X-Git-Url: http://ftp.safe.ca/?a=blobdiff_plain;f=drivers%2Fusb%2Fserial%2Fftdi_sio.h;h=daaf63db0b500171bdea0ceaa740f880c697eb24;hb=b0d659002168146ec6b03d1ef062d8dcf05ff510;hp=e1eb742abcd5d081f467b01263a5bf45f26f54b3;hpb=546d7eec389a3df3173b3131d92829c14e614601;p=safe%2Fjmp%2Flinux-2.6 diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h index e1eb742..daaf63d 100644 --- a/drivers/usb/serial/ftdi_sio.h +++ b/drivers/usb/serial/ftdi_sio.h @@ -1,20 +1,20 @@ /* - * Definitions for the FTDI USB Single Port Serial Converter - - * known as FTDI_SIO (Serial Input/Output application of the chipset) + * Definitions for the FTDI USB Single Port Serial Converter - + * known as FTDI_SIO (Serial Input/Output application of the chipset) * * The example I have is known as the USC-1000 which is available from * http://www.dse.co.nz - cat no XH4214 It looks similar to this: * http://www.dansdata.com/usbser.htm but I can't be sure There are other * USC-1000s which don't look like my device though so beware! * - * The device is based on the FTDI FT8U100AX chip. It has a DB25 on one side, + * The device is based on the FTDI FT8U100AX chip. It has a DB25 on one side, * USB on the other. * * Thanx to FTDI (http://www.ftdi.co.uk) for so kindly providing details * of the protocol required to talk to the device and ongoing assistence * during development. * - * Bill Ryder - bryder@sgi.com formerly of Silicon Graphics, Inc.- wrote the + * Bill Ryder - bryder@sgi.com formerly of Silicon Graphics, Inc.- wrote the * FTDI_SIO implementation. * * Philipp Gühring - pg@futureware.at - added the Device ID of the USB relais @@ -40,6 +40,20 @@ /* AlphaMicro Components AMC-232USB01 device */ #define FTDI_AMC232_PID 0xFF00 /* Product Id */ +/* www.candapter.com Ewert Energy Systems CANdapter device */ +#define FTDI_CANDAPTER_PID 0x9F80 /* Product Id */ + +/* SCS HF Radio Modems PID's (http://www.scs-ptc.com) */ +/* the VID is the standard ftdi vid (FTDI_VID) */ +#define FTDI_SCS_DEVICE_0_PID 0xD010 /* SCS PTC-IIusb */ +#define FTDI_SCS_DEVICE_1_PID 0xD011 /* SCS Tracker / DSP TNC */ +#define FTDI_SCS_DEVICE_2_PID 0xD012 +#define FTDI_SCS_DEVICE_3_PID 0xD013 +#define FTDI_SCS_DEVICE_4_PID 0xD014 +#define FTDI_SCS_DEVICE_5_PID 0xD015 +#define FTDI_SCS_DEVICE_6_PID 0xD016 +#define FTDI_SCS_DEVICE_7_PID 0xD017 + /* ACT Solutions HomePro ZWave interface (http://www.act-solutions.com/HomePro.htm) */ #define FTDI_ACTZWAVE_PID 0xF2D0 @@ -64,6 +78,9 @@ /* OpenDCC (www.opendcc.de) product id */ #define FTDI_OPENDCC_PID 0xBFD8 +/* Sprog II (Andrew Crosland's SprogII DCC interface) */ +#define FTDI_SPROG_II 0xF0C8 + /* www.crystalfontz.com devices - thanx for providing free devices for evaluation ! */ /* they use the ftdi chipset for the USB interface