X-Git-Url: http://ftp.safe.ca/?a=blobdiff_plain;f=drivers%2Fusb%2Fserial%2Fpl2303.c;h=28037c1af93ec01203389d63fafafd402ff28984;hb=684c6e30d389f67ef727c8f5a7b23a09b4cb02e4;hp=5027ae9afaab3ba246685fe26523e53787323cbe;hpb=715f9527c1c1edd1a9c7a55ab4535211279c9374;p=safe%2Fjmp%2Flinux-2.6

diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 5027ae9..28037c1 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -1,16 +1,17 @@
 /*
  * Prolific PL2303 USB to serial adaptor driver
  *
- * Copyright (C) 2001-2004 Greg Kroah-Hartman (greg@kroah.com)
+ * Copyright (C) 2001-2007 Greg Kroah-Hartman (greg@kroah.com)
  * Copyright (C) 2003 IBM Corp.
  *
  * Original driver for 2.2.x by anonymous
  *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License.
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License version
+ *	2 as published by the Free Software Foundation.
  *
- * See Documentation/usb/usb-serial.txt for more information on using this driver
+ * See Documentation/usb/usb-serial.txt for more information on using this
+ * driver
  *
  */
 
@@ -25,7 +26,7 @@
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/spinlock.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
 #include <linux/usb.h>
 #include <linux/usb/serial.h>
 #include "pl2303.h"
@@ -39,23 +40,18 @@ static int debug;
 
 #define PL2303_CLOSING_WAIT	(30*HZ)
 
-#define PL2303_BUF_SIZE		1024
-#define PL2303_TMP_BUF_SIZE	1024
-
-struct pl2303_buf {
-	unsigned int	buf_size;
-	char		*buf_buf;
-	char		*buf_get;
-	char		*buf_put;
-};
-
-static struct usb_device_id id_table [] = {
+static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID) },
 	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_RSAQ2) },
 	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_DCU11) },
 	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_RSAQ3) },
 	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_PHAROS) },
+	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_ALDIGA) },
+	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_MMX) },
+	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_GPRS) },
+	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_HCR331) },
 	{ USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID) },
+	{ USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID_RSAQ5) },
 	{ USB_DEVICE(ATEN_VENDOR_ID, ATEN_PRODUCT_ID) },
 	{ USB_DEVICE(ATEN_VENDOR_ID2, ATEN_PRODUCT_ID) },
 	{ USB_DEVICE(ELCOM_VENDOR_ID, ELCOM_PRODUCT_ID) },
@@ -73,6 +69,8 @@ static struct usb_device_id id_table [] = {
 	{ USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_SX1) },
 	{ USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_X65) },
 	{ USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_X75) },
+	{ USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_EF81) },
+	{ USB_DEVICE(BENQ_VENDOR_ID, BENQ_PRODUCT_ID_S81) }, /* Benq/Siemens S81 */
 	{ USB_DEVICE(SYNTECH_VENDOR_ID, SYNTECH_PRODUCT_ID) },
 	{ USB_DEVICE(NOKIA_CA42_VENDOR_ID, NOKIA_CA42_PRODUCT_ID) },
 	{ USB_DEVICE(CA_42_CA42_VENDOR_ID, CA_42_CA42_PRODUCT_ID) },
@@ -82,8 +80,15 @@ static struct usb_device_id id_table [] = {
 	{ USB_DEVICE(DATAPILOT_U2_VENDOR_ID, DATAPILOT_U2_PRODUCT_ID) },
 	{ USB_DEVICE(BELKIN_VENDOR_ID, BELKIN_PRODUCT_ID) },
 	{ USB_DEVICE(ALCOR_VENDOR_ID, ALCOR_PRODUCT_ID) },
-	{ USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_ID) },
 	{ USB_DEVICE(WS002IN_VENDOR_ID, WS002IN_PRODUCT_ID) },
+	{ USB_DEVICE(COREGA_VENDOR_ID, COREGA_PRODUCT_ID) },
+	{ USB_DEVICE(YCCABLE_VENDOR_ID, YCCABLE_PRODUCT_ID) },
+	{ USB_DEVICE(SUPERIAL_VENDOR_ID, SUPERIAL_PRODUCT_ID) },
+	{ USB_DEVICE(HP_VENDOR_ID, HP_LD220_PRODUCT_ID) },
+	{ USB_DEVICE(CRESSI_VENDOR_ID, CRESSI_EDY_PRODUCT_ID) },
+	{ USB_DEVICE(SONY_VENDOR_ID, SONY_QN3USB_PRODUCT_ID) },
+	{ USB_DEVICE(SANWA_VENDOR_ID, SANWA_PRODUCT_ID) },
+	{ USB_DEVICE(ADLINK_VENDOR_ID, ADLINK_ND6530_PRODUCT_ID) },
 	{ }					/* Terminating entry */
 };
 
@@ -94,7 +99,10 @@ static struct usb_driver pl2303_driver = {
 	.probe =	usb_serial_probe,
 	.disconnect =	usb_serial_disconnect,
 	.id_table =	id_table,
+	.suspend =      usb_serial_suspend,
+	.resume =       usb_serial_resume,
 	.no_dynamic_id = 	1,
+	.supports_autosuspend =	1,
 };
 
 #define SET_LINE_REQUEST_TYPE		0x21
@@ -106,7 +114,7 @@ static struct usb_driver pl2303_driver = {
 #define CONTROL_RTS			0x02
 
 #define BREAK_REQUEST_TYPE		0x21
-#define BREAK_REQUEST			0x23	
+#define BREAK_REQUEST			0x23
 #define BREAK_ON			0xffff
 #define BREAK_OFF			0x0000
 
@@ -139,180 +147,45 @@ enum pl2303_type {
 
 struct pl2303_private {
 	spinlock_t lock;
-	struct pl2303_buf *buf;
-	int write_urb_in_use;
 	wait_queue_head_t delta_msr_wait;
 	u8 line_control;
 	u8 line_status;
-	u8 termios_initialized;
 	enum pl2303_type type;
 };
 
