X-Git-Url: http://ftp.safe.ca/?a=blobdiff_plain;f=drivers%2Fvideo%2Fsstfb.c;h=62fa5500361d2a1b8a1ce7418c1b81f9d1044d1b;hb=d1dea38d54311f6b3dd37ce485e794bd133e3593;hp=dad54e73147b4d68420fb5c189889c94213f34bd;hpb=6ab3d5624e172c553004ecc862bfeac16d9d68b7;p=safe%2Fjmp%2Flinux-2.6

diff --git a/drivers/video/sstfb.c b/drivers/video/sstfb.c
index dad54e7..62fa550 100644
--- a/drivers/video/sstfb.c
+++ b/drivers/video/sstfb.c
@@ -17,7 +17,15 @@
  *	(port driver to new frambuffer infrastructure)
  * 01/2003 Helge Deller    <deller@gmx.de>
  *	(initial work on fb hardware acceleration for voodoo2)
- *
+ * 08/2006 Alan Cox 	   <alan@redhat.com>
+ *	Remove never finished and bogus 24/32bit support
+ *	Clean up macro abuse
+ *	Minor tidying for format.
+ * 12/2006 Helge Deller    <deller@gmx.de>
+ *	add /sys/class/graphics/fbX/vgapass sysfs-interface
+ *	add module option "mode_option" to set initial screen mode
+ *	use fbdev default videomode database
+ *	remove debug functions from ioctl
  */
 
 /*
@@ -40,6 +48,7 @@
        through the fifo. warning: issuing a nop command seems to need pci_fifo
 -FIXME: in case of failure in the init sequence, be sure we return to a safe
         state.
+- FIXME: Use accelerator for 2D scroll
 -FIXME: 4MB boards have banked memory (FbiInit2 bits 1 & 20)
  */
 
@@ -61,22 +70,10 @@
  *
  * sstfb specific ioctls:
  *   		toggle vga (0x46db) : toggle vga_pass_through
- *   		fill fb    (0x46dc) : fills fb
- *   		test disp  (0x46de) : draws a test image
  */
 
 #undef SST_DEBUG
 
-/* enable 24/32 bpp functions ? (completely untested!) */
-#undef EN_24_32_BPP
-
-/*
-  Default video mode .
-  0 800x600@60  took from glide
-  1 640x480@75  took from glide
-  2 1024x768@76 std fb.mode
-  3 640x480@60  glide default */
-#define DEFAULT_MODE 3 
 
 /*
  * Includes
@@ -91,20 +88,24 @@
 #include <linux/init.h>
 #include <linux/slab.h>
 #include <asm/io.h>
-#include <asm/ioctl.h>
 #include <asm/uaccess.h>
 #include <video/sstfb.h>
 
 
 /* initialized by setup */
 
-static int vgapass;		/* enable Vga passthrough cable */
+static int vgapass;		/* enable VGA passthrough cable */
 static int mem;			/* mem size in MB, 0 = autodetect */
 static int clipping = 1;	/* use clipping (slower, safer) */
 static int gfxclk;		/* force FBI freq in Mhz . Dangerous */
 static int slowpci;		/* slow PCI settings */
 
-static char *mode_option __devinitdata;
+/*
+  Possible default video modes: 800x600@60, 640x480@75, 1024x768@76, 640x480@60
+*/
+#define DEFAULT_VIDEO_MODE "640x480@60"
+
+static char *mode_option __devinitdata = DEFAULT_VIDEO_MODE;
 
 enum {
 	ID_VOODOO1 = 0,
@@ -118,48 +119,11 @@ static struct sst_spec voodoo_spec[] __devinitdata = {
  { .name = "Voodoo2",	      .default_gfx_clock = 75000, .max_gfxclk = 85 },
 };
 
-static struct fb_var_screeninfo	sstfb_default =
-#if ( DEFAULT_MODE == 0 )
-    { /* 800x600@60, 16 bpp .borowed from glide/sst1/include/sst1init.h */
-    800, 600, 800, 600, 0, 0, 16, 0,
-    {11, 5, 0}, {5, 6, 0}, {0, 5, 0}, {0, 0, 0},
-    0, 0, -1, -1, 0,
-    25000, 86, 41, 23, 1, 127, 4,
-    0, FB_VMODE_NONINTERLACED };
-#elif ( DEFAULT_MODE == 1 )
-    {/* 640x480@75, 16 bpp .borowed from glide/sst1/include/sst1init.h */
-    640, 480, 640, 480, 0, 0, 16, 0,
-    {11, 5, 0}, {5, 6, 0}, {0, 5, 0}, {0, 0, 0},
-    0, 0, -1, -1, 0,
-    31746, 118, 17, 16, 1, 63, 3,
-    0, FB_VMODE_NONINTERLACED };
-#elif ( DEFAULT_MODE == 2 )
-    { /* 1024x768@76 took from my /etc/fb.modes */
-    1024, 768, 1024, 768,0, 0, 16,0,
-    {11, 5, 0}, {5, 6, 0}, {0, 5, 0}, {0, 0, 0},
-    0, 0, -1, -1, 0,
-    11764, 208, 8, 36, 16, 120, 3 ,
-    0, FB_VMODE_NONINTERLACED };
-#elif ( DEFAULT_MODE == 3 )
-    { /* 640x480@60 , 16bpp glide default ?*/
-    640, 480, 640, 480, 0, 0, 16, 0,
-    {11, 5, 0}, {5, 6, 0}, {0, 5, 0}, {0, 0, 0},
-    0, 0, -1, -1, 0,
-    39721 ,  38, 26 ,  25 ,18  , 96 ,2,
-    0, FB_VMODE_NONINTERLACED };
-#elif
-    #error "Invalid DEFAULT_MODE value !"
-#endif
-
 
