, head) \
-	for ((pos) = (pos)->next; \
-		prefetch(rcu_dereference((pos))->next), (pos) != (head); \
-        	(pos) = (pos)->next)
-
 /*
  * Double linked lists with a single pointer list head.
  * Mostly useful for hash tables where the two pointer list head is
@@ -703,31 +580,6 @@ static inline void hlist_del(struct hlist_node *n)
 	n->pprev = LIST_POISON2;
 }
 
-/**
- * hlist_del_rcu - deletes entry from hash list without re-initialization
- * @n: the element to delete from the hash list.
- *
- * Note: list_unhashed() on entry does not return true after this,
- * the entry is in an undefined state. It is useful for RCU based
- * lockfree traversal.
- *
- * In particular, it means that we can not poison the forward
- * pointers that may still be used for walking the hash list.
- *
- * The caller must take whatever precautions are necessary
- * (such as holding appropriate locks) to avoid racing
- * with another list-mutation primitive, such as hlist_add_head_rcu()
- * or hlist_del_rcu(), running on this same list.
- * However, it is perfectly legal to run concurrently with
- * the _rcu list-traversal primitives, such as
- * hlist_for_each_entry().
- */
-static inline void hlist_del_rcu(struct hlist_node *n)
-{
-	__hlist_del(n);
-	n->pprev = LIST_POISON2;
-}
-
 static inline void hlist_del_init(struct hlist_node *n)
 {
 	if (!hlist_unhashed(n)) {
@@ -736,27 +588,6 @@ static inline void hlist_del_init(struct hlist_node *n)
 	}
 }
 
-/**
- * hlist_replace_rcu - replace old entry by new one
- * @old : the element to be replaced
- * @new : the new element to insert
- *
- * The @old entry will be replaced with the @new entry atomically.
- */
-static inline void hlist_replace_rcu(struct hlist_node *old,
-					struct hlist_node *new)
-{
-	struct hlist_node *next = old->next;
-
-	new->next = next;
-	new->pprev = old->pprev;
-	smp_wmb();
-	if (next)
-		new->next->pprev = &new->next;
-	*new->pprev = new;
-	old->pprev = LIST_POISON2;
-}
-
 static inline void hlist_add_head(struct hlist_node *n, struct hlist_head *h)
 {
 	struct hlist_node *first = h->first;
@@ -767,38 +598,6 @@ static inline void hlist_add_head(struct hlist_node *n, struct hlist_head *h)
 	n->pprev = &h->first;
 }
 
-
-/**
- * hlist_add_head_rcu
- * @n: the element to add to the hash list.
- * @h: the list to add to.
- *
- * Description:
- * Adds the specified element to the specified hlist,
- * while permitting racing traversals.
- *
- * The caller must take whatever precautions are necessary
- * (such as holding appropriate locks) to avoid racing
- * with another list-mutation primitive, such as hlist_add_head_rcu()
- * or hlist_del_rcu(), running on this same list.
- * However, it is perfectly legal to run concurrently with
- * the _rcu list-traversal primitives, such as
- * hlist_for_each_entry_rcu(), used to prevent memory-consistency
- * problems on Alpha CPUs.  Regardless of the type of CPU, the
- * list-traversal primitive must be guarded by rcu_read_lock().
- */
-static inline void hlist_add_head_rcu(struct hlist_node *n,
-					struct hlist_head *h)
-{
-	struct hlist_node *first = h->first;
-	n->next = first;
-	n->pprev = &h->first;
-	smp_wmb();
-	if (first)
-		first->pprev = &n->next;
-	h->first = n;
-}
-
 /* next must be != NULL */
 static inline void hlist_add_before(struct hlist_node *n,
 					struct hlist_node *next)
@@ -820,61 +619,17 @@ static inline void hlist_add_after(struct hlist_node *n,
 		next->next->pprev  = &next->next;
 }
 
-/**
- * hlist_add_before_rcu
- * @n: the new element to add to the hash list.
- * @next: the existing element to add the new element before.
- *
- * Description:
- * Adds the specified element to the specified hlist
- * before the specified node while permitting racing traversals.
- *
- * The caller must take whatever precautions are necessary
- * (such as holding appropriate locks) to avoid racing
- * with another list-mutation primitive, such as hlist_add_head_rcu()
- * or hlist_del_rcu(), running on this same list.
- * However, it is perfectly legal to run concurrently with
- * the _rcu list-traversal primitives, such as
- * hlist_for_each_entry_rcu(), used to prevent memory-consistency
- * problems on Alpha CPUs.
- */
-static inline void hlist_add_before_rcu(struct hlist_node *n,
-					struct hlist_node *next)
+/*
+ * Move a list from one list head to another. Fixup the pprev
+ * reference of the first entry if it exists.
+ */
+static inline void hlist_move_list(struct hlist_head *old,
+				   struct hlist_head *new)
 {
-	n->pprev = next->pprev;
-	n->next = next;
-	smp_wmb();
-	next->pprev = &n->next;
-	*(n->pprev) = n;
-}
-
-/**
- * hlist_add_after_rcu
- * @prev: the existing element to add the new element after.
- * @n: the new element to add to the hash list.
- *
- * Description:
- * Adds the specified element to the specified hlist
- * after the specified node while permitting racing traversals.
- *
- * The caller must take whatever precautions are necessary
- * (such as holding appropriate locks) to avoid racing
- * with another list-mutation primitive, such as hlist_add_head_rcu()
- * or hlist_del_rcu(), running on this same list.
- * However, it is perfectly legal to run concurrently with
- * the _rcu list-traversal primitives, such as
- * hlist_for_each_entry_rcu(), used to prevent memory-consistency
- * problems on Alpha CPUs.
- */
-static inline void hlist_add_after_rcu(struct hlist_node *prev,
-				       struct hlist_node *n)
-{
-	n->next = prev->next;
-	n->pprev = &prev->next;
-	smp_wmb();
-	prev->next = n;
-	if (n->next)
-		n->next->pprev = &n->next;
+	new->first = old->first;
+	if (new->first)
+		new->first->pprev = &new->first;
+	old->first = NULL;
 }
 
 #define hlist_entry(ptr, type, member) container_of(ptr,type,member)
@@ -937,24 +692,4 @@ static inline void hlist_add_after_rcu(struct hlist_node *prev,
 		({ tpos = hlist_entry(pos, typeof(*tpos), member); 1;}); \
 	     pos = n)
 
-/**
- * hlist_for_each_entry_rcu - iterate over rcu list of given type
- * @tpos:	the type * to use as a loop cursor.
- * @pos:	the &struct hlist_node to use as a loop cursor.
- * @head:	the head for your list.
- * @member:	the name of the hlist_node within the struct.
- *
- * This list-traversal primitive may safely run concurrently with
- * the _rcu list-mutation primitives such as hlist_add_head_rcu()
- * as long as the traversal is guarded by rcu_read_lock().
- */
-#define hlist_for_each_entry_rcu(tpos, pos, head, member)		 \
-	for (pos = (head)->first;					 \
-	     rcu_dereference(pos) && ({ prefetch(pos->next); 1;}) &&	 \
-		({ tpos = hlist_entry(pos, typeof(*tpos), member); 1;}); \
-	     pos = pos->next)
-
-#else
-#warning "don't include kernel headers in userspace"
-#endif /* __KERNEL__ */
 #endif