X-Git-Url: http://ftp.safe.ca/?a=blobdiff_plain;f=drivers%2Fvideo%2FKconfig;h=fb9d8d0b2c0452250b85c63b9aa23b0024f8e60f;hb=01dd2fbf0da4019c380b6ca22a074538fb31db5a;hp=45fe65d8d7a03d91de405314f052ac377fae2cb5;hpb=9084b0058e11378abb43d01e669bac8ac7b593ff;p=safe%2Fjmp%2Flinux-2.6 diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index 45fe65d..fb9d8d0 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -3,23 +3,23 @@ # menu "Graphics support" + depends on HAS_IOMEM -config FIRMWARE_EDID - bool "Enable firmware EDID" - default y - ---help--- - This enables access to the EDID transferred from the firmware. - On the i386, this is from the Video BIOS. Enable this if DDC/I2C - transfers do not work for your driver and if you are using - nvidiafb, i810fb or savagefb. +source "drivers/char/agp/Kconfig" - In general, choosing Y for this option is safe. If you - experience extremely long delays while booting before you get - something on your display, try setting this to N. Matrox cards in - combination with certain motherboards and monitors are known to - suffer from this problem. +source "drivers/char/drm/Kconfig" + +config VGASTATE + tristate + default n + +config VIDEO_OUTPUT_CONTROL + tristate "Lowlevel video output switch controls" + help + This framework adds support for low-level control of the video + output switch. -config FB +menuconfig FB tristate "Support for frame buffer devices" ---help--- The frame buffer device provides an abstraction for the graphics @@ -53,9 +53,27 @@ config FB (e.g. an accelerated X server) and that are not frame buffer device-aware may cause unexpected results. If unsure, say N. +config FIRMWARE_EDID + bool "Enable firmware EDID" + depends on FB + default n + ---help--- + This enables access to the EDID transferred from the firmware. + On the i386, this is from the Video BIOS. Enable this if DDC/I2C + transfers do not work for your driver and if you are using + nvidiafb, i810fb or savagefb. + + In general, choosing Y for this option is safe. If you + experience extremely long delays while booting before you get + something on your display, try setting this to N. Matrox cards in + combination with certain motherboards and monitors are known to + suffer from this problem. + config FB_DDC tristate - depends on FB && I2C && I2C_ALGOBIT + depends on FB + select I2C_ALGOBIT + select I2C default n config FB_CFB_FILLRECT @@ -85,6 +103,60 @@ config FB_CFB_IMAGEBLIT blitting. This is used by drivers that don't provide their own (accelerated) version. +config FB_CFB_REV_PIXELS_IN_BYTE + bool + depends on FB + default n + ---help--- + Allow generic frame-buffer functions to work on displays with 1, 2 + and 4 bits per pixel depths which has opposite order of pixels in + byte order to bytes in long order. + +config FB_SYS_FILLRECT + tristate + depends on FB + default n + ---help--- + Include the sys_fillrect function for generic software rectangle + filling. This is used by drivers that don't provide their own + (accelerated) version and the framebuffer is in system RAM. + +config FB_SYS_COPYAREA + tristate + depends on FB + default n + ---help--- + Include the sys_copyarea function for generic software area copying. + This is used by drivers that don't provide their own (accelerated) + version and the framebuffer is in system RAM. + +config FB_SYS_IMAGEBLIT + tristate + depends on FB + default n + ---help--- + Include the sys_imageblit function for generic software image + blitting. This is used by drivers that don't provide their own + (accelerated) version and the framebuffer is in system RAM. + +config FB_SYS_FOPS + tristate + depends on FB + default n + +config FB_DEFERRED_IO + bool + depends on FB + default y + +config FB_SVGALIB + tristate + depends on FB + default n + ---help--- + Common utility functions useful to fbdev drivers of VGA-based + cards. + config FB_MACMODES