-/*
- * pl2303_buf_alloc
- *
- * Allocate a circular buffer and all associated memory.
- */
-static struct pl2303_buf *pl2303_buf_alloc(unsigned int size)
-{
-	struct pl2303_buf *pb;
-
-	if (size == 0)
-		return NULL;
-
-	pb = kmalloc(sizeof(struct pl2303_buf), GFP_KERNEL);
-	if (pb == NULL)
-		return NULL;
-
-	pb->buf_buf = kmalloc(size, GFP_KERNEL);
-	if (pb->buf_buf == NULL) {
-		kfree(pb);
-		return NULL;
-	}
-
-	pb->buf_size = size;
-	pb->buf_get = pb->buf_put = pb->buf_buf;
-
-	return pb;
-}
-
-/*
- * pl2303_buf_free
- *
- * Free the buffer and all associated memory.
- */
-static void pl2303_buf_free(struct pl2303_buf *pb)
-{
-	if (pb) {
-		kfree(pb->buf_buf);
-		kfree(pb);
-	}
-}
-
-/*
- * pl2303_buf_clear
- *
- * Clear out all data in the circular buffer.
- */
-static void pl2303_buf_clear(struct pl2303_buf *pb)
-{
-	if (pb != NULL)
-		pb->buf_get = pb->buf_put;
-		/* equivalent to a get of all data available */
-}
-
-/*
- * pl2303_buf_data_avail
- *
- * Return the number of bytes of data available in the circular
- * buffer.
- */
-static unsigned int pl2303_buf_data_avail(struct pl2303_buf *pb)
-{
-	if (pb == NULL)
-		return 0;
-
-	return ((pb->buf_size + pb->buf_put - pb->buf_get) % pb->buf_size);
-}
-
-/*
- * pl2303_buf_space_avail
- *
- * Return the number of bytes of space available in the circular
- * buffer.
- */
-static unsigned int pl2303_buf_space_avail(struct pl2303_buf *pb)
+static int pl2303_vendor_read(__u16 value, __u16 index,
+		struct usb_serial *serial, unsigned char *buf)
 {
-	if (pb == NULL)
-		return 0;
-
-	return ((pb->buf_size + pb->buf_get - pb->buf_put - 1) % pb->buf_size);
+	int res = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
+			VENDOR_READ_REQUEST, VENDOR_READ_REQUEST_TYPE,
+			value, index, buf, 1, 100);
+	dbg("0x%x:0x%x:0x%x:0x%x  %d - %x", VENDOR_READ_REQUEST_TYPE,
+			VENDOR_READ_REQUEST, value, index, res, buf[0]);
+	return res;
 }
 
-/*
- * pl2303_buf_put
- *
- * Copy data data from a user buffer and put it into the circular buffer.
- * Restrict to the amount of space available.
- *
- * Return the number of bytes copied.
- */
-static unsigned int pl2303_buf_put(struct pl2303_buf *pb, const char *buf,
-				   unsigned int count)
+static int pl2303_vendor_write(__u16 value, __u16 index,
+		struct usb_serial *serial)
 {
-	unsigned int len;
-
-	if (pb == NULL)
-		return 0;
-
-	len  = pl2303_buf_space_avail(pb);
-	if (count > len)
-		count = len;
-
-	if (count == 0)
-		return 0;
-
-	len = pb->buf_buf + pb->buf_size - pb->buf_put;
-	if (count > len) {
-		memcpy(pb->buf_put, buf, len);
-		memcpy(pb->buf_buf, buf+len, count - len);
-		pb->buf_put = pb->buf_buf + count - len;
-	} else {
-		memcpy(pb->buf_put, buf, count);
-		if (count < len)
-			pb->buf_put += count;
-		else /* count == len */
-			pb->buf_put = pb->buf_buf;
-	}
-
-	return count;
-}
-
-/*
- * pl2303_buf_get
- *
- * Get data from the circular buffer and copy to the given buffer.
- * Restrict to the amount of data available.
- *
- * Return the number of bytes copied.
- */
-static unsigned int pl2303_buf_get(struct pl2303_buf *pb, char *buf,
-				   unsigned int count)
-{
-	unsigned int len;
-
-	if (pb == NULL)
-		return 0;
-
-	len = pl2303_buf_data_avail(pb);
-	if (count > len)
-		count = len;
-
-	if (count == 0)
-		return 0;
-
-	len = pb->buf_buf + pb->buf_size - pb->buf_get;
-	if (count > len) {
-		memcpy(buf, pb->buf_get, len);
-		memcpy(buf+len, pb->buf_buf, count - len);
-		pb->buf_get = pb->buf_buf + count - len;
-	} else {
-		memcpy(buf, pb->buf_get, count);
-		if (count < len)
-			pb->buf_get += count;
-		else /* count == len */
-			pb->buf_get = pb->buf_buf;
-	}
-
-	return count;
+	int res = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
+			VENDOR_WRITE_REQUEST, VENDOR_WRITE_REQUEST_TYPE,
+			value, index, NULL, 0, 100);
+	dbg("0x%x:0x%x:0x%x:0x%x  %d", VENDOR_WRITE_REQUEST_TYPE,
+			VENDOR_WRITE_REQUEST, value, index, res);
+	return res;
 }
 
 static int pl2303_startup(struct usb_serial *serial)
 {
 	struct pl2303_private *priv;
 	enum pl2303_type type = type_0;
+	unsigned char *buf;
 	int i;
 
+	buf = kmalloc(10, GFP_KERNEL);
+	if (buf == NULL)
+		return -ENOMEM;
+
 	if (serial->dev->descriptor.bDeviceClass == 0x02)
 		type = type_0;
 	else if (serial->dev->descriptor.bMaxPacketSize0 == 0x40)
@@ -328,21 +201,33 @@ static int pl2303_startup(struct usb_serial *serial)
 		if (!priv)
 			goto cleanup;
 		spin_lock_init(&priv->lock);
-		priv->buf = pl2303_buf_alloc(PL2303_BUF_SIZE);
-		if (priv->buf == NULL) {
-			kfree(priv);
-			goto cleanup;
-		}
 		init_waitqueue_head(&priv->delta_msr_wait);
 		priv->type = type;
 		usb_set_serial_port_data(serial->port[i], priv);
 	}
+
+	pl2303_vendor_read(0x8484, 0, serial, buf);
+	pl2303_vendor_write(0x0404, 0, serial);
+	pl2303_vendor_read(0x8484, 0, serial, buf);
+	pl2303_vendor_read(0x8383, 0, serial, buf);
+	pl2303_vendor_read(0x8484, 0, serial, buf);
+	pl2303_vendor_write(0x0404, 1, serial);
+	pl2303_vendor_read(0x8484, 0, serial, buf);
+	pl2303_vendor_read(0x8383, 0, serial, buf);
+	pl2303_vendor_write(0, 1, serial);
+	pl2303_vendor_write(1, 0, serial);
+	if (type == HX)
+		pl2303_vendor_write(2, 0x44, serial);
+	else
+		pl2303_vendor_write(2, 0x24, serial);
+
+	kfree(buf);
 	return 0;
 
