X-Git-Url: http://ftp.safe.ca/?a=blobdiff_plain;f=drivers%2Fvideo%2FKconfig;h=5216c11d4decadf5d93c0876caea5d35d8a2e346;hb=57f17e8e15a8e392312450e28f80d6a90470e066;hp=ba757fb5a65793d1414679780918d6649b497f02;hpb=cb639258f92b2407c50f79a95364f42932481389;p=safe%2Fjmp%2Flinux-2.6 diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index ba757fb..5216c11 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -3,6 +3,21 @@ # menu "Graphics support" + depends on HAS_IOMEM + +source "drivers/video/backlight/Kconfig" +source "drivers/video/display/Kconfig" + +config VGASTATE + tristate + default n + +config VIDEO_OUTPUT_CONTROL + tristate "Lowlevel video output switch controls" + default m + help + This framework adds support for low-level control of the video + output switch. config FB tristate "Support for frame buffer devices" @@ -38,6 +53,29 @@ config FB (e.g. an accelerated X server) and that are not frame buffer device-aware may cause unexpected results. If unsure, say N. +config FIRMWARE_EDID + bool "Enable firmware EDID" + depends on FB + default n + ---help--- + This enables access to the EDID transferred from the firmware. + On the i386, this is from the Video BIOS. Enable this if DDC/I2C + transfers do not work for your driver and if you are using + nvidiafb, i810fb or savagefb. + + In general, choosing Y for this option is safe. If you + experience extremely long delays while booting before you get + something on your display, try setting this to N. Matrox cards in + combination with certain motherboards and monitors are known to + suffer from this problem. + +config FB_DDC + tristate + depends on FB + select I2C_ALGOBIT + select I2C + default n + config FB_CFB_FILLRECT tristate depends on FB @@ -65,11 +103,63 @@ config FB_CFB_IMAGEBLIT blitting. This is used by drivers that don't provide their own (accelerated) version. +config FB_SYS_FILLRECT + tristate + depends on FB + default n + ---help--- + Include the sys_fillrect function for generic software rectangle + filling. This is used by drivers that don't provide their own + (accelerated) version and the framebuffer is in system RAM. + +config FB_SYS_COPYAREA + tristate + depends on FB + default n + ---help--- + Include the sys_copyarea function for generic software area copying. + This is used by drivers that don't provide their own (accelerated) + version and the framebuffer is in system RAM. + +config FB_SYS_IMAGEBLIT + tristate + depends on FB + default n + ---help--- + Include the sys_imageblit function for generic software image + blitting. This is used by drivers that don't provide their own + (accelerated) version and the framebuffer is in system RAM. + +config FB_SYS_FOPS + tristate + depends on FB + default n + +config FB_DEFERRED_IO + bool + depends on FB + default y + +config FB_SVGALIB + tristate + depends on FB + default n + ---help--- + Common utility functions useful to fbdev drivers of VGA-based + cards. + config FB_MACMODES tristate depends on FB default n +config FB_BACKLIGHT + bool + depends on FB + select BACKLIGHT_LCD_SUPPORT + select BACKLIGHT_CLASS_DEVICE + default n + config FB_MODE_HELPERS bool "Enable Video Mode Handling Helpers" depends on FB @@ -99,6 +189,9 @@ config FB_TILEBLITTING This is particularly important to one driver, matroxfb. If unsure, say N. +comment "Frame buffer hardware drivers" + depends on FB + config FB_CIRRUS tristate "Cirrus Logic support" depends on FB && (ZORRO || PCI) @@ -148,9 +241,72 @@ config FB_ARMCLCD If you want to compile this as a module (=code which can be inserted into and removed from the running kernel), say M - here and read . The module + here and read . The module will be called amba-clcd. +choice + + depends on FB_ARMCLCD && (ARCH_LH7A40X || ARCH_LH7952X) + prompt "LCD Panel" + default FB_ARMCLCD_SHARP_LQ035Q7DB02 + +config FB_ARMCLCD_SHARP_LQ035Q7DB02_HRTFT + bool "LogicPD LCD 3.5\" QVGA w/HRTFT IC" + help + This is an implementation of the Sharp LQ035Q7DB02, a 3.5" + color QVGA, HRTFT panel. The LogicPD device includes + an integrated HRTFT controller IC. + The native resolution is 240x320. + +config FB_ARMCLCD_SHARP_LQ057Q3DC02 + bool "LogicPD LCD 5.7\" QVGA" + help + This is an implementation of the Sharp LQ057Q3DC02, a 5.7" + color QVGA, TFT panel. The LogicPD device includes an + The native resolution is 320x240. + +config FB_ARMCLCD_SHARP_LQ64D343 + bool "LogicPD LCD 6.4\" VGA" + help + This is an implementation of the Sharp LQ64D343, a 6.4" + color VGA, TFT panel. The LogicPD device includes an + The native resolution is 640x480. + +config FB_ARMCLCD_SHARP_LQ10D368 + bool "LogicPD LCD 10.4\" VGA" + help + This is an implementation of the Sharp LQ10D368, a 10.4" + color