X-Git-Url: http://ftp.safe.ca/?a=blobdiff_plain;f=drivers%2Fvideo%2FKconfig;h=702eb933cf88bc9414ccbcb85e74de2dcfc18b08;hb=737c17561fb2c6a72810cca7d7c0b8bdc29bb120;hp=773ae11b4a19edfddf92b0333462d6ef19c000d3;hpb=7a482425f45e695a2e2821b32a887865f016fbf9;p=safe%2Fjmp%2Flinux-2.6 diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index 773ae11..702eb93 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -4,6 +4,21 @@ menu "Graphics support" +config FIRMWARE_EDID + bool "Enable firmware EDID" + default y + ---help--- + This enables access to the EDID transferred from the firmware. + On the i386, this is from the Video BIOS. Enable this if DDC/I2C + transfers do not work for your driver and if you are using + nvidiafb, i810fb or savagefb. + + In general, choosing Y for this option is safe. If you + experience extremely long delays while booting before you get + something on your display, try setting this to N. Matrox cards in + combination with certain motherboards and monitors are known to + suffer from this problem. + config FB tristate "Support for frame buffer devices" ---help--- @@ -65,20 +80,18 @@ config FB_CFB_IMAGEBLIT blitting. This is used by drivers that don't provide their own (accelerated) version. -config FB_SOFT_CURSOR - tristate - depends on FB - default n - ---help--- - Include the soft_cursor function for generic software cursor support. - This is used by drivers that don't provide their own (accelerated) - version. - config FB_MACMODES tristate depends on FB default n +config FB_BACKLIGHT + bool + depends on FB + select BACKLIGHT_LCD_SUPPORT + select BACKLIGHT_CLASS_DEVICE + default n + config FB_MODE_HELPERS bool "Enable Video Mode Handling Helpers" depends on FB @@ -114,7 +127,6 @@ config FB_CIRRUS select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR ---help--- This enables support for Cirrus Logic GD542x/543x based boards on Amiga: SD64, Piccolo, Picasso II/II+, Picasso IV, or EGS Spectrum. @@ -133,7 +145,6 @@ config FB_PM2 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help This is the frame buffer device driver for the Permedia2 AGP frame buffer card from ASK, aka `Graphic Blaster Exxtreme'. There is a @@ -152,7 +163,6 @@ config FB_ARMCLCD select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help This framebuffer device driver is for the ARM PrimeCell PL110 Colour LCD controller. ARM PrimeCells provide the building @@ -163,13 +173,75 @@ config FB_ARMCLCD here and read . The module will be called amba-clcd. +choice + + depends on FB_ARMCLCD && (ARCH_LH7A40X || ARCH_LH7952X) + prompt "LCD Panel" + default FB_ARMCLCD_SHARP_LQ035Q7DB02 + +config FB_ARMCLCD_SHARP_LQ035Q7DB02_HRTFT + bool "LogicPD LCD 3.5\" QVGA w/HRTFT IC" + help + This is an implementation of the Sharp LQ035Q7DB02, a 3.5" + color QVGA, HRTFT panel. The LogicPD device includes an + an integrated HRTFT controller IC. + The native resolution is 240x320. + +config FB_ARMCLCD_SHARP_LQ057Q3DC02 + bool "LogicPD LCD 5.7\" QVGA" + help + This is an implementation of the Sharp LQ057Q3DC02, a 5.7" + color QVGA, TFT panel. The LogicPD device includes an + The native resolution is 320x240. + +config FB_ARMCLCD_SHARP_LQ64D343 + bool "LogicPD LCD 6.4\" VGA" + help + This is an implementation of the Sharp LQ64D343, a 6.4" + color VGA, TFT panel. The LogicPD device includes an + The native resolution is 640x480. + +config FB_ARMCLCD_SHARP_LQ10D368 + bool "LogicPD LCD 10.4\" VGA" + help + This is an implementation of the Sharp LQ10D368, a 10.4" + color VGA, TFT panel. The LogicPD device includes an + The native resolution is 640x480. + + +config FB_ARMCLCD_SHARP_LQ121S1DG41 + bool "LogicPD LCD 12.1\" SVGA" + help + This is an implementation of the Sharp LQ121S1DG41, a 12.1" + color SVGA, TFT panel. The LogicPD device includes an + The native resolution is 800x600. + + This panel requires a clock rate may be an integer fraction + of the base LCDCLK frequency. The driver will select the + highest frequency available that is lower than the maximum + allowed. The panel may flicker if the clock rate is + slower than the recommended minimum. + +config FB_ARMCLCD_AUO_A070VW01_WIDE + bool "AU Optronics A070VW01 LCD 7.0\" WIDE" + help + This is an implementation of