 cleanup:
-	for (--i; i>=0; --i) {
+	kfree(buf);
+	for (--i; i >= 0; --i) {
 		priv = usb_get_serial_port_data(serial->port[i]);
-		pl2303_buf_free(priv->buf);
 		kfree(priv);
 		usb_set_serial_port_data(serial->port[i], NULL);
 	}
@@ -352,111 +237,16 @@ cleanup:
 static int set_control_lines(struct usb_device *dev, u8 value)
 {
 	int retval;
-	
+
 	retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
 				 SET_CONTROL_REQUEST, SET_CONTROL_REQUEST_TYPE,
 				 value, 0, NULL, 0, 100);
-	dbg("%s - value = %d, retval = %d", __FUNCTION__, value, retval);
+	dbg("%s - value = %d, retval = %d", __func__, value, retval);
 	return retval;
 }
 
-static void pl2303_send(struct usb_serial_port *port)
-{
-	int count, result;
-	struct pl2303_private *priv = usb_get_serial_port_data(port);
-	unsigned long flags;
-
-	dbg("%s - port %d", __FUNCTION__, port->number);
-
-	spin_lock_irqsave(&priv->lock, flags);
-
-	if (priv->write_urb_in_use) {
-		spin_unlock_irqrestore(&priv->lock, flags);
-		return;
-	}
-
-	count = pl2303_buf_get(priv->buf, port->write_urb->transfer_buffer,
-			       port->bulk_out_size);
-
-	if (count == 0) {
-		spin_unlock_irqrestore(&priv->lock, flags);
-		return;
-	}
-
-	priv->write_urb_in_use = 1;
-
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	usb_serial_debug_data(debug, &port->dev, __FUNCTION__, count,
-			      port->write_urb->transfer_buffer);
-
-	port->write_urb->transfer_buffer_length = count;
-	port->write_urb->dev = port->serial->dev;
-	result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
-	if (result) {
-		dev_err(&port->dev, "%s - failed submitting write urb,"
-			" error %d\n", __FUNCTION__, result);
-		priv->write_urb_in_use = 0;
-		// TODO: reschedule pl2303_send
-	}
-
-	usb_serial_port_softint(port);
-}
-
-static int pl2303_write(struct usb_serial_port *port, const unsigned char *buf,
-			int count)
-{
-	struct pl2303_private *priv = usb_get_serial_port_data(port);
-	unsigned long flags;
-
-	dbg("%s - port %d, %d bytes", __FUNCTION__, port->number, count);
-
-	if (!count)
-		return count;
-
-	spin_lock_irqsave(&priv->lock, flags);
-	count = pl2303_buf_put(priv->buf, buf, count);
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	pl2303_send(port);
-
-	return count;
-}
-
-static int pl2303_write_room(struct usb_serial_port *port)
-{
-	struct pl2303_private *priv = usb_get_serial_port_data(port);
-	int room = 0;
-	unsigned long flags;
-
-	dbg("%s - port %d", __FUNCTION__, port->number);
-
-	spin_lock_irqsave(&priv->lock, flags);
-	room = pl2303_buf_space_avail(priv->buf);
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	dbg("%s - returns %d", __FUNCTION__, room);
-	return room;
-}
-
-static int pl2303_chars_in_buffer(struct usb_serial_port *port)
-{
-	struct pl2303_private *priv = usb_get_serial_port_data(port);
-	int chars = 0;
-	unsigned long flags;
-
-	dbg("%s - port %d", __FUNCTION__, port->number);
-
-	spin_lock_irqsave(&priv->lock, flags);
-	chars = pl2303_buf_data_avail(priv->buf);
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	dbg("%s - returns %d", __FUNCTION__, chars);
-	return chars;
-}
-
-static void pl2303_set_termios(struct usb_serial_port *port,
-			       struct ktermios *old_termios)
+static void pl2303_set_termios(struct tty_struct *tty,
+		struct usb_serial_port *port, struct ktermios *old_termios)
 {
 	struct usb_serial *serial = port->serial;
 	struct pl2303_private *priv = usb_get_serial_port_data(port);
@@ -466,37 +256,29 @@ static void pl2303_set_termios(struct usb_serial_port *port,
 	int baud;
 	int i;
 	u8 control;
+	const int baud_sup[] = { 75, 150, 300, 600, 1200, 1800, 2400, 3600,
+	                         4800, 7200, 9600, 14400, 19200, 28800, 38400,
+	                         57600, 115200, 230400, 460800, 614400,
+	                         921600, 1228800, 2457600, 3000000, 6000000 };
+	int baud_floor, baud_ceil;
+	int k;
 
-	dbg("%s -  port %d", __FUNCTION__, port->number);
+	dbg("%s -  port %d", __func__, port->number);
 
-	if ((!port->tty) || (!port->tty->termios)) {
-		dbg("%s - no tty structures", __FUNCTION__);
-		return;
-	}
+	/* The PL2303 is reported to lose bytes if you change
+	   serial settings even to the same values as before. Thus
+	   we actually need to filter in this specific case */
 
-	spin_lock_irqsave(&priv->lock, flags);
-	if (!priv->termios_initialized) {
-		*(port->tty->termios) = tty_std_termios;
-		port->tty->termios->c_cflag = B9600 | CS8 | CREAD |
-					      HUPCL | CLOCAL;
-		priv->termios_initialized = 1;
-	}
-	spin_unlock_irqrestore(&priv->lock, flags);
+	if (!tty_termios_hw_change(tty->termios, old_termios))
+		return;
 
