X-Git-Url: http://ftp.safe.ca/?a=blobdiff_plain;f=include%2Flinux%2Finit.h;h=332806826b8e0740daaade5283dd6c3df422948c;hb=1f3fcd4b1adc972d5c6a34cfed98931c46575b49;hp=ed0ac7c39fdc49bc83c9db2dc885d1ec63046873;hpb=77d47582c2345e071df02afaf9191641009287c4;p=safe%2Fjmp%2Flinux-2.6

diff --git a/include/linux/init.h b/include/linux/init.h
index ed0ac7c..3328068 100644
--- a/include/linux/init.h
+++ b/include/linux/init.h
@@ -1,7 +1,6 @@
 #ifndef _LINUX_INIT_H
 #define _LINUX_INIT_H
 
-#include <linux/config.h>
 #include <linux/compiler.h>
 
 /* These macros are used to mark some functions or 
@@ -41,21 +40,93 @@
 
 /* These are for everybody (although not all archs will actually
    discard it in modules) */
-#define __init		__attribute__ ((__section__ (".init.text")))
-#define __initdata	__attribute__ ((__section__ (".init.data")))
-#define __exitdata	__attribute__ ((__section__(".exit.data")))
-#define __exit_call	__attribute_used__ __attribute__ ((__section__ (".exitcall.exit")))
+#define __init		__section(.init.text) __cold
+#define __initdata	__section(.init.data)
+#define __initconst	__section(.init.rodata)
+#define __exitdata	__section(.exit.data)
+#define __exit_call	__used __section(.exitcall.exit)
+
+/* modpost check for section mismatches during the kernel build.
+ * A section mismatch happens when there are references from a
+ * code or data section to an init section (both code or data).
+ * The init sections are (for most archs) discarded by the kernel
+ * when early init has completed so all such references are potential bugs.
+ * For exit sections the same issue exists.
+ * The following markers are used for the cases where the reference to
+ * the *init / *exit section (code or data) is valid and will teach
+ * modpost not to issue a warning.
+ * The markers follow same syntax rules as __init / __initdata. */
+#define __ref            __section(.ref.text) noinline
+#define __refdata        __section(.ref.data)
+#define __refconst       __section(.ref.rodata)
+
+/* backward compatibility note
+ *  A few places hardcode the old section names:
+ *  .text.init.refok
+ *  .data.init.refok
+ *  .exit.text.refok
+ *  They should be converted to use the defines from this file
+ */
+
+/* compatibility defines */
+#define __init_refok     __ref
+#define __initdata_refok __refdata
+#define __exit_refok     __ref
+
 
 #ifdef MODULE
-#define __exit		__attribute__ ((__section__(".exit.text")))
+#define __exitused
 #else
-#define __exit		__attribute_used__ __attribute__ ((__section__(".exit.text")))
+#define __exitused  __used
 #endif
 