the AU Optronics, a 7.0" + WIDE Color. The native resolution is 234x480. + +config FB_ARMCLCD_HITACHI + bool "Hitachi Wide Screen 800x480" + help + This is an implementation of the Hitachi 800x480. + +endchoice + + config FB_ACORN bool "Acorn VIDC support" depends on (FB = y) && ARM && (ARCH_ACORN || ARCH_CLPS7500) select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help This is the frame buffer device driver for the Acorn VIDC graphics hardware found in Acorn RISC PCs and other ARM-based machines. If @@ -181,7 +253,9 @@ config FB_CLPS711X select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR + help + Say Y to enable the Framebuffer driver for the CLPS7111 and + EP7212 processors. config FB_SA1100 bool "SA-1100 LCD support" @@ -189,7 +263,6 @@ config FB_SA1100 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help This is a framebuffer device for the SA-1100 LCD Controller. See for information on framebuffer @@ -204,7 +277,6 @@ config FB_IMX select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR config FB_CYBER2000 tristate "CyberPro 2000/2010/5000 support" @@ -212,7 +284,6 @@ config FB_CYBER2000 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help This enables support for the Integraphics CyberPro 20x0 and 5000 VGA chips used in the Rebel.com Netwinder and other machines. @@ -225,7 +296,6 @@ config FB_APOLLO default y select FB_CFB_FILLRECT select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR config FB_Q40 bool @@ -234,12 +304,10 @@ config FB_Q40 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR config FB_AMIGA tristate "Amiga native chipset support" depends on FB && AMIGA - select FB_SOFT_CURSOR help This is the frame buffer device driver for the builtin graphics chipset found in Amigas. @@ -279,7 +347,6 @@ config FB_CYBER select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help This enables support for the Cybervision 64 graphics card from Phase5. Please note that its use is not all that intuitive (i.e. if @@ -294,7 +361,6 @@ config FB_VIRGE select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help This enables support for the Cybervision 64/3D graphics card from Phase5. Please note that its use is not all that intuitive (i.e. if @@ -317,7 +383,6 @@ config FB_FM2 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help This is the frame buffer device driver for the Amiga FrameMaster card from BSC (exhibited 1992 but not shipped as a CBM product). @@ -328,7 +393,6 @@ config FB_ARC select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help This enables support for the Arc Monochrome LCD board. The board is based on the KS-108 lcd controller and is typically a matrix @@ -351,7 +415,6 @@ config FB_OF select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR select FB_MACMODES help Say Y if you want support with Open Firmware for your graphics @@ -359,11 +422,10 @@ config FB_OF config FB_CONTROL bool "Apple \"control\" display support" - depends on (FB = y) && PPC_PMAC + depends on (FB = y) && PPC_PMAC && PPC32 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR select FB_MACMODES help This driver supports a frame buffer for the graphics adapter in the @@ -371,11 +433,10 @@ config FB_CONTROL config FB_PLATINUM bool "Apple \"platinum\" display support" - depends on (FB = y) && PPC_PMAC + depends on (FB = y) && PPC_PMAC && PPC32 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR select FB_MACMODES help This driver supports a frame buffer for the "platinum" graphics @@ -383,11 +444,10 @@ config FB_PLATINUM config FB_VALKYRIE bool "Apple \"valkyrie\" display support" - depends on (FB = y) && (MAC || PPC_PMAC) + depends on (FB = y) && (MAC || (PPC_PMAC && PPC32)) select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR select FB_MACMODES help This driver supports a frame buffer for the "valkyrie" graphics @@ -395,46 +455,38 @@ config FB_VALKYRIE config FB_CT65550 bool "Chips 65550 display support" - depends on (FB = y) && PPC + depends on (FB = y) && PPC32 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help This is the frame buffer device driver for the Chips & Technologies 65550 graphics chip in PowerBooks. config FB_ASILIANT - bool "Chips 69000 display support" + bool "Asiliant (Chips) 69000 display support" depends on (FB = y) && PCI select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR + help + This is the frame buffer device driver for the Asiliant 69030 chipset config FB_IMSTT bool "IMS Twin Turbo display support" depends on (FB = y) && PCI select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR select FB_MACMODES if PPC help The IMS Twin Turbo is a PCI-based frame buffer card bundled with many Macintosh and compatible computers. -config FB_S3TRIO - bool "S3 Trio display support" - depends on (FB = y) && PPC && BROKEN - help - If you have a S3 Trio say Y. Say N for S3 Virge. - config FB_VGA16 tristate "VGA 16-color graphics support" depends on FB && (X86 || PPC) select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help This is the frame buffer device driver for VGA 16 color graphic cards. Say Y if you have such a card. @@ -448,7 +500,6 @@ config FB_STI select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR default y ---help--- STI refers to the HP "Standard Text Interface" which is a set of @@ -469,7 +520,6 @@ config FB_MAC select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR select FB_MACMODES # bool ' Apple DAFB display support' CONFIG_FB_DAFB @@ -478,7 +528,6 @@ config FB_HP300 depends on (FB = y) && HP300 select FB_CFB_FILLRECT select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR default y config FB_TGA @@ -487,28 +536,30 @@ config FB_TGA select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help This is the frame buffer device driver for generic TGA graphic cards. Say Y if you have one of those. config FB_VESA bool "VESA VGA graphics support" - depends on (FB = y) && (X86 || X86_64) + depends on (FB = y) && X86 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help This is the frame buffer device driver for generic VESA 2.0 compliant graphic cards. The older VESA 1.2 cards are not supported. You will get a boot time penguin logo at no additional cost. Please read . If unsure, say Y. -config VIDEO_SELECT - bool - depends on FB_VESA - default y +config FB_IMAC + bool "Intel-based Macintosh Framebuffer Support" + depends on (FB = y) && X86 && EFI + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + help + This is the frame buffer device driver for the Intel-based Macintosh config FB_HGA tristate "Hercules mono graphics support" @@ -516,7 +567,6 @@ config FB_HGA select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help Say Y here if you have a Hercules mono graphics card. @@ -533,19 +583,12 @@ config FB_HGA_ACCEL This will compile the Hercules mono graphics with acceleration functions. - -config VIDEO_SELECT - bool - depends on (FB = y) && X86 - default y - config FB_SGIVW tristate "SGI Visual Workstation framebuffer support" depends on FB && X86_VISWS select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help SGI Visual Workstation support for framebuffer graphics. @@ -555,7 +598,6 @@ config FB_GBE select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help This is the frame buffer device driver for SGI Graphics Backend. This chip is used in SGI O2 and Visual Workstation 320/540. @@ -563,45 +605,44 @@ config FB_GBE config FB_GBE_MEM int "Video memory size in MB" depends on FB_GBE - default 8 + default 4 help This is the amount of memory reserved for the framebuffer, which can be any value between 1MB and 8MB. -config BUS_I2C - bool - depends on (FB = y) && VISWS - default y - config FB_SUN3 bool "Sun3 framebuffer support" depends on (FB = y) && (SUN3 || SUN3X) && BROKEN +config FB_SBUS + bool "SBUS and UPA framebuffers" + depends on (FB = y) && SPARC + help + Say Y if you want support for SBUS or UPA based frame buffer device. + config FB_BW2 bool "BWtwo support" - depends on (FB = y) && ((SPARC32 || SPARC64) && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3) + depends on (FB = y) && (SPARC && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3) select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help This is the frame buffer device driver for the BWtwo frame buffer. config FB_CG3 bool "CGthree support" - depends on (FB = y) && ((SPARC32 || SPARC64) && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3) + depends on (FB = y) && (SPARC && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3) + select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help This is the frame buffer device driver for the CGthree frame buffer. config FB_CG6 bool "CGsix (GX,TurboGX) support" - depends on (FB = y) && ((SPARC32 || SPARC64) && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3) + depends on (FB = y) && (SPARC && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3) select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help This is the frame buffer device driver for the CGsix (GX, TurboGX) frame buffer. @@ -612,7 +653,6 @@ config FB_PVR2 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR ---help--- Say Y here if you have a PowerVR 2 card in your box. If you plan to run linux on your Dreamcast, you will have to say Y here. @@ -634,13 +674,23 @@ config FB_EPSON1355 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help Build in support for the SED1355 Epson Research Embedded RAMDAC LCD/CRT Controller (since redesignated as the S1D13505) as a framebuffer. Product specs at . +config FB_S1D13XXX + tristate "Epson S1D13XXX framebuffer support" + depends on FB + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + help + Support for S1D13XXX framebuffer device family (currently only + working with S1D13806). Product specs at + + config FB_NVIDIA tristate "nVidia Framebuffer Support" depends on FB && PCI @@ -650,7 +700,6 @@ config FB_NVIDIA select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help This driver supports graphics boards with the nVidia chips, TNT and newer. For very old chipsets, such as the RIVA128, then use @@ -662,7 +711,7 @@ config FB_NVIDIA config FB_NVIDIA_I2C bool "Enable DDC Support" - depends on FB_NVIDIA && !PPC_OF + depends on FB_NVIDIA help This enables I2C support for nVidia Chipsets. This is used only for getting EDID information from the attached display @@ -672,6 +721,14 @@ config FB_NVIDIA_I2C independently validate video mode parameters, you should say Y here. +config FB_NVIDIA_BACKLIGHT + bool "Support for backlight control" + depends on FB_NVIDIA && PMAC_BACKLIGHT + select FB_BACKLIGHT + default y + help + Say Y here if you want to control the backlight of your display. + config FB_RIVA tristate "nVidia Riva support" depends on FB && PCI @@ -710,9 +767,17 @@ config FB_RIVA_DEBUG of debugging informations to provide to the maintainer when something goes wrong. +config FB_RIVA_BACKLIGHT + bool "Support for backlight control" + depends on FB_RIVA && PMAC_BACKLIGHT + select FB_BACKLIGHT + default y + help + Say Y here if you want to control the backlight of your display. + config FB_I810 tristate "Intel 810/815 support (EXPERIMENTAL)" - depends on FB && EXPERIMENTAL && PCI && X86 && !X86_64 + depends on FB && EXPERIMENTAL && PCI && X86_32 select AGP select AGP_INTEL select FB_MODE_HELPERS @@ -761,7 +826,7 @@ config FB_I810_I2C config FB_INTEL tristate "Intel 830M/845G/852GM/855GM/865G support (EXPERIMENTAL)" - depends on FB && EXPERIMENTAL && PCI && X86 && !X86_64 + depends on FB && EXPERIMENTAL && PCI && X86 select AGP select AGP_INTEL select FB_MODE_HELPERS @@ -790,7 +855,6 @@ config FB_MATROX select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR select FB_TILEBLITTING select FB_MACMODES if PPC_PMAC ---help--- @@ -925,21 +989,6 @@ config FB_MATROX_MULTIHEAD There is no need for enabling 'Matrox multihead support' if you have only one Matrox card in the box. -config FB_RADEON_OLD - tristate "ATI Radeon display support (Old driver)" - depends on FB && PCI - select FB_CFB_FILLRECT - select FB_CFB_COPYAREA - select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR - select FB_MACMODES if PPC - help - Choose this option if you want to use an ATI Radeon graphics card as - a framebuffer device. There are both PCI and AGP versions. You - don't need to choose this to run the Radeon in plain VGA mode. - There is a product page at - . - config FB_RADEON tristate "ATI Radeon display support" depends on FB && PCI @@ -949,7 +998,6 @@ config FB_RADEON select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR select FB_MACMODES if PPC_OF help Choose this option if you want to use an ATI Radeon graphics card as @@ -965,6 +1013,7 @@ config FB_RADEON There is a product page at http://apps.ati.com/ATIcompare/ + config FB_RADEON_I2C bool "DDC/I2C for ATI Radeon support" depends on FB_RADEON @@ -972,6 +1021,14 @@ config FB_RADEON_I2C help Say Y here if you want DDC/I2C support for your Radeon board. +config FB_RADEON_BACKLIGHT + bool "Support for backlight control" + depends on FB_RADEON && PMAC_BACKLIGHT + select FB_BACKLIGHT + default y + help + Say Y here if you want to control the backlight of your display. + config FB_RADEON_DEBUG bool "Lots of debug output from Radeon driver" depends on FB_RADEON @@ -987,7 +1044,6 @@ config FB_ATY128 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR select FB_MACMODES if PPC_PMAC help This driver supports graphics boards with the ATI Rage128 chips. @@ -997,13 +1053,20 @@ config FB_ATY128 To compile this driver as a module, choose M here: the module will be called aty128fb. +config FB_ATY128_BACKLIGHT + bool "Support for backlight control" + depends on FB_ATY128 && PMAC_BACKLIGHT + select FB_BACKLIGHT + default y + help + Say Y here if you want to control the backlight of your display. + config FB_ATY tristate "ATI Mach64 display support" if PCI || ATARI - depends on FB + depends on FB && !SPARC32 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR select FB_MACMODES if PPC help This driver supports graphics boards with the ATI Mach64 chips. @@ -1029,12 +1092,6 @@ config FB_ATY_GENERIC_LCD Say Y if you have a laptop with an ATI Rage LT PRO, Rage Mobility, Rage XC, or Rage XL chipset. -config FB_ATY_XL_INIT - bool "Rage XL No-BIOS Init support" - depends on FB_ATY_CT - help - Say Y here to support booting a Rage XL without BIOS support. - config FB_ATY_GX bool "Mach64 GX support" if PCI depends on FB_ATY @@ -1046,6 +1103,20 @@ config FB_ATY_GX is at . +config FB_ATY_BACKLIGHT + bool "Support for backlight control" + depends on FB_ATY && PMAC_BACKLIGHT + select FB_BACKLIGHT + default y + help + Say Y here if you want to control the backlight of your display. + +config FB_S3TRIO + bool "S3 Trio display support" + depends on (FB = y) && PPC && BROKEN + help + If you have a S3 Trio say Y. Say N for S3 Virge. + config FB_SAVAGE tristate "S3 Savage support" depends on FB && PCI && EXPERIMENTAL @@ -1055,7 +1126,6 @@ config FB_SAVAGE select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help This driver supports notebooks and computers with S3 Savage PCI/AGP chips. @@ -1092,7 +1162,6 @@ config FB_SIS select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help This is the frame buffer device driver for the SiS 300, 315, 330 and 340 series as well as XGI V3XT, V5, V8, Z7 graphics chipsets. @@ -1122,7 +1191,6 @@ config FB_NEOMAGIC select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help This driver supports notebooks with NeoMagic PCI chips. Say Y if you have such a graphics card. @@ -1136,7 +1204,6 @@ config FB_KYRO select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help Say Y here if you have a STG4000 / Kyro / PowerVR 3 based graphics board. @@ -1150,7 +1217,6 @@ config FB_3DFX select FB_CFB_IMAGEBLIT select FB_CFB_FILLRECT select FB_CFB_COPYAREA - select FB_SOFT_CURSOR help This driver supports graphics boards with the 3Dfx Banshee/Voodoo3 chips. Say Y if you have such a graphics board. @@ -1172,7 +1238,6 @@ config FB_VOODOO1 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR ---help--- Say Y here if you have a 3Dfx Voodoo Graphics (Voodoo1/sst1) or Voodoo2 (cvg) based graphics card. @@ -1187,9 +1252,8 @@ config FB_VOODOO1 config FB_CYBLA tristate "Cyberblade/i1 support" - depends on FB && PCI + depends on FB && PCI && X86_32 && !64BIT select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR select VIDEO_SELECT ---help--- This driver is supposed to support the Trident Cyberblade/i1 @@ -1217,7 +1281,6 @@ config FB_TRIDENT select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR ---help--- This driver is supposed to support graphics boards with the Trident CyberXXXX/Image/CyberBlade chips mostly found in laptops @@ -1249,56 +1312,28 @@ config FB_PM3 similar boards, 3DLabs Permedia3 Create!, Appian Jeronimo 2000 and maybe other boards. -config FB_E1356 - tristate "Epson SED1356 framebuffer