-	cflag = port->tty->termios->c_cflag;
-	/* check that they really want us to change something */
-	if (old_termios) {
-		if ((cflag == old_termios->c_cflag) &&
-		    (RELEVANT_IFLAG(port->tty->termios->c_iflag) ==
-		     RELEVANT_IFLAG(old_termios->c_iflag))) {
-			dbg("%s - nothing to change...", __FUNCTION__);
-			return;
-		}
-	}
+	cflag = tty->termios->c_cflag;
 
 	buf = kzalloc(7, GFP_KERNEL);
 	if (!buf) {
-		dev_err(&port->dev, "%s - out of memory.\n", __FUNCTION__);
+		dev_err(&port->dev, "%s - out of memory.\n", __func__);
+		/* Report back no change occurred */
+		*tty->termios = *old_termios;
 		return;
 	}
 
@@ -508,40 +290,56 @@ static void pl2303_set_termios(struct usb_serial_port *port,
 
 	if (cflag & CSIZE) {
 		switch (cflag & CSIZE) {
-			case CS5:	buf[6] = 5;	break;
-			case CS6:	buf[6] = 6;	break;
-			case CS7:	buf[6] = 7;	break;
-			default:
-			case CS8:	buf[6] = 8;	break;
-		}
-		dbg("%s - data bits = %d", __FUNCTION__, buf[6]);
-	}
-
-	baud = 0;
-	switch (cflag & CBAUD) {
-		case B0:	baud = 0;	break;
-		case B75:	baud = 75;	break;
-		case B150:	baud = 150;	break;
-		case B300:	baud = 300;	break;
-		case B600:	baud = 600;	break;
-		case B1200:	baud = 1200;	break;
-		case B1800:	baud = 1800;	break;
-		case B2400:	baud = 2400;	break;
-		case B4800:	baud = 4800;	break;
-		case B9600:	baud = 9600;	break;
-		case B19200:	baud = 19200;	break;
-		case B38400:	baud = 38400;	break;
-		case B57600:	baud = 57600;	break;
-		case B115200:	baud = 115200;	break;
-		case B230400:	baud = 230400;	break;
-		case B460800:	baud = 460800;	break;
+		case CS5:
+			buf[6] = 5;
+			break;
+		case CS6:
+			buf[6] = 6;
+			break;
+		case CS7:
+			buf[6] = 7;
+			break;
 		default:
-			dev_err(&port->dev, "pl2303 driver does not support"
-				" the baudrate requested (fix it)\n");
+		case CS8:
+			buf[6] = 8;
 			break;
+		}
+		dbg("%s - data bits = %d", __func__, buf[6]);
 	}
-	dbg("%s - baud = %d", __FUNCTION__, baud);
+
+	/* For reference buf[0]:buf[3] baud rate value */
+	/* NOTE: Only the values defined in baud_sup are supported !
+	 *       => if unsupported values are set, the PL2303 seems to use
+	 *          9600 baud (at least my PL2303X always does)
+	 */
+	baud = tty_get_baud_rate(tty);
+	dbg("%s - baud requested = %d", __func__, baud);
 	if (baud) {
+		/* Set baudrate to nearest supported value */
+		for (k=0; k<ARRAY_SIZE(baud_sup); k++) {
+			if (baud_sup[k] / baud) {
+				baud_ceil = baud_sup[k];
+				if (k==0) {
+					baud = baud_ceil;
+				} else {
+					baud_floor = baud_sup[k-1];
+					if ((baud_ceil % baud)
+					    > (baud % baud_floor))
+						baud = baud_floor;
+					else
+						baud = baud_ceil;
+				}
+				break;
+			}
+		}
+		if (baud > 1228800) {
+			/* type_0, type_1 only support up to 1228800 baud */
+			if (priv->type != HX)
+				baud = 1228800;
+			else if (baud > 6000000)
+				baud = 6000000;
+		}
+		dbg("%s - baud set = %d", __func__, baud);
 		buf[0] = baud & 0xff;
 		buf[1] = (baud >> 8) & 0xff;
 		buf[2] = (baud >> 16) & 0xff;
@@ -552,11 +350,19 @@ static void pl2303_set_termios(struct usb_serial_port *port,
 	/* For reference buf[4]=1 is 1.5 stop bits */
 	/* For reference buf[4]=2 is 2 stop bits */
 	if (cflag & CSTOPB) {
-		buf[4] = 2;
-		dbg("%s - stop bits = 2", __FUNCTION__);
+		/* NOTE: Comply with "real" UARTs / RS232:
+		 *       use 1.5 instead of 2 stop bits with 5 data bits
+		 */
+		if ((cflag & CSIZE) == CS5) {
+			buf[4] = 1;
+			dbg("%s - stop bits = 1.5", __func__);
+		} else {
+			buf[4] = 2;
+			dbg("%s - stop bits = 2", __func__);
+		}
 	} else {
 		buf[4] = 0;
-		dbg("%s - stop bits = 1", __FUNCTION__);
+		dbg("%s - stop bits = 1", __func__);
 	}
 
 	if (cflag & PARENB) {
@@ -566,15 +372,25 @@ static void pl2303_set_termios(struct usb_serial_port *port,
 		/* For reference buf[5]=3 is mark parity */
 		/* For reference buf[5]=4 is space parity */
 		if (cflag & PARODD) {
-			buf[5] = 1;
-			dbg("%s - parity = odd", __FUNCTION__);
+			if (cflag & CMSPAR) {
+				buf[5] = 3;
+				dbg("%s - parity = mark", __func__);
+			} else {
+				buf[5] = 1;
+				dbg("%s - parity = odd", __func__);
+			}
 		} else {
-			buf[5] = 2;
-			dbg("%s - parity = even", __FUNCTION__);
+			if (cflag & CMSPAR) {
+				buf[5] = 4;
+				dbg("%s - parity = space", __func__);
+			} else {
+				buf[5] = 2;
+				dbg("%s - parity = even", __func__);
+			}
 		}
 	} else {
 		buf[5] = 0;
-		dbg("%s - parity = none", __FUNCTION__);
+		dbg("%s - parity = none", __func__);
 	}
 
 	i = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
@@ -606,177 +422,102 @@ static void pl2303_set_termios(struct usb_serial_port *port,
 	     buf[0], buf[1], buf[2], buf[3], buf[4], buf[5], buf[6]);
 
 	if (cflag & CRTSCTS) {
-		__u16 index;
 		if (priv->type == HX)
-			index = 0x61;
+			pl2303_vendor_write(0x0, 0x61, serial);
 		else
-			index = 0x41;
-		i = usb_control_msg(serial->dev,
-				    usb_sndctrlpipe(serial->dev, 0),
-				    VENDOR_WRITE_REQUEST,
-				    VENDOR_WRITE_REQUEST_TYPE,
-				    0x0, index, NULL, 0, 100);
-		dbg("0x40:0x1:0x0:0x%x  %d", index, i);
+			pl2303_vendor_write(0x0, 0x41, serial);
 	} else {
-		i = usb_control_msg(serial->dev,
-				    usb_sndctrlpipe(serial->dev, 0),
-				    VENDOR_WRITE_REQUEST,
-				    VENDOR_WRITE_REQUEST_TYPE,
-				    0x0, 0x0, NULL, 0, 100);
-		dbg ("0x40:0x1:0x0:0x0  %d", i);
+		pl2303_vendor_write(0x0, 0x0, serial);
 	}
 