 /*
  * debug functions
  */
 
-static void sstfb_drawdebugimage(struct fb_info *info);
-static int sstfb_dump_regs(struct fb_info *info);
-
-
 #if (SST_DEBUG_REG > 0)
 static void sst_dbg_print_read_reg(u32 reg, u32 val) {
 	const char *regname;
@@ -293,6 +257,7 @@ static void __sst_dac_write(u8 __iomem *vbase, u8 reg, u8 val)
 	r_dprintk("sst_dac_write(%#x, %#x)\n", reg, val);
 	reg &= 0x07;
 	__sst_write(vbase, DAC_DATA,(((u32)reg << 8)) | (u32)val);
+	__sst_wait_idle(vbase);
 }
 
 /* indexed access to ti/att dacs */
@@ -377,7 +342,11 @@ static void sstfb_clear_screen(struct fb_info *info)
  *      sstfb_check_var - Optional function.  Validates a var passed in.
  *      @var: frame buffer variable screen structure
  *      @info: frame buffer structure that represents a single frame buffer
+ *
+ *	Limit to the abilities of a single chip as SLI is not supported
+ *	by this driver.
  */
+
 static int sstfb_check_var(struct fb_var_screeninfo *var,
 		struct fb_info *info)
 {
@@ -390,7 +359,7 @@ static int sstfb_check_var(struct fb_var_screeninfo *var,
 	unsigned int freq;
 
 	if (sst_calc_pll(PICOS2KHZ(var->pixclock), &freq, &par->pll)) {
-		eprintk("Pixclock at %ld KHZ out of range\n",
+		printk(KERN_ERR "sstfb: Pixclock at %ld KHZ out of range\n",
 				PICOS2KHZ(var->pixclock));
 		return -EINVAL;
 	}
@@ -409,27 +378,15 @@ static int sstfb_check_var(struct fb_var_screeninfo *var,
 	case 0 ... 16 :
 		var->bits_per_pixel = 16;
 		break;
-#ifdef EN_24_32_BPP
-	case 17 ... 24 :
-		var->bits_per_pixel = 24;
-		break;
-	case 25 ... 32 :
-		var->bits_per_pixel = 32;
-		break;
-#endif
 	default :
-		eprintk("Unsupported bpp %d\n", var->bits_per_pixel);
+		printk(KERN_ERR "sstfb: Unsupported bpp %d\n", var->bits_per_pixel);
 		return -EINVAL;
 	}
 	
 	/* validity tests */
-	if ((var->xres <= 1) || (yDim <= 0 )
-	   || (var->hsync_len <= 1)
-	   || (hSyncOff <= 1)
-	   || (var->left_margin <= 2)
-	   || (vSyncOn <= 0)
-	   || (vSyncOff <= 0)
-	   || (vBackPorch <= 0)) {
+	if (var->xres <= 1 || yDim <= 0 || var->hsync_len <= 1  ||
+	    hSyncOff <= 1  || var->left_margin <= 2  || vSyncOn <= 0 ||
+	    vSyncOff <= 0 || vBackPorch <= 0) {
 		return -EINVAL;
 	}
 
@@ -437,21 +394,17 @@ static int sstfb_check_var(struct fb_var_screeninfo *var,
 		/* Voodoo 2 limits */
 		tiles_in_X = (var->xres + 63 ) / 64 * 2;		
 
-		if (((var->xres - 1) >= POW2(11)) || (yDim >= POW2(11))) {
-			eprintk("Unsupported resolution %dx%d\n",
+		if (var->xres  > POW2(11) || yDim >= POW2(11)) {
+			printk(KERN_ERR "sstfb: Unsupported resolution %dx%d\n",
 			         var->xres, var->yres);
 			return -EINVAL;
 		}
 