support" - depends on FB && EXPERIMENTAL && PCI && MIPS - -config PB1000_CRT - bool "Use CRT on Pb1000 (J65)" - depends on MIPS_PB1000=y && FB_E1356 - -config PB1000_NTSC - bool "Use Compsite NTSC on Pb1000 (J63)" - depends on MIPS_PB1000=y && FB_E1356 - -config PB1000_TFT - bool "Use TFT Panel on Pb1000 (J64)" - depends on MIPS_PB1000=y && FB_E1356 - -config PB1500_CRT - bool "Use CRT on Pb1500 " if MIPS_PB1500=y - depends on FB_E1356 - -config PB1500_CRT - prompt "Use CRT on Pb1100 " - depends on FB_E1356 && MIPS_PB1100=y - -config PB1500_TFT - bool "Use TFT Panel on Pb1500 " if MIPS_PB1500=y - depends on FB_E1356 - -config PB1500_TFT - prompt "Use TFT Panel on Pb1100 " - depends on FB_E1356 && MIPS_PB1100=y - config FB_AU1100 bool "Au1100 LCD Driver" depends on (FB = y) && EXPERIMENTAL && PCI && MIPS && MIPS_PB1100=y -source "drivers/video/geode/Kconfig" - -config FB_SBUS - bool "SBUS and UPA framebuffers" - depends on (FB = y) && (SPARC32 || SPARC64) +config FB_AU1200 + bool "Au1200 LCD Driver" + depends on FB && MIPS && SOC_AU1200 + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help - Say Y if you want support for SBUS or UPA based frame buffer device. + This is the framebuffer driver for the AMD Au1200 SOC. It can drive + various panels and CRTs by passing in kernel cmd line option + au1200fb:panel=. + +source "drivers/video/geode/Kconfig" config FB_FFB bool "Creator/Creator3D/Elite3D support" depends on FB_SBUS && SPARC64 select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help This is the frame buffer device driver for the Creator, Creator3D, and Elite3D graphics boards. @@ -1309,7 +1344,6 @@ config FB_TCX select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help This is the frame buffer device driver for the TCX 24/8bit frame buffer. @@ -1320,7 +1354,6 @@ config FB_CG14 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help This is the frame buffer device driver for the CGfourteen frame buffer on Desktop SPARCsystems with the SX graphics option. @@ -1331,7 +1364,6 @@ config FB_P9100 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help This is the frame buffer device driver for the P9100 card supported on Sparcbook 3 machines. @@ -1342,14 +1374,13 @@ config FB_LEO select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help This is the frame buffer device driver for the SBUS-based Sun ZX (leo) frame buffer cards. config FB_PCI bool "PCI framebuffers" - depends on (FB = y) && PCI && (SPARC64 || SPARC32) + depends on (FB = y) && PCI && SPARC config FB_IGA bool "IGA 168x display support" @@ -1357,7 +1388,6 @@ config FB_IGA select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help This is the framebuffer device for the INTERGRAPHICS 1680 and successor frame buffer cards. @@ -1368,40 +1398,36 @@ config FB_HIT select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help This is the frame buffer device driver for the Hitachi HD64461 LCD frame buffer card. config FB_PMAG_AA bool "PMAG-AA TURBOchannel framebuffer support" - depends on (FB = y) && MACH_DECSTATION && TC + depends on (FB = y) && TC select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help Support for the PMAG-AA TURBOchannel framebuffer card (1280x1024x1) used mainly in the MIPS-based DECstation series. config FB_PMAG_BA bool "PMAG-BA TURBOchannel framebuffer support" - depends on (FB = y) && MACH_DECSTATION && TC + depends on (FB = y) && TC select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help Support for the PMAG-BA TURBOchannel framebuffer card (1024x864x8) used mainly in the MIPS-based DECstation series. config FB_PMAGB_B bool "PMAGB-B TURBOchannel framebuffer support" - depends on (FB = y) && MACH_DECSTATION && TC + depends on (FB = y) && TC select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help Support for the PMAGB-B TURBOchannel framebuffer card used mainly in the MIPS-based DECstation series. The card is currently only @@ -1409,11 +1435,10 @@ config FB_PMAGB_B config FB_MAXINE bool "Maxine (Personal DECstation) onboard framebuffer support" - depends on (FB = y) && MACH_DECSTATION && TC + depends on (FB = y) && MACH_DECSTATION select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help Support for the onboard