and the vendor id is the same */ #define FTDI_XF_632_PID 0xFC08 /* 632: 16x2 Character Display */ @@ -103,11 +120,268 @@ #define FTDI_OOCDLINK_PID 0xbaf8 /* Amontec JTAGkey */ /* - * The following are the values for the Matrix Orbital VK204-25-USB - * display, which use the FT232RL. - */ -#define MTXORB_VK_VID 0x1b3d -#define MTXORB_VK_PID 0x0158 + * The following are the values for the Matrix Orbital FTDI Range + * Anything in this range will use an FT232RL. + */ +#define MTXORB_VID 0x1B3D +#define MTXORB_FTDI_RANGE_0100_PID 0x0100 +#define MTXORB_FTDI_RANGE_0101_PID 0x0101 +#define MTXORB_FTDI_RANGE_0102_PID 0x0102 +#define MTXORB_FTDI_RANGE_0103_PID 0x0103 +#define MTXORB_FTDI_RANGE_0104_PID 0x0104 +#define MTXORB_FTDI_RANGE_0105_PID 0x0105 +#define MTXORB_FTDI_RANGE_0106_PID 0x0106 +#define MTXORB_FTDI_RANGE_0107_PID 0x0107 +#define MTXORB_FTDI_RANGE_0108_PID 0x0108 +#define MTXORB_FTDI_RANGE_0109_PID 0x0109 +#define MTXORB_FTDI_RANGE_010A_PID 0x010A +#define MTXORB_FTDI_RANGE_010B_PID 0x010B +#define MTXORB_FTDI_RANGE_010C_PID 0x010C +#define MTXORB_FTDI_RANGE_010D_PID 0x010D +#define MTXORB_FTDI_RANGE_010E_PID 0x010E +#define MTXORB_FTDI_RANGE_010F_PID 0x010F +#define MTXORB_FTDI_RANGE_0110_PID 0x0110 +#define MTXORB_FTDI_RANGE_0111_PID 0x0111 +#define MTXORB_FTDI_RANGE_0112_PID 0x0112 +#define MTXORB_FTDI_RANGE_0113_PID 0x0113 +#define MTXORB_FTDI_RANGE_0114_PID 0x0114 +#define MTXORB_FTDI_RANGE_0115_PID 0x0115 +#define MTXORB_FTDI_RANGE_0116_PID 0x0116 +#define MTXORB_FTDI_RANGE_0117_PID 0x0117 +#define MTXORB_FTDI_RANGE_0118_PID 0x0118 +#define MTXORB_FTDI_RANGE_0119_PID 0x0119 +#define MTXORB_FTDI_RANGE_011A_PID 0x011A +#define MTXORB_FTDI_RANGE_011B_PID 0x011B +#define MTXORB_FTDI_RANGE_011C_PID 0x011C +#define MTXORB_FTDI_RANGE_011D_PID 0x011D +#define MTXORB_FTDI_RANGE_011E_PID 0x011E +#define MTXORB_FTDI_RANGE_011F_PID 0x011F +#define MTXORB_FTDI_RANGE_0120_PID 0x0120 +#define MTXORB_FTDI_RANGE_0121_PID 0x0121 +#define MTXORB_FTDI_RANGE_0122_PID 0x0122 +#define MTXORB_FTDI_RANGE_0123_PID 0x0123 +#define MTXORB_FTDI_RANGE_0124_PID 0x0124 +#define MTXORB_FTDI_RANGE_0125_PID 0x0125 +#define MTXORB_FTDI_RANGE_0126_PID 0x0126 +#define MTXORB_FTDI_RANGE_0127_PID 0x0127 +#define MTXORB_FTDI_RANGE_0128_PID 0x0128 +#define MTXORB_FTDI_RANGE_0129_PID 0x0129 +#define MTXORB_FTDI_RANGE_012A_PID 0x012A +#define MTXORB_FTDI_RANGE_012B_PID 0x012B +#define MTXORB_FTDI_RANGE_012C_PID 0x012C +#define MTXORB_FTDI_RANGE_012D_PID 0x012D +#define MTXORB_FTDI_RANGE_012E_PID 0x012E +#define MTXORB_FTDI_RANGE_012F_PID 0x012F +#define MTXORB_FTDI_RANGE_0130_PID 0x0130 +#define MTXORB_FTDI_RANGE_0131_PID 0x0131 +#define MTXORB_FTDI_RANGE_0132_PID 0x0132 +#define MTXORB_FTDI_RANGE_0133_PID 0x0133 +#define