-		if (((var->hsync_len-1) >= POW2(9))
-		   || ((hSyncOff-1) >= POW2(11))
-		   || ((var->left_margin - 2) >= POW2(9))
-		   || (vSyncOn >= POW2(13))
-		   || (vSyncOff >= POW2(13))
-		   || (vBackPorch >= POW2(9))
-		   || (tiles_in_X >= POW2(6))
-		   || (tiles_in_X <= 0)) {
-			eprintk("Unsupported Timings\n");
+		if (var->hsync_len > POW2(9) || hSyncOff > POW2(11) ||
+		    var->left_margin - 2 >= POW2(9) || vSyncOn >= POW2(13) ||
+		    vSyncOff >= POW2(13) || vBackPorch >= POW2(9) ||
+		    tiles_in_X >= POW2(6) || tiles_in_X <= 0) {
+			printk(KERN_ERR "sstfb: Unsupported timings\n");
 			return -EINVAL;
 		}
 	} else {
@@ -459,24 +412,20 @@ static int sstfb_check_var(struct fb_var_screeninfo *var,
 		tiles_in_X = (var->xres + 63 ) / 64;
 
 		if (var->vmode) {
-			eprintk("Interlace/Doublescan not supported %#x\n",
+			printk(KERN_ERR "sstfb: Interlace/doublescan not supported %#x\n",
 				var->vmode);
 			return -EINVAL;
 		}
-		if (((var->xres - 1) >= POW2(10)) || (var->yres >= POW2(10))) {
-			eprintk("Unsupported resolution %dx%d\n",
+		if (var->xres > POW2(10) || var->yres >= POW2(10)) {
+			printk(KERN_ERR "sstfb: Unsupported resolution %dx%d\n",
 			         var->xres, var->yres);
 			return -EINVAL;
 		}
-		if (((var->hsync_len - 1) >= POW2(8))
-		   || ((hSyncOff-1) >= POW2(10))
-		   || ((var->left_margin - 2) >= POW2(8))
-		   || (vSyncOn >= POW2(12))
-		   || (vSyncOff >= POW2(12))
-		   || (vBackPorch >= POW2(8))
-		   || (tiles_in_X >= POW2(4))
-		   || (tiles_in_X <= 0)) {
-			eprintk("Unsupported Timings\n");
+		if (var->hsync_len > POW2(8) || hSyncOff - 1 > POW2(10) ||
+		    var->left_margin - 2 >= POW2(8) || vSyncOn >= POW2(12) ||
+		    vSyncOff >= POW2(12) || vBackPorch >= POW2(8) ||
+		    tiles_in_X >= POW2(4) || tiles_in_X <= 0) {
+			printk(KERN_ERR "sstfb: Unsupported timings\n");
 			return -EINVAL;
 		}
 	}
@@ -486,8 +435,8 @@ static int sstfb_check_var(struct fb_var_screeninfo *var,
 	real_length = tiles_in_X  * (IS_VOODOO2(par) ? 32 : 64 )
 	              * ((var->bits_per_pixel == 16) ? 2 : 4);
 
-	if ((real_length * yDim) > info->fix.smem_len) {
-		eprintk("Not enough video memory\n");
+	if (real_length * yDim > info->fix.smem_len) {
+		printk(KERN_ERR "sstfb: Not enough video memory\n");
 		return -ENOMEM;
 	}
 
@@ -515,20 +464,6 @@ static int sstfb_check_var(struct fb_var_screeninfo *var,
 		var->blue.offset   = 0;
 		var->transp.offset = 0;
 		break;
-#ifdef EN_24_32_BPP
-	case 24:	/* RGB 888 LfbMode 4 */
-	case 32:	/* ARGB 8888 LfbMode 5 */
-		var->red.length    = 8;
-		var->green.length  = 8;
-		var->blue.length   = 8;
-		var->transp.length = 0;
-
-		var->red.offset    = 16;
-		var->green.offset  = 8;
-		var->blue.offset   = 0;
-		var->transp.offset = 0; /* in 24bpp we fake a 32 bpp mode */
-		break;
-#endif
 	default:
 		return -EINVAL;
 	}
@@ -653,13 +588,6 @@ static int sstfb_set_par(struct fb_info *info)
 	case 16:
 		fbiinit1 |=  SEL_SOURCE_VCLK_2X_SEL;
 		break;
-#ifdef EN_24_32_BPP
-	case 24:
-	case 32:
-		/* sst_set_bits(FBIINIT1, SEL_SOURCE_VCLK_2X_DIV2 | EN_24BPP);*/
-		fbiinit1 |= SEL_SOURCE_VCLK_2X_SEL | EN_24BPP;
-		break;
-#endif
 	default:
 		return -EINVAL;
 	}
@@ -690,14 +618,6 @@ static int sstfb_set_par(struct fb_info *info)
 	case 16:
 		lfbmode = LFB_565;
 		break;
-#ifdef EN_24_32_BPP
-	case 24:
-		lfbmode = LFB_888;
-		break;
-	case 32:
-		lfbmode = LFB_8888;
-		break;
-#endif
 	default:
 		return -EINVAL;
 	}
@@ -770,55 +690,77 @@ static int sstfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
 	return 0;
 }
 