tristate depends on FB @@ -126,6 +198,9 @@ config FB_TILEBLITTING This is particularly important to one driver, matroxfb. If unsure, say N. +comment "Frame buffer hardware drivers" + depends on FB + config FB_CIRRUS tristate "Cirrus Logic support" depends on FB && (ZORRO || PCI) @@ -175,7 +250,7 @@ config FB_ARMCLCD If you want to compile this as a module (=code which can be inserted into and removed from the running kernel), say M - here and read . The module + here and read . The module will be called amba-clcd. choice @@ -346,42 +421,6 @@ config FB_AMIGA_AGA and CD32. If you intend to run Linux on any of these systems, say Y; otherwise say N. -config FB_CYBER - tristate "Amiga CyberVision 64 support" - depends on FB && ZORRO && BROKEN - select FB_CFB_FILLRECT - select FB_CFB_COPYAREA - select FB_CFB_IMAGEBLIT - help - This enables support for the Cybervision 64 graphics card from - Phase5. Please note that its use is not all that intuitive (i.e. if - you have any questions, be sure to ask!). Say N unless you have a - Cybervision 64 or plan to get one before you next recompile the - kernel. Please note that this driver DOES NOT support the - Cybervision 64/3D card, as they use incompatible video chips. - -config FB_VIRGE - bool "Amiga CyberVision 64/3D support " - depends on (FB = y) && ZORRO && BROKEN - select FB_CFB_FILLRECT - select FB_CFB_COPYAREA - select FB_CFB_IMAGEBLIT - help - This enables support for the Cybervision 64/3D graphics card from - Phase5. Please note that its use is not all that intuitive (i.e. if - you have any questions, be sure to ask!). Say N unless you have a - Cybervision 64/3D or plan to get one before you next recompile the - kernel. Please note that this driver DOES NOT support the older - Cybervision 64 card, as they use incompatible video chips. - -config FB_RETINAZ3 - tristate "Amiga Retina Z3 support" - depends on (FB = y) && ZORRO && BROKEN - help - This enables support for the Retina Z3 graphics card. Say N unless - you have a Retina Z3 or plan to get one before you next recompile - the kernel. - config FB_FM2 bool "Amiga FrameMaster II/Rainbow II support" depends on (FB = y) && ZORRO @@ -395,9 +434,10 @@ config FB_FM2 config FB_ARC tristate "Arc Monochrome LCD board support" depends on FB && X86 - select FB_CFB_FILLRECT - select FB_CFB_COPYAREA - select FB_CFB_IMAGEBLIT + select FB_SYS_FILLRECT + select FB_SYS_COPYAREA + select FB_SYS_IMAGEBLIT + select FB_SYS_FOPS help This enables support for the Arc Monochrome LCD board. The board is based on the KS-108 lcd controller and is typically a matrix @@ -409,14 +449,17 @@ config FB_ARC config FB_ATARI bool "Atari native chipset support" - depends on (FB = y) && ATARI && BROKEN + depends on (FB = y) && ATARI + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This is the frame buffer device driver for the builtin graphics chipset found in Ataris. config FB_OF bool "Open Firmware frame buffer device support" - depends on (FB = y) && (PPC64 || PPC_OF) + depends on (FB = y) && (PPC64 || PPC_OF) && (!PPC_PSERIES || PCI) select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT @@ -492,6 +535,8 @@ config FB_VGA16 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select VGASTATE + select FONT_8x16 if FRAMEBUFFER_CONSOLE help This is the frame buffer device driver for VGA 16 color graphic cards. Say Y if you have such a card. @@ -499,6 +544,15 @@ config FB_VGA16 To compile this driver as a module, choose M here: the module will be called vga16fb. +config FB_BF54X_LQ043 + tristate "SHARP LQ043 TFT LCD (BF548 EZKIT)" + depends on FB && (BF54x) + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + help + This is the framebuffer device driver for a SHARP LQ043T1DG01 TFT LCD + config FB_STI tristate "HP STI frame buffer device support" depends on FB && PARISC @@ -536,15 +590,43 @@ config FB_HP300 default y