MTXORB_FTDI_RANGE_0134_PID 0x0134 +#define MTXORB_FTDI_RANGE_0135_PID 0x0135 +#define MTXORB_FTDI_RANGE_0136_PID 0x0136 +#define MTXORB_FTDI_RANGE_0137_PID 0x0137 +#define MTXORB_FTDI_RANGE_0138_PID 0x0138 +#define MTXORB_FTDI_RANGE_0139_PID 0x0139 +#define MTXORB_FTDI_RANGE_013A_PID 0x013A +#define MTXORB_FTDI_RANGE_013B_PID 0x013B +#define MTXORB_FTDI_RANGE_013C_PID 0x013C +#define MTXORB_FTDI_RANGE_013D_PID 0x013D +#define MTXORB_FTDI_RANGE_013E_PID 0x013E +#define MTXORB_FTDI_RANGE_013F_PID 0x013F +#define MTXORB_FTDI_RANGE_0140_PID 0x0140 +#define MTXORB_FTDI_RANGE_0141_PID 0x0141 +#define MTXORB_FTDI_RANGE_0142_PID 0x0142 +#define MTXORB_FTDI_RANGE_0143_PID 0x0143 +#define MTXORB_FTDI_RANGE_0144_PID 0x0144 +#define MTXORB_FTDI_RANGE_0145_PID 0x0145 +#define MTXORB_FTDI_RANGE_0146_PID 0x0146 +#define MTXORB_FTDI_RANGE_0147_PID 0x0147 +#define MTXORB_FTDI_RANGE_0148_PID 0x0148 +#define MTXORB_FTDI_RANGE_0149_PID 0x0149 +#define MTXORB_FTDI_RANGE_014A_PID 0x014A +#define MTXORB_FTDI_RANGE_014B_PID 0x014B +#define MTXORB_FTDI_RANGE_014C_PID 0x014C +#define MTXORB_FTDI_RANGE_014D_PID 0x014D +#define MTXORB_FTDI_RANGE_014E_PID 0x014E +#define MTXORB_FTDI_RANGE_014F_PID 0x014F +#define MTXORB_FTDI_RANGE_0150_PID 0x0150 +#define MTXORB_FTDI_RANGE_0151_PID 0x0151 +#define MTXORB_FTDI_RANGE_0152_PID 0x0152 +#define MTXORB_FTDI_RANGE_0153_PID 0x0153 +#define MTXORB_FTDI_RANGE_0154_PID 0x0154 +#define MTXORB_FTDI_RANGE_0155_PID 0x0155 +#define MTXORB_FTDI_RANGE_0156_PID 0x0156 +#define MTXORB_FTDI_RANGE_0157_PID 0x0157 +#define MTXORB_FTDI_RANGE_0158_PID 0x0158 +#define MTXORB_FTDI_RANGE_0159_PID 0x0159 +#define MTXORB_FTDI_RANGE_015A_PID 0x015A +#define MTXORB_FTDI_RANGE_015B_PID 0x015B +#define MTXORB_FTDI_RANGE_015C_PID 0x015C +#define MTXORB_FTDI_RANGE_015D_PID 0x015D +#define MTXORB_FTDI_RANGE_015E_PID 0x015E +#define MTXORB_FTDI_RANGE_015F_PID 0x015F +#define MTXORB_FTDI_RANGE_0160_PID 0x0160 +#define MTXORB_FTDI_RANGE_0161_PID 0x0161 +#define MTXORB_FTDI_RANGE_0162_PID 0x0162 +#define MTXORB_FTDI_RANGE_0163_PID 0x0163 +#define MTXORB_FTDI_RANGE_0164_PID 0x0164 +#define MTXORB_FTDI_RANGE_0165_PID 0x0165 +#define MTXORB_FTDI_RANGE_0166_PID 0x0166 +#define MTXORB_FTDI_RANGE_0167_PID 0x0167 +#define MTXORB_FTDI_RANGE_0168_PID 0x0168 +#define MTXORB_FTDI_RANGE_0169_PID 0x0169 +#define MTXORB_FTDI_RANGE_016A_PID 0x016A +#define MTXORB_FTDI_RANGE_016B_PID 0x016B +#define MTXORB_FTDI_RANGE_016C_PID 0x016C +#define MTXORB_FTDI_RANGE_016D_PID 0x016D +#define MTXORB_FTDI_RANGE_016E_PID 0x016E +#define MTXORB_FTDI_RANGE_016F_PID 0x016F +#define MTXORB_FTDI_RANGE_0170_PID 0x0170 +#define MTXORB_FTDI_RANGE_0171_PID 0x0171 +#define MTXORB_FTDI_RANGE_0172_PID 0x0172 +#define MTXORB_FTDI_RANGE_0173_PID 0x0173 +#define MTXORB_FTDI_RANGE_0174_PID 