-static int sstfb_ioctl(struct fb_info *info, u_int cmd, u_long arg)
+static void sstfb_setvgapass( struct fb_info *info, int enable )
 {
 	struct sstfb_par *par = info->par;
 	struct pci_dev *sst_dev = par->dev;
-	u32 fbiinit0, tmp, val;
-	u_long p;
+	u32 fbiinit0, tmp;
+
+	enable = enable ? 1:0;
+	if (par->vgapass == enable)
+		return;
+	par->vgapass = enable;
+
+	pci_read_config_dword(sst_dev, PCI_INIT_ENABLE, &tmp);
+	pci_write_config_dword(sst_dev, PCI_INIT_ENABLE,
+			       tmp | PCI_EN_INIT_WR );
+	fbiinit0 = sst_read (FBIINIT0);
+	if (par->vgapass) {
+		sst_write(FBIINIT0, fbiinit0 & ~DIS_VGA_PASSTHROUGH);
+		printk(KERN_INFO "fb%d: Enabling VGA pass-through\n", info->node );
+	} else {
+		sst_write(FBIINIT0, fbiinit0 | DIS_VGA_PASSTHROUGH);
+		printk(KERN_INFO "fb%d: Disabling VGA pass-through\n", info->node );
+	}
+	pci_write_config_dword(sst_dev, PCI_INIT_ENABLE, tmp);
+}
+
+static ssize_t store_vgapass(struct device *device, struct device_attribute *attr,
+			const char *buf, size_t count)
+{
+	struct fb_info *info = dev_get_drvdata(device);
+	char ** last = NULL;
+	int val;
+
+	val = simple_strtoul(buf, last, 0);
+	sstfb_setvgapass(info, val);
+
+	return count;
+}
+
+static ssize_t show_vgapass(struct device *device, struct device_attribute *attr,
+			char *buf)
+{
+	struct fb_info *info = dev_get_drvdata(device);
+	struct sstfb_par *par = info->par;
+	return snprintf(buf, PAGE_SIZE, "%d\n", par->vgapass);
+}
+
+static struct device_attribute device_attrs[] = {
+	__ATTR(vgapass, S_IRUGO|S_IWUSR, show_vgapass, store_vgapass)
+	};
+
+static int sstfb_ioctl(struct fb_info *info, unsigned int cmd,
+			unsigned long arg)
+{
+	struct sstfb_par *par;
+	u32 val;
 
 	switch (cmd) {
-		
-	/* dump current FBIINIT values to system log */
-	case _IO('F', 0xdb):            /* 0x46db */
-		return sstfb_dump_regs(info);
-		
-	/* fills lfb with #arg pixels */
-	case _IOW('F', 0xdc, u32):	/* 0x46dc */
+	/* set/get VGA pass_through mode */
+	case SSTFB_SET_VGAPASS:
 		if (copy_from_user(&val, (void __user *)arg, sizeof(val)))
 			return -EFAULT;
-		if (val > info->fix.smem_len)
-			val = info->fix.smem_len;
-		printk("filling %#x \n", val);
-		for (p=0 ; p<val; p+=2)
-			writew(p >> 6, info->screen_base + p);
+		sstfb_setvgapass(info, val);
 		return 0;
-		
-	/* change VGA pass_through mode */
-	case _IOW('F', 0xdd, u32):	/* 0x46dd */
-		if (copy_from_user(&val, (void __user *)arg, sizeof(val)))
+	case SSTFB_GET_VGAPASS:
+		par = info->par;
+		val = par->vgapass;
+		if (copy_to_user((void __user *)arg, &val, sizeof(val)))
 			return -EFAULT;
-		pci_read_config_dword(sst_dev, PCI_INIT_ENABLE, &tmp);
-		pci_write_config_dword(sst_dev, PCI_INIT_ENABLE,
-				       tmp | PCI_EN_INIT_WR );
-		fbiinit0 = sst_read (FBIINIT0);
-		if (val) {
-			sst_write(FBIINIT0, fbiinit0 & ~EN_VGA_PASSTHROUGH);
-			iprintk("Disabling VGA pass-through\n");
-		} else {
-			sst_write(FBIINIT0, fbiinit0 | EN_VGA_PASSTHROUGH);
-			iprintk("Enabling VGA pass-through\n");
-		}
-		pci_write_config_dword(sst_dev, PCI_INIT_ENABLE, tmp);
-		return 0;
-		
-	/* draw test image  */
-	case _IO('F', 0xde):		/* 0x46de */
-		f_dprintk("test color display at %d bpp\n",
-					info->var.bits_per_pixel);
-		sstfb_drawdebugimage(info);
 		return 0;
 	}
+
 	return -EINVAL;
 }
 
