X-Git-Url: http://ftp.safe.ca/?a=blobdiff_plain;f=drivers%2Fwatchdog%2FKconfig;h=55f64af072a430d4ce9337baa6b8dc6807ec3c4f;hb=e7a19c5624c66afa8118b10cd59f87ee407646bc;hp=4fd3fa5546b12282e5b25e521e5a7d5bb5bb829e;hpb=f0e625c1aa24e861c224fb778c377b2ddb443d2b;p=safe%2Fjmp%2Flinux-2.6

diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 4fd3fa5..55f64af 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -55,6 +55,13 @@ config SOFT_WATCHDOG
 	  To compile this driver as a module, choose M here: the
 	  module will be called softdog.
 
+config WM8350_WATCHDOG
+	tristate "WM8350 watchdog"
+	depends on MFD_WM8350
+	help
+	  Support for the watchdog in the WM8350 AudioPlus PMIC.  When
+	  the watchdog triggers the system will be reset.
+
 # ALPHA Architecture
 
 # ARM Architecture
@@ -180,10 +187,10 @@ config EP93XX_WATCHDOG
 
 config OMAP_WATCHDOG
 	tristate "OMAP Watchdog"
-	depends on ARCH_OMAP16XX || ARCH_OMAP24XX
+	depends on ARCH_OMAP16XX || ARCH_OMAP24XX || ARCH_OMAP34XX
 	help
-	  Support for TI OMAP1610/OMAP1710/OMAP2420 watchdog.  Say 'Y' here to
-	  enable the OMAP1610/OMAP1710 watchdog timer.
+	  Support for TI OMAP1610/OMAP1710/OMAP2420/OMAP3430 watchdog.  Say 'Y'
+	  here to enable the OMAP1610/OMAP1710/OMAP2420/OMAP3430 watchdog timer.
 
 config PNX4008_WATCHDOG
 	tristate "PNX4008 Watchdog"
@@ -399,7 +406,7 @@ config ITCO_WDT
 	---help---
 	  Hardware driver for the intel TCO timer based watchdog devices.
 	  These drivers are included in the Intel 82801 I/O Controller
-	  Hub family (from ICH0 up to ICH8) and in the Intel 6300ESB
+	  Hub family (from ICH0 up to ICH10) and in the Intel 63xxESB
 	  controller hub.
 
 	  The TCO (Total Cost of Ownership) timer is a watchdog timer
@@ -551,6 +558,18 @@ config CPU5_WDT
 	  To compile this driver as a module, choose M here: the
 	  module will be called cpu5wdt.
 
+config SMSC_SCH311X_WDT
+	tristate "SMSC SCH311X Watchdog Timer"
+	depends on X86
+	---help---
+	  This is the driver for the hardware watchdog timer on the
+	  SMSC SCH3112, SCH3114 and SCH3116 Super IO chipset
+	  (LPC IO with 8042 KBC, Reset Generation, HWM and multiple
+	  serial ports).
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called sch311x_wdt.
+
 config SMSC37B787_WDT
 	tristate "Winbond SMsC37B787 Watchdog Timer"
 	depends on X86
@@ -751,6 +770,12 @@ config TXX9_WDT
 
 # POWERPC Architecture
 
+config GEF_WDT
+	tristate "GE Fanuc Watchdog Timer"
+	depends on GEF_SBC610
+	---help---
+	  Watchdog timer found in a number of GE Fanuc single board computers.
+
 config MPC5200_WDT
 	tristate "MPC5200 Watchdog Timer"
 	depends on PPC_MPC52xx
@@ -771,6 +796,14 @@ config MV64X60_WDT
 	tristate "MV64X60 (Marvell Discovery) Watchdog Timer"
 	depends on MV64X60
 
+config PIKA_WDT
+	tristate "PIKA FPGA Watchdog"
+	depends on WARP
+	default y
+	help
+	  This enables the watchdog in the PIKA FPGA. Currently used on
+	  the Warp platform.
+
 config BOOKE_WDT
 	bool "PowerPC Book-E Watchdog Timer"
 	depends on BOOKE || 4xx
@@ -907,21 +940,6 @@ config WDT
 	  To compile this driver as a module, choose M here: the
 	  module will be called wdt.
 
-config WDT_501
-	bool "WDT501 features"
-	depends on WDT
-	help
-	  Saying Y here and creating a character special file /dev/temperature
-	  with major number 10 and minor number 131 ("man mknod") will give
-	  you a thermometer inside your computer: reading from
-	  /dev/temperature yields one byte, the temperature in degrees
-	  Fahrenheit. This works only if you have a WDT501P watchdog board
-	  installed.
-
-	  If you want to enable the Fan Tachometer on the WDT501P, then you
-	  can do this via the tachometer parameter. Only do this if you have a
-	  fan tachometer actually set up.
-
 #
 # PCI-based Watchdog Cards
 #