0x0174 +#define MTXORB_FTDI_RANGE_0175_PID 0x0175 +#define MTXORB_FTDI_RANGE_0176_PID 0x0176 +#define MTXORB_FTDI_RANGE_0177_PID 0x0177 +#define MTXORB_FTDI_RANGE_0178_PID 0x0178 +#define MTXORB_FTDI_RANGE_0179_PID 0x0179 +#define MTXORB_FTDI_RANGE_017A_PID 0x017A +#define MTXORB_FTDI_RANGE_017B_PID 0x017B +#define MTXORB_FTDI_RANGE_017C_PID 0x017C +#define MTXORB_FTDI_RANGE_017D_PID 0x017D +#define MTXORB_FTDI_RANGE_017E_PID 0x017E +#define MTXORB_FTDI_RANGE_017F_PID 0x017F +#define MTXORB_FTDI_RANGE_0180_PID 0x0180 +#define MTXORB_FTDI_RANGE_0181_PID 0x0181 +#define MTXORB_FTDI_RANGE_0182_PID 0x0182 +#define MTXORB_FTDI_RANGE_0183_PID 0x0183 +#define MTXORB_FTDI_RANGE_0184_PID 0x0184 +#define MTXORB_FTDI_RANGE_0185_PID 0x0185 +#define MTXORB_FTDI_RANGE_0186_PID 0x0186 +#define MTXORB_FTDI_RANGE_0187_PID 0x0187 +#define MTXORB_FTDI_RANGE_0188_PID 0x0188 +#define MTXORB_FTDI_RANGE_0189_PID 0x0189 +#define MTXORB_FTDI_RANGE_018A_PID 0x018A +#define MTXORB_FTDI_RANGE_018B_PID 0x018B +#define MTXORB_FTDI_RANGE_018C_PID 0x018C +#define MTXORB_FTDI_RANGE_018D_PID 0x018D +#define MTXORB_FTDI_RANGE_018E_PID 0x018E +#define MTXORB_FTDI_RANGE_018F_PID 0x018F +#define MTXORB_FTDI_RANGE_0190_PID 0x0190 +#define MTXORB_FTDI_RANGE_0191_PID 0x0191 +#define MTXORB_FTDI_RANGE_0192_PID 0x0192 +#define MTXORB_FTDI_RANGE_0193_PID 0x0193 +#define MTXORB_FTDI_RANGE_0194_PID 0x0194 +#define MTXORB_FTDI_RANGE_0195_PID 0x0195 +#define MTXORB_FTDI_RANGE_0196_PID 0x0196 +#define MTXORB_FTDI_RANGE_0197_PID 0x0197 +#define MTXORB_FTDI_RANGE_0198_PID 0x0198 +#define MTXORB_FTDI_RANGE_0199_PID 0x0199 +#define MTXORB_FTDI_RANGE_019A_PID 0x019A +#define MTXORB_FTDI_RANGE_019B_PID 0x019B +#define MTXORB_FTDI_RANGE_019C_PID 0x019C +#define MTXORB_FTDI_RANGE_019D_PID 0x019D +#define MTXORB_FTDI_RANGE_019E_PID 0x019E +#define MTXORB_FTDI_RANGE_019F_PID 0x019F +#define MTXORB_FTDI_RANGE_01A0_PID 0x01A0 +#define MTXORB_FTDI_RANGE_01A1_PID 0x01A1 +#define MTXORB_FTDI_RANGE_01A2_PID 0x01A2 +#define MTXORB_FTDI_RANGE_01A3_PID 0x01A3 +#define MTXORB_FTDI_RANGE_01A4_PID 0x01A4 +#define MTXORB_FTDI_RANGE_01A5_PID 0x01A5 +#define MTXORB_FTDI_RANGE_01A6_PID 0x01A6 +#define MTXORB_FTDI_RANGE_01A7_PID 0x01A7 +#define MTXORB_FTDI_RANGE_01A8_PID 0x01A8 +#define MTXORB_FTDI_RANGE_01A9_PID 0x01A9 +#define MTXORB_FTDI_RANGE_01AA_PID 0x01AA +#define MTXORB_FTDI_RANGE_01AB_PID 0x01AB +#define MTXORB_FTDI_RANGE_01AC_PID 0x01AC +#define MTXORB_FTDI_RANGE_01AD_PID 0x01AD +#define MTXORB_FTDI_RANGE_01AE_PID 0x01AE +#define MTXORB_FTDI_RANGE_01AF_PID 0x01AF +#define MTXORB_FTDI_RANGE_01B0_PID 0x01B0 +#define MTXORB_FTDI_RANGE_01B1_PID 0x01B1 +#define MTXORB_FTDI_RANGE_01B2_PID 0x01B2 +#define MTXORB_FTDI_RANGE_01B3_PID 0x01B3 +#define MTXORB_FTDI_RANGE_01B4_PID 