X-Git-Url: http://ftp.safe.ca/?a=blobdiff_plain;f=fs%2FKconfig;h=2126078a38ede8fd89180b3051c835142785933f;hb=f91b90993f0d286be89f06c2f547ced8cfe291c6;hp=1d7c0f6fade44ced6d270f0d179102e5b811609c;hpb=9098c24f35f7da6c89a83420acf21e3d7b35151d;p=safe%2Fjmp%2Flinux-2.6 diff --git a/fs/Kconfig b/fs/Kconfig index 1d7c0f6..2126078 100644 --- a/fs/Kconfig +++ b/fs/Kconfig @@ -39,87 +39,51 @@ config FS_POSIX_ACL bool default n -config FILE_LOCKING - bool "Enable POSIX file locking API" if EMBEDDED - default y - help - This option enables standard file locking support, required - for filesystems like NFS and for the flock() system - call. Disabling this option saves about 11k. - source "fs/xfs/Kconfig" source "fs/gfs2/Kconfig" source "fs/ocfs2/Kconfig" source "fs/btrfs/Kconfig" +source "fs/nilfs2/Kconfig" endif # BLOCK -source "fs/notify/Kconfig" - -config QUOTA - bool "Quota support" - help - If you say Y here, you will be able to set per user limits for disk - usage (also called disk quotas). Currently, it works for the - ext2, ext3, and reiserfs file system. ext3 also supports journalled - quotas for which you don't need to run quotacheck(8) after an unclean - shutdown. - For further details, read the Quota mini-HOWTO, available from - , or the documentation provided - with the quota tools. Probably the quota support is only useful for - multi user systems. If unsure, say N. - -config QUOTA_NETLINK_INTERFACE - bool "Report quota messages through netlink interface" - depends on QUOTA && NET - help - If you say Y here, quota warnings (about exceeding softlimit, reaching - hardlimit, etc.) will be reported through netlink interface. If unsure, - say Y. - -config PRINT_QUOTA_WARNING - bool "Print quota warnings to console (OBSOLETE)" - depends on QUOTA +config FILE_LOCKING + bool "Enable POSIX file locking API" if EMBEDDED default y help - If you say Y here, quota warnings (about exceeding softlimit, reaching - hardlimit, etc.) will be printed to the process' controlling terminal. - Note that this behavior is currently deprecated and may go away in - future. Please use notification via netlink socket instead. - -# Generic support for tree structured quota files. Seleted when needed. -config QUOTA_TREE - tristate - -config QFMT_V1 - tristate "Old quota format support" - depends on QUOTA - help - This quota format was (is) used by kernels earlier than 2.4.22. If - you have quota working and you don't want to convert to new quota - format say Y here. - -config QFMT_V2 - tristate "Quota format v2 support" - depends on QUOTA - select QUOTA_TREE - help - This quota format allows using quotas with 32-bit UIDs/GIDs. If you - need this functionality say Y here. + This option enables standard file locking support, required + for filesystems like NFS and for the flock() system + call. Disabling this option saves about 11k. -config QUOTACTL - bool - depends on XFS_QUOTA || QUOTA - default y +source "fs/notify/Kconfig" + +source "fs/quota/Kconfig" source "fs/autofs/Kconfig" source "fs/autofs4/Kconfig" source "fs/fuse/Kconfig" +config CUSE + tristate "Character device in Userpace support" + depends on FUSE_FS + help + This FUSE extension allows character devices to be + implemented in userspace. + + If you want to develop or use userspace character device + based on CUSE, answer Y or M. + config GENERIC_ACL bool select FS_POSIX_ACL +menu "Caches" + +source "fs/fscache/Kconfig" +source "fs/cachefiles/Kconfig" + +endmenu + if BLOCK menu "CD-ROM/DVD Filesystems" @@ -145,6 +109,7 @@ source "fs/sysfs/Kconfig" config TMPFS bool "Virtual memory file system support (former shm fs)" + depends on SHMEM help Tmpfs is a file system which keeps all files in virtual memory. @@ -170,8 +135,8 @@ config TMPFS_POSIX_ACL config HUGETLBFS bool "HugeTLB file system support" - depends on X86 || IA64 || PPC64 || SPARC64 || (SUPERH && MMU) || \ - (S390 && 64BIT) || BROKEN + depends on X86 || IA64 || PPC_BOOK3S_64 || SPARC64 || (S390 && 64BIT) || \ + SYS_SUPPORTS_HUGETLBFS || BROKEN help hugetlbfs is a filesystem backing for HugeTLB pages, based on ramfs. For architectures that support it, say Y here and read @@ -222,6 +187,7 @@ source "fs/qnx4/Kconfig" source "fs/romfs/Kconfig" source "fs/sysv/Kconfig" source "fs/ufs/Kconfig" +source "fs/exofs/Kconfig" endif # MISC_FILESYSTEMS @@ -246,10 +212,12 @@ source "fs/nfsd/Kconfig" config LOCKD tristate + depends on FILE_LOCKING config LOCKD_V4 bool depends on NFSD_V3 || NFS_V3 + depends on FILE_LOCKING default y config EXPORTFS @@ -265,142 +233,12 @@ config NFS_COMMON default y source "net/sunrpc/Kconfig" - -config SMB_FS - tristate "SMB file system support (OBSOLETE, please use CIFS)" - depends on INET - select NLS - help - SMB (Server Message Block) is the protocol