config FB_TGA - tristate "TGA framebuffer support" - depends on FB && ALPHA + tristate "TGA/SFB+ framebuffer support" + depends on FB && (ALPHA || TC) select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT select BITREVERSE + ---help--- + This is the frame buffer device driver for generic TGA and SFB+ + graphic cards. These include DEC ZLXp-E1, -E2 and -E3 PCI cards, + also known as PBXGA-A, -B and -C, and DEC ZLX-E1, -E2 and -E3 + TURBOchannel cards, also known as PMAGD-A, -B and -C. + + Due to hardware limitations ZLX-E2 and E3 cards are not supported + for DECstation 5000/200 systems. Additionally due to firmware + limitations these cards may cause troubles with booting DECstation + 5000/240 and /260 systems, but are fully supported under Linux if + you manage to get it going. ;-) + + Say Y if you have one of those. + +config FB_UVESA + tristate "Userspace VESA VGA graphics support" + depends on FB && CONNECTOR + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + select FB_MODE_HELPERS help - This is the frame buffer device driver for generic TGA graphic - cards. Say Y if you have one of those. + This is the frame buffer driver for generic VBE 2.0 compliant + graphic cards. It can also take advantage of VBE 3.0 features, + such as refresh rate adjustment. + + This driver generally provides more features than vesafb but + requires a userspace helper application called 'v86d'. See + for more information. + + If unsure, say N. config FB_VESA bool "VESA VGA graphics support" @@ -568,6 +650,21 @@ config FB_IMAC help This is the frame buffer device driver for the Intel-based Macintosh +config FB_HECUBA + tristate "Hecuba board support" + depends on FB && X86 && MMU + select FB_SYS_FILLRECT + select FB_SYS_COPYAREA + select FB_SYS_IMAGEBLIT + select FB_SYS_FOPS + select FB_DEFERRED_IO + help + This enables support for the Hecuba board. This driver was tested + with an E-Ink 800x600 display and x86 SBCs through a 16 bit GPIO + interface (8 bit data, 4 bit control). If you anticipate using + this driver, say Y or M; otherwise say N. You must specify the + GPIO IO address to be used for setting control and data. + config FB_HGA tristate "Hercules mono graphics support" depends on FB && X86 @@ -617,10 +714,6 @@ config FB_GBE_MEM This is the amount of memory reserved for the framebuffer, which can be any value between 1MB and 8MB. -config FB_SUN3 - bool "Sun3 framebuffer support" - depends on (FB = y) && (SUN3 || SUN3X) && BROKEN - config FB_SBUS bool "SBUS and UPA framebuffers" depends on (FB = y) && SPARC @@ -629,7 +722,7 @@ config FB_SBUS config FB_BW2 bool "BWtwo support" - depends on (FB = y) && (SPARC && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3) + depends on (FB = y) && (SPARC && FB_SBUS) select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT @@ -638,7 +731,7 @@ config FB_BW2 config FB_CG3 bool "CGthree support" - depends on (FB = y) && (SPARC && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3) + depends on (FB = y) && (SPARC && FB_SBUS) select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT @@ -647,13 +740,98 @@ config FB_CG3 config FB_CG6 bool "CGsix (GX,TurboGX) support" - depends on (FB = y) && (SPARC && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3) + depends on (FB = y) && (SPARC && FB_SBUS) select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT help This is the frame buffer device driver for the CGsix (GX, TurboGX) frame buffer. +config FB_FFB + bool "Creator/Creator3D/Elite3D support" + depends on FB_SBUS && SPARC64 + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + help + This is the frame buffer device driver for the Creator, Creator3D, + and Elite3D graphics boards. + +config FB_TCX + bool "TCX (SS4/SS5 only) support" + depends on FB_SBUS + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + help + This is the frame buffer device