0x01B4 +#define MTXORB_FTDI_RANGE_01B5_PID 0x01B5 +#define MTXORB_FTDI_RANGE_01B6_PID 0x01B6 +#define MTXORB_FTDI_RANGE_01B7_PID 0x01B7 +#define MTXORB_FTDI_RANGE_01B8_PID 0x01B8 +#define MTXORB_FTDI_RANGE_01B9_PID 0x01B9 +#define MTXORB_FTDI_RANGE_01BA_PID 0x01BA +#define MTXORB_FTDI_RANGE_01BB_PID 0x01BB +#define MTXORB_FTDI_RANGE_01BC_PID 0x01BC +#define MTXORB_FTDI_RANGE_01BD_PID 0x01BD +#define MTXORB_FTDI_RANGE_01BE_PID 0x01BE +#define MTXORB_FTDI_RANGE_01BF_PID 0x01BF +#define MTXORB_FTDI_RANGE_01C0_PID 0x01C0 +#define MTXORB_FTDI_RANGE_01C1_PID 0x01C1 +#define MTXORB_FTDI_RANGE_01C2_PID 0x01C2 +#define MTXORB_FTDI_RANGE_01C3_PID 0x01C3 +#define MTXORB_FTDI_RANGE_01C4_PID 0x01C4 +#define MTXORB_FTDI_RANGE_01C5_PID 0x01C5 +#define MTXORB_FTDI_RANGE_01C6_PID 0x01C6 +#define MTXORB_FTDI_RANGE_01C7_PID 0x01C7 +#define MTXORB_FTDI_RANGE_01C8_PID 0x01C8 +#define MTXORB_FTDI_RANGE_01C9_PID 0x01C9 +#define MTXORB_FTDI_RANGE_01CA_PID 0x01CA +#define MTXORB_FTDI_RANGE_01CB_PID 0x01CB +#define MTXORB_FTDI_RANGE_01CC_PID 0x01CC +#define MTXORB_FTDI_RANGE_01CD_PID 0x01CD +#define MTXORB_FTDI_RANGE_01CE_PID 0x01CE +#define MTXORB_FTDI_RANGE_01CF_PID 0x01CF +#define MTXORB_FTDI_RANGE_01D0_PID 0x01D0 +#define MTXORB_FTDI_RANGE_01D1_PID 0x01D1 +#define MTXORB_FTDI_RANGE_01D2_PID 0x01D2 +#define MTXORB_FTDI_RANGE_01D3_PID 0x01D3 +#define MTXORB_FTDI_RANGE_01D4_PID 0x01D4 +#define MTXORB_FTDI_RANGE_01D5_PID 0x01D5 +#define MTXORB_FTDI_RANGE_01D6_PID 0x01D6 +#define MTXORB_FTDI_RANGE_01D7_PID 0x01D7 +#define MTXORB_FTDI_RANGE_01D8_PID 0x01D8 +#define MTXORB_FTDI_RANGE_01D9_PID 0x01D9 +#define MTXORB_FTDI_RANGE_01DA_PID 0x01DA +#define MTXORB_FTDI_RANGE_01DB_PID 0x01DB +#define MTXORB_FTDI_RANGE_01DC_PID 0x01DC +#define MTXORB_FTDI_RANGE_01DD_PID 0x01DD +#define MTXORB_FTDI_RANGE_01DE_PID 0x01DE +#define MTXORB_FTDI_RANGE_01DF_PID 0x01DF +#define MTXORB_FTDI_RANGE_01E0_PID 0x01E0 +#define MTXORB_FTDI_RANGE_01E1_PID 0x01E1 +#define MTXORB_FTDI_RANGE_01E2_PID 0x01E2 +#define MTXORB_FTDI_RANGE_01E3_PID 0x01E3 +#define MTXORB_FTDI_RANGE_01E4_PID 0x01E4 +#define MTXORB_FTDI_RANGE_01E5_PID 0x01E5 +#define MTXORB_FTDI_RANGE_01E6_PID 0x01E6 +#define MTXORB_FTDI_RANGE_01E7_PID 0x01E7 +#define MTXORB_FTDI_RANGE_01E8_PID 0x01E8 +#define MTXORB_FTDI_RANGE_01E9_PID 0x01E9 +#define MTXORB_FTDI_RANGE_01EA_PID 0x01EA +#define MTXORB_FTDI_RANGE_01EB_PID 0x01EB +#define MTXORB_FTDI_RANGE_01EC_PID 0x01EC +#define MTXORB_FTDI_RANGE_01ED_PID 0x01ED +#define MTXORB_FTDI_RANGE_01EE_PID 0x01EE +#define MTXORB_FTDI_RANGE_01EF_PID 0x01EF +#define MTXORB_FTDI_RANGE_01F0_PID 0x01F0 +#define MTXORB_FTDI_RANGE_01F1_PID 0x01F1 +#define MTXORB_FTDI_RANGE_01F2_PID 0x01F2 +#define MTXORB_FTDI_RANGE_01F3_PID 0x01F3 +#define MTXORB_FTDI_RANGE_01F4_PID 