X-Git-Url: http://ftp.safe.ca/?a=blobdiff_plain;f=include%2Flinux%2Flibata.h;h=4fa748e9bc01c778505450d920b84b9139fdf148;hb=294440887b32c58d220fb54b73b7a58079b78f20;hp=947cf84e555d66acc7c4869fdc6595bb1141dfcb;hpb=6866e7bc83f13a1bc6de59099930e9db1ab0042f;p=safe%2Fjmp%2Flinux-2.6 diff --git a/include/linux/libata.h b/include/linux/libata.h index 947cf84..4fa748e 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -143,10 +143,10 @@ enum { ATA_DFLAG_PIO = (1 << 12), /* device limited to PIO mode */ ATA_DFLAG_NCQ_OFF = (1 << 13), /* device limited to non-NCQ mode */ - ATA_DFLAG_SPUNDOWN = (1 << 14), /* XXX: for spindown_compat */ ATA_DFLAG_SLEEPING = (1 << 15), /* device is sleeping */ ATA_DFLAG_DUBIOUS_XFER = (1 << 16), /* data transfer not verified */ ATA_DFLAG_NO_UNLOAD = (1 << 17), /* device doesn't support unload */ + ATA_DFLAG_UNLOCK_HPA = (1 << 18), /* unlock HPA */ ATA_DFLAG_INIT_MASK = (1 << 24) - 1, ATA_DFLAG_DETACH = (1 << 24), @@ -187,7 +187,10 @@ enum { ATA_FLAG_PIO_POLLING = (1 << 9), /* use polling PIO if LLD * doesn't handle PIO interrupts */ ATA_FLAG_NCQ = (1 << 10), /* host supports NCQ */ + ATA_FLAG_NO_POWEROFF_SPINDOWN = (1 << 11), /* don't spindown before poweroff */ + ATA_FLAG_NO_HIBERNATE_SPINDOWN = (1 << 12), /* don't spindown before hibernation */ ATA_FLAG_DEBUGMSG = (1 << 13), + ATA_FLAG_FPDMA_AA = (1 << 14), /* driver supports Auto-Activate */ ATA_FLAG_IGN_SIMPLEX = (1 << 15), /* ignore SIMPLEX */ ATA_FLAG_NO_IORDY = (1 << 16), /* controller lacks iordy */ ATA_FLAG_ACPI_SATA = (1 << 17), /* need native SATA ACPI layout */ @@ -207,21 +210,26 @@ enum { /* bits 24:31 of ap->flags are reserved for LLD specific flags */ + /* struct ata_port pflags */ ATA_PFLAG_EH_PENDING = (1 << 0), /* EH pending */ ATA_PFLAG_EH_IN_PROGRESS = (1 << 1), /* EH in progress */ ATA_PFLAG_FROZEN = (1 << 2), /* port is frozen */ ATA_PFLAG_RECOVERED = (1 << 3), /* recovery action performed */ ATA_PFLAG_LOADING = (1 << 4), /* boot/loading probe */ - ATA_PFLAG_UNLOADING = (1 << 5), /* module is unloading */ ATA_PFLAG_SCSI_HOTPLUG = (1 << 6), /* SCSI hotplug scheduled */ ATA_PFLAG_INITIALIZING = (1 << 7), /* being initialized, don't touch */ ATA_PFLAG_RESETTING = (1 << 8), /* reset in progress */ + ATA_PFLAG_UNLOADING = (1 << 9), /* driver is being unloaded */ + ATA_PFLAG_UNLOADED = (1 << 10), /* driver is unloaded */ ATA_PFLAG_SUSPENDED = (1 << 17), /* port is suspended (power) */ ATA_PFLAG_PM_PENDING = (1 << 18), /* PM operation pending */ ATA_PFLAG_INIT_GTM_VALID = (1 << 19), /* initial gtm data valid */ + ATA_PFLAG_PIO32 = (1 << 20), /* 32bit PIO */ + ATA_PFLAG_PIO32CHANGE = (1 << 21), /* 32bit PIO can be turned on/off */ + /* struct ata_queued_cmd flags */ ATA_QCFLAG_ACTIVE = (1 << 0), /* cmd not yet ack'd to scsi lyer */ ATA_QCFLAG_DMAMAP = (1 << 1), /* SG table is DMA mapped */ @@ -238,6 +246,7 @@ enum { /* host set flags */ ATA_HOST_SIMPLEX = (1 << 0), /* Host is simplex, one DMA channel per host only */ ATA_HOST_STARTED = (1 << 1), /* Host started */ + ATA_HOST_PARALLEL_SCAN = (1 << 2), /* Ports on this host can be scanned in parallel */ /* bits 24:31 of host->flags are reserved for LLD specific flags */ @@ -271,7 +280,7 @@ enum { * advised to wait only for the following duration before * doing SRST. */ - ATA_TMOUT_PMP_SRST_WAIT = 1000, + ATA_TMOUT_PMP_SRST_WAIT = 5000, /* ATA bus states */ BUS_UNKNOWN = 0, @@ -340,9 +349,15 @@ enum { ATA_EHI_DID_RESET = ATA_EHI_DID_SOFTRESET | ATA_EHI_DID_HARDRESET, + /* mask of flags to transfer *to* the slave link */ + ATA_EHI_TO_SLAVE_MASK = ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET, + /* max tries if error condition is still set after ->error_handler */ ATA_EH_MAX_TRIES = 5, + /* sometimes resuming a link requires several retries */ + ATA_LINK_RESUME_TRIES = 5, + /* how hard are we gonna try to probe/recover devices */ ATA_PROBE_MAX_TRIES = 3, ATA_EH_DEV_TRIES = 3, @@ -354,7 +369,7 @@ enum { /* This should match the actual table size of * ata_eh_cmd_timeout_table in libata-eh.c. */ - ATA_EH_CMD_TIMEOUT_TABLE_SIZE = 5, + ATA_EH_CMD_TIMEOUT_TABLE_SIZE = 6, /* Horkage types. May be set by libata or controller on drives (some horkage may be drive/controller pair dependant */ @@ -369,6 +384,13 @@ enum { ATA_HORKAGE_IPM = (1 << 7), /* Link PM problems */ ATA_HORKAGE_IVB = (1 << 8), /* cbl det validity bit bugs */ ATA_HORKAGE_STUCK_ERR = (1 << 9), /* stuck ERR on next PACKET */ + ATA_HORKAGE_BRIDGE_OK = (1 << 10), /* no bridge limits */ + ATA_HORKAGE_ATAPI_MOD16_DMA = (1 << 11), /* use ATAPI DMA for commands + not multiple of 16 bytes */ + ATA_HORKAGE_FIRMWARE_WARN = (1 << 12), /* firmware update warning */ + ATA_HORKAGE_1_5_GBPS = (1 << 13), /* force 1.5 Gbps */ + ATA_HORKAGE_NOSETXFER = (1 << 14), /* skip SETXFER, SATA only */ + ATA_HORKAGE_BROKEN_FPDMA_AA = (1 << 15), /* skip AA */ /* DMA mask for user DMA control: User visible values; DO NOT renumber */ @@ -392,12 +414,25 @@ enum { ATA_TIMING_CYC8B, ATA_TIMING_ACTIVE = (1 << 4), ATA_TIMING_RECOVER = (1 << 5), - ATA_TIMING_CYCLE = (1 << 6), - ATA_TIMING_UDMA = (1 << 7), + ATA_TIMING_DMACK_HOLD = (1 << 6), + ATA_TIMING_CYCLE = (1 << 7), + ATA_TIMING_UDMA = (1 << 8), ATA_TIMING_ALL = ATA_TIMING_SETUP | ATA_TIMING_ACT8B | ATA_TIMING_REC8B | ATA_TIMING_CYC8B | ATA_TIMING_ACTIVE | ATA_TIMING_RECOVER | - ATA_TIMING_CYCLE | ATA_TIMING_UDMA, + ATA_TIMING_DMACK_HOLD | ATA_TIMING_CYCLE | + ATA_TIMING_UDMA, + + /* ACPI constants */ + ATA_ACPI_FILTER_SETXFER = 1 << 0, + ATA_ACPI_FILTER_LOCK = 1 << 1, + ATA_ACPI_FILTER_DIPM = 1 << 2, + ATA_ACPI_FILTER_FPDMA_OFFSET = 1 << 3, /* FPDMA non-zero offset */ + ATA_ACPI_FILTER_FPDMA_AA = 1 << 4, /* FPDMA auto activate */ + + ATA_ACPI_FILTER_DEFAULT = ATA_ACPI_FILTER_SETXFER | + ATA_ACPI_FILTER_LOCK | + ATA_ACPI_FILTER_DIPM, }; enum ata_xfer_mask { @@ -516,6 +551,7 @@ struct ata_queued_cmd { unsigned long flags; /* ATA_QCFLAG_xxx */ unsigned int tag; unsigned int n_elem; + unsigned int orig_n_elem; int dma_dir; @@ -563,12 +599,15 @@ struct ata_device { unsigned int horkage; /* List of broken features */ unsigned long flags; /* ATA_DFLAG_xxx */ struct scsi_device *sdev; /* attached SCSI device */ + void *private_data; #ifdef CONFIG_ATA_ACPI acpi_handle acpi_handle; union acpi_object *gtf_cache; + unsigned int gtf_filter; #endif - /* n_sector is used as CLEAR_OFFSET, read comment above CLEAR_OFFSET */ + /* n_sector is CLEAR_BEGIN, read comment above CLEAR_BEGIN */ u64 n_sectors; /* size of device, if ATA */ + u64 n_native_sectors; /* native size, if ATA */ unsigned int class; /* ATA_DEV_xxx */ unsigned long unpark_deadline; @@ -592,20 +631,22 @@ struct ata_device { u16 heads; /* Number of heads */ u16 sectors; /* Number of sectors per track */ - /* error history */ - int spdn_cnt; - struct