driver for the TCX 24/8bit frame + buffer. + +config FB_CG14 + bool "CGfourteen (SX) support" + depends on FB_SBUS + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + help + This is the frame buffer device driver for the CGfourteen frame + buffer on Desktop SPARCsystems with the SX graphics option. + +config FB_P9100 + bool "P9100 (Sparcbook 3 only) support" + depends on FB_SBUS + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + help + This is the frame buffer device driver for the P9100 card + supported on Sparcbook 3 machines. + +config FB_LEO + bool "Leo (ZX) support" + depends on FB_SBUS + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + help + This is the frame buffer device driver for the SBUS-based Sun ZX + (leo) frame buffer cards. + +config FB_IGA + bool "IGA 168x display support" + depends on (FB = y) && SPARC32 + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + help + This is the framebuffer device for the INTERGRAPHICS 1680 and + successor frame buffer cards. + +config FB_XVR500 + bool "Sun XVR-500 3DLABS Wildcat support" + depends on (FB = y) && PCI && SPARC64 + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + help + This is the framebuffer device for the Sun XVR-500 and similar + graphics cards based upon the 3DLABS Wildcat chipset. The driver + only works on sparc64 systems where the system firmware has + mostly initialized the card already. It is treated as a + completely dumb framebuffer device. + +config FB_XVR2500 + bool "Sun XVR-2500 3DLABS Wildcat support" + depends on (FB = y) && PCI && SPARC64 + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + help + This is the framebuffer device for the Sun XVR-2500 and similar + graphics cards based upon the 3DLABS Wildcat chipset. The driver + only works on sparc64 systems where the system firmware has + mostly initialized the card already. It is treated as a + completely dumb framebuffer device. + config FB_PVR2 tristate "NEC PowerVR 2 display support" depends on FB && SH_DREAMCAST @@ -677,7 +855,7 @@ config FB_PVR2 config FB_EPSON1355 bool "Epson 1355 framebuffer support" - depends on (FB = y) && (SUPERH || ARCH_CEIVA) + depends on (FB = y) && ARCH_CEIVA select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT @@ -698,16 +876,42 @@ config FB_S1D13XXX working with S1D13806). Product specs at +config FB_ATMEL + tristate "AT91/AT32 LCD Controller support" + depends on FB && (ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || AVR32) + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + help + This enables support for the AT91/AT32 LCD Controller. + +config FB_INTSRAM + bool "Frame Buffer in internal SRAM" + depends on FB_ATMEL && ARCH_AT91SAM9261 + help + Say Y if you want to map Frame Buffer in internal SRAM. Say N if you want + to let frame buffer in external SDRAM. + +config FB_ATMEL_STN + bool "Use a STN display with AT91/AT32 LCD Controller" + depends on FB_ATMEL && MACH_AT91SAM9261EK + default n + help + Say Y if you want to connect a STN LCD display to the AT91/AT32 LCD + Controller. Say N if you want to connect a TFT. + + If unsure, say N. + config FB_NVIDIA tristate "nVidia Framebuffer Support" depends on FB && PCI - select I2C_ALGOBIT if FB_NVIDIA_I2C - select I2C if FB_NVIDIA_I2C + select FB_BACKLIGHT if FB_NVIDIA_BACKLIGHT select FB_MODE_HELPERS select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT select BITREVERSE + select VGASTATE help This driver supports graphics boards with the nVidia chips, TNT and newer. For very old chipsets, such as the RIVA128, then use @@ -720,6 +924,7 @@ config FB_NVIDIA config FB_NVIDIA_I2C bool "Enable DDC Support" depends on FB_NVIDIA + select FB_DDC help This enables I2C support for nVidia Chipsets. This is used only for getting EDID information from the attached display @@ -729,10 +934,18 @@ config FB_NVIDIA_I2C independently validate video