framebuffer (1024x768x8) in the Personal DECstation series (Personal DECstation 5000/20, /25, /33, /50, @@ -1425,7 +1450,6 @@ config FB_TX3912 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help The TX3912 is a Toshiba RISC processor based on the MIPS 3900 core see . @@ -1438,7 +1462,6 @@ config FB_G364 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help The G364 driver is the framebuffer used in MIPS Magnum 4000 and Olivetti M700-10 systems. @@ -1449,7 +1472,6 @@ config FB_68328 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help Say Y here if you want to support the built-in frame buffer of the Motorola 68328 CPU family. @@ -1460,31 +1482,13 @@ config FB_PXA select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR ---help--- Frame buffer driver for the built-in LCD controller in the Intel PXA2x0 processor. This driver is also available as a module ( = code which can be inserted and removed from the running kernel whenever you want). The - module will be called vfb. If you want to compile it as a module, - say M here and read . - - If unsure, say N. - -config FB_W100 - tristate "W100 frame buffer support" - depends on FB && PXA_SHARPSL - select FB_CFB_FILLRECT - select FB_CFB_COPYAREA - select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR - ---help--- - Frame buffer driver for the w100 as found on the Sharp SL-Cxx series. - - This driver is also available as a module ( = code which can be - inserted and removed from the running kernel whenever you want). The - module will be called vfb. If you want to compile it as a module, + module will be called pxafb. If you want to compile it as a module, say M here and read . If unsure, say N. @@ -1506,17 +1510,41 @@ config FB_PXA_PARAMETERS describes the available parameters. -config FB_S1D13XXX - tristate "Epson S1D13XXX framebuffer support" - depends on FB +config FB_MBX + tristate "2700G LCD framebuffer support" + depends on FB && ARCH_PXA select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR - help - Support for S1D13XXX framebuffer device family (currently only - working with S1D13806). Product specs at - + ---help--- + Framebuffer driver for the Intel 2700G (Marathon) Graphics + Accelerator + +config FB_MBX_DEBUG + bool "Enable debugging info via debugfs" + depends on FB_MBX && DEBUG_FS + default n + ---help--- + Enable this if you want debugging information using the debug + filesystem (debugfs) + + If unsure, say N. + +config FB_W100 + tristate "W100 frame buffer support" + depends on FB && PXA_SHARPSL + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + ---help--- + Frame buffer driver for the w100 as found on the Sharp SL-Cxx series. + + This driver is also available as a module ( = code which can be + inserted and removed from the running kernel whenever you want). The + module will be called w100fb. If you want to compile it as a module, + say M here and read . + + If unsure, say N. config FB_S3C2410 tristate "S3C2410 LCD framebuffer support" @@ -1524,7 +1552,6 @@ config FB_S3C2410 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR ---help--- Frame buffer driver for the built-in LCD controller in the Samsung S3C2410 processor. @@ -1542,13 +1569,27 @@ config FB_S3C2410_DEBUG Turn on debugging messages. Note that you can set/unset at run time through sysfs +config FB_PNX4008_DUM + tristate "Display Update Module support on Philips PNX4008 board" + depends on FB && ARCH_PNX4008 + ---help--- + Say Y here to enable support for PNX4008 Display Update Module (DUM) + +config FB_PNX4008_DUM_RGB + tristate "RGB Framebuffer support on Philips PNX4008 board" + depends on FB_PNX4008_DUM + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + ---help--- + Say Y here to enable support for PNX4008 RGB Framebuffer + config FB_VIRTUAL tristate "Virtual Frame Buffer support (ONLY FOR TESTING!)" depends on FB select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR ---help--- This is a `virtual' frame buffer device. It operates on a chunk of unswappable kernel memory instead of on the memory of a graphics @@ -1571,7 +1612,7 @@ if FB || SGI_NEWPORT_CONSOLE source "drivers/video/logo/Kconfig" endif -if FB && SYSFS +if SYSFS source "drivers/video/backlight/Kconfig" endif