+#define __exit          __section(.exit.text) __exitused __cold
+
+/* Used for HOTPLUG */
+#define __devinit        __section(.devinit.text) __cold
+#define __devinitdata    __section(.devinit.data)
+#define __devinitconst   __section(.devinit.rodata)
+#define __devexit        __section(.devexit.text) __exitused __cold
+#define __devexitdata    __section(.devexit.data)
+#define __devexitconst   __section(.devexit.rodata)
+
+/* Used for HOTPLUG_CPU */
+#define __cpuinit        __section(.cpuinit.text) __cold
+#define __cpuinitdata    __section(.cpuinit.data)
+#define __cpuinitconst   __section(.cpuinit.rodata)
+#define __cpuexit        __section(.cpuexit.text) __exitused __cold
+#define __cpuexitdata    __section(.cpuexit.data)
+#define __cpuexitconst   __section(.cpuexit.rodata)
+
+/* Used for MEMORY_HOTPLUG */
+#define __meminit        __section(.meminit.text) __cold
+#define __meminitdata    __section(.meminit.data)
+#define __meminitconst   __section(.meminit.rodata)
+#define __memexit        __section(.memexit.text) __exitused __cold
+#define __memexitdata    __section(.memexit.data)
+#define __memexitconst   __section(.memexit.rodata)
+
 /* For assembly routines */
+#define __HEAD		.section	".head.text","ax"
 #define __INIT		.section	".init.text","ax"
 #define __FINIT		.previous
+
 #define __INITDATA	.section	".init.data","aw"
+#define __FINITDATA	.previous
+
+#define __DEVINIT        .section	".devinit.text", "ax"
+#define __DEVINITDATA    .section	".devinit.data", "aw"
+
+#define __CPUINIT        .section	".cpuinit.text", "ax"
+#define __CPUINITDATA    .section	".cpuinit.data", "aw"
+
+#define __MEMINIT        .section	".meminit.text", "ax"
+#define __MEMINITDATA    .section	".meminit.data", "aw"
+
+/* silence warnings when references are OK */
+#define __REF            .section       ".ref.text", "ax"
+#define __REFDATA        .section       ".ref.data", "aw"
+#define __REFCONST       .section       ".ref.rodata", "aw"
 
 #ifndef __ASSEMBLY__
 /*
@@ -68,10 +139,16 @@ extern initcall_t __con_initcall_start[], __con_initcall_end[];
 extern initcall_t __security_initcall_start[], __security_initcall_end[];
 
 /* Defined in init/main.c */
-extern char saved_command_line[];
+extern int do_one_initcall(initcall_t fn);
+extern char __initdata boot_command_line[];
+extern char *saved_command_line;
+extern unsigned int reset_devices;
 
 /* used by init/main.c */
-extern void setup_arch(char **);
+void setup_arch(char **);
+void prepare_namespace(void);
+
+extern void (*late_time_init)(void);
 
 #endif
   
@@ -84,19 +161,45 @@ extern void setup_arch(char **);
  * by link order. 
  * For backwards compatibility, initcall() puts the call in 
  * the device init subsection.
+ *
+ * The `id' arg to __define_initcall() is needed so that multiple initcalls
+ * can point at the same handler without causing duplicate-symbol build errors.
  */
 
-#define __define_initcall(level,fn) \
-	static initcall_t __initcall_##fn __attribute_used__ \
+#define __define_initcall(level,fn,id) \
+	static initcall_t __initcall_##fn##id __used \
 	__attribute__((__section__(".initcall" level ".init"))) = fn
 
-#define core_initcall(fn)		__define_initcall("1",fn)
-#define postcore_initcall(fn)		__define_initcall("2",fn)
-#define arch_initcall(fn)		__define_initcall("3",fn)
-#define subsys_initcall(fn)		__define_initcall("4",fn)
-#define fs_initcall(fn)			__define_initcall("5",fn)
-#define device_initcall(fn)		__define_initcall("6",fn)
-#define late_initcall(fn)		__define_initcall("7",fn)
+/*
+ * Early initcalls run before initializing SMP.
+ *
+ * Only for built-in code, not modules.
+ */
+#define early_initcall(fn)		__define_initcall("early",fn,early)
+
+/*
+ * A "pure" initcall has no dependencies on anything else, and purely
+ * initializes variables that couldn't be statically initialized.
+ *
+ * This only exists for built-in code, not for modules.
+ */
+#define pure_initcall(fn)		__define_initcall("0",fn,0)
+
+#define core_initcall(fn)		__define_initcall("1",fn,1)
+#define core_initcall_sync(fn)		__define_initcall("1s",fn,1s)
+#define postcore_initcall(fn)		__define_initcall("2",fn,2)
+#define postcore_initcall_sync(fn)	__define_initcall("2s",fn,2s)
+#define arch_initcall(fn)		__define_initcall("3",fn,3)
+#define arch_initcall_sync(fn)		__define_initcall("3s",fn,3s)
+#define subsys_initcall(fn)		__define_initcall("4",fn,4)
+#define subsys_initcall_sync(fn)	__define_initcall("4s",fn,4s)
+#define fs_initcall(fn)			__define_initcall("5",fn,5)
+#define fs_initcall_sync(fn)		__define_initcall("5s",fn,5s)
+#define rootfs_initcall(fn)		__define_initcall("rootfs",fn,rootfs)
+#define device_initcall(fn)		__define_initcall("6",fn,6)
+#define device_initcall_sync(fn)	__define_initcall("6s",fn,6s)
+#define late_initcall(fn)		__define_initcall("7",fn,7)
+#define late_initcall_sync(fn)		__define_initcall("7s",fn,7s)
 