mode parameters, you should say Y here. +config FB_NVIDIA_DEBUG + bool "Lots of debug output" + depends on FB_NVIDIA + default n + help + Say Y here if you want the nVidia driver to output all sorts + of debugging information to provide to the maintainer when + something goes wrong. + config FB_NVIDIA_BACKLIGHT bool "Support for backlight control" - depends on FB_NVIDIA && PMAC_BACKLIGHT - select FB_BACKLIGHT + depends on FB_NVIDIA default y help Say Y here if you want to control the backlight of your display. @@ -740,14 +953,13 @@ config FB_NVIDIA_BACKLIGHT config FB_RIVA tristate "nVidia Riva support" depends on FB && PCI - select I2C_ALGOBIT if FB_RIVA_I2C - select I2C if FB_RIVA_I2C - select FB_DDC if FB_RIVA_I2C + select FB_BACKLIGHT if FB_RIVA_BACKLIGHT select FB_MODE_HELPERS select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT select BITREVERSE + select VGASTATE help This driver supports graphics boards with the nVidia Riva/Geforce chips. @@ -759,6 +971,7 @@ config FB_RIVA config FB_RIVA_I2C bool "Enable DDC Support" depends on FB_RIVA + select FB_DDC help This enables I2C support for nVidia Chipsets. This is used only for getting EDID information from the attached display @@ -769,7 +982,7 @@ config FB_RIVA_I2C here. config FB_RIVA_DEBUG - bool "Lots of debug output from Riva(nVidia) driver" + bool "Lots of debug output" depends on FB_RIVA default n help @@ -779,8 +992,7 @@ config FB_RIVA_DEBUG config FB_RIVA_BACKLIGHT bool "Support for backlight control" - depends on FB_RIVA && PMAC_BACKLIGHT - select FB_BACKLIGHT + depends on FB_RIVA default y help Say Y here if you want to control the backlight of your display. @@ -794,6 +1006,7 @@ config FB_I810 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select VGASTATE help This driver supports the on-board graphics built in to the Intel 810 and 815 chipsets. Say Y if you have and plan to use such a board. @@ -830,18 +1043,30 @@ config FB_I810_GTF config FB_I810_I2C bool "Enable DDC Support" depends on FB_I810 && FB_I810_GTF - select I2C - select I2C_ALGOBIT select FB_DDC help +config FB_LE80578 + tristate "Intel LE80578 (Vermilion) support" + depends on FB && PCI && X86 + select FB_MODE_HELPERS + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + help + This driver supports the LE80578 (Vermilion Range) chipset + +config FB_CARILLO_RANCH + tristate "Intel Carillo Ranch support" + depends on FB_LE80578 && FB && PCI && X86 + help + This driver supports the LE80578 (Carillo Ranch) board + config FB_INTEL tristate "Intel 830M/845G/852GM/855GM/865G/915G/945G support (EXPERIMENTAL)" depends on FB && EXPERIMENTAL && PCI && X86 select AGP select AGP_INTEL - select I2C_ALGOBIT if FB_INTEL_I2C - select I2C if FB_INTEL_I2C select FB_MODE_HELPERS select FB_CFB_FILLRECT select FB_CFB_COPYAREA @@ -874,6 +1099,7 @@ config FB_INTEL_DEBUG config FB_INTEL_I2C bool "DDC/I2C for Intel framebuffer support" depends on FB_INTEL + select FB_DDC default y help Say Y here if you want DDC/I2C support for your on-board Intel graphics. @@ -952,8 +1178,8 @@ config FB_MATROX_G config FB_MATROX_I2C tristate "Matrox I2C support" - depends on FB_MATROX && I2C - select I2C_ALGOBIT + depends on FB_MATROX + select FB_DDC ---help--- This drivers creates I2C buses which are needed for accessing the DDC (I2C) bus present on all Matroxes, an I2C bus which @@ -1021,9 +1247,7 @@ config FB_MATROX_MULTIHEAD config FB_RADEON tristate "ATI Radeon display support" depends on FB && PCI - select I2C_ALGOBIT if FB_RADEON_I2C - select I2C if FB_RADEON_I2C - select FB_DDC if FB_RADEON_I2C + select FB_BACKLIGHT if FB_RADEON_BACKLIGHT select FB_MODE_HELPERS select FB_CFB_FILLRECT select FB_CFB_COPYAREA @@ -1047,14 +1271,14 @@ config FB_RADEON config FB_RADEON_I2C bool "DDC/I2C for ATI Radeon support" depends on FB_RADEON + select FB_DDC default y help Say Y here if you want DDC/I2C