VGA, TFT panel. The LogicPD device includes an + The native resolution is 640x480. + + +config FB_ARMCLCD_SHARP_LQ121S1DG41 + bool "LogicPD LCD 12.1\" SVGA" + help + This is an implementation of the Sharp LQ121S1DG41, a 12.1" + color SVGA, TFT panel. The LogicPD device includes an + The native resolution is 800x600. + + This panel requires a clock rate may be an integer fraction + of the base LCDCLK frequency. The driver will select the + highest frequency available that is lower than the maximum + allowed. The panel may flicker if the clock rate is + slower than the recommended minimum. + +config FB_ARMCLCD_AUO_A070VW01_WIDE + bool "AU Optronics A070VW01 LCD 7.0\" WIDE" + help + This is an implementation of the AU Optronics, a 7.0" + WIDE Color. The native resolution is 234x480. + +config FB_ARMCLCD_HITACHI + bool "Hitachi Wide Screen 800x480" + help + This is an implementation of the Hitachi 800x480. + +endchoice + + config FB_ACORN bool "Acorn VIDC support" depends on (FB = y) && ARM && (ARCH_ACORN || ARCH_CLPS7500) @@ -256,42 +412,6 @@ config FB_AMIGA_AGA and CD32. If you intend to run Linux on any of these systems, say Y; otherwise say N. -config FB_CYBER - tristate "Amiga CyberVision 64 support" - depends on FB && ZORRO && BROKEN - select FB_CFB_FILLRECT - select FB_CFB_COPYAREA - select FB_CFB_IMAGEBLIT - help - This enables support for the Cybervision 64 graphics card from - Phase5. Please note that its use is not all that intuitive (i.e. if - you have any questions, be sure to ask!). Say N unless you have a - Cybervision 64 or plan to get one before you next recompile the - kernel. Please note that this driver DOES NOT support the - Cybervision 64/3D card, as they use incompatible video chips. - -config FB_VIRGE - bool "Amiga CyberVision 64/3D support " - depends on (FB = y) && ZORRO && BROKEN - select FB_CFB_FILLRECT - select FB_CFB_COPYAREA - select FB_CFB_IMAGEBLIT - help - This enables support for the Cybervision 64/3D graphics card from - Phase5. Please note that its use is not all that intuitive (i.e. if - you have any questions, be sure to ask!). Say N unless you have a - Cybervision 64/3D or plan to get one before you next recompile the - kernel. Please note that this driver DOES NOT support the older - Cybervision 64 card, as they use incompatible video chips. - -config FB_RETINAZ3 - tristate "Amiga Retina Z3 support" - depends on (FB = y) && ZORRO && BROKEN - help - This enables support for the Retina Z3 graphics card. Say N unless - you have a Retina Z3 or plan to get one before you next recompile - the kernel. - config FB_FM2 bool "Amiga FrameMaster II/Rainbow II support" depends on (FB = y) && ZORRO @@ -305,28 +425,32 @@ config FB_FM2 config FB_ARC tristate "Arc Monochrome LCD board support" depends on FB && X86 - select FB_CFB_FILLRECT - select FB_CFB_COPYAREA - select FB_CFB_IMAGEBLIT + select FB_SYS_FILLRECT + select FB_SYS_COPYAREA + select FB_SYS_IMAGEBLIT + select FB_SYS_FOPS help This enables support for the Arc Monochrome LCD board. The board is based on the KS-108 lcd controller and is typically a matrix of 2*n chips. This driver was tested with a 128x64 panel. This driver supports it for use with x86 SBCs through a 16 bit GPIO - interface (8 bit data, 8 bit control). If you anticpate using + interface (8 bit data, 8 bit control). If you anticipate using this driver, say Y or M; otherwise say N. You must specify the GPIO IO address to be used for setting control and data. config FB_ATARI bool "Atari native chipset support" - depends on (FB = y) && ATARI && BROKEN + depends on (FB = y) && ATARI + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT help This is the frame buffer device driver for the builtin graphics chipset found in Ataris. config FB_OF bool "Open Firmware frame buffer device support" - depends on (FB = y) && (PPC64 || PPC_OF) + depends on (FB = y) && (PPC64 || PPC_OF) && (!PPC_PSERIES || PCI) select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT @@ -337,7 +461,7 @@ config FB_OF config FB_CONTROL bool "Apple \"control\" display support" - depends on (FB = y) && PPC_PMAC + depends on (FB = y) && PPC_PMAC && PPC32 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT @@ -348,7 +472,7 @@ config FB_CONTROL config FB_PLATINUM bool "Apple \"platinum\" display support" - depends on (FB = y) && PPC_PMAC + depends on (FB = y) && PPC_PMAC && PPC32 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT @@ -359,7 +483,7 @@ config FB_PLATINUM config FB_VALKYRIE bool "Apple \"valkyrie\" display support" - depends on (FB = y) && (MAC || PPC_PMAC) + depends on (FB = y) && (MAC || (PPC_PMAC && PPC32)) select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT @@ -370,7 +494,7 @@ config FB_VALKYRIE config FB_CT65550 bool "Chips 65550 display support" - depends on (FB = y) && PPC + depends on (FB = y) && PPC32 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT @@ -384,6 +508,8 @@ config FB_ASILIANT select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + help + This is the frame buffer device driver for the Asiliant 69030 chipset config FB_IMSTT bool "IMS Twin Turbo display support" @@ -400,6 +526,8 @@ config FB_VGA16 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select VGASTATE + select FONT_8x16 if FRAMEBUFFER_CONSOLE help This is the frame buffer device driver for VGA 16 color graphic cards. Say Y if you have such a card. @@ -444,14 +572,25 @@ config FB_HP300 default y config FB_TGA - tristate "TGA framebuffer support" - depends on FB && ALPHA + tristate "TGA/SFB+ framebuffer support" + depends on FB && (ALPHA || TC) select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - help - This is the frame buffer device driver for generic TGA graphic - cards. Say Y if you have one of those. + select BITREVERSE + ---help--- + This is the frame buffer device driver for generic TGA and SFB+ + graphic cards. These include DEC ZLXp-E1, -E2 and -E3 PCI cards, + also known as PBXGA-A, -B and -C, and DEC ZLX-E1, -E2 and -E3 + TURBOchannel cards, also known as PMAGD-A, -B and -C. + + Due to hardware limitations ZLX-E2 and E3 cards are not supported + for DECstation 5000/200 systems. Additionally due to firmware + limitations these cards may cause troubles with booting DECstation + 5000/240 and /260 systems, but are fully supported under Linux if + you manage to get it going. ;-) + + Say Y if you have one of those. config FB_VESA bool "VESA VGA graphics support" @@ -459,16 +598,36 @@ config FB_VESA select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select VIDEO_SELECT help This is the frame buffer device driver for generic VESA 2.0 compliant graphic cards. The older VESA 1.2 cards are not supported. You will get a boot time penguin logo at no additional cost. Please read . If unsure, say Y. -config VIDEO_SELECT - bool - depends on FB_VESA - default y +config FB_IMAC + bool "Intel-based Macintosh Framebuffer Support" + depends on (FB = y) && X86 && EFI + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + help + This is the frame buffer device driver for the Intel-based Macintosh + +config FB_HECUBA + tristate "Hecuba board support" + depends on FB && X86 && MMU + select FB_SYS_FILLRECT + select FB_SYS_COPYAREA + select FB_SYS_IMAGEBLIT + select FB_SYS_FOPS + select FB_DEFERRED_IO + help + This enables support for the Hecuba board. This driver was tested + with an E-Ink 800x600 display and x86 SBCs through a 16 bit GPIO + interface (8 bit data, 4 bit control). If you anticpate using + this driver, say Y or M; otherwise say N. You must specify the + GPIO IO address to be used for setting control and data. config FB_HGA tristate "Hercules mono graphics support" @@ -492,12 +651,6 @@ config FB_HGA_ACCEL This will compile the Hercules mono graphics with acceleration functions. - -config VIDEO_SELECT - bool - depends on (FB = y) && X86 - default y - config FB_SGIVW tristate "SGI Visual Workstation framebuffer support" depends on FB && X86_VISWS @@ -520,20 +673,11 @@ config FB_GBE config FB_GBE_MEM int "Video memory size in MB" depends on FB_GBE - default 8 + default 4 help This is the amount of memory reserved for the framebuffer, which can be any value between 1MB and 8MB. -config BUS_I2C - bool - depends on (FB = y) && VISWS - default y - -config FB_SUN3 - bool "Sun3 framebuffer support" - depends on (FB = y) && (SUN3 || SUN3X) && BROKEN - config FB_SBUS bool "SBUS and UPA framebuffers" depends on (FB = y) && SPARC @@ -542,7 +686,7 @@ config FB_SBUS config FB_BW2 bool "BWtwo support" - depends on (FB = y) && (SPARC && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3) + depends on (FB = y) && (SPARC && FB_SBUS) select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT @@ -551,7 +695,7 @@ config FB_BW2 config FB_CG3 bool "CGthree support" - depends on (FB = y) && (SPARC && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3) + depends on (FB = y) && (SPARC && FB_SBUS) select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT @@ -560,13 +704,98 @@ config FB_CG3 config FB_CG6 bool "CGsix (GX,TurboGX) support" - depends on (FB = y) && (SPARC && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3) + depends on (FB = y) && (SPARC && FB_SBUS) select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT help This is the frame buffer device driver for the CGsix (GX, TurboGX) frame buffer. +config FB_FFB + bool "Creator/Creator3D/Elite3D