0x01F4 +#define MTXORB_FTDI_RANGE_01F5_PID 0x01F5 +#define MTXORB_FTDI_RANGE_01F6_PID 0x01F6 +#define MTXORB_FTDI_RANGE_01F7_PID 0x01F7 +#define MTXORB_FTDI_RANGE_01F8_PID 0x01F8 +#define MTXORB_FTDI_RANGE_01F9_PID 0x01F9 +#define MTXORB_FTDI_RANGE_01FA_PID 0x01FA +#define MTXORB_FTDI_RANGE_01FB_PID 0x01FB +#define MTXORB_FTDI_RANGE_01FC_PID 0x01FC +#define MTXORB_FTDI_RANGE_01FD_PID 0x01FD +#define MTXORB_FTDI_RANGE_01FE_PID 0x01FE +#define MTXORB_FTDI_RANGE_01FF_PID 0x01FF + + /* Interbiometrics USB I/O Board */ /* Developed for Interbiometrics by Rudolf Gugler */ @@ -204,7 +478,7 @@ /* * DSS-20 Sync Station for Sony Ericsson P800 */ -#define FTDI_DSS20_PID 0xFC82 +#define FTDI_DSS20_PID 0xFC82 /* * Home Electronics (www.home-electro.com) USB gadgets @@ -256,7 +530,9 @@ #define FTDI_ELV_WS300PC_PID 0xE0F6 /* PC-Wetterstation (WS 300 PC) */ #define FTDI_ELV_FHZ1300PC_PID 0xE0E8 /* FHZ 1300 PC */ #define FTDI_ELV_WS500_PID 0xE0E9 /* PC-Wetterstation (WS 500) */ +#define FTDI_ELV_HS485_PID 0xE0EA /* USB to RS-485 adapter */ #define FTDI_ELV_EM1010PC_PID 0xE0EF /* Engery monitor EM 1010 PC */ +#define FTDI_PHI_FISCO_PID 0xE40B /* PHI Fisco USB to Serial cable */ /* * Definitions for ID TECH (www.idt-net.com) devices @@ -358,6 +634,11 @@ #define FTDI_SUUNTO_SPORTS_PID 0xF680 /* Suunto Sports instrument */ /* + * Oceanic product ids + */ +#define FTDI_OCEANIC_PID 0xF460 /* Oceanic dive instrument */ + +/* * TTi (Thurlby Thandar Instruments) */ #define TTI_VID 0x103E /* Vendor Id */ @@ -480,6 +761,7 @@ #define PAPOUCH_VID 0x5050 /* Vendor ID */ #define PAPOUCH_TMU_PID 0x0400 /* TMU USB Thermometer */ +#define PAPOUCH_QUIDO4x4_PID 0x0900 /* Quido 4/4 Module */ /* * ACG Identification Technologies GmbH products (http://www.acg.de/). @@ -547,6 +829,11 @@ #define OLIMEX_VID 0x15BA #define OLIMEX_ARM_USB_OCD_PID 0x0003 +/* Luminary Micro Stellaris Boards, VID = FTDI_VID */ +/* FTDI 2332C Dual channel device, side A=245 FIFO (JTAG), Side B=RS232 UART */ +#define LMI_LM3S_DEVEL_BOARD_PID 0xbcd8 +#define LMI_LM3S_EVAL_BOARD_PID 0xbcd9 + /* www.elsterelectricity.com Elster Unicom III Optical Probe */ #define FTDI_ELSTER_UNICOM_PID 0xE700 /* Product Id */ @@ -557,6 +844,23 @@ #define TML_VID 0x1B91 /* Vendor ID */ #define TML_USB_SERIAL_PID 0x0064 /* USB - Serial Converter */ +/* NDI Polaris System */ +#define FTDI_NDI_HUC_PID 0xDA70 + +/* Propox devices */ +#define FTDI_PROPOX_JTAGCABLEII_PID 0xD738 + +/* Rig Expert Ukraine devices */ +#define FTDI_REU_TINY_PID 0xED22 /* RigExpert Tiny */ + +/* Domintell products http://www.domintell.com */ +#define FTDI_DOMINTELL_DGQG_PID 0xEF50 /* Master */ +#define FTDI_DOMINTELL_DUSB_PID 0xEF51 /* DUSB01 module */ + +/* Alti-2 products http://www.alti-2.com */ +#define