support for your Radeon board. config FB_RADEON_BACKLIGHT bool "Support for backlight control" - depends on FB_RADEON && PMAC_BACKLIGHT - select FB_BACKLIGHT + depends on FB_RADEON default y help Say Y here if you want to control the backlight of your display. @@ -1074,6 +1298,7 @@ config FB_ATY128 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select FB_BACKLIGHT if FB_ATY128_BACKLIGHT select FB_MACMODES if PPC_PMAC help This driver supports graphics boards with the ATI Rage128 chips. @@ -1085,8 +1310,7 @@ config FB_ATY128 config FB_ATY128_BACKLIGHT bool "Support for backlight control" - depends on FB_ATY128 && PMAC_BACKLIGHT - select FB_BACKLIGHT + depends on FB_ATY128 default y help Say Y here if you want to control the backlight of your display. @@ -1097,6 +1321,7 @@ config FB_ATY select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select FB_BACKLIGHT if FB_ATY_BACKLIGHT select FB_MACMODES if PPC help This driver supports graphics boards with the ATI Mach64 chips. @@ -1108,7 +1333,7 @@ config FB_ATY config FB_ATY_CT bool "Mach64 CT/VT/GT/LT (incl. 3D RAGE) support" depends on PCI && FB_ATY - default y if SPARC64 && FB_PCI + default y if SPARC64 && PCI help Say Y here to support use of ATI's 64-bit Rage boards (or other boards based on the Mach64 CT, VT, GT, and LT chipsets) as a @@ -1135,28 +1360,32 @@ config FB_ATY_GX config FB_ATY_BACKLIGHT bool "Support for backlight control" - depends on FB_ATY && PMAC_BACKLIGHT - select FB_BACKLIGHT + depends on FB_ATY default y help Say Y here if you want to control the backlight of your display. -config FB_S3TRIO - bool "S3 Trio display support" - depends on (FB = y) && PPC && BROKEN - help - If you have a S3 Trio say Y. Say N for S3 Virge. +config FB_S3 + tristate "S3 Trio/Virge support" + depends on FB && PCI + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + select FB_TILEBLITTING + select FB_SVGALIB + select VGASTATE + select FONT_8x16 if FRAMEBUFFER_CONSOLE + ---help--- + Driver for graphics boards with S3 Trio / S3 Virge chip. config FB_SAVAGE tristate "S3 Savage support" depends on FB && PCI && EXPERIMENTAL - select I2C_ALGOBIT if FB_SAVAGE_I2C - select I2C if FB_SAVAGE_I2C - select FB_DDC if FB_SAVAGE_I2C select FB_MODE_HELPERS select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select VGASTATE help This driver supports notebooks and computers with S3 Savage PCI/AGP chips. @@ -1169,6 +1398,7 @@ config FB_SAVAGE config FB_SAVAGE_I2C bool "Enable DDC2 Support" depends on FB_SAVAGE + select FB_DDC help This enables I2C support for S3 Savage Chipsets. This is used only for getting EDID information from the attached display @@ -1222,6 +1452,7 @@ config FB_NEOMAGIC select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select VGASTATE help This driver supports notebooks with NeoMagic PCI chips. Say Y if you have such a graphics card. @@ -1281,6 +1512,20 @@ config FB_VOODOO1 Please read the for supported options and other important info support. +config FB_VT8623 + tristate "VIA VT8623 support" + depends on FB && PCI + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + select FB_TILEBLITTING + select FB_SVGALIB + select VGASTATE + select FONT_8x16 if FRAMEBUFFER_CONSOLE + ---help--- + Driver for CastleRock integrated graphics core in the + VIA VT8623 [Apollo CLE266] chipset. + config FB_CYBLA tristate "Cyberblade/i1 support" depends on FB && PCI && X86_32 && !64BIT @@ -1334,9 +1579,26 @@ config FB_TRIDENT_ACCEL This will compile the Trident frame buffer device with acceleration functions. +config FB_ARK + tristate "ARK 2000PV support" + depends on FB && PCI + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + select FB_TILEBLITTING + select FB_SVGALIB + select VGASTATE + select FONT_8x16 if FRAMEBUFFER_CONSOLE + ---help--- + Driver for PCI graphics boards with ARK 2000PV chip + and ICS 5342 RAMDAC. + config FB_PM3 - tristate "Permedia3 support" - depends on FB && PCI && BROKEN + tristate "Permedia3 support (EXPERIMENTAL)" + depends on FB && PCI && EXPERIMENTAL + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This is the frame buffer device driver for the 3DLabs Permedia3 chipset, used in Formac ProFormance III, 3DLabs Oxygen VX1 & @@ -1345,11 +1607,18 @@ config FB_PM3 config FB_AU1100 bool "Au1100 LCD Driver" - depends on (FB = y) && EXPERIMENTAL && PCI && MIPS && MIPS_PB1100=y + depends on (FB = y) && MIPS && SOC_AU1100 + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + help + This is the framebuffer driver for the AMD Au1100 SOC. It can drive + various panels and CRTs by passing in kernel cmd line option + au1100fb:panel=. config FB_AU1200 bool "Au1200 LCD Driver" - depends on FB && MIPS && SOC_AU1200 + depends on (FB = y) && MIPS && SOC_AU1200 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT @@ -1360,69 +1629,6 @@ config FB_AU1200 source "drivers/video/geode/Kconfig" -config FB_FFB - bool "Creator/Creator3D/Elite3D support" - depends on FB_SBUS && SPARC64 - select FB_CFB_COPYAREA - select FB_CFB_IMAGEBLIT - help - This is the frame buffer device driver for the Creator, Creator3D, - and Elite3D graphics boards. - -config FB_TCX - bool "TCX (SS4/SS5 only) support" - depends on FB_SBUS - select FB_CFB_FILLRECT - select FB_CFB_COPYAREA - select FB_CFB_IMAGEBLIT - help - This is the frame buffer device driver for the TCX 24/8bit frame - buffer. - -config FB_CG14 - bool "CGfourteen (SX) support" - depends on FB_SBUS - select FB_CFB_FILLRECT - select FB_CFB_COPYAREA - select FB_CFB_IMAGEBLIT - help - This is the frame buffer device driver for the CGfourteen frame - buffer on Desktop SPARCsystems with the SX graphics option. - -config FB_P9100 - bool "P9100 (Sparcbook 3 only) support" - depends on FB_SBUS - select FB_CFB_FILLRECT - select FB_CFB_COPYAREA - select FB_CFB_IMAGEBLIT - help - This is the frame buffer device driver for the P9100 card - supported on Sparcbook 3 machines. - -config FB_LEO - bool "Leo (ZX) support" - depends on FB_SBUS - select FB_CFB_FILLRECT - select FB_CFB_COPYAREA - select FB_CFB_IMAGEBLIT - help - This is the frame buffer device driver for the SBUS-based Sun ZX - (leo) frame buffer cards. - -config FB_PCI - bool "PCI framebuffers" - depends on (FB = y) && PCI && SPARC - -config FB_IGA - bool "IGA 168x display support" - depends on SPARC32 && FB_PCI - select FB_CFB_FILLRECT - select FB_CFB_COPYAREA - select FB_CFB_IMAGEBLIT - help - This is the framebuffer device for the INTERGRAPHICS 1680 and - successor frame buffer cards. - config FB_HIT tristate "HD64461 Frame Buffer support" depends on FB && HD64461 @@ -1455,7 +1661,7 @@ config FB_PMAG_BA config FB_PMAGB_B tristate "PMAGB-B TURBOchannel framebuffer support" - depends on TC + depends on FB && TC select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT @@ -1475,18 +1681,6 @@ config FB_MAXINE DECstation series (Personal DECstation 5000/20, /25, /33, /50, Codename "Maxine"). -config FB_TX3912 - bool "TMPTX3912/PR31700 frame buffer support" - depends on (FB = y) && NINO - select FB_CFB_FILLRECT - select FB_CFB_COPYAREA - select FB_CFB_IMAGEBLIT - help - The TX3912 is a Toshiba RISC processor based on the MIPS 3900 core - see . - - Say Y here to enable kernel support for the on-board framebuffer. - config FB_G364 bool "G364 frame buffer support" depends on (FB = y) && (MIPS_MAGNUM_4000 || OLIVETTI_M700) @@ -1499,7 +1693,7 @@ config FB_G364 config FB_68328 bool "Motorola 68328 native frame buffer support" - depends on FB && (M68328 || M68EZ328 || M68VZ328) + depends on (FB = y) && (M68328 || M68EZ328 || M68VZ328) select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT @@ -1520,7 +1714,7 @@ config FB_PXA This driver is also available as a module ( = code which can be inserted and removed from the running