support" + depends on FB_SBUS && SPARC64 + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + help + This is the frame buffer device driver for the Creator, Creator3D, + and Elite3D graphics boards. + +config FB_TCX + bool "TCX (SS4/SS5 only) support" + depends on FB_SBUS + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + help + This is the frame buffer device driver for the TCX 24/8bit frame + buffer. + +config FB_CG14 + bool "CGfourteen (SX) support" + depends on FB_SBUS + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + help + This is the frame buffer device driver for the CGfourteen frame + buffer on Desktop SPARCsystems with the SX graphics option. + +config FB_P9100 + bool "P9100 (Sparcbook 3 only) support" + depends on FB_SBUS + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + help + This is the frame buffer device driver for the P9100 card + supported on Sparcbook 3 machines. + +config FB_LEO + bool "Leo (ZX) support" + depends on FB_SBUS + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + help + This is the frame buffer device driver for the SBUS-based Sun ZX + (leo) frame buffer cards. + +config FB_IGA + bool "IGA 168x display support" + depends on (FB = y) && SPARC32 + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + help + This is the framebuffer device for the INTERGRAPHICS 1680 and + successor frame buffer cards. + +config FB_XVR500 + bool "Sun XVR-500 3DLABS Wildcat support" + depends on (FB = y) && PCI && SPARC64 + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + help + This is the framebuffer device for the Sun XVR-500 and similar + graphics cards based upon the 3DLABS Wildcat chipset. The driver + only works on sparc64 systems where the system firwmare has + mostly initialized the card already. It is treated as a + completely dumb framebuffer device. + +config FB_XVR2500 + bool "Sun XVR-2500 3DLABS Wildcat support" + depends on (FB = y) && PCI && SPARC64 + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + help + This is the framebuffer device for the Sun XVR-2500 and similar + graphics cards based upon the 3DLABS Wildcat chipset. The driver + only works on sparc64 systems where the system firwmare has + mostly initialized the card already. It is treated as a + completely dumb framebuffer device. + config FB_PVR2 tristate "NEC PowerVR 2 display support" depends on FB && SH_DREAMCAST @@ -590,7 +819,7 @@ config FB_PVR2 config FB_EPSON1355 bool "Epson 1355 framebuffer support" - depends on (FB = y) && (SUPERH || ARCH_CEIVA) + depends on (FB = y) && ARCH_CEIVA select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT @@ -611,15 +840,42 @@ config FB_S1D13XXX working with S1D13806). Product specs at +config FB_ATMEL + tristate "AT91/AT32 LCD Controller support" + depends on FB && (ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || AVR32) + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + help + This enables support for the AT91/AT32 LCD Controller. + +config FB_INTSRAM + bool "Frame Buffer in internal SRAM" + depends on FB_ATMEL && ARCH_AT91SAM9261 + help + Say Y if you want to map Frame Buffer in internal SRAM. Say N if you want + to let frame buffer in external SDRAM. + +config FB_ATMEL_STN + bool "Use a STN display with AT91/AT32 LCD Controller" + depends on FB_ATMEL && MACH_AT91SAM9261EK + default n + help + Say Y if you want to connect a STN LCD display to the AT91/AT32 LCD + Controller. Say N if you want to connect a TFT. + + If unsure, say N. + config FB_NVIDIA tristate "nVidia Framebuffer Support" depends on FB && PCI - select I2C_ALGOBIT if FB_NVIDIA_I2C - select I2C if FB_NVIDIA_I2C + select FB_BACKLIGHT if FB_NVIDIA_BACKLIGHT select FB_MODE_HELPERS select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select BITREVERSE + select VGASTATE help This driver supports graphics boards with the nVidia chips, TNT and newer. For very old chipsets, such as the RIVA128, then use @@ -632,6 +888,7 @@ config FB_NVIDIA config FB_NVIDIA_I2C bool "Enable DDC Support" depends on FB_NVIDIA + select FB_DDC help This enables I2C support for nVidia Chipsets. This is used only for getting EDID information from the attached display @@ -641,15 +898,32 @@ config FB_NVIDIA_I2C independently validate video mode parameters, you should say Y here. +config FB_NVIDIA_DEBUG + bool "Lots of debug output" + depends on FB_NVIDIA + default n + help + Say Y here if you want the nVidia driver to output all sorts + of debugging information to provide to the maintainer when + something goes wrong. + +config FB_NVIDIA_BACKLIGHT + bool "Support for backlight control" + depends on FB_NVIDIA + default y + help + Say Y here if you want to control the backlight of your