@@ -852,6 +794,7 @@ static void sstfb_copyarea(struct fb_info *info, const struct fb_copyarea *area)
 /*
  * FillRect 2D command (solidfill or invert (via ROP_XOR)) - Voodoo2 only
  */
+#if 0
 static void sstfb_fillrect(struct fb_info *info, const struct fb_fillrect *rect) 
 {
 	struct sstfb_par *par = info->par;
@@ -873,6 +816,7 @@ static void sstfb_fillrect(struct fb_info *info, const struct fb_fillrect *rect)
 		 | (BLT_16BPP_FMT << 3) /* | BIT(14) */ | BIT(15) | BIT(16) );
 	sst_wait_idle();
 }
+#endif
 
 
 
@@ -884,9 +828,9 @@ static int __devinit sst_get_memsize(struct fb_info *info, __u32 *memsize)
 	u8 __iomem *fbbase_virt = info->screen_base;
 
 	/* force memsize */
-	if ((mem >= 1 ) &&  (mem <= 4)) {
+	if (mem >= 1  && mem <= 4) {
 		*memsize = (mem * 0x100000);
-		iprintk("supplied memsize: %#x\n", *memsize);
+		printk(KERN_INFO "supplied memsize: %#x\n", *memsize);
 		return 1;
 	}
 
@@ -927,7 +871,7 @@ static int __devinit sst_detect_att(struct fb_info *info)
 	struct sstfb_par *par = info->par;
 	int i, mir, dir;
 
-	for (i=0; i<3; i++) {
+	for (i = 0; i < 3; i++) {
 		sst_dac_write(DACREG_WMA, 0); 	/* backdoor */
 		sst_dac_read(DACREG_RMR);	/* read 4 times RMR */
 		sst_dac_read(DACREG_RMR);
@@ -940,7 +884,7 @@ static int __devinit sst_detect_att(struct fb_info *info)
 		/*the 7th, device ID register */
 		dir = sst_dac_read(DACREG_RMR);
 		f_ddprintk("mir: %#x, dir: %#x\n", mir, dir);
-		if ((mir == DACREG_MIR_ATT ) && (dir == DACREG_DIR_ATT)) {
+		if (mir == DACREG_MIR_ATT && dir == DACREG_DIR_ATT) {
 			return 1;
 		}
 	}
@@ -1134,12 +1078,6 @@ static void sst_set_vidmod_att_ti(struct fb_info *info, const int bpp)
 	case 16:
 		sst_dac_write(DACREG_RMR, (cr0 & 0x0f) | DACREG_CR0_16BPP);
 		break;
-#ifdef EN_24_32_BPP
-	case 24:
-	case 32:
-		sst_dac_write(DACREG_RMR, (cr0 & 0x0f) | DACREG_CR0_24BPP);
-		break;
-#endif
 	default:
 		dprintk("%s: bad depth '%u'\n", __FUNCTION__, bpp);
 		break;
@@ -1154,12 +1092,6 @@ static void sst_set_vidmod_ics(struct fb_info *info, const int bpp)
 	case 16:
 		sst_dac_write(DACREG_ICS_CMD, DACREG_ICS_CMD_16BPP);
 		break;
-#ifdef EN_24_32_BPP
-	case 24:
-	case 32:
-		sst_dac_write(DACREG_ICS_CMD, DACREG_ICS_CMD_24BPP);
-		break;
-#endif
 	default:
 		dprintk("%s: bad depth '%u'\n", __FUNCTION__, bpp);
 		break;
@@ -1216,6 +1148,7 @@ static int __devinit sst_init(struct fb_info *info, struct sstfb_par *par)
 	struct pll_timing gfx_timings;
 	struct sst_spec *spec;
 	int Fout;
+	int gfx_clock;
 
 	spec = &voodoo_spec[par->type];
 	f_ddprintk(" fbiinit0   fbiinit1   fbiinit2   fbiinit3   fbiinit4  "
@@ -1250,21 +1183,21 @@ static int __devinit sst_init(struct fb_info *info, struct sstfb_par *par)
 				PCI_EN_INIT_WR | PCI_REMAP_DAC );
 	/* detect dac type */
 	if (!sst_detect_dactype(info, par)) {
-		eprintk("Unknown dac type\n");
+		printk(KERN_ERR "sstfb: unknown dac type.\n");
 		//FIXME watch it: we are not in a safe state, bad bad bad.
 		return 0;
 	}
 
 	/* set graphic clock */
-	par->gfx_clock = spec->default_gfx_clock;
+	gfx_clock = spec->default_gfx_clock;
 	if ((gfxclk >10 ) && (gfxclk < spec->max_gfxclk)) {
-		iprintk("Using supplied graphic freq : %dMHz\n", gfxclk);
-		 par->gfx_clock = gfxclk *1000;
+		printk(KERN_INFO "sstfb: Using supplied graphic freq : %dMHz\n", gfxclk);
+		 gfx_clock = gfxclk *1000;
 	} else if (gfxclk) {
-		wprintk ("%dMhz is way out of spec! Using default\n", gfxclk);
+		printk(KERN_WARNING "sstfb: %dMhz is way out of spec! Using default\n", gfxclk);
 	}
 