 #define __initcall(fn) device_initcall(fn)
 
@@ -105,11 +208,11 @@ extern void setup_arch(char **);
 
 #define console_initcall(fn) \
 	static initcall_t __initcall_##fn \
-	__attribute_used__ __attribute__((__section__(".con_initcall.init")))=fn
+	__used __section(.con_initcall.init) = fn
 
 #define security_initcall(fn) \
 	static initcall_t __initcall_##fn \
-	__attribute_used__ __attribute__((__section__(".security_initcall.init"))) = fn
+	__used __section(.security_initcall.init) = fn
 
 struct obs_kernel_param {
 	const char *str;
@@ -124,10 +227,9 @@ struct obs_kernel_param {
  * obs_kernel_param "array" too far apart in .init.setup.
  */
 #define __setup_param(str, unique_id, fn, early)			\
-	static char __setup_str_##unique_id[] __initdata = str;	\
+	static char __setup_str_##unique_id[] __initdata __aligned(1) = str; \
 	static struct obs_kernel_param __setup_##unique_id	\
-		__attribute_used__				\
-		__attribute__((__section__(".init.setup")))	\
+		__used __section(.init.setup)			\
 		__attribute__((aligned((sizeof(long)))))	\
 		= { __setup_str_##unique_id, fn, early }
 
@@ -137,23 +239,64 @@ struct obs_kernel_param {
 #define __setup(str, fn)					\
 	__setup_param(str, fn, fn, 0)
 
-#define __obsolete_setup(str)					\
-	__setup_null_param(str, __LINE__)
-
 /* NOTE: fn is as per module_param, not __setup!  Emits warning if fn
  * returns non-zero. */
 #define early_param(str, fn)					\
 	__setup_param(str, fn, fn, 1)
 
-/* Relies on saved_command_line being set */
+/* Relies on boot_command_line being set */
 void __init parse_early_param(void);
+
+struct dyn_array {
+	void **name;
+	unsigned long size;
+	unsigned int *nr;
+	unsigned long align;
+	void (*init_work)(void *);
+};
+extern struct dyn_array *__dyn_array_start[], *__dyn_array_end[];
+extern struct dyn_array *__per_cpu_dyn_array_start[], *__per_cpu_dyn_array_end[];
+
+#define DEFINE_DYN_ARRAY_ADDR(nameX, addrX, sizeX, nrX, alignX, init_workX) \
+		static struct dyn_array __dyn_array_##nameX __initdata = \
+		{	.name = (void **)&(nameX),\
+			.size = sizeX,\
+			.nr   = &(nrX),\
+			.align = alignX,\
+			.init_work = init_workX,\
+		}; \
+		static struct dyn_array *__dyn_array_ptr_##nameX __used \
+		__attribute__((__section__(".dyn_array.init"))) = \
+			&__dyn_array_##nameX
+
+#define DEFINE_DYN_ARRAY(nameX, sizeX, nrX, alignX, init_workX) \
+	DEFINE_DYN_ARRAY_ADDR(nameX, nameX, sizeX, nrX, alignX, init_workX)
+
+#define DEFINE_PER_CPU_DYN_ARRAY_ADDR(nameX, addrX, sizeX, nrX, alignX, init_workX) \
+		static struct dyn_array __per_cpu_dyn_array_##nameX __initdata = \
+		{	.name = (void **)&(addrX),\
+			.size = sizeX,\
+			.nr   = &(nrX),\
+			.align = alignX,\
+			.init_work = init_workX,\
+		}; \
+		static struct dyn_array *__per_cpu_dyn_array_ptr_##nameX __used \
+		__attribute__((__section__(".per_cpu_dyn_array.init"))) = \
+			&__per_cpu_dyn_array_##nameX
+
+#define DEFINE_PER_CPU_DYN_ARRAY(nameX, sizeX, nrX, alignX, init_workX) \
+	DEFINE_PER_CPU_DYN_ARRAY_ADDR(nameX, nameX, nrX, alignX, init_workX)
+
+extern void pre_alloc_dyn_array(void);
+extern unsigned long per_cpu_dyn_array_size(void);
+extern void per_cpu_alloc_dyn_array(int cpu, char *ptr);
 #endif /* __ASSEMBLY__ */
 