kernel whenever you want). The module will be called pxafb. If you want to compile it as a module, - say M here and read . + say M here and read . If unsure, say N. @@ -1573,7 +1767,7 @@ config FB_W100 This driver is also available as a module ( = code which can be inserted and removed from the running kernel whenever you want). The module will be called w100fb. If you want to compile it as a module, - say M here and read . + say M here and read . If unsure, say N. @@ -1590,7 +1784,7 @@ config FB_S3C2410 This driver is also available as a module ( = code which can be inserted and removed from the running kernel whenever you want). The module will be called s3c2410fb. If you want to compile it as a module, - say M here and read . + say M here and read . If unsure, say N. config FB_S3C2410_DEBUG @@ -1600,6 +1794,24 @@ config FB_S3C2410_DEBUG Turn on debugging messages. Note that you can set/unset at run time through sysfs +config FB_SM501 + tristate "Silicon Motion SM501 framebuffer support" + depends on FB && MFD_SM501 + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + ---help--- + Frame buffer driver for the CRT and LCD controllers in the Silicon + Motion SM501. + + This driver is also available as a module ( = code which can be + inserted and removed from the running kernel whenever you want). The + module will be called sm501fb. If you want to compile it as a module, + say M here and read . + + If unsure, say N. + + config FB_PNX4008_DUM tristate "Display Update Module support on Philips PNX4008 board" depends on FB && ARCH_PNX4008 @@ -1617,7 +1829,7 @@ config FB_PNX4008_DUM_RGB config FB_IBM_GXT4500 tristate "Framebuffer support for IBM GXT4500P adaptor" - depends on PPC + depends on FB && PPC select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT @@ -1625,13 +1837,46 @@ config FB_IBM_GXT4500 Say Y here to enable support for the IBM GXT4500P display adaptor, found on some IBM System P (pSeries) machines. -config FB_VIRTUAL - tristate "Virtual Frame Buffer support (ONLY FOR TESTING!)" - depends on FB +config FB_PS3 + tristate "PS3 GPU framebuffer driver" + depends on FB && PS3_PS3AV + select FB_SYS_FILLRECT + select FB_SYS_COPYAREA + select FB_SYS_IMAGEBLIT + select FB_SYS_FOPS + select VT_HW_CONSOLE_BINDING if FRAMEBUFFER_CONSOLE + ---help--- + Include support for the virtual frame buffer in the PS3 platform. + +config FB_PS3_DEFAULT_SIZE_M + int "PS3 default frame buffer size (in MiB)" + depends on FB_PS3 + default 9 + ---help--- + This is the default size (in MiB) of the virtual frame buffer in + the PS3. + The default value can be overridden on the kernel command line + using the "ps3fb" option (e.g. "ps3fb=9M"); + +config FB_XILINX + tristate "Xilinx frame buffer support" + depends on FB && XILINX_VIRTEX select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT ---help--- + Include support for the Xilinx ML300/ML403 reference design + framebuffer. ML300 carries a 640*480 LCD display on the board, + ML403 uses a standard DB15 VGA connector. + +config FB_VIRTUAL + tristate "Virtual Frame Buffer support (ONLY FOR TESTING!)" + depends on FB + select FB_SYS_FILLRECT + select FB_SYS_COPYAREA + select FB_SYS_IMAGEBLIT + select FB_SYS_FOPS + ---help--- This is a `virtual' frame buffer device. It operates on a chunk of unswappable kernel memory instead of on the memory of a graphics board. This means you cannot see any output sent to this frame @@ -1646,6 +1891,14 @@ config FB_VIRTUAL the vfb_enable=1 option. If unsure, say N. + +if ARCH_OMAP + source "drivers/video/omap/Kconfig" +endif + +source "drivers/video/backlight/Kconfig" +source "drivers/video/display/Kconfig" + if VT source "drivers/video/console/Kconfig" endif @@ -1654,9 +1907,4 @@ if FB || SGI_NEWPORT_CONSOLE source "drivers/video/logo/Kconfig" endif -if SYSFS - source "drivers/video/backlight/Kconfig" -endif - endmenu -