display. + config FB_RIVA tristate "nVidia Riva support" depends on FB && PCI - select I2C_ALGOBIT if FB_RIVA_I2C - select I2C if FB_RIVA_I2C + select FB_BACKLIGHT if FB_RIVA_BACKLIGHT select FB_MODE_HELPERS select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select BITREVERSE + select VGASTATE help This driver supports graphics boards with the nVidia Riva/Geforce chips. @@ -661,6 +935,7 @@ config FB_RIVA config FB_RIVA_I2C bool "Enable DDC Support" depends on FB_RIVA + select FB_DDC help This enables I2C support for nVidia Chipsets. This is used only for getting EDID information from the attached display @@ -671,14 +946,21 @@ config FB_RIVA_I2C here. config FB_RIVA_DEBUG - bool "Lots of debug output from Riva(nVidia) driver" + bool "Lots of debug output" depends on FB_RIVA default n help Say Y here if you want the Riva driver to output all sorts - of debugging informations to provide to the maintainer when + of debugging information to provide to the maintainer when something goes wrong. +config FB_RIVA_BACKLIGHT + bool "Support for backlight control" + depends on FB_RIVA + default y + help + Say Y here if you want to control the backlight of your display. + config FB_I810 tristate "Intel 810/815 support (EXPERIMENTAL)" depends on FB && EXPERIMENTAL && PCI && X86_32 @@ -688,6 +970,7 @@ config FB_I810 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select VGASTATE help This driver supports the on-board graphics built in to the Intel 810 and 815 chipsets. Say Y if you have and plan to use such a board. @@ -724,13 +1007,28 @@ config FB_I810_GTF config FB_I810_I2C bool "Enable DDC Support" depends on FB_I810 && FB_I810_GTF - select I2C - select I2C_ALGOBIT + select FB_DDC + help + +config FB_LE80578 + tristate "Intel LE80578 (Vermilion) support" + depends on FB && PCI && X86 + select FB_MODE_HELPERS + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + help + This driver supports the LE80578 (Vermilion Range) chipset + +config FB_CARILLO_RANCH + tristate "Intel Carillo Ranch support" + depends on FB_LE80578 && FB && PCI && X86 help + This driver supports the LE80578 (Carillo Ranch) board config FB_INTEL - tristate "Intel 830M/845G/852GM/855GM/865G support (EXPERIMENTAL)" - depends on FB && EXPERIMENTAL && PCI && X86_32 + tristate "Intel 830M/845G/852GM/855GM/865G/915G/945G support (EXPERIMENTAL)" + depends on FB && EXPERIMENTAL && PCI && X86 select AGP select AGP_INTEL select FB_MODE_HELPERS @@ -739,20 +1037,37 @@ config FB_INTEL select FB_CFB_IMAGEBLIT help This driver supports the on-board graphics built in to the Intel - 830M/845G/852GM/855GM/865G chipsets. + 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM chipsets. Say Y if you have and plan to use such a board. - To compile this driver as a module, choose M here: the + If you say Y here and want DDC/I2C support you must first say Y to + "I2C support" and "I2C bit-banging support" in the character devices + section. + + If you say M here then "I2C support" and "I2C bit-banging support" + can be build either as modules or built-in. + + To compile this driver as a module, choose M here: the module will be called intelfb. + For more information, please read + config FB_INTEL_DEBUG - bool "Intel driver Debug Messages" + bool "Intel driver Debug Messages" depends on FB_INTEL ---help--- Say Y here if you want the Intel driver to output all sorts - of debugging informations to provide to the maintainer when + of debugging information to provide to the maintainer when something goes wrong. +config FB_INTEL_I2C + bool "DDC/I2C for Intel framebuffer support" + depends on FB_INTEL + select FB_DDC + default y + help + Say Y here if you want DDC/I2C support for your on-board Intel graphics. + config FB_MATROX tristate "Matrox acceleration" depends on FB && PCI @@ -827,8 +1142,8 @@ config FB_MATROX_G config FB_MATROX_I2C tristate "Matrox I2C support" - depends on FB_MATROX && I2C - select I2C_ALGOBIT + depends on FB_MATROX + select FB_DDC ---help--- This drivers creates I2C buses which are needed for accessing the DDC (I2C) bus present on all Matroxes, an I2C bus which @@ -893,25 +1208,10 @@ config FB_MATROX_MULTIHEAD There is no need for enabling 'Matrox multihead support' if you have only one Matrox card in the box. -config FB_RADEON_OLD - tristate "ATI Radeon display support (Old driver)" - depends on FB && PCI - select FB_CFB_FILLRECT - select FB_CFB_COPYAREA - select FB_CFB_IMAGEBLIT - select FB_MACMODES if PPC - help - Choose this option if you want to use an ATI Radeon graphics card as - a framebuffer device. There are both PCI and AGP versions. You - don't need to choose this to run the Radeon in plain VGA mode. - There is a product page