-	sst_calc_pll(par->gfx_clock, &Fout, &gfx_timings);
+	sst_calc_pll(gfx_clock, &Fout, &gfx_timings);
 	par->dac_sw.set_pll(info, &gfx_timings, GFX_CLOCK);
 
 	/* disable fbiinit remap */
@@ -1275,10 +1208,11 @@ static int __devinit sst_init(struct fb_info *info, struct sstfb_par *par)
 	fbiinit0 = FBIINIT0_DEFAULT;
 	fbiinit1 = FBIINIT1_DEFAULT;
 	fbiinit4 = FBIINIT4_DEFAULT;
-	if (vgapass)
-		fbiinit0 &= ~EN_VGA_PASSTHROUGH;
+	par->vgapass = vgapass;
+	if (par->vgapass)
+		fbiinit0 &= ~DIS_VGA_PASSTHROUGH;
 	else
-		fbiinit0 |= EN_VGA_PASSTHROUGH;
+		fbiinit0 |= DIS_VGA_PASSTHROUGH;
 	if (slowpci) {
 		fbiinit1 |= SLOW_PCI_WRITES;
 		fbiinit4 |= SLOW_PCI_READS;
@@ -1327,7 +1261,7 @@ static void  __devexit sst_shutdown(struct fb_info *info)
 	/* TODO maybe shutdown the dac, vrefresh and so on... */
 	pci_write_config_dword(dev, PCI_INIT_ENABLE,
 	                       PCI_EN_INIT_WR);
-	sst_unset_bits(FBIINIT0, FBI_RESET | FIFO_RESET | EN_VGA_PASSTHROUGH);
+	sst_unset_bits(FBIINIT0, FBI_RESET | FIFO_RESET | DIS_VGA_PASSTHROUGH);
 	pci_write_config_dword(dev, PCI_VCLK_DISABLE,0);
 	/* maybe keep fbiinit* and PCI_INIT_enable in the fb_info struct
 	 * from start ? */
@@ -1338,8 +1272,7 @@ static void  __devexit sst_shutdown(struct fb_info *info)
 /*
  * Interface to the world
  */
-#ifndef MODULE
-static int  __init sstfb_setup(char *options)
+static int  __devinit sstfb_setup(char *options)
 {
 	char *this_opt;
 
@@ -1372,7 +1305,7 @@ static int  __init sstfb_setup(char *options)
 	}
 	return 0;
 }
-#endif
+
 
 static struct fb_ops sstfb_ops = {
 	.owner		= THIS_MODULE,
@@ -1396,7 +1329,7 @@ static int __devinit sstfb_probe(struct pci_dev *pdev,
 
 	/* Enable device in PCI config. */
 	if ((err=pci_enable_device(pdev))) {
-		eprintk("cannot enable device\n");
+		printk(KERN_ERR "cannot enable device\n");
 		return err;
 	}
 
@@ -1422,39 +1355,39 @@ static int __devinit sstfb_probe(struct pci_dev *pdev,
 	fix->smem_start = fix->mmio_start + 0x400000;
 
 	if (!request_mem_region(fix->mmio_start, fix->mmio_len, "sstfb MMIO")) {
-		eprintk("cannot reserve mmio memory\n");
+		printk(KERN_ERR "sstfb: cannot reserve mmio memory\n");
 		goto fail_mmio_mem;
 	}
 
 	if (!request_mem_region(fix->smem_start, 0x400000,"sstfb FB")) {
-		eprintk("cannot reserve fb memory\n");
+		printk(KERN_ERR "sstfb: cannot reserve fb memory\n");
 		goto fail_fb_mem;
 	}
 
 	par->mmio_vbase = ioremap_nocache(fix->mmio_start,
 					fix->mmio_len);
 	if (!par->mmio_vbase) {
-		eprintk("cannot remap register area %#lx\n",
+		printk(KERN_ERR "sstfb: cannot remap register area %#lx\n",
 		        fix->mmio_start);
 		goto fail_mmio_remap;
 	}
 	info->screen_base = ioremap_nocache(fix->smem_start, 0x400000);
 	if (!info->screen_base) {
-		eprintk("cannot remap framebuffer %#lx\n",
+		printk(KERN_ERR "sstfb: cannot remap framebuffer %#lx\n",
 		        fix->smem_start);
 		goto fail_fb_remap;
 	}
 
 	if (!sst_init(info, par)) {
-		eprintk("Init failed\n");
+		printk(KERN_ERR "sstfb: Init failed\n");
 		goto fail;
 	}
 	sst_get_memsize(info, &fix->smem_len);
 	strlcpy(fix->id, spec->name, sizeof(fix->id));
 
-	iprintk("%s (revision %d) with %s dac\n",
+	printk(KERN_INFO "%s (revision %d) with %s dac\n",
 		fix->id, par->revision, par->dac_sw.name);
-	iprintk("framebuffer at %#lx, mapped to 0x%p, size %dMB\n",
+	printk(KERN_INFO "framebuffer at %#lx, mapped to 0x%p, size %dMB\n",
 	        fix->smem_start, info->screen_base,
 	        fix->smem_len >> 20);
 