+	/* Save resulting baud rate */
+	if (baud)
+		tty_encode_baud_rate(tty, baud, baud);
+
 	kfree(buf);
 }
 
-static void pl2303_close(struct usb_serial_port *port, struct file *filp)
+static void pl2303_dtr_rts(struct usb_serial_port *port, int on)
 {
 	struct pl2303_private *priv = usb_get_serial_port_data(port);
 	unsigned long flags;
-	unsigned int c_cflag;
-	int bps;
-	long timeout;
-	wait_queue_t wait;
-
-	dbg("%s - port %d", __FUNCTION__, port->number);
+	u8 control;
 
-	/* wait for data to drain from the buffer */
 	spin_lock_irqsave(&priv->lock, flags);
-	timeout = PL2303_CLOSING_WAIT;
-	init_waitqueue_entry(&wait, current);
-	add_wait_queue(&port->tty->write_wait, &wait);
-	for (;;) {
-		set_current_state(TASK_INTERRUPTIBLE);
-		if (pl2303_buf_data_avail(priv->buf) == 0 ||
-		    timeout == 0 || signal_pending(current) ||
-		    !usb_get_intfdata(port->serial->interface))	/* disconnect */
-			break;
-		spin_unlock_irqrestore(&priv->lock, flags);
-		timeout = schedule_timeout(timeout);
-		spin_lock_irqsave(&priv->lock, flags);
-	}
-	set_current_state(TASK_RUNNING);
-	remove_wait_queue(&port->tty->write_wait, &wait);
-	/* clear out any remaining data in the buffer */
-	pl2303_buf_clear(priv->buf);
+	/* Change DTR and RTS */
+	if (on)
+		priv->line_control |= (CONTROL_DTR | CONTROL_RTS);
+	else
+		priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS);
+	control = priv->line_control;
 	spin_unlock_irqrestore(&priv->lock, flags);
+	set_control_lines(port->serial->dev, control);
+}
 
-	/* wait for characters to drain from the device */
-	/* (this is long enough for the entire 256 byte */
-	/* pl2303 hardware buffer to drain with no flow */
-	/* control for data rates of 1200 bps or more, */
-	/* for lower rates we should really know how much */
-	/* data is in the buffer to compute a delay */
-	/* that is not unnecessarily long) */
-	bps = tty_get_baud_rate(port->tty);
-	if (bps > 1200)
-		timeout = max((HZ*2560)/bps,HZ/10);
-	else
-		timeout = 2*HZ;
-	schedule_timeout_interruptible(timeout);
+static void pl2303_close(struct usb_serial_port *port)
+{
+	unsigned long flags;
+
+	dbg("%s - port %d", __func__, port->number);
+
+	spin_lock_irqsave(&port->lock, flags);
+	/* clear out any remaining data in the buffer */
+	kfifo_reset_out(&port->write_fifo);
+	spin_unlock_irqrestore(&port->lock, flags);
 
 	/* shutdown our urbs */
-	dbg("%s - shutting down urbs", __FUNCTION__);
+	dbg("%s - shutting down urbs", __func__);
 	usb_kill_urb(port->write_urb);
 	usb_kill_urb(port->read_urb);
 	usb_kill_urb(port->interrupt_in_urb);
 
-	if (port->tty) {
-		c_cflag = port->tty->termios->c_cflag;
-		if (c_cflag & HUPCL) {
-			/* drop DTR and RTS */
-			spin_lock_irqsave(&priv->lock, flags);
-			priv->line_control = 0;
-			spin_unlock_irqrestore(&priv->lock, flags);
-			set_control_lines(port->serial->dev, 0);
-		}
-	}
 }
 
-static int pl2303_open(struct usb_serial_port *port, struct file *filp)
+static int pl2303_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct ktermios tmp_termios;
 	struct usb_serial *serial = port->serial;
 	struct pl2303_private *priv = usb_get_serial_port_data(port);
-	unsigned char *buf;
 	int result;
 
-	dbg("%s -  port %d", __FUNCTION__, port->number);
+	dbg("%s -  port %d", __func__, port->number);
 
 	if (priv->type != HX) {
 		usb_clear_halt(serial->dev, port->write_urb->pipe);
 		usb_clear_halt(serial->dev, port->read_urb->pipe);
-	}
-
-	buf = kmalloc(10, GFP_KERNEL);
-	if (buf==NULL)
-		return -ENOMEM;
-
-#define FISH(a,b,c,d)								\
-	result=usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev,0),	\
-			       b, a, c, d, buf, 1, 100);			\
-	dbg("0x%x:0x%x:0x%x:0x%x  %d - %x",a,b,c,d,result,buf[0]);
-
-#define SOUP(a,b,c,d)								\
-	result=usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev,0),	\
-			       b, a, c, d, NULL, 0, 100);			\
-	dbg("0x%x:0x%x:0x%x:0x%x  %d",a,b,c,d,result);
-
-	FISH (VENDOR_READ_REQUEST_TYPE, VENDOR_READ_REQUEST, 0x8484, 0);
-	SOUP (VENDOR_WRITE_REQUEST_TYPE, VENDOR_WRITE_REQUEST, 0x0404, 0);
-	FISH (VENDOR_READ_REQUEST_TYPE, VENDOR_READ_REQUEST, 0x8484, 0);
-	FISH (VENDOR_READ_REQUEST_TYPE, VENDOR_READ_REQUEST, 0x8383, 0);
-	FISH (VENDOR_READ_REQUEST_TYPE, VENDOR_READ_REQUEST, 0x8484, 0);
-	SOUP (VENDOR_WRITE_REQUEST_TYPE, VENDOR_WRITE_REQUEST, 0x0404, 1);
-	FISH (VENDOR_READ_REQUEST_TYPE, VENDOR_READ_REQUEST, 0x8484, 0);
-	FISH (VENDOR_READ_REQUEST_TYPE, VENDOR_READ_REQUEST, 0x8383, 0);
-	SOUP (VENDOR_WRITE_REQUEST_TYPE, VENDOR_WRITE_REQUEST, 0, 1);
-	SOUP (VENDOR_WRITE_REQUEST_TYPE, VENDOR_WRITE_REQUEST, 1, 0);
-
-	if (priv->type == HX) {
-		/* HX chip */
-		SOUP (VENDOR_WRITE_REQUEST_TYPE, VENDOR_WRITE_REQUEST, 2, 0x44);
-		/* reset upstream data pipes */
-          	SOUP (VENDOR_WRITE_REQUEST_TYPE, VENDOR_WRITE_REQUEST, 8, 0);
-        	SOUP (VENDOR_WRITE_REQUEST_TYPE, VENDOR_WRITE_REQUEST, 9, 0);
 	} else {
-		SOUP (VENDOR_WRITE_REQUEST_TYPE, VENDOR_WRITE_REQUEST, 2, 0x24);
+		/* reset upstream data pipes */
+		pl2303_vendor_write(8, 0, serial);
+		pl2303_vendor_write(9, 0, serial);
 	}
 