at - . - config FB_RADEON tristate "ATI Radeon display support" depends on FB && PCI - select I2C_ALGOBIT if FB_RADEON_I2C - select I2C if FB_RADEON_I2C + select FB_BACKLIGHT if FB_RADEON_BACKLIGHT select FB_MODE_HELPERS select FB_CFB_FILLRECT select FB_CFB_COPYAREA @@ -931,20 +1231,29 @@ config FB_RADEON There is a product page at http://apps.ati.com/ATIcompare/ + config FB_RADEON_I2C bool "DDC/I2C for ATI Radeon support" depends on FB_RADEON + select FB_DDC default y help Say Y here if you want DDC/I2C support for your Radeon board. +config FB_RADEON_BACKLIGHT + bool "Support for backlight control" + depends on FB_RADEON + default y + help + Say Y here if you want to control the backlight of your display. + config FB_RADEON_DEBUG bool "Lots of debug output from Radeon driver" depends on FB_RADEON default n help Say Y here if you want the Radeon driver to output all sorts - of debugging informations to provide to the maintainer when + of debugging information to provide to the maintainer when something goes wrong. config FB_ATY128 @@ -953,6 +1262,7 @@ config FB_ATY128 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select FB_BACKLIGHT if FB_ATY128_BACKLIGHT select FB_MACMODES if PPC_PMAC help This driver supports graphics boards with the ATI Rage128 chips. @@ -962,12 +1272,20 @@ config FB_ATY128 To compile this driver as a module, choose M here: the module will be called aty128fb. +config FB_ATY128_BACKLIGHT + bool "Support for backlight control" + depends on FB_ATY128 + default y + help + Say Y here if you want to control the backlight of your display. + config FB_ATY tristate "ATI Mach64 display support" if PCI || ATARI - depends on FB + depends on FB && !SPARC32 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select FB_BACKLIGHT if FB_ATY_BACKLIGHT select FB_MACMODES if PPC help This driver supports graphics boards with the ATI Mach64 chips. @@ -979,7 +1297,7 @@ config FB_ATY config FB_ATY_CT bool "Mach64 CT/VT/GT/LT (incl. 3D RAGE) support" depends on PCI && FB_ATY - default y if SPARC64 && FB_PCI + default y if SPARC64 && PCI help Say Y here to support use of ATI's 64-bit Rage boards (or other boards based on the Mach64 CT, VT, GT, and LT chipsets) as a @@ -1004,21 +1322,34 @@ config FB_ATY_GX is at . -config FB_S3TRIO - bool "S3 Trio display support" - depends on (FB = y) && PPC && BROKEN +config FB_ATY_BACKLIGHT + bool "Support for backlight control" + depends on FB_ATY + default y help - If you have a S3 Trio say Y. Say N for S3 Virge. + Say Y here if you want to control the backlight of your display. + +config FB_S3 + tristate "S3 Trio/Virge support" + depends on FB && PCI + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + select FB_TILEBLITTING + select FB_SVGALIB + select VGASTATE + select FONT_8x16 if FRAMEBUFFER_CONSOLE + ---help--- + Driver for graphics boards with S3 Trio / S3 Virge chip. config FB_SAVAGE tristate "S3 Savage support" depends on FB && PCI && EXPERIMENTAL - select I2C_ALGOBIT if FB_SAVAGE_I2C - select I2C if FB_SAVAGE_I2C select FB_MODE_HELPERS select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select VGASTATE help This driver supports notebooks and computers with S3 Savage PCI/AGP chips. @@ -1031,6 +1362,7 @@ config FB_SAVAGE config FB_SAVAGE_I2C bool "Enable DDC2 Support" depends on FB_SAVAGE + select FB_DDC help This enables I2C support for S3 Savage Chipsets. This is used only for getting EDID information from the attached display @@ -1084,6 +1416,7 @@ config FB_NEOMAGIC select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select VGASTATE help This driver supports notebooks with NeoMagic PCI chips. Say Y if you have such a graphics card. @@ -1143,6 +1476,20 @@ config FB_VOODOO1 Please read the for supported options and other important info support. +config FB_VT8623 + tristate "VIA VT8623 support" + depends on FB && PCI + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + select FB_TILEBLITTING + select FB_SVGALIB + select VGASTATE + select FONT_8x16 if FRAMEBUFFER_CONSOLE + ---help--- + Driver for CastleRock integrated graphics core in the + VIA VT8623 [Apollo CLE266] chipset. + config FB_CYBLA tristate "Cyberblade/i1 support" depends on FB && PCI && X86_32 && !64BIT @@ -1196,83 +1543,55 @@ config FB_TRIDENT_ACCEL This will compile the Trident frame buffer device with acceleration functions. -config FB_PM3 - tristate "Permedia3 support" - depends on FB && PCI && BROKEN - help - This is the frame buffer device driver for the 3DLabs Permedia3 - chipset, used in Formac ProFormance III, 3DLabs Oxygen VX1 & - similar boards, 3DLabs Permedia3 Create!, Appian Jeronimo 2000 - and maybe other boards. - -config FB_AU1100 - bool "Au1100 LCD