X-Git-Url: http://ftp.safe.ca/?a=blobdiff_plain;f=drivers%2Fwatchdog%2FKconfig;h=0e8468ffd100fe638fc686464cead507ba679342;hb=14e71e4fb94c340273534a6d7f210aa82a3ca717;hp=b166f2852a64bb50b70252a0c1498322bdd456b7;hpb=489f7ab6c18cdd64a2d444e056d60a0e722f4ad7;p=safe%2Fjmp%2Flinux-2.6

diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index b166f28..0e8468f 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -55,6 +55,13 @@ config SOFT_WATCHDOG
 	  To compile this driver as a module, choose M here: the
 	  module will be called softdog.
 
+config WM831X_WATCHDOG
+	tristate "WM831x watchdog"
+	depends on MFD_WM831X
+	help
+	  Support for the watchdog in the WM831x AudioPlus PMICs.  When
+	  the watchdog triggers the system will be reset.
+
 config WM8350_WATCHDOG
 	tristate "WM8350 watchdog"
 	depends on MFD_WM8350
@@ -187,7 +194,7 @@ config EP93XX_WATCHDOG
 
 config OMAP_WATCHDOG
 	tristate "OMAP Watchdog"
-	depends on ARCH_OMAP16XX || ARCH_OMAP24XX || ARCH_OMAP34XX
+	depends on ARCH_OMAP16XX || ARCH_OMAP2 || ARCH_OMAP3
 	help
 	  Support for TI OMAP1610/OMAP1710/OMAP2420/OMAP3430 watchdog.  Say 'Y'
 	  here to enable the OMAP1610/OMAP1710/OMAP2420/OMAP3430 watchdog timer.
@@ -240,6 +247,65 @@ config ORION_WATCHDOG
 	  To compile this driver as a module, choose M here: the
 	  module will be called orion_wdt.
 
+config COH901327_WATCHDOG
+	bool "ST-Ericsson COH 901 327 watchdog"
+	depends on ARCH_U300
+	default y if MACH_U300
+	help
+	  Say Y here to include Watchdog timer support for the
+	  watchdog embedded into the ST-Ericsson U300 series platforms.
+	  This watchdog is used to reset the system and thus cannot be
+	  compiled as a module.
+
+config TWL4030_WATCHDOG
+	tristate "TWL4030 Watchdog"
+	depends on TWL4030_CORE
+	help
+	  Support for TI TWL4030 watchdog.  Say 'Y' here to enable the
+	  watchdog timer support for TWL4030 chips.
+
+config STMP3XXX_WATCHDOG
+	tristate "Freescale STMP3XXX watchdog"
+	depends on ARCH_STMP3XXX
+	help
+	  Say Y here if to include support for the watchdog timer
+	  for the Sigmatel STMP37XX/378X SoC.
+	  To compile this driver as a module, choose M here: the
+	  module will be called stmp3xxx_wdt.
+
+config NUC900_WATCHDOG
+	tristate "Nuvoton NUC900 watchdog"
+	depends on ARCH_W90X900
+	help
+	  Say Y here if to include support for the watchdog timer
+	  for the Nuvoton NUC900 series SoCs.
+	  To compile this driver as a module, choose M here: the
+	  module will be called nuc900_wdt.
+
+config ADX_WATCHDOG
+	tristate "Avionic Design Xanthos watchdog"
+	depends on ARCH_PXA_ADX
+	help
+	  Say Y here if you want support for the watchdog timer on Avionic
+	  Design Xanthos boards.
+
+config TS72XX_WATCHDOG
+	tristate "TS-72XX SBC Watchdog"
+	depends on MACH_TS72XX
+	help
+	  Technologic Systems TS-7200, TS-7250 and TS-7260 boards have
+	  watchdog timer implemented in a external CPLD chip. Say Y here
+	  if you want to support for the watchdog timer on TS-72XX boards.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ts72xx_wdt.
+
+config MAX63XX_WATCHDOG
+	tristate "Max63xx watchdog"
+	depends on ARM
+	help
+	  Support for memory mapped max63{69,70,71,72,73,74} watchdog timer.
+
 # AVR32 Architecture
 
 config AT32AP700X_WDT
@@ -319,7 +385,7 @@ config ALIM7101_WDT
 
 config GEODE_WDT
 	tristate "AMD Geode CS5535/CS5536 Watchdog"
-	depends on MGEODE_LX
+	depends on CS5535_MFGPT
 	help
 	  This driver enables a watchdog capability built into the
 	  CS5535/CS5536 companion chips for the AMD Geode GX and LX
@@ -343,6 +409,28 @@ config SC520_WDT
 	  You can compile this driver directly into the kernel, or use
 	  it as a module.  The module will be called sc520_wdt.
 