-	kfree(buf);
-
 	/* Setup termios */
-	if (port->tty) {
-		pl2303_set_termios(port, &tmp_termios);
-	}
+	if (tty)
+		pl2303_set_termios(tty, port, &tmp_termios);
 
-	//FIXME: need to assert RTS and DTR if CRTSCTS off
-
-	dbg("%s - submitting read urb", __FUNCTION__);
-	port->read_urb->dev = serial->dev;
-	result = usb_submit_urb(port->read_urb, GFP_KERNEL);
+	dbg("%s - submitting read urb", __func__);
+	result = usb_serial_generic_submit_read_urb(port, GFP_KERNEL);
 	if (result) {
-		dev_err(&port->dev, "%s - failed submitting read urb,"
-			" error %d\n", __FUNCTION__, result);
-		pl2303_close(port, NULL);
+		pl2303_close(port);
 		return -EPROTO;
 	}
 
-	dbg("%s - submitting interrupt urb", __FUNCTION__);
-	port->interrupt_in_urb->dev = serial->dev;
+	dbg("%s - submitting interrupt urb", __func__);
 	result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
 	if (result) {
 		dev_err(&port->dev, "%s - failed submitting interrupt urb,"
-			" error %d\n", __FUNCTION__, result);
-		pl2303_close(port, NULL);
+			" error %d\n", __func__, result);
+		pl2303_close(port);
 		return -EPROTO;
 	}
+	port->port.drain_delay = 256;
 	return 0;
 }
 
-static int pl2303_tiocmset(struct usb_serial_port *port, struct file *file,
+static int pl2303_tiocmset(struct tty_struct *tty, struct file *file,
 			   unsigned int set, unsigned int clear)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct pl2303_private *priv = usb_get_serial_port_data(port);
 	unsigned long flags;
 	u8 control;
@@ -799,15 +540,16 @@ static int pl2303_tiocmset(struct usb_serial_port *port, struct file *file,
 	return set_control_lines(port->serial->dev, control);
 }
 
-static int pl2303_tiocmget(struct usb_serial_port *port, struct file *file)
+static int pl2303_tiocmget(struct tty_struct *tty, struct file *file)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct pl2303_private *priv = usb_get_serial_port_data(port);
 	unsigned long flags;
 	unsigned int mcr;
 	unsigned int status;
 	unsigned int result;
 
-	dbg("%s (%d)", __FUNCTION__, port->number);
+	dbg("%s (%d)", __func__, port->number);
 
 	if (!usb_get_intfdata(port->serial->interface))
 		return -ENODEV;
@@ -824,11 +566,19 @@ static int pl2303_tiocmget(struct usb_serial_port *port, struct file *file)
 		  | ((status & UART_RING)	? TIOCM_RI  : 0)
 		  | ((status & UART_DCD)	? TIOCM_CD  : 0);
 
-	dbg("%s - result = %x", __FUNCTION__, result);
+	dbg("%s - result = %x", __func__, result);
 
 	return result;
 }
 
+static int pl2303_carrier_raised(struct usb_serial_port *port)
+{
+	struct pl2303_private *priv = usb_get_serial_port_data(port);
+	if (priv->line_status & UART_DCD)
+		return 1;
+	return 0;
+}
+
 static int wait_modem_info(struct usb_serial_port *port, unsigned int arg)
 {
 	struct pl2303_private *priv = usb_get_serial_port_data(port);
@@ -851,12 +601,12 @@ static int wait_modem_info(struct usb_serial_port *port, unsigned int arg)
 		status = priv->line_status;
 		spin_unlock_irqrestore(&priv->lock, flags);
 
-		changed=prevstatus^status;
+		changed = prevstatus ^ status;
 
 		if (((arg & TIOCM_RNG) && (changed & UART_RING)) ||
 		    ((arg & TIOCM_DSR) && (changed & UART_DSR)) ||
 		    ((arg & TIOCM_CD)  && (changed & UART_DCD)) ||
-		    ((arg & TIOCM_CTS) && (changed & UART_CTS)) ) {
+		    ((arg & TIOCM_CTS) && (changed & UART_CTS))) {
 			return 0;
 		}
 		prevstatus = status;
@@ -865,59 +615,69 @@ static int wait_modem_info(struct usb_serial_port *port, unsigned int arg)
 	return 0;
 }
 
-static int pl2303_ioctl(struct usb_serial_port *port, struct file *file,
+static int pl2303_ioctl(struct tty_struct *tty, struct file *file,
 			unsigned int cmd, unsigned long arg)
 {
-	dbg("%s (%d) cmd = 0x%04x", __FUNCTION__, port->number, cmd);
+	struct serial_struct ser;
+	struct usb_serial_port *port = tty->driver_data;
+	dbg("%s (%d) cmd = 0x%04x", __func__, port->number, cmd);
 
 	switch (cmd) {
-		case TIOCMIWAIT:
-			dbg("%s (%d) TIOCMIWAIT", __FUNCTION__,  port->number);
-			return wait_modem_info(port, arg);
+	case TIOCGSERIAL:
+		memset(&ser, 0, sizeof ser);
+		ser.type = PORT_16654;
+		ser.line = port->serial->minor;
+		ser.port = port->number;
+		ser.baud_base = 460800;
 