@@ -1471,24 +1404,20 @@ static int __devinit sstfb_probe(struct pci_dev *pdev,
 	fix->accel	= FB_ACCEL_NONE;  /* FIXME */
 	/*
 	 * According to the specs, the linelength must be of 1024 *pixels*
-	 * and the 24bpp mode is in fact a 32 bpp mode.
+	 * and the 24bpp mode is in fact a 32 bpp mode (and both are in
+	 * fact dithered to 16bit).
 	 */
 	fix->line_length = 2048; /* default value, for 24 or 32bit: 4096 */
 	
-	if ( mode_option &&
-	     fb_find_mode(&info->var, info, mode_option, NULL, 0, NULL, 16)) {
-		eprintk("can't set supplied video mode. Using default\n");
-		info->var = sstfb_default;
-	} else
-		info->var = sstfb_default;
+	fb_find_mode(&info->var, info, mode_option, NULL, 0, NULL, 16);
 
 	if (sstfb_check_var(&info->var, info)) {
-		eprintk("invalid default video mode.\n");
+		printk(KERN_ERR "sstfb: invalid video mode.\n");
 		goto fail;
 	}
 
 	if (sstfb_set_par(info)) {
-		eprintk("can't set default video mode.\n");
+		printk(KERN_ERR "sstfb: can't set default video mode.\n");
 		goto fail;
 	}
 	
@@ -1497,14 +1426,15 @@ static int __devinit sstfb_probe(struct pci_dev *pdev,
 	/* register fb */
 	info->device = &pdev->dev;
 	if (register_framebuffer(info) < 0) {
-		eprintk("can't register framebuffer.\n");
+		printk(KERN_ERR "sstfb: can't register framebuffer.\n");
 		goto fail;
 	}
 
-	if (1) /* set to 0 to see an initial bitmap instead */
-		sstfb_clear_screen(info);
-	else
-		sstfb_drawdebugimage(info);
+	sstfb_clear_screen(info);
+
+	if (device_create_file(info->dev, &device_attrs[0]))
+		printk(KERN_WARNING "sstfb: can't create sysfs entry.\n");
+
 
 	printk(KERN_INFO "fb%d: %s frame buffer device at 0x%p\n",
 	       info->node, fix->id, info->screen_base);
@@ -1512,6 +1442,7 @@ static int __devinit sstfb_probe(struct pci_dev *pdev,
 	return 0;
 
 fail:
+	fb_dealloc_cmap(&info->cmap);
 	iounmap(info->screen_base);
 fail_fb_remap:
 	iounmap(par->mmio_vbase);
@@ -1532,21 +1463,23 @@ static void __devexit sstfb_remove(struct pci_dev *pdev)
 	info = pci_get_drvdata(pdev);
 	par = info->par;
 	
+	device_remove_file(info->dev, &device_attrs[0]);
 	sst_shutdown(info);
-	unregister_framebuffer(info);
 	iounmap(info->screen_base);
 	iounmap(par->mmio_vbase);
 	release_mem_region(info->fix.smem_start, 0x400000);
 	release_mem_region(info->fix.mmio_start, info->fix.mmio_len);
+	fb_dealloc_cmap(&info->cmap);
+	unregister_framebuffer(info);
 	framebuffer_release(info);
 }
 
 
-static struct pci_device_id sstfb_id_tbl[] = {
-	{ PCI_VENDOR_ID_3DFX, PCI_DEVICE_ID_3DFX_VOODOO,
-	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, ID_VOODOO1 },
-	{ PCI_VENDOR_ID_3DFX, PCI_DEVICE_ID_3DFX_VOODOO2,
-	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, ID_VOODOO2 },
+static const struct pci_device_id sstfb_id_tbl[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_3DFX, PCI_DEVICE_ID_3DFX_VOODOO ),
+		.driver_data = ID_VOODOO1, },
+	{ PCI_DEVICE(PCI_VENDOR_ID_3DFX, PCI_DEVICE_ID_3DFX_VOODOO2),
+		.driver_data = ID_VOODOO2, },
 	{ 0 },
 };
 
@@ -1560,142 +1493,23 @@ static struct pci_driver sstfb_driver = {
 
 static int __devinit sstfb_init(void)
 {
-#ifndef MODULE
 	char *option = NULL;
 
 	if (fb_get_options("sstfb", &option))
 		return -ENODEV;
 	sstfb_setup(option);
-#endif
+
 	return pci_register_driver(&sstfb_driver);
 }
 
-#ifdef MODULE
 static void __devexit sstfb_exit(void)
 {
 	pci_unregister_driver(&sstfb_driver);
 }
-#endif
 