+config SBC_FITPC2_WATCHDOG
+	tristate "Compulab SBC-FITPC2 watchdog"
+	depends on X86
+	---help---
+	  This is the driver for the built-in watchdog timer on the fit-PC2,
+	  fit-PC2i, CM-iAM single-board computers made by Compulab.
+
+	  It`s possible to enable watchdog timer either from BIOS (F2) or from booted Linux.
+	  When "Watchdog Timer Value" enabled one can set 31-255 s operational range.
+
+	  Entering BIOS setup temporary disables watchdog operation regardless to current state,
+	  so system will not be restarted while user in BIOS setup.
+
+	  Once watchdog was enabled the system will be restarted every
+	  "Watchdog Timer Value" period, so to prevent it user can restart or
+	  disable the watchdog.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called sbc_fitpc2_wdt.
+
+	  Most people will say N.
+
 config EUROTECH_WDT
 	tristate "Eurotech CPU-1220/1410 Watchdog Timer"
 	depends on X86
@@ -703,6 +791,12 @@ config SBC_EPX_C3_WATCHDOG
 
 # MIPS Architecture
 
+config BCM47XX_WDT
+	tristate "Broadcom BCM47xx Watchdog Timer"
+	depends on BCM47XX
+	help
+	  Hardware driver for the Broadcom BCM47xx Watchog Timer.
+
 config RC32434_WDT
 	tristate "IDT RC32434 SoC Watchdog Timer"
 	depends on MIKROTIK_RB532
@@ -729,15 +823,14 @@ config WDT_MTX1
 	  Hardware driver for the MTX-1 boards. This is a watchdog timer that
 	  will reboot the machine after a 100 seconds timer expired.
 
-config WDT_RM9K_GPI
-	tristate "RM9000/GPI hardware watchdog"
-	depends on CPU_RM9000
+config PNX833X_WDT
+	tristate "PNX833x Hardware Watchdog"
+	depends on SOC_PNX8335
 	help
-	  Watchdog implementation using the GPI hardware found on
-	  PMC-Sierra RM9xxx CPUs.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called rm9k_wdt.
+	  Hardware driver for the PNX833x's watchdog. This is a
+	  watchdog timer that will reboot the machine after a programable
+	  timer has expired and no process has written to /dev/watchdog during
+	  that time.
 
 config SIBYTE_WDOG
 	tristate "Sibyte SoC hardware watchdog"
@@ -769,14 +862,16 @@ config TXX9_WDT
 # POWERPC Architecture
 
 config GEF_WDT
-	tristate "GE Fanuc Watchdog Timer"
+	tristate "GE Watchdog Timer"
 	depends on GEF_SBC610 || GEF_SBC310 || GEF_PPC9A
 	---help---
-	  Watchdog timer found in a number of GE Fanuc single board computers.
+	  Watchdog timer found in a number of GE single board computers.
 
 config MPC5200_WDT
-	tristate "MPC5200 Watchdog Timer"
+	bool "MPC52xx Watchdog Timer"
 	depends on PPC_MPC52xx
+	help
+	  Use General Purpose Timer (GPT) 0 on the MPC5200 as Watchdog.
 
 config 8xxx_WDT
 	tristate "MPC8xxx Platform Watchdog Timer"
@@ -966,24 +1061,16 @@ config WDTPCI
 	---help---
 	  If you have a PCI-WDT500/501 watchdog board, say Y here, otherwise N.
 
-	  To compile this driver as a module, choose M here: the
-	  module will be called wdt_pci.
-
-config WDT_501_PCI
-	bool "PCI-WDT501 features"
-	depends on WDTPCI
-	help
-	  Saying Y here and creating a character special file /dev/temperature
-	  with major number 10 and minor number 131 ("man mknod") will give
-	  you a thermometer inside your computer: reading from
-	  /dev/temperature yields one byte, the temperature in degrees
-	  Fahrenheit. This works only if you have a PCI-WDT501 watchdog board
-	  installed.
+	  If you have a PCI-WDT501 watchdog board then you can enable the
+	  temperature sensor by setting the type parameter to 501.
 
 	  If you want to enable the Fan Tachometer on the PCI-WDT501, then you
 	  can do this via the tachometer parameter. Only do this if you have a
 	  fan tachometer actually set up.
 
+	  To compile this driver as a module, choose M here: the
+	  module will be called wdt_pci.
+
 #
 # USB-based Watchdog Cards
 #