 /**
  * module_init() - driver initialization entry point
  * @x: function to be run at kernel boot time or module insertion
  * 
- * module_init() will either be called during do_initcalls (if
+ * module_init() will either be called during do_initcalls() (if
  * builtin) or at module insertion time (if a module).  There can only
  * be one per module.
  */
@@ -184,13 +327,7 @@ void __init parse_early_param(void);
 
 #define security_initcall(fn)		module_init(fn)
 
-/* These macros create a dummy inline: gcc 2.9x does not count alias
- as usage, hence the `unused function' warning when __init functions
- are declared static. We use the dummy __*_module_inline functions
- both to kill the warning and check the type of the init/cleanup
- function. */
-
-/* Each module must use one module_init(), or one no_module_init */
+/* Each module must use one module_init(). */
 #define module_init(initfn)					\
 	static inline initcall_t __inittest(void)		\
 	{ return initfn; }					\
@@ -205,11 +342,10 @@ void __init parse_early_param(void);
 #define __setup_param(str, unique_id, fn)	/* nothing */
 #define __setup_null_param(str, unique_id) 	/* nothing */
 #define __setup(str, func) 			/* nothing */
-#define __obsolete_setup(str) 			/* nothing */
 #endif
 
-/* Data marked not to be saved by software_suspend() */
-#define __nosavedata __attribute__ ((__section__ (".data.nosave")))
+/* Data marked not to be saved by software suspend */
+#define __nosavedata __section(.data.nosave)
 
 /* This means "can be init if no module support, otherwise module load
    may call it." */
@@ -221,42 +357,6 @@ void __init parse_early_param(void);
 #define __initdata_or_module __initdata
 #endif /*CONFIG_MODULES*/
 
-#ifdef CONFIG_HOTPLUG
-#define __devinit
-#define __devinitdata
-#define __devexit
-#define __devexitdata
-#else
-#define __devinit __init
-#define __devinitdata __initdata
-#define __devexit __exit
-#define __devexitdata __exitdata
-#endif
-
-#ifdef CONFIG_HOTPLUG_CPU
-#define __cpuinit
-#define __cpuinitdata
-#define __cpuexit
-#define __cpuexitdata
-#else
-#define __cpuinit	__init
-#define __cpuinitdata __initdata
-#define __cpuexit __exit
-#define __cpuexitdata	__exitdata
-#endif
-
-#ifdef CONFIG_MEMORY_HOTPLUG
-#define __meminit
-#define __meminitdata
-#define __memexit
-#define __memexitdata
-#else
-#define __meminit	__init
-#define __meminitdata __initdata
-#define __memexit __exit
-#define __memexitdata	__exitdata
-#endif
-
 /* Functions marked as __devexit may be discarded at kernel link time, depending
    on config options.  Newer versions of binutils detect references from
    retained sections to discarded sections and flag an error.  Pointers to