Driver" - depends on (FB = y) && EXPERIMENTAL && PCI && MIPS && MIPS_PB1100=y - -source "drivers/video/geode/Kconfig" - -config FB_FFB - bool "Creator/Creator3D/Elite3D support" - depends on FB_SBUS && SPARC64 - select FB_CFB_COPYAREA - select FB_CFB_IMAGEBLIT - help - This is the frame buffer device driver for the Creator, Creator3D, - and Elite3D graphics boards. - -config FB_TCX - bool "TCX (SS4/SS5 only) support" - depends on FB_SBUS +config FB_ARK + tristate "ARK 2000PV support" + depends on FB && PCI select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - help - This is the frame buffer device driver for the TCX 24/8bit frame - buffer. + select FB_TILEBLITTING + select FB_SVGALIB + select VGASTATE + select FONT_8x16 if FRAMEBUFFER_CONSOLE + ---help--- + Driver for PCI graphics boards with ARK 2000PV chip + and ICS 5342 RAMDAC. -config FB_CG14 - bool "CGfourteen (SX) support" - depends on FB_SBUS +config FB_PM3 + tristate "Permedia3 support (EXPERIMENTAL)" + depends on FB && PCI && EXPERIMENTAL select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT help - This is the frame buffer device driver for the CGfourteen frame - buffer on Desktop SPARCsystems with the SX graphics option. + This is the frame buffer device driver for the 3DLabs Permedia3 + chipset, used in Formac ProFormance III, 3DLabs Oxygen VX1 & + similar boards, 3DLabs Permedia3 Create!, Appian Jeronimo 2000 + and maybe other boards. -config FB_P9100 - bool "P9100 (Sparcbook 3 only) support" - depends on FB_SBUS +config FB_AU1100 + bool "Au1100 LCD Driver" + depends on (FB = y) && MIPS && SOC_AU1100 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT help - This is the frame buffer device driver for the P9100 card - supported on Sparcbook 3 machines. + This is the framebuffer driver for the AMD Au1100 SOC. It can drive + various panels and CRTs by passing in kernel cmd line option + au1100fb:panel=. -config FB_LEO - bool "Leo (ZX) support" - depends on FB_SBUS +config FB_AU1200 + bool "Au1200 LCD Driver" + depends on (FB = y) && MIPS && SOC_AU1200 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT help - This is the frame buffer device driver for the SBUS-based Sun ZX - (leo) frame buffer cards. - -config FB_PCI - bool "PCI framebuffers" - depends on (FB = y) && PCI && SPARC + This is the framebuffer driver for the AMD Au1200 SOC. It can drive + various panels and CRTs by passing in kernel cmd line option + au1200fb:panel=. -config FB_IGA - bool "IGA 168x display support" - depends on SPARC32 && FB_PCI - select FB_CFB_FILLRECT - select FB_CFB_COPYAREA - select FB_CFB_IMAGEBLIT - help - This is the framebuffer device for the INTERGRAPHICS 1680 and - successor frame buffer cards. +source "drivers/video/geode/Kconfig" config FB_HIT tristate "HD64461 Frame Buffer support" @@ -1295,8 +1614,8 @@ config FB_PMAG_AA used mainly in the MIPS-based DECstation series. config FB_PMAG_BA - bool "PMAG-BA TURBOchannel framebuffer support" - depends on (FB = y) && TC + tristate "PMAG-BA TURBOchannel framebuffer support" + depends on FB && TC select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT @@ -1305,8 +1624,8 @@ config FB_PMAG_BA used mainly in the MIPS-based DECstation series. config FB_PMAGB_B - bool "PMAGB-B TURBOchannel framebuffer support" - depends on (FB = y) && TC + tristate "PMAGB-B TURBOchannel framebuffer support" + depends on TC select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT @@ -1326,18 +1645,6 @@ config FB_MAXINE DECstation series (Personal DECstation 5000/20, /25, /33, /50, Codename "Maxine"). -config FB_TX3912 - bool "TMPTX3912/PR31700 frame buffer support" - depends on (FB = y) && NINO - select FB_CFB_FILLRECT - select FB_CFB_COPYAREA - select FB_CFB_IMAGEBLIT - help - The TX3912 is a Toshiba RISC processor based on the MIPS 3900 core - see . - - Say Y here to enable kernel support for the on-board framebuffer. - config FB_G364 bool "G364 frame buffer support" depends on (FB = y) && (MIPS_MAGNUM_4000 || OLIVETTI_M700) @@ -1350,7 +1657,7 @@ config FB_G364 config FB_68328 bool "Motorola 68328 native frame buffer support" - depends on FB && (M68328 || M68EZ328 || M68VZ328) + depends on (FB = y) && (M68328 || M68EZ328 || M68VZ328) select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT @@ -1370,8 +1677,8 @@ config FB_PXA This driver is also available as a module ( = code which can be inserted and removed from the running kernel whenever you want). The - module will be called vfb. If you want to compile it as a module, - say M here and read . + module will be called pxafb. If you want to compile it as a module, + say M here and read . If unsure, say N. @@ -1392,6 +1699,26 @@ config FB_PXA_PARAMETERS