ata_ering ering; - union { u16 id[ATA_ID_WORDS]; /* IDENTIFY xxx DEVICE data */ u32 gscr[SATA_PMP_GSCR_DWORDS]; /* PMP GSCR block */ }; + + /* error history */ + int spdn_cnt; + /* ering is CLEAR_END, read comment above CLEAR_END */ + struct ata_ering ering; }; -/* Offset into struct ata_device. Fields above it are maintained - * acress device init. Fields below are zeroed. +/* Fields between ATA_DEVICE_CLEAR_BEGIN and ATA_DEVICE_CLEAR_END are + * cleared to zero on ata_dev_init(). */ -#define ATA_DEVICE_CLEAR_OFFSET offsetof(struct ata_device, n_sectors) +#define ATA_DEVICE_CLEAR_BEGIN offsetof(struct ata_device, n_sectors) +#define ATA_DEVICE_CLEAR_END offsetof(struct ata_device, ering) struct ata_eh_info { struct ata_device *dev; /* offending device */ @@ -672,7 +713,10 @@ struct ata_port { struct Scsi_Host *scsi_host; /* our co-allocated scsi host */ struct ata_port_operations *ops; spinlock_t *lock; + /* Flags owned by the EH context. Only EH should touch these once the + port is active */ unsigned long flags; /* ATA_FLAG_xxx */ + /* Flags that change dynamically, protected by ap->lock */ unsigned int pflags; /* ATA_PFLAG_xxx */ unsigned int print_id; /* user visible unique port ID */ unsigned int port_no; /* 0 based port no. inside the host */ @@ -734,7 +778,8 @@ struct ata_port { acpi_handle acpi_handle; struct ata_acpi_gtm __acpi_init_gtm; /* use ata_acpi_init_gtm() */ #endif - u8 sector_buf[ATA_SECT_SIZE]; /* owned by EH */ + /* owned by EH */ + u8 sector_buf[ATA_SECT_SIZE] ____cacheline_aligned; }; /* The following initializer overrides a method to NULL whether one of @@ -777,6 +822,7 @@ struct ata_port_operations { ata_reset_fn_t pmp_hardreset; ata_postreset_fn_t pmp_postreset; void (*error_handler)(struct ata_port *ap); + void (*lost_interrupt)(struct ata_port *ap); void (*post_internal_cmd)(struct ata_queued_cmd *qc); /* @@ -812,12 +858,15 @@ struct ata_port_operations { unsigned int (*sff_data_xfer)(struct ata_device *dev, unsigned char *buf, unsigned int buflen, int rw); u8 (*sff_irq_on)(struct ata_port *); + bool (*sff_irq_check)(struct ata_port *); void (*sff_irq_clear)(struct ata_port *); void (*bmdma_setup)(struct ata_queued_cmd *qc); void (*bmdma_start)(struct ata_queued_cmd *qc); void (*bmdma_stop)(struct ata_queued_cmd *qc); u8 (*bmdma_status)(struct ata_port *ap); + + void (*drain_fifo)(struct ata_queued_cmd *qc); #endif /* CONFIG_ATA_SFF */ ssize_t (*em_show)(struct ata_port *ap, char *buf); @@ -857,6 +906,7 @@ struct ata_timing { unsigned short cyc8b; /* t0 for 8-bit I/O */ unsigned short active; /* t2 or tD */ unsigned short recover; /* t2i or tK */ + unsigned short dmack_hold; /* tj */ unsigned short cycle; /* t0 */ unsigned short udma; /* t2CYCTYP/2 */ }; @@ -918,6 +968,8 @@ extern void ata_host_init(struct ata_host *, struct device *, extern int ata_scsi_detect(struct scsi_host_template *sht); extern int ata_scsi_ioctl(struct scsi_device *dev, int cmd, void __user *arg); extern int ata_scsi_queuecmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *)); +extern int ata_sas_scsi_ioctl(struct ata_port *ap, struct scsi_device *dev, + int cmd, void __user *arg); extern void ata_sas_port_destroy(struct ata_port *); extern struct ata_port *ata_sas_port_alloc(struct ata_host *, struct ata_port_info *, struct Scsi_Host *); @@ -977,7 +1029,7 @@ extern int ata_std_bios_param(struct