X-Git-Url: http://ftp.safe.ca/?a=blobdiff_plain;f=drivers%2Fvideo%2FKconfig;h=85d0e8707ee3df7831afa56f3fdd68faf1dd6a5f;hb=09aaf268eb1d22eee690d26a913f660e2081597f;hp=a3024eb28dc52f8ac21bd1ecdbec14e464e8305c;hpb=903e2bbda92e5a14f8050154046a14230abb800b;p=safe%2Fjmp%2Flinux-2.6 diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index a3024eb..85d0e87 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -4,6 +4,13 @@ menu "Graphics support" +source "drivers/video/backlight/Kconfig" +source "drivers/video/display/Kconfig" + +config VGASTATE + tristate + default n + config FB tristate "Support for frame buffer devices" ---help--- @@ -38,6 +45,29 @@ config FB (e.g. an accelerated X server) and that are not frame buffer device-aware may cause unexpected results. If unsure, say N. +config FIRMWARE_EDID + bool "Enable firmware EDID" + depends on FB + default n + ---help--- + This enables access to the EDID transferred from the firmware. + On the i386, this is from the Video BIOS. Enable this if DDC/I2C + transfers do not work for your driver and if you are using + nvidiafb, i810fb or savagefb. + + In general, choosing Y for this option is safe. If you + experience extremely long delays while booting before you get + something on your display, try setting this to N. Matrox cards in + combination with certain motherboards and monitors are known to + suffer from this problem. + +config FB_DDC + tristate + depends on FB + select I2C_ALGOBIT + select I2C + default n + config FB_CFB_FILLRECT tristate depends on FB @@ -65,26 +95,62 @@ config FB_CFB_IMAGEBLIT blitting. This is used by drivers that don't provide their own (accelerated) version. -config FB_MACMODES +config FB_SYS_FILLRECT + tristate + depends on FB + default n + ---help--- + Include the sys_fillrect function for generic software rectangle + filling. This is used by drivers that don't provide their own + (accelerated) version and the framebuffer is in system RAM. + +config FB_SYS_COPYAREA + tristate + depends on FB + default n + ---help--- + Include the sys_copyarea function for generic software area copying. + This is used by drivers that don't provide their own (accelerated) + version and the framebuffer is in system RAM. + +config FB_SYS_IMAGEBLIT + tristate + depends on FB + default n + ---help--- + Include the sys_imageblit function for generic software image + blitting. This is used by drivers that don't provide their own + (accelerated) version and the framebuffer is in system RAM. + +config FB_SYS_FOPS tristate depends on FB default n -config FB_FIRMWARE_EDID - bool "Enable firmware EDID" +config FB_DEFERRED_IO + bool + depends on FB + default y + +config FB_SVGALIB + tristate + depends on FB + default n + ---help--- + Common utility functions useful to fbdev drivers of VGA-based + cards. + +config FB_MACMODES + tristate depends on FB - default y - ---help--- - This enables access to the EDID transferred from the firmware. - On the i386, this is from the Video BIOS. Enable this if DDC/I2C - transfers do not work for your driver and if you are using - nvidiafb, i810fb or savagefb. + default n - In general, choosing Y for this option is safe. If you - experience extremely long delays while booting before you get - something on your display, try setting this to N. Matrox cards in - combination with certain motherboards and monitors are known to - suffer from this problem. +config FB_BACKLIGHT + bool + depends on FB + select BACKLIGHT_LCD_SUPPORT + select BACKLIGHT_CLASS_DEVICE + default n config FB_MODE_HELPERS bool "Enable Video Mode Handling Helpers" @@ -115,6 +181,9 @@ config FB_TILEBLITTING This is particularly important to one driver, matroxfb. If unsure, say N. +comment "Frame buffer hardware drivers" + depends on FB + config FB_CIRRUS tristate "Cirrus Logic support" depends on FB && (ZORRO || PCI) @@ -164,7 +233,7 @@ config FB_ARMCLCD If you want to compile this as a module (=code which can be inserted into and removed from the running kernel), say M - here and read . The module + here and read . The module will be called amba-clcd. choice @@ -177,7 +246,7 @@ config FB_ARMCLCD_SHARP_LQ035Q7DB02_HRTFT bool "LogicPD LCD 3.5\" QVGA w/HRTFT IC" help This is an implementation of the Sharp LQ035Q7DB02, a 3.5" - color QVGA, HRTFT panel. The LogicPD device includes an + color QVGA, HRTFT panel. The LogicPD device includes an integrated HRTFT controller IC. The native resolution is 240x320. @@ -335,42 +404,6 @@ config FB_AMIGA_AGA and CD32. If you intend to run Linux on any of these systems, say Y; otherwise say N. -config FB_CYBER - tristate "Amiga CyberVision 64 support" - depends on FB && ZORRO && BROKEN - select FB_CFB_FILLRECT - select FB_CFB_COPYAREA - select FB_CFB_IMAGEBLIT - help - This enables support for the Cybervision 64 graphics card from - Phase5. Please note that its use is not all that intuitive (i.e. if - you have any questions, be sure to ask!). Say N unless you have a - Cybervision 64 or plan to get one before you next recompile the - kernel. Please note that this driver DOES NOT support the - Cybervision 64/3D card, as they use incompatible video chips. - -config FB_VIRGE - bool "Amiga CyberVision 64/3D support " - depends on (FB = y) && ZORRO && BROKEN - select FB_CFB_FILLRECT - select FB_CFB_COPYAREA - select FB_CFB_IMAGEBLIT - help - This enables support for the Cybervision 64/3D graphics card from - Phase5. Please note that its use is not all that intuitive (i.e. if - you have any questions, be sure to ask!). Say N unless you have a - Cybervision 64/3D or plan to get one before you next recompile the - kernel. Please note that this driver DOES NOT support the older - Cybervision 64 card, as they use incompatible video chips. - -config FB_RETINAZ3 - tristate "Amiga Retina Z3 support" - depends on (FB = y) && ZORRO && BROKEN - help - This enables support for the Retina Z3 graphics card. Say N unless - you have a Retina Z3 or plan to get one before you next recompile - the kernel. - config FB_FM2 bool "Amiga FrameMaster II/Rainbow II support" depends on (FB = y) && ZORRO @@ -384,28 +417,31 @@ config FB_FM2 config FB_ARC tristate "Arc Monochrome LCD board support" depends on FB && X86 - select FB_CFB_FILLRECT - select FB_CFB_COPYAREA - select FB_CFB_IMAGEBLIT + select FB_SYS_FILLRECT + select FB_SYS_COPYAREA + select FB_SYS_IMAGEBLIT help This enables support for the Arc Monochrome LCD board. The board is based on the KS-108 lcd controller and is typically a matrix of 2*n chips. This driver was tested with a 128x64 panel. This driver supports it for use with x86 SBCs through a 16 bit GPIO - interface (8 bit data, 8 bit control). If you anticpate using + interface (8 bit data, 8 bit control). If you anticipate using this driver, say Y or M; otherwise say N. You must specify the GPIO IO address to be used for setting control and data. config FB_ATARI bool "Atari native chipset support" - depends on (FB = y) && ATARI && BROKEN + depends on (FB = y) && ATARI + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This is the frame buffer device driver for the builtin graphics chipset found in Ataris. config FB_OF bool "Open Firmware frame buffer device support" - depends on (FB = y) && (PPC64 || PPC_OF) + depends on (FB = y) && (PPC64 || PPC_OF) && (!PPC_PSERIES || PCI) select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT @@ -416,7 +452,7 @@ config FB_OF config FB_CONTROL bool "Apple \"control\" display support" - depends on (FB = y) && PPC_PMAC + depends on (FB = y) && PPC_PMAC && PPC32 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT @@ -427,7 +463,7 @@ config FB_CONTROL config FB_PLATINUM bool "Apple \"platinum\" display support" - depends on (FB = y) && PPC_PMAC + depends on (FB = y) && PPC_PMAC && PPC32 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT @@ -438,7 +474,7 @@ config FB_PLATINUM config FB_VALKYRIE bool "Apple \"valkyrie\" display support" - depends on (FB = y) && (MAC || PPC_PMAC) + depends on (FB = y) && (MAC || (PPC_PMAC && PPC32)) select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT @@ -449,7 +485,7 @@ config FB_VALKYRIE config FB_CT65550 bool "Chips 65550 display support" - depends on (FB = y) && PPC + depends on (FB = y) && PPC32 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT @@ -481,6 +517,7 @@ config FB_VGA16 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select VGASTATE help This is the frame buffer device driver for VGA 16 color graphic cards. Say Y if you have such a card. @@ -525,14 +562,25 @@ config FB_HP300 default y config FB_TGA - tristate "TGA framebuffer support" - depends on FB && ALPHA + tristate "TGA/SFB+ framebuffer support" + depends on FB && (ALPHA || TC) select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - help - This is the frame buffer device driver for generic TGA graphic - cards. Say Y if you have one of those. + select BITREVERSE + ---help--- + This is the frame buffer device driver for generic TGA and SFB+ + graphic cards. These include DEC ZLXp-E1, -E2 and -E3 PCI cards, + also known as PBXGA-A, -B and -C, and DEC ZLX-E1, -E2 and -E3 + TURBOchannel cards, also known as PMAGD-A, -B and -C. + + Due to hardware limitations ZLX-E2 and E3 cards are not supported + for DECstation 5000/200 systems. Additionally due to firmware + limitations these cards may cause troubles with booting DECstation + 5000/240 and /260 systems, but are fully supported under Linux if + you manage to get it going. ;-) + + Say Y if you have one of those. config FB_VESA bool "VESA VGA graphics support" @@ -540,16 +588,35 @@ config FB_VESA select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select VIDEO_SELECT help This is the frame buffer device driver for generic VESA 2.0 compliant graphic cards. The older VESA 1.2 cards are not supported. You will get a boot time penguin logo at no additional cost. Please read . If unsure, say Y. -config VIDEO_SELECT - bool - depends on FB_VESA - default y +config FB_IMAC + bool "Intel-based Macintosh Framebuffer Support" + depends on (FB = y) && X86 && EFI + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + help + This is the frame buffer device driver for the Intel-based Macintosh + +config FB_HECUBA + tristate "Hecuba board support" + depends on FB && X86 && MMU + select FB_SYS_FILLRECT + select FB_SYS_COPYAREA + select FB_SYS_IMAGEBLIT + select FB_DEFERRED_IO + help + This enables support for the Hecuba board. This driver was tested + with an E-Ink 800x600 display and x86 SBCs through a 16 bit GPIO + interface (8 bit data, 4 bit control). If you anticpate using + this driver, say Y or M; otherwise say N. You must specify the + GPIO IO address to be used for setting control and data. config FB_HGA tristate "Hercules mono graphics support" @@ -573,12 +640,6 @@ config FB_HGA_ACCEL This will compile the Hercules mono graphics with acceleration functions. - -config VIDEO_SELECT - bool - depends on (FB = y) && X86 - default y - config FB_SGIVW tristate "SGI Visual Workstation framebuffer support" depends on FB && X86_VISWS @@ -606,10 +667,6 @@ config FB_GBE_MEM This is the amount of memory reserved for the framebuffer, which can be any value between 1MB and 8MB. -config FB_SUN3 - bool "Sun3 framebuffer support" - depends on (FB = y) && (SUN3 || SUN3X) && BROKEN - config FB_SBUS bool "SBUS and UPA framebuffers" depends on (FB = y) && SPARC @@ -618,7 +675,7 @@ config FB_SBUS config FB_BW2 bool "BWtwo support" - depends on (FB = y) && (SPARC && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3) + depends on (FB = y) && (SPARC && FB_SBUS) select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT @@ -627,7 +684,7 @@ config FB_BW2 config FB_CG3 bool "CGthree support" - depends on (FB = y) && (SPARC && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3) + depends on (FB = y) && (SPARC && FB_SBUS) select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT @@ -636,7 +693,7 @@ config FB_CG3 config FB_CG6 bool "CGsix (GX,TurboGX) support" - depends on (FB = y) && (SPARC && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3) + depends on (FB = y) && (SPARC && FB_SBUS) select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT help @@ -690,12 +747,13 @@ config FB_S1D13XXX config FB_NVIDIA tristate "nVidia Framebuffer Support" depends on FB && PCI - select I2C_ALGOBIT if FB_NVIDIA_I2C - select I2C if FB_NVIDIA_I2C + select FB_BACKLIGHT if FB_NVIDIA_BACKLIGHT select FB_MODE_HELPERS select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select BITREVERSE + select VGASTATE help This driver supports graphics boards with the nVidia chips, TNT and newer. For very old chipsets, such as the RIVA128, then use @@ -708,6 +766,7 @@ config FB_NVIDIA config FB_NVIDIA_I2C bool "Enable DDC Support" depends on FB_NVIDIA + select FB_DDC help This enables I2C support for nVidia Chipsets. This is used only for getting EDID information from the attached display @@ -717,15 +776,23 @@ config FB_NVIDIA_I2C independently validate video mode parameters, you should say Y here. +config FB_NVIDIA_BACKLIGHT + bool "Support for backlight control" + depends on FB_NVIDIA + default y + help + Say Y here if you want to control the backlight of your display. + config FB_RIVA tristate "nVidia Riva support" depends on FB && PCI - select I2C_ALGOBIT if FB_RIVA_I2C - select I2C if FB_RIVA_I2C + select FB_BACKLIGHT if FB_RIVA_BACKLIGHT select FB_MODE_HELPERS select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select BITREVERSE + select VGASTATE help This driver supports graphics boards with the nVidia Riva/Geforce chips. @@ -737,6 +804,7 @@ config FB_RIVA config FB_RIVA_I2C bool "Enable DDC Support" depends on FB_RIVA + select FB_DDC help This enables I2C support for nVidia Chipsets. This is used only for getting EDID information from the attached display @@ -752,9 +820,16 @@ config FB_RIVA_DEBUG default n help Say Y here if you want the Riva driver to output all sorts - of debugging informations to provide to the maintainer when + of debugging information to provide to the maintainer when something goes wrong. +config FB_RIVA_BACKLIGHT + bool "Support for backlight control" + depends on FB_RIVA + default y + help + Say Y here if you want to control the backlight of your display. + config FB_I810 tristate "Intel 810/815 support (EXPERIMENTAL)" depends on FB && EXPERIMENTAL && PCI && X86_32 @@ -764,6 +839,7 @@ config FB_I810 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select VGASTATE help This driver supports the on-board graphics built in to the Intel 810 and 815 chipsets. Say Y if you have and plan to use such a board. @@ -800,13 +876,12 @@ config FB_I810_GTF config FB_I810_I2C bool "Enable DDC Support" depends on FB_I810 && FB_I810_GTF - select I2C - select I2C_ALGOBIT + select FB_DDC help config FB_INTEL - tristate "Intel 830M/845G/852GM/855GM/865G support (EXPERIMENTAL)" - depends on FB && EXPERIMENTAL && PCI && X86_32 + tristate "Intel 830M/845G/852GM/855GM/865G/915G/945G support (EXPERIMENTAL)" + depends on FB && EXPERIMENTAL && PCI && X86 select AGP select AGP_INTEL select FB_MODE_HELPERS @@ -815,20 +890,37 @@ config FB_INTEL select FB_CFB_IMAGEBLIT help This driver supports the on-board graphics built in to the Intel - 830M/845G/852GM/855GM/865G chipsets. + 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM chipsets. Say Y if you have and plan to use such a board. - To compile this driver as a module, choose M here: the + If you say Y here and want DDC/I2C support you must first say Y to + "I2C support" and "I2C bit-banging support" in the character devices + section. + + If you say M here then "I2C support" and "I2C bit-banging support" + can be build either as modules or built-in. + + To compile this driver as a module, choose M here: the module will be called intelfb. + For more information, please read + config FB_INTEL_DEBUG - bool "Intel driver Debug Messages" + bool "Intel driver Debug Messages" depends on FB_INTEL ---help--- Say Y here if you want the Intel driver to output all sorts - of debugging informations to provide to the maintainer when + of debugging information to provide to the maintainer when something goes wrong. +config FB_INTEL_I2C + bool "DDC/I2C for Intel framebuffer support" + depends on FB_INTEL + select FB_DDC + default y + help + Say Y here if you want DDC/I2C support for your on-board Intel graphics. + config FB_MATROX tristate "Matrox acceleration" depends on FB && PCI @@ -903,8 +995,8 @@ config FB_MATROX_G config FB_MATROX_I2C tristate "Matrox I2C support" - depends on FB_MATROX && I2C - select I2C_ALGOBIT + depends on FB_MATROX + select FB_DDC ---help--- This drivers creates I2C buses which are needed for accessing the DDC (I2C) bus present on all Matroxes, an I2C bus which @@ -972,8 +1064,7 @@ config FB_MATROX_MULTIHEAD config FB_RADEON tristate "ATI Radeon display support" depends on FB && PCI - select I2C_ALGOBIT if FB_RADEON_I2C - select I2C if FB_RADEON_I2C + select FB_BACKLIGHT if FB_RADEON_BACKLIGHT select FB_MODE_HELPERS select FB_CFB_FILLRECT select FB_CFB_COPYAREA @@ -993,20 +1084,29 @@ config FB_RADEON There is a product page at http://apps.ati.com/ATIcompare/ + config FB_RADEON_I2C bool "DDC/I2C for ATI Radeon support" depends on FB_RADEON + select FB_DDC default y help Say Y here if you want DDC/I2C support for your Radeon board. +config FB_RADEON_BACKLIGHT + bool "Support for backlight control" + depends on FB_RADEON + default y + help + Say Y here if you want to control the backlight of your display. + config FB_RADEON_DEBUG bool "Lots of debug output from Radeon driver" depends on FB_RADEON default n help Say Y here if you want the Radeon driver to output all sorts - of debugging informations to provide to the maintainer when + of debugging information to provide to the maintainer when something goes wrong. config FB_ATY128 @@ -1015,6 +1115,7 @@ config FB_ATY128 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select FB_BACKLIGHT if FB_ATY128_BACKLIGHT select FB_MACMODES if PPC_PMAC help This driver supports graphics boards with the ATI Rage128 chips. @@ -1024,12 +1125,20 @@ config FB_ATY128 To compile this driver as a module, choose M here: the module will be called aty128fb. +config FB_ATY128_BACKLIGHT + bool "Support for backlight control" + depends on FB_ATY128 + default y + help + Say Y here if you want to control the backlight of your display. + config FB_ATY tristate "ATI Mach64 display support" if PCI || ATARI depends on FB && !SPARC32 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select FB_BACKLIGHT if FB_ATY_BACKLIGHT select FB_MACMODES if PPC help This driver supports graphics boards with the ATI Mach64 chips. @@ -1066,21 +1175,33 @@ config FB_ATY_GX is at . -config FB_S3TRIO - bool "S3 Trio display support" - depends on (FB = y) && PPC && BROKEN +config FB_ATY_BACKLIGHT + bool "Support for backlight control" + depends on FB_ATY + default y help - If you have a S3 Trio say Y. Say N for S3 Virge. + Say Y here if you want to control the backlight of your display. + +config FB_S3 + tristate "S3 Trio/Virge support" + depends on FB && PCI + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + select FB_TILEBLITTING + select FB_SVGALIB + select VGASTATE + ---help--- + Driver for graphics boards with S3 Trio / S3 Virge chip. config FB_SAVAGE tristate "S3 Savage support" depends on FB && PCI && EXPERIMENTAL - select I2C_ALGOBIT if FB_SAVAGE_I2C - select I2C if FB_SAVAGE_I2C select FB_MODE_HELPERS select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select VGASTATE help This driver supports notebooks and computers with S3 Savage PCI/AGP chips. @@ -1093,6 +1214,7 @@ config FB_SAVAGE config FB_SAVAGE_I2C bool "Enable DDC2 Support" depends on FB_SAVAGE + select FB_DDC help This enables I2C support for S3 Savage Chipsets. This is used only for getting EDID information from the attached display @@ -1146,6 +1268,7 @@ config FB_NEOMAGIC select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select VGASTATE help This driver supports notebooks with NeoMagic PCI chips. Say Y if you have such a graphics card. @@ -1273,7 +1396,7 @@ config FB_AU1100 config FB_AU1200 bool "Au1200 LCD Driver" - depends on FB && MIPS && SOC_AU1200 + depends on (FB = y) && MIPS && SOC_AU1200 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT @@ -1333,6 +1456,32 @@ config FB_LEO This is the frame buffer device driver for the SBUS-based Sun ZX (leo) frame buffer cards. +config FB_XVR500 + bool "Sun XVR-500 3DLABS Wildcat support" + depends on FB && PCI && SPARC64 + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + help + This is the framebuffer device for the Sun XVR-500 and similar + graphics cards based upon the 3DLABS Wildcat chipset. The driver + only works on sparc64 systems where the system firwmare has + mostly initialized the card already. It is treated as a + completely dumb framebuffer device. + +config FB_XVR2500 + bool "Sun XVR-2500 3DLABS Wildcat support" + depends on FB && PCI && SPARC64 + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + help + This is the framebuffer device for the Sun XVR-2500 and similar + graphics cards based upon the 3DLABS Wildcat chipset. The driver + only works on sparc64 systems where the system firwmare has + mostly initialized the card already. It is treated as a + completely dumb framebuffer device. + config FB_PCI bool "PCI framebuffers" depends on (FB = y) && PCI && SPARC @@ -1368,8 +1517,8 @@ config FB_PMAG_AA used mainly in the MIPS-based DECstation series. config FB_PMAG_BA - bool "PMAG-BA TURBOchannel framebuffer support" - depends on (FB = y) && TC + tristate "PMAG-BA TURBOchannel framebuffer support" + depends on FB && TC select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT @@ -1378,8 +1527,8 @@ config FB_PMAG_BA used mainly in the MIPS-based DECstation series. config FB_PMAGB_B - bool "PMAGB-B TURBOchannel framebuffer support" - depends on (FB = y) && TC + tristate "PMAGB-B TURBOchannel framebuffer support" + depends on TC select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT @@ -1423,7 +1572,7 @@ config FB_G364 config FB_68328 bool "Motorola 68328 native frame buffer support" - depends on FB && (M68328 || M68EZ328 || M68VZ328) + depends on (FB = y) && (M68328 || M68EZ328 || M68VZ328) select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT @@ -1444,7 +1593,7 @@ config FB_PXA This driver is also available as a module ( = code which can be inserted and removed from the running kernel whenever you want). The module will be called pxafb. If you want to compile it as a module, - say M here and read . + say M here and read . If unsure, say N. @@ -1465,6 +1614,26 @@ config FB_PXA_PARAMETERS describes the available parameters. +config FB_MBX + tristate "2700G LCD framebuffer support" + depends on FB && ARCH_PXA + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + ---help--- + Framebuffer driver for the Intel 2700G (Marathon) Graphics + Accelerator + +config FB_MBX_DEBUG + bool "Enable debugging info via debugfs" + depends on FB_MBX && DEBUG_FS + default n + ---help--- + Enable this if you want debugging information using the debug + filesystem (debugfs) + + If unsure, say N. + config FB_W100 tristate "W100 frame buffer support" depends on FB && PXA_SHARPSL @@ -1477,7 +1646,7 @@ config FB_W100 This driver is also available as a module ( = code which can be inserted and removed from the running kernel whenever you want). The module will be called w100fb. If you want to compile it as a module, - say M here and read . + say M here and read . If unsure, say N. @@ -1494,7 +1663,7 @@ config FB_S3C2410 This driver is also available as a module ( = code which can be inserted and removed from the running kernel whenever you want). The module will be called s3c2410fb. If you want to compile it as a module, - say M here and read . + say M here and read . If unsure, say N. config FB_S3C2410_DEBUG @@ -1504,13 +1673,75 @@ config FB_S3C2410_DEBUG Turn on debugging messages. Note that you can set/unset at run time through sysfs -config FB_VIRTUAL - tristate "Virtual Frame Buffer support (ONLY FOR TESTING!)" - depends on FB +config FB_SM501 + tristate "Silicon Motion SM501 framebuffer support" + depends on FB && MFD_SM501 + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + ---help--- + Frame buffer driver for the CRT and LCD controllers in the Silicon + Motion SM501. + + This driver is also available as a module ( = code which can be + inserted and removed from the running kernel whenever you want). The + module will be called sm501fb. If you want to compile it as a module, + say M here and read . + + If unsure, say N. + + +config FB_PNX4008_DUM + tristate "Display Update Module support on Philips PNX4008 board" + depends on FB && ARCH_PNX4008 + ---help--- + Say Y here to enable support for PNX4008 Display Update Module (DUM) + +config FB_PNX4008_DUM_RGB + tristate "RGB Framebuffer support on Philips PNX4008 board" + depends on FB_PNX4008_DUM + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + ---help--- + Say Y here to enable support for PNX4008 RGB Framebuffer + +config FB_IBM_GXT4500 + tristate "Framebuffer support for IBM GXT4500P adaptor" + depends on PPC + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + ---help--- + Say Y here to enable support for the IBM GXT4500P display + adaptor, found on some IBM System P (pSeries) machines. + +config FB_PS3 + bool "PS3 GPU framebuffer driver" + depends on (FB = y) && PS3_PS3AV select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT ---help--- + Include support for the virtual frame buffer in the PS3 platform. + +config FB_PS3_DEFAULT_SIZE_M + int "PS3 default frame buffer size (in MiB)" + depends on FB_PS3 + default 18 + ---help--- + This is the default size (in MiB) of the virtual frame buffer in + the PS3. + The default value can be overridden on the kernel command line + using the "ps3fb" option (e.g. "ps3fb=9M"); + +config FB_VIRTUAL + tristate "Virtual Frame Buffer support (ONLY FOR TESTING!)" + depends on FB + select FB_SYS_FILLRECT + select FB_SYS_COPYAREA + select FB_SYS_IMAGEBLIT + ---help--- This is a `virtual' frame buffer device. It operates on a chunk of unswappable kernel memory instead of on the memory of a graphics board. This means you cannot see any output sent to this frame @@ -1521,9 +1752,11 @@ config FB_VIRTUAL kernel option `video=vfb:'. To compile this driver as a module, choose M here: the - module will be called vfb. + module will be called vfb. In order to load it, you must use + the vfb_enable=1 option. If unsure, say N. + if VT source "drivers/video/console/Kconfig" endif @@ -1532,9 +1765,5 @@ if FB || SGI_NEWPORT_CONSOLE source "drivers/video/logo/Kconfig" endif -if FB && SYSFS - source "drivers/video/backlight/Kconfig" -endif - endmenu