Windows for Workgroups - (WfW), Windows 95/98, Windows NT and OS/2 Lan Manager use to share - files and printers over local networks. Saying Y here allows you to - mount their file systems (often called "shares" in this context) and - access them just like any other Unix directory. Currently, this - works only if the Windows machines use TCP/IP as the underlying - transport protocol, and not NetBEUI. For details, read - and the SMB-HOWTO, - available from . - - Note: if you just want your box to act as an SMB *server* and make - files and printing services available to Windows clients (which need - to have a TCP/IP stack), you don't need to say Y here; you can use - the program SAMBA (available from ) - for that. - - General information about how to connect Linux, Windows machines and - Macs is on the WWW at . - - To compile the SMB support as a module, choose M here: - the module will be called smbfs. Most people say N, however. - -config SMB_NLS_DEFAULT - bool "Use a default NLS" - depends on SMB_FS - help - Enabling this will make smbfs use nls translations by default. You - need to specify the local charset (CONFIG_NLS_DEFAULT) in the nls - settings and you need to give the default nls for the SMB server as - CONFIG_SMB_NLS_REMOTE. - - The nls settings can be changed at mount time, if your smbmount - supports that, using the codepage and iocharset parameters. - - smbmount from samba 2.2.0 or later supports this. - -config SMB_NLS_REMOTE - string "Default Remote NLS Option" - depends on SMB_NLS_DEFAULT - default "cp437" - help - This setting allows you to specify a default value for which - codepage the server uses. If this field is left blank no - translations will be done by default. The local codepage/charset - default to CONFIG_NLS_DEFAULT. - - The nls settings can be changed at mount time, if your smbmount - supports that, using the codepage and iocharset parameters. - - smbmount from samba 2.2.0 or later supports this. - +source "fs/smbfs/Kconfig" source "fs/cifs/Kconfig" - -config NCP_FS - tristate "NCP file system support (to mount NetWare volumes)" - depends on IPX!=n || INET - help - NCP (NetWare Core Protocol) is a protocol that runs over IPX and is - used by Novell NetWare clients to talk to file servers. It is to - IPX what NFS is to TCP/IP, if that helps. Saying Y here allows you - to mount NetWare file server volumes and to access them just like - any other Unix directory. For details, please read the file - in the kernel source and - the IPX-HOWTO from . - - You do not have to say Y here if you want your Linux box to act as a - file *server* for Novell NetWare clients. - - General information about how to connect Linux, Windows machines and - Macs is on the WWW at . - - To compile this as a module, choose M here: the module will be called - ncpfs. Say N unless you are connected to a Novell network. - source "fs/ncpfs/Kconfig" - -config CODA_FS - tristate "Coda file system support (advanced network fs)" - depends on INET - help - Coda is an advanced network file system, similar to NFS in that it - enables you to mount file systems of a remote server and access them - with regular Unix commands as if they were sitting on your hard - disk. Coda has several advantages over NFS: support for - disconnected operation (e.g. for laptops), read/write server - replication, security model for authentication and encryption, - persistent client caches and write back caching. - - If you say Y here, your Linux box will be able to act as a Coda - *client*. You will need user level code as well, both for the - client and server. Servers are currently user level, i.e. they need - no kernel support. Please read - and check out the Coda - home page . - - To compile the coda client support as a module, choose M here: the - module will be called coda. - -config AFS_FS - tristate "Andrew File System support (AFS) (EXPERIMENTAL)" - depends on INET && EXPERIMENTAL - select AF_RXRPC - help - If you say Y here, you will get an experimental Andrew File System - driver. It currently only supports unsecured read-only AFS access. - - See for more information. - - If unsure, say N. - -config AFS_DEBUG - bool "AFS dynamic debugging" - depends on AFS_FS - help - Say Y here to make runtime controllable debugging messages appear. - - See for more information. - - If unsure, say N. - -config 9P_FS - tristate "Plan 9 Resource Sharing Support (9P2000) (Experimental)" - depends on INET && NET_9P && EXPERIMENTAL - help - If you say Y here, you will get experimental support for - Plan 9 resource sharing via the 9P2000 protocol. - - See for more information. - - If unsure, say N. +source "fs/coda/Kconfig" +source "fs/afs/Kconfig" +source "fs/9p/Kconfig" endif # NETWORK_FILESYSTEMS