describes the available parameters. +config FB_MBX + tristate "2700G LCD framebuffer support" + depends on FB && ARCH_PXA + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + ---help--- + Framebuffer driver for the Intel 2700G (Marathon) Graphics + Accelerator + +config FB_MBX_DEBUG + bool "Enable debugging info via debugfs" + depends on FB_MBX && DEBUG_FS + default n + ---help--- + Enable this if you want debugging information using the debug + filesystem (debugfs) + + If unsure, say N. + config FB_W100 tristate "W100 frame buffer support" depends on FB && PXA_SHARPSL @@ -1403,8 +1730,8 @@ config FB_W100 This driver is also available as a module ( = code which can be inserted and removed from the running kernel whenever you want). The - module will be called vfb. If you want to compile it as a module, - say M here and read . + module will be called w100fb. If you want to compile it as a module, + say M here and read . If unsure, say N. @@ -1421,7 +1748,7 @@ config FB_S3C2410 This driver is also available as a module ( = code which can be inserted and removed from the running kernel whenever you want). The module will be called s3c2410fb. If you want to compile it as a module, - say M here and read . + say M here and read . If unsure, say N. config FB_S3C2410_DEBUG @@ -1431,13 +1758,93 @@ config FB_S3C2410_DEBUG Turn on debugging messages. Note that you can set/unset at run time through sysfs -config FB_VIRTUAL - tristate "Virtual Frame Buffer support (ONLY FOR TESTING!)" - depends on FB +config FB_SM501 + tristate "Silicon Motion SM501 framebuffer support" + depends on FB && MFD_SM501 + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + ---help--- + Frame buffer driver for the CRT and LCD controllers in the Silicon + Motion SM501. + + This driver is also available as a module ( = code which can be + inserted and removed from the running kernel whenever you want). The + module will be called sm501fb. If you want to compile it as a module, + say M here and read . + + If unsure, say N. + + +config FB_PNX4008_DUM + tristate "Display Update Module support on Philips PNX4008 board" + depends on FB && ARCH_PNX4008 + ---help--- + Say Y here to enable support for PNX4008 Display Update Module (DUM) + +config FB_PNX4008_DUM_RGB + tristate "RGB Framebuffer support on Philips PNX4008 board" + depends on FB_PNX4008_DUM + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + ---help--- + Say Y here to enable support for PNX4008 RGB Framebuffer + +config FB_IBM_GXT4500 + tristate "Framebuffer support for IBM GXT4500P adaptor" + depends on PPC + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + ---help--- + Say Y here to enable support for the IBM GXT4500P display + adaptor, found on some IBM System P (pSeries) machines. + +config FB_PS3 + tristate "PS3 GPU framebuffer driver" + depends on FB && PS3_PS3AV + select FB_SYS_FILLRECT + select FB_SYS_COPYAREA + select FB_SYS_IMAGEBLIT + select FB_SYS_FOPS + select VT_HW_CONSOLE_BINDING if FRAMEBUFFER_CONSOLE + ---help--- + Include support for the virtual frame buffer in the PS3 platform. + +config FB_PS3_DEFAULT_SIZE_M + int "PS3 default frame buffer size (in MiB)" + depends on FB_PS3 + default 9 + ---help--- + This is the default size (in MiB) of the virtual frame buffer in + the PS3. + The default value can be overridden on the kernel command line + using the "ps3fb" option (e.g. "ps3fb=9M"); + +config FB_XILINX + tristate "Xilinx frame buffer support" + depends on FB && XILINX_VIRTEX select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT ---help--- + Include support for the Xilinx ML300/ML403 reference design + framebuffer. ML300 carries a 640*480 LCD display on the board, + ML403 uses a standard DB15 VGA connector. + +if ARCH_OMAP + source "drivers/video/omap/Kconfig" +endif + +config FB_VIRTUAL + tristate "Virtual Frame Buffer support (ONLY FOR TESTING!)" + depends on FB + select FB_SYS_FILLRECT + select FB_SYS_COPYAREA + select FB_SYS_IMAGEBLIT + select FB_SYS_FOPS + ---help--- This is a `virtual' frame buffer device. It operates on a chunk of unswappable kernel memory instead of on the memory of a graphics board. This means you cannot see any output sent to this frame @@ -1448,9 +1855,11 @@ config FB_VIRTUAL kernel option `video=vfb:'. To compile this driver as a module, choose M here: the - module will be called vfb. + module will be called vfb. In order to load it, you must use + the vfb_enable=1 option. If unsure, say N. + if VT source "drivers/video/console/Kconfig" endif @@ -1459,9 +1868,5 @@ if FB || SGI_NEWPORT_CONSOLE source "drivers/video/logo/Kconfig" endif -if FB && SYSFS - source "drivers/video/backlight/Kconfig" -endif - endmenu