scsi_device *sdev, extern int ata_scsi_slave_config(struct scsi_device *sdev); extern void ata_scsi_slave_destroy(struct scsi_device *sdev); extern int ata_scsi_change_queue_depth(struct scsi_device *sdev, - int queue_depth); + int queue_depth, int reason); extern struct ata_device *ata_dev_pair(struct ata_device *adev); extern int ata_do_set_mode(struct ata_link *link, struct ata_device **r_failed_dev); @@ -987,6 +1039,9 @@ extern int ata_cable_sata(struct ata_port *ap); extern int ata_cable_ignore(struct ata_port *ap); extern int ata_cable_unknown(struct ata_port *ap); +extern void ata_pio_queue_task(struct ata_port *ap, void *data, + unsigned long delay); + /* Timing helpers */ extern unsigned int ata_pio_need_iordy(const struct ata_device *); extern const struct ata_timing *ata_timing_find_mode(u8 xfer_mode); @@ -1278,26 +1333,62 @@ static inline int ata_link_active(struct ata_link *link) return ata_tag_valid(link->active_tag) || link->sactive; } -extern struct ata_link *__ata_port_next_link(struct ata_port *ap, - struct ata_link *link, - bool dev_only); +/* + * Iterators + * + * ATA_LITER_* constants are used to select link iteration mode and + * ATA_DITER_* device iteration mode. + * + * For a custom iteration directly using ata_{link|dev}_next(), if + * @link or @dev, respectively, is NULL, the first element is + * returned. @dev and @link can be any valid device or link and the + * next element according to the iteration mode will be returned. + * After the last element, NULL is returned. + */ +enum ata_link_iter_mode { + ATA_LITER_EDGE, /* if present, PMP links only; otherwise, + * host link. no slave link */ + ATA_LITER_HOST_FIRST, /* host link followed by PMP or slave links */ + ATA_LITER_PMP_FIRST, /* PMP links followed by host link, + * slave link still comes after host link */ +}; -#define __ata_port_for_each_link(link, ap) \ - for ((link) = __ata_port_next_link((ap), NULL, false); (link); \ - (link) = __ata_port_next_link((ap), (link), false)) +enum ata_dev_iter_mode { + ATA_DITER_ENABLED, + ATA_DITER_ENABLED_REVERSE, + ATA_DITER_ALL, + ATA_DITER_ALL_REVERSE, +}; -#define ata_port_for_each_link(link, ap) \ - for ((link) = __ata_port_next_link((ap), NULL, true); (link); \ - (link) = __ata_port_next_link((ap), (link), true)) +extern struct ata_link *ata_link_next(struct ata_link *link, + struct ata_port *ap, + enum ata_link_iter_mode mode); -#define ata_link_for_each_dev(dev, link) \ - for ((dev) = (link)->device; \ - (dev) < (link)->device + ata_link_max_devices(link) || ((dev) = NULL); \ - (dev)++) +extern struct ata_device *ata_dev_next(struct ata_device *dev, + struct ata_link *link, + enum ata_dev_iter_mode mode); -#define ata_link_for_each_dev_reverse(dev, link) \ - for ((dev) = (link)->device + ata_link_max_devices(link) - 1; \ - (dev) >= (link)->device || ((dev) = NULL); (dev)--) +/* + * Shortcut notation for iterations + * + * ata_for_each_link() iterates over each link of @ap according to + * @mode. @link points to the current link in the loop. @link is + * NULL after loop termination. ata_for_each_dev() works the same way + * except that it iterates over each device of @link. + * + * Note that the mode prefixes ATA_{L|D}ITER_ shouldn't need to be + * specified when using the following shorthand notations. Only the + * mode itself (EDGE, HOST_FIRST, ENABLED, etc...) should be + * specified. This not only increases brevity but also makes it + * impossible to use ATA_LITER_* for device iteration or vice-versa. + */ +#define ata_for_each_link(link, ap, mode) \ + for ((link) = ata_link_next(NULL, (ap), ATA_LITER_##mode); (link); \ + (link) = ata_link_next((link), (ap), ATA_LITER_##mode)) + +#define ata_for_each_dev(dev, link, mode) \ + for ((dev) = ata_dev_next(NULL, (link), ATA_DITER_##mode); (dev); \ + (dev) = ata_dev_next((dev), (link), ATA_DITER_##mode)) /** * ata_ncq_enabled - Test whether NCQ is enabled @@ -1474,6 +1565,7 @@ extern void sata_pmp_error_handler(struct ata_port *ap); extern const struct ata_port_operations ata_sff_port_ops; extern const struct ata_port_operations ata_bmdma_port_ops; +extern const struct ata_port_operations ata_bmdma32_port_ops; /* PIO only, sg_tablesize and dma_boundary limits can be removed */ #define ATA_PIO_SHT(drv_name) \ @@ -1501,6 +1593,8 @@ extern void ata_sff_exec_command(struct ata_port *ap, const struct ata_taskfile *tf); extern unsigned int ata_sff_data_xfer(struct ata_device *dev, unsigned char *buf, unsigned int buflen, int rw); +extern unsigned int ata_sff_data_xfer32(struct ata_device *dev, + unsigned char *buf, unsigned int buflen, int rw); extern unsigned int ata_sff_data_xfer_noirq(struct ata_device *dev, unsigned char *buf, unsigned int buflen, int rw); extern u8 ata_sff_irq_on(struct ata_port *ap); @@ -1512,6 +1606,7 @@ extern bool ata_sff_qc_fill_rtf(struct ata_queued_cmd *qc); extern unsigned int ata_sff_host_intr(struct ata_port *ap, struct ata_queued_cmd *qc); extern irqreturn_t ata_sff_interrupt(int irq, void *dev_instance); +extern void ata_sff_lost_interrupt(struct ata_port *ap); extern void ata_sff_freeze(struct ata_port *ap); extern void ata_sff_thaw(struct ata_port *ap); extern int ata_sff_prereset(struct ata_link *link, unsigned long deadline); @@ -1524,9 +1619,11 @@ extern int ata_sff_softreset(struct ata_link *link, unsigned int *classes, extern int sata_sff_hardreset(struct ata_link *link, unsigned int *class, unsigned long deadline); extern void ata_sff_postreset(struct ata_link *link, unsigned int *classes); +extern void ata_sff_drain_fifo(struct ata_queued_cmd *qc); extern void ata_sff_error_handler(struct ata_port *ap); extern void ata_sff_post_internal_cmd(struct ata_queued_cmd *qc); extern int ata_sff_port_start(struct ata_port *ap); +extern int ata_sff_port_start32(struct ata_port *ap); extern void ata_sff_std_ports(struct ata_ioports *ioaddr); extern unsigned long ata_bmdma_mode_filter(struct ata_device *dev, unsigned long xfer_mask); @@ -1534,7 +1631,6 @@ extern void ata_bmdma_setup(struct ata_queued_cmd *qc); extern void ata_bmdma_start(struct ata_queued_cmd *qc); extern void ata_bmdma_stop(struct ata_queued_cmd *qc); extern u8 ata_bmdma_status(struct ata_port *ap); -extern void ata_bus_reset(struct ata_port *ap); #ifdef CONFIG_PCI extern int ata_pci_bmdma_clear_simplex(struct pci_dev *pdev); @@ -1547,8 +1643,8 @@ extern int ata_pci_sff_activate_host(struct ata_host *host, irq_handler_t irq_handler, struct scsi_host_template *sht); extern int ata_pci_sff_init_one(struct pci_dev *pdev, - const struct ata_port_info * const * ppi, - struct scsi_host_template *sht, void *host_priv); + const struct ata_port_info * const * ppi, + struct scsi_host_template *sht, void *host_priv, int hflags); #endif /* CONFIG_PCI */ /**