 
-/*
- * testing and debugging functions
- */
-
-static int sstfb_dump_regs(struct fb_info *info)
-{
-#ifdef SST_DEBUG
-	static struct { u32 reg ; const char *reg_name;}  pci_regs[] = {
-		{ PCI_INIT_ENABLE, "initenable"},
-		{ PCI_VCLK_ENABLE, "enable vclk"},
-		{ PCI_VCLK_DISABLE, "disable vclk"},
-	};
-
-	static struct { u32 reg ; const char *reg_name;}  sst_regs[] = {
-		{FBIINIT0,"fbiinit0"},
-		{FBIINIT1,"fbiinit1"},
-		{FBIINIT2,"fbiinit2"},
-		{FBIINIT3,"fbiinit3"},
-		{FBIINIT4,"fbiinit4"},
-		{FBIINIT5,"fbiinit5"},
-		{FBIINIT6,"fbiinit6"},
-		{FBIINIT7,"fbiinit7"},
-		{LFBMODE,"lfbmode"},
-		{FBZMODE,"fbzmode"},
-	};
-
-	const int pci_s = ARRAY_SIZE(pci_regs);
-	const int sst_s = ARRAY_SIZE(sst_regs);
-	struct sstfb_par *par = info->par;
-	struct pci_dev *dev = par->dev;
-	u32 pci_res[pci_s];
-	u32 sst_res[sst_s];
-	int i;
-
-	for (i=0; i<pci_s; i++) {
-		pci_read_config_dword(dev, pci_regs[i].reg, &pci_res[i]);
-	}
-	for (i=0; i<sst_s; i++) {
-		sst_res[i] = sst_read(sst_regs[i].reg);
-	}
-
-	dprintk("hardware register dump:\n");
-	for (i=0; i<pci_s; i++) {
-		dprintk("%s %0#10x\n", pci_regs[i].reg_name, pci_res[i]);
-	}
-	for (i=0; i<sst_s; i++) {
-		dprintk("%s %0#10x\n", sst_regs[i].reg_name, sst_res[i]);
-	}
-	return 0;
-#else
-	return -EINVAL;
-#endif
-}
-
-static void sstfb_fillrect_softw( struct fb_info *info, const struct fb_fillrect *rect)
-{
-	u8 __iomem *fbbase_virt = info->screen_base;
-	int x, y, w = info->var.bits_per_pixel == 16 ? 2 : 4;
-	u32 color = rect->color, height = rect->height;
-	u8 __iomem *p;
-	
-	if (w==2) color |= color<<16;
-	for (y=rect->dy; height; y++, height--) {
-		p = fbbase_virt + y*info->fix.line_length + rect->dx*w;
-		x = rect->width;
-		if (w==2) x>>=1;
-		while (x) {
-			writel(color, p);
-			p += 4;
-			x--;
-		}
-	}
-}
-
-static void sstfb_drawrect_XY( struct fb_info *info, int x, int y,
-		int w, int h, int color, int hwfunc)
-{
-	struct fb_fillrect rect;
-	rect.dx = x;
-	rect.dy = y;
-	rect.height = h;
-	rect.width = w;
-	rect.color = color;
-	rect.rop = ROP_COPY;
-	if (hwfunc)
-		sstfb_fillrect(info, &rect);
-	else
-		sstfb_fillrect_softw(info, &rect);
-}
-
-/* print some squares on the fb */
-static void sstfb_drawdebugimage(struct fb_info *info)
-{
-	static int idx;
-
-	/* clear screen */
-	sstfb_clear_screen(info);
-	
-   	idx = (idx+1) & 1;
-
-	/* white rect */
-	sstfb_drawrect_XY(info, 0, 0, 50, 50, 0xffff, idx);
-	
-	/* blue rect */
-	sstfb_drawrect_XY(info, 50, 50, 50, 50, 0x001f, idx);
-
-	/* green rect */
-	sstfb_drawrect_XY(info, 100, 100, 80, 80, 0x07e0, idx);
-	
-	/* red rect */
-	sstfb_drawrect_XY(info, 250, 250, 120, 100, 0xf800, idx);
-}
-
 module_init(sstfb_init);
-
-#ifdef MODULE
 module_exit(sstfb_exit);
-#endif
 
 MODULE_AUTHOR("(c) 2000,2002 Ghozlane Toumi <gtoumi@laposte.net>");
 MODULE_DESCRIPTION("FBDev driver for 3dfx Voodoo Graphics and Voodoo2 based video boards");
@@ -1711,4 +1525,6 @@ module_param(gfxclk, int, 0);
 MODULE_PARM_DESC(gfxclk, "Force graphic chip frequency in MHz. DANGEROUS. (default=auto)");
 module_param(slowpci, bool, 0);
 MODULE_PARM_DESC(slowpci, "Uses slow PCI settings (0 or 1) (default=0)");
+module_param(mode_option, charp, 0);
+MODULE_PARM_DESC(mode_option, "Initial video mode (default=" DEFAULT_VIDEO_MODE ")");