-		default:
-			dbg("%s not supported = 0x%04x", __FUNCTION__, cmd);
-			break;
-	}
+		if (copy_to_user((void __user *)arg, &ser, sizeof ser))
+			return -EFAULT;
 
+		return 0;
+
+	case TIOCMIWAIT:
+		dbg("%s (%d) TIOCMIWAIT", __func__,  port->number);
+		return wait_modem_info(port, arg);
+	default:
+		dbg("%s not supported = 0x%04x", __func__, cmd);
+		break;
+	}
 	return -ENOIOCTLCMD;
 }
 
-static void pl2303_break_ctl(struct usb_serial_port *port, int break_state)
+static void pl2303_break_ctl(struct tty_struct *tty, int break_state)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct usb_serial *serial = port->serial;
 	u16 state;
 	int result;
 
-	dbg("%s - port %d", __FUNCTION__, port->number);
+	dbg("%s - port %d", __func__, port->number);
 
 	if (break_state == 0)
 		state = BREAK_OFF;
 	else
 		state = BREAK_ON;
-	dbg("%s - turning break %s", __FUNCTION__, state==BREAK_OFF ? "off" : "on");
+	dbg("%s - turning break %s", __func__,
+			state == BREAK_OFF ? "off" : "on");
 
 	result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
 				 BREAK_REQUEST, BREAK_REQUEST_TYPE, state,
 				 0, NULL, 0, 100);
 	if (result)
-		dbg("%s - error sending break = %d", __FUNCTION__, result);
+		dbg("%s - error sending break = %d", __func__, result);
 }
 
-static void pl2303_shutdown(struct usb_serial *serial)
+static void pl2303_release(struct usb_serial *serial)
 {
 	int i;
 	struct pl2303_private *priv;
 
-	dbg("%s", __FUNCTION__);
+	dbg("%s", __func__);
 
 	for (i = 0; i < serial->num_ports; ++i) {
 		priv = usb_get_serial_port_data(serial->port[i]);
-		if (priv) {
-			pl2303_buf_free(priv->buf);
-			kfree(priv);
-			usb_set_serial_port_data(serial->port[i], NULL);
-		}
+		kfree(priv);
 	}
 }
 
@@ -949,23 +709,26 @@ static void pl2303_update_line_status(struct usb_serial_port *port,
 	if (actual_length < length)
 		return;
 
-        /* Save off the uart status for others to look at */
+	/* Save off the uart status for others to look at */
 	spin_lock_irqsave(&priv->lock, flags);
 	priv->line_status = data[status_idx];
 	spin_unlock_irqrestore(&priv->lock, flags);
+	if (priv->line_status & UART_BREAK_ERROR)
+		usb_serial_handle_break(port);
 	wake_up_interruptible(&priv->delta_msr_wait);
 }
 
 static void pl2303_read_int_callback(struct urb *urb)
 {
-	struct usb_serial_port *port = (struct usb_serial_port *) urb->context;
+	struct usb_serial_port *port =  urb->context;
 	unsigned char *data = urb->transfer_buffer;
 	unsigned int actual_length = urb->actual_length;
-	int status;
+	int status = urb->status;
+	int retval;
 
-	dbg("%s (%d)", __FUNCTION__, port->number);
+	dbg("%s (%d)", __func__, port->number);
 
-	switch (urb->status) {
+	switch (status) {
 	case 0:
 		/* success */
 		break;
@@ -973,150 +736,77 @@ static void pl2303_read_int_callback(struct urb *urb)
 	case -ENOENT:
 	case -ESHUTDOWN:
 		/* this urb is terminated, clean up */
-		dbg("%s - urb shutting down with status: %d", __FUNCTION__,
-		    urb->status);
+		dbg("%s - urb shutting down with status: %d", __func__,
+		    status);
 		return;
 	default:
-		dbg("%s - nonzero urb status received: %d", __FUNCTION__,
-		    urb->status);
+		dbg("%s - nonzero urb status received: %d", __func__,
+		    status);
 		goto exit;
 	}
 
-	usb_serial_debug_data(debug, &port->dev, __FUNCTION__,
+	usb_serial_debug_data(debug, &port->dev, __func__,
 			      urb->actual_length, urb->transfer_buffer);
 
 	pl2303_update_line_status(port, data, actual_length);
 
 exit:
-	status = usb_submit_urb(urb, GFP_ATOMIC);
-	if (status)
+	retval = usb_submit_urb(urb, GFP_ATOMIC);
+	if (retval)
 		dev_err(&urb->dev->dev,
 			"%s - usb_submit_urb failed with result %d\n",
-			__FUNCTION__, status);
+			__func__, retval);
 }
 
-static void pl2303_read_bulk_callback(struct urb *urb)
+static void pl2303_process_read_urb(struct urb *urb)
 {
-	struct usb_serial_port *port = (struct usb_serial_port *) urb->context;
+	struct usb_serial_port *port = urb->context;
 	struct pl2303_private *priv = usb_get_serial_port_data(port);
 	struct tty_struct *tty;
 	unsigned char *data = urb->transfer_buffer;
+	char tty_flag = TTY_NORMAL;
 	unsigned long flags;
+	u8 line_status;
 	int i;
-	int result;
-	u8 status;
-	char tty_flag;
-
-	dbg("%s - port %d", __FUNCTION__, port->number);
-
-	if (urb->status) {
-		dbg("%s - urb->status = %d", __FUNCTION__, urb->status);
-		if (!port->open_count) {
-			dbg("%s - port is closed, exiting.", __FUNCTION__);
-			return;
-		}
-		if (urb->status == -EPROTO) {
-			/* PL2303 mysteriously fails with -EPROTO reschedule
-			 * the read */
-			dbg("%s - caught -EPROTO, resubmitting the urb",
-			    __FUNCTION__);
-			urb->status = 0;
-			urb->dev = port->serial->dev;
-			result = usb_submit_urb(urb, GFP_ATOMIC);
-			if (result)
-				dev_err(&urb->dev->dev, "%s - failed"
-					" resubmitting read urb, error %d\n",
-					__FUNCTION__, result);
-			return;
-		}
-		dbg("%s - unable to handle the error, exiting.", __FUNCTION__);
-		return;
-	}
-
-	usb_serial_debug_data(debug, &port->dev, __FUNCTION__,
-			      urb->actual_length, data);
-
-	/* get tty_flag from status */
-	tty_flag = TTY_NORMAL;
 
