X-Git-Url: http://ftp.safe.ca/?a=blobdiff_plain;f=include%2Flinux%2Fif.h;h=b9a6229f3be7751d58ea43bc938da8afecfc42b0;hb=ac481c20ef8f6c6f2be75d581863f40c43874ef7;hp=d73a9d62f208a7a2ad3fb9fd01c2800c4dade0da;hpb=02c30a84e6298b6b20a56f0896ac80b47839e134;p=safe%2Fjmp%2Flinux-2.6

diff --git a/include/linux/if.h b/include/linux/if.h
index d73a9d6..b9a6229 100644
--- a/include/linux/if.h
+++ b/include/linux/if.h
@@ -24,6 +24,7 @@
 #include <linux/compiler.h>		/* for "__user" et al           */
 
 #define	IFNAMSIZ	16
+#define	IFALIASZ	256
 #include <linux/hdlc/ioctl.h>
 
 /* Standard interface flags (netdevice->flags). */
@@ -33,7 +34,7 @@
 #define	IFF_LOOPBACK	0x8		/* is a loopback net		*/
 #define	IFF_POINTOPOINT	0x10		/* interface is has p-p link	*/
 #define	IFF_NOTRAILERS	0x20		/* avoid use of trailers	*/
-#define	IFF_RUNNING	0x40		/* resources allocated		*/
+#define	IFF_RUNNING	0x40		/* interface RFC2863 OPER_UP	*/
 #define	IFF_NOARP	0x80		/* no ARP protocol		*/
 #define	IFF_PROMISC	0x100		/* receive all packets		*/
 #define	IFF_ALLMULTI	0x200		/* receive all multicast packets*/
@@ -43,15 +44,32 @@
 
 #define IFF_MULTICAST	0x1000		/* Supports multicast		*/
 
-#define IFF_VOLATILE	(IFF_LOOPBACK|IFF_POINTOPOINT|IFF_BROADCAST|IFF_MASTER|IFF_SLAVE|IFF_RUNNING)
-
 #define IFF_PORTSEL	0x2000          /* can set media type		*/
 #define IFF_AUTOMEDIA	0x4000		/* auto media select active	*/
 #define IFF_DYNAMIC	0x8000		/* dialup device with changing addresses*/
 
+#define IFF_LOWER_UP	0x10000		/* driver signals L1 up		*/
+#define IFF_DORMANT	0x20000		/* driver signals dormant	*/
+
+#define IFF_ECHO	0x40000		/* echo sent packets		*/
+
+#define IFF_VOLATILE	(IFF_LOOPBACK|IFF_POINTOPOINT|IFF_BROADCAST|IFF_ECHO|\
+		IFF_MASTER|IFF_SLAVE|IFF_RUNNING|IFF_LOWER_UP|IFF_DORMANT)
+
 /* Private (from user) interface flags (netdevice->priv_flags). */
 #define IFF_802_1Q_VLAN 0x1             /* 802.1Q VLAN device.          */
 #define IFF_EBRIDGE	0x2		/* Ethernet bridging device.	*/
+#define IFF_SLAVE_INACTIVE	0x4	/* bonding slave not the curr. active */
+#define IFF_MASTER_8023AD	0x8	/* bonding master, 802.3ad. 	*/
+#define IFF_MASTER_ALB	0x10		/* bonding master, balance-alb.	*/
+#define IFF_BONDING	0x20		/* bonding master or slave	*/
+#define IFF_SLAVE_NEEDARP 0x40		/* need ARPs for validation	*/
+#define IFF_ISATAP	0x80		/* ISATAP interface (RFC4214)	*/
+#define IFF_MASTER_ARPMON 0x100		/* bonding master, ARP mon in use */
+#define IFF_WAN_HDLC	0x200		/* WAN HDLC device		*/
+#define IFF_XMIT_DST_RELEASE 0x400	/* dev_hard_start_xmit() is allowed to
+					 * release skb->dst
+					 */
 
 #define IF_GET_IFACE	0x0001		/* for querying only */
 #define IF_GET_PROTO	0x0002
@@ -80,6 +98,22 @@
 #define IF_PROTO_FR_ETH_PVC 0x200B
 #define IF_PROTO_RAW    0x200C          /* RAW Socket                   */
 
+/* RFC 2863 operational status */
+enum {
+	IF_OPER_UNKNOWN,
+	IF_OPER_NOTPRESENT,
+	IF_OPER_DOWN,
+	IF_OPER_LOWERLAYERDOWN,
+	IF_OPER_TESTING,
+	IF_OPER_DORMANT,
+	IF_OPER_UP,
+};
+
+/* link modes */
+enum {
+	IF_LINK_MODE_DEFAULT,
+	IF_LINK_MODE_DORMANT,	/* limit upward transition to dormant */
+};
 
 /*
  *	Device mapping structure. I'd just gone off and designed a 
@@ -189,5 +223,4 @@ struct ifconf
 #define	ifc_buf	ifc_ifcu.ifcu_buf		/* buffer address	*/
 #define	ifc_req	ifc_ifcu.ifcu_req		/* array of structures	*/
 
-
 #endif /* _LINUX_IF_H */