+	/* update line status */
 	spin_lock_irqsave(&priv->lock, flags);
-	status = priv->line_status;
+	line_status = priv->line_status;
 	priv->line_status &= ~UART_STATE_TRANSIENT_MASK;
 	spin_unlock_irqrestore(&priv->lock, flags);
 	wake_up_interruptible(&priv->delta_msr_wait);
 
+	if (!urb->actual_length)
+		return;
+
+	tty = tty_port_tty_get(&port->port);
+	if (!tty)
+		return;
+
 	/* break takes precedence over parity, */
 	/* which takes precedence over framing errors */
-	if (status & UART_BREAK_ERROR )
+	if (line_status & UART_BREAK_ERROR)
 		tty_flag = TTY_BREAK;
-	else if (status & UART_PARITY_ERROR)
+	else if (line_status & UART_PARITY_ERROR)
 		tty_flag = TTY_PARITY;
-	else if (status & UART_FRAME_ERROR)
+	else if (line_status & UART_FRAME_ERROR)
 		tty_flag = TTY_FRAME;
-	dbg("%s - tty_flag = %d", __FUNCTION__, tty_flag);
-
-	tty = port->tty;
-	if (tty && urb->actual_length) {
-		tty_buffer_request_room(tty, urb->actual_length + 1);
-		/* overrun is special, not associated with a char */
-		if (status & UART_OVERRUN_ERROR)
-			tty_insert_flip_char(tty, 0, TTY_OVERRUN);
-		for (i = 0; i < urb->actual_length; ++i)
-			tty_insert_flip_char(tty, data[i], tty_flag);
-		tty_flip_buffer_push(tty);
-	}
-
-	/* Schedule the next read _if_ we are still open */
-	if (port->open_count) {
-		urb->dev = port->serial->dev;
-		result = usb_submit_urb(urb, GFP_ATOMIC);
-		if (result)
-			dev_err(&urb->dev->dev, "%s - failed resubmitting"
-				" read urb, error %d\n", __FUNCTION__, result);
-	}
-
-	return;
-}
-
-static void pl2303_write_bulk_callback(struct urb *urb)
-{
-	struct usb_serial_port *port = (struct usb_serial_port *) urb->context;
-	struct pl2303_private *priv = usb_get_serial_port_data(port);
-	int result;
+	dbg("%s - tty_flag = %d", __func__, tty_flag);
 
-	dbg("%s - port %d", __FUNCTION__, port->number);
+	/* overrun is special, not associated with a char */
+	if (line_status & UART_OVERRUN_ERROR)
+		tty_insert_flip_char(tty, 0, TTY_OVERRUN);
 
-	switch (urb->status) {
-	case 0:
-		/* success */
-		break;
-	case -ECONNRESET:
-	case -ENOENT:
-	case -ESHUTDOWN:
-		/* this urb is terminated, clean up */
-		dbg("%s - urb shutting down with status: %d", __FUNCTION__,
-		    urb->status);
-		priv->write_urb_in_use = 0;
-		return;
-	default:
-		/* error in the urb, so we have to resubmit it */
-		dbg("%s - Overflow in write", __FUNCTION__);
-		dbg("%s - nonzero write bulk status received: %d", __FUNCTION__,
-		    urb->status);
-		port->write_urb->transfer_buffer_length = 1;
-		port->write_urb->dev = port->serial->dev;
-		result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
-		if (result)
-			dev_err(&urb->dev->dev, "%s - failed resubmitting write"
-				" urb, error %d\n", __FUNCTION__, result);
-		else
-			return;
+	if (tty_flag == TTY_NORMAL && !(port->port.console && port->sysrq))
+		tty_insert_flip_string(tty, data, urb->actual_length);
+	else {
+		for (i = 0; i < urb->actual_length; ++i)
+			if (!usb_serial_handle_sysrq_char(tty, port, data[i]))
+				tty_insert_flip_char(tty, data[i], tty_flag);
 	}
 
-	priv->write_urb_in_use = 0;
-
-	/* send any buffered data */
-	pl2303_send(port);
+	tty_flip_buffer_push(tty);
+	tty_kref_put(tty);
 }
 
 /* All of the device info needed for the PL2303 SIO serial converter */
@@ -1127,25 +817,22 @@ static struct usb_serial_driver pl2303_device = {
 	},
 	.id_table =		id_table,
 	.usb_driver = 		&pl2303_driver,
-	.num_interrupt_in =	NUM_DONT_CARE,
-	.num_bulk_in =		1,
-	.num_bulk_out =		1,
 	.num_ports =		1,
+	.bulk_in_size =		256,
+	.bulk_out_size =	256,
 	.open =			pl2303_open,
 	.close =		pl2303_close,
-	.write =		pl2303_write,
+	.dtr_rts = 		pl2303_dtr_rts,
+	.carrier_raised =	pl2303_carrier_raised,
 	.ioctl =		pl2303_ioctl,
 	.break_ctl =		pl2303_break_ctl,
 	.set_termios =		pl2303_set_termios,
 	.tiocmget =		pl2303_tiocmget,
 	.tiocmset =		pl2303_tiocmset,
-	.read_bulk_callback =	pl2303_read_bulk_callback,
+	.process_read_urb =	pl2303_process_read_urb,
 	.read_int_callback =	pl2303_read_int_callback,
-	.write_bulk_callback =	pl2303_write_bulk_callback,
-	.write_room =		pl2303_write_room,
-	.chars_in_buffer =	pl2303_chars_in_buffer,
 	.attach =		pl2303_startup,
-	.shutdown =		pl2303_shutdown,
+	.release =		pl2303_release,
 };
 
 static int __init pl2303_init(void)
@@ -1158,7 +845,7 @@ static int __init pl2303_init(void)
 	retval = usb_register(&pl2303_driver);
 	if (retval)
 		goto failed_usb_register;
-	info(DRIVER_DESC);
+	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_DESC "\n");
 	return 0;
 failed_usb_register:
 	usb_serial_deregister(&pl2303_device);