ALTI2_VID 0x1BC9 +#define ALTI2_N3_PID 0x6001 /* Neptune 3 */ + /* Commands */ #define FTDI_SIO_RESET 0 /* Reset the port */ #define FTDI_SIO_MODEM_CTRL 1 /* Set the modem control register */ @@ -578,6 +882,37 @@ #define FIC_NEO1973_DEBUG_PID 0x5118 /* + * RATOC REX-USB60F + */ +#define RATOC_VENDOR_ID 0x0584 +#define RATOC_PRODUCT_ID_USB60F 0xb020 + +/* + * DIEBOLD BCS SE923 + */ +#define DIEBOLD_BCS_SE923_PID 0xfb99 + +/* + * Atmel STK541 + */ +#define ATMEL_VID 0x03eb /* Vendor ID */ +#define STK541_PID 0x2109 /* Zigbee Controller */ + +/* + * Dresden Elektronic Sensor Terminal Board + */ +#define DE_VID 0x1cf1 /* Vendor ID */ +#define STB_PID 0x0001 /* Sensor Terminal Board */ +#define WHT_PID 0x0004 /* Wireless Handheld Terminal */ + +/* + * Blackfin gnICE JTAG + * http://docs.blackfin.uclinux.org/doku.php?id=hw:jtag:gnice + */ +#define ADI_VID 0x0456 +#define ADI_GNICE_PID 0xF000 + +/* * BmRequestType: 1100 0000b * bRequest: FTDI_E2_READ * wValue: 0 @@ -604,7 +939,7 @@ /* * BmRequestType: 0100 0000B * bRequest: FTDI_SIO_RESET - * wValue: Control Value + * wValue: Control Value * 0 = Reset SIO * 1 = Purge RX buffer * 2 = Purge TX buffer @@ -672,7 +1007,7 @@ * 101 - add .625 to divisor * 110 - add .750 to divisor * 111 - add .875 to divisor - * Bits 15 to 0 of the 17-bit divisor are placed in the urb value. Bit 16 is + * Bits 15 to 0 of the 17-bit divisor are placed in the urb value. Bit 16 is * placed in bit 0 of the urb index. * * Note that there are a couple of special cases to support the highest baud @@ -691,8 +1026,8 @@ typedef enum { } ftdi_chip_type_t; typedef enum { - ftdi_sio_b300 = 0, - ftdi_sio_b600 = 1, + ftdi_sio_b300 = 0, + ftdi_sio_b600 = 1, ftdi_sio_b1200 = 2, ftdi_sio_b2400 = 3, ftdi_sio_b4800 = 4, @@ -701,7 +1036,7 @@ typedef enum { ftdi_sio_b38400 = 7, ftdi_sio_b57600 = 8, ftdi_sio_b115200 = 9 -} FTDI_SIO_baudrate_t ; +} FTDI_SIO_baudrate_t; /* * The ftdi_8U232AM_xxMHz_byyy constants have been removed. The encoded divisor values @@ -710,19 +1045,19 @@ typedef enum { #define FTDI_SIO_SET_DATA_REQUEST FTDI_SIO_SET_DATA #define FTDI_SIO_SET_DATA_REQUEST_TYPE 0x40 -#define FTDI_SIO_SET_DATA_PARITY_NONE (0x0 << 8 ) -#define FTDI_SIO_SET_DATA_PARITY_ODD (0x1 << 8 ) -#define FTDI_SIO_SET_DATA_PARITY_EVEN (0x2 << 8 ) -#define FTDI_SIO_SET_DATA_PARITY_MARK (0x3 << 8 ) -#define FTDI_SIO_SET_DATA_PARITY_SPACE (0x4 << 8 ) -#define FTDI_SIO_SET_DATA_STOP_BITS_1 (0x0 << 11 ) -#define FTDI_SIO_SET_DATA_STOP_BITS_15 (0x1 << 11 ) -#define FTDI_SIO_SET_DATA_STOP_BITS_2 (0x2 << 11 ) +#define FTDI_SIO_SET_DATA_PARITY_NONE (0x0 << 8) +#define FTDI_SIO_SET_DATA_PARITY_ODD (0x1 << 8) +#define FTDI_SIO_SET_DATA_PARITY_EVEN (0x2 << 8) +#define FTDI_SIO_SET_DATA_PARITY_MARK (0x3 << 8) +#define FTDI_SIO_SET_DATA_PARITY_SPACE (0x4 << 8) +#define FTDI_SIO_SET_DATA_STOP_BITS_1 (0x0 << 11) +#define FTDI_SIO_SET_DATA_STOP_BITS_15 (0x1 << 11) +#define FTDI_SIO_SET_DATA_STOP_BITS_2 (0x2 << 11) #define FTDI_SIO_SET_BREAK (0x1 << 14) /* FTDI_SIO_SET_DATA */ /* - * BmRequestType: 0100 0000B + * BmRequestType: 0100 0000B * bRequest: FTDI_SIO_SET_DATA * wValue: Data characteristics (see below) * wIndex: Port @@ -755,7 +1090,7 @@ typedef enum { #define FTDI_SIO_SET_MODEM_CTRL_REQUEST_TYPE 0x40 #define FTDI_SIO_SET_MODEM_CTRL_REQUEST FTDI_SIO_MODEM_CTRL -/* +/* * BmRequestType: 0100 0000B * bRequest: FTDI_SIO_MODEM_CTRL * wValue: ControlValue (see below) @@ -769,11 +1104,11 @@ typedef enum { */ #define FTDI_SIO_SET_DTR_MASK 0x1 -#define FTDI_SIO_SET_DTR_HIGH ( 1 | ( FTDI_SIO_SET_DTR_MASK << 8)) -#define FTDI_SIO_SET_DTR_LOW ( 0 | ( FTDI_SIO_SET_DTR_MASK << 8)) +#define FTDI_SIO_SET_DTR_HIGH (1 | (FTDI_SIO_SET_DTR_MASK << 8)) +#define FTDI_SIO_SET_DTR_LOW (0 | (FTDI_SIO_SET_DTR_MASK << 8)) #define FTDI_SIO_SET_RTS_MASK 0x2 -#define FTDI_SIO_SET_RTS_HIGH ( 2 | ( FTDI_SIO_SET_RTS_MASK << 8 )) -#define FTDI_SIO_SET_RTS_LOW ( 0 | ( FTDI_SIO_SET_RTS_MASK << 8 )) +#define FTDI_SIO_SET_RTS_HIGH (2 | (FTDI_SIO_SET_RTS_MASK << 8)) +#define FTDI_SIO_SET_RTS_LOW (0 | (FTDI_SIO_SET_RTS_MASK << 8)) /* * ControlValue @@ -796,7 +1131,7 @@ typedef enum { /* FTDI_SIO_SET_FLOW_CTRL */ #define FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE 0x40 #define FTDI_SIO_SET_FLOW_CTRL_REQUEST FTDI_SIO_SET_FLOW_CTRL -#define FTDI_SIO_DISABLE_FLOW_CTRL 0x0 +#define FTDI_SIO_DISABLE_FLOW_CTRL 0x0 #define FTDI_SIO_RTS_CTS_HS (0x1 << 8) #define FTDI_SIO_DTR_DSR_HS (0x2 << 8) #define FTDI_SIO_XON_XOFF_HS (0x4 << 8) @@ -805,7 +1140,7 @@ typedef enum { * bRequest: FTDI_SIO_SET_FLOW_CTRL * wValue: Xoff/Xon * wIndex: Protocol/Port - hIndex is protocl / lIndex is port - * wLength: 0 + * wLength: 0 * Data: None * * hIndex protocol is: @@ -821,10 +1156,10 @@ typedef enum { * * A value of zero in the hIndex field disables handshaking * - * If Xon/Xoff handshaking is specified, the hValue field should contain the XOFF character + * If Xon/Xoff handshaking is specified, the hValue field should contain the XOFF character * and the lValue field contains the XON character. - */ - + */ + /* * FTDI_SIO_GET_LATENCY_TIMER * @@ -838,7 +1173,7 @@ typedef enum { #define FTDI_SIO_GET_LATENCY_TIMER_REQUEST FTDI_SIO_GET_LATENCY_TIMER #define FTDI_SIO_GET_LATENCY_TIMER_REQUEST_TYPE 0xC0 -/* +/* * BmRequestType: 1100 0000b * bRequest: FTDI_SIO_GET_LATENCY_TIMER * wValue: 0 @@ -847,7 +1182,7 @@ typedef enum { * Data: latency (on return) */ -/* +/* * FTDI_SIO_SET_LATENCY_TIMER * * Set the timeout interval. The FTDI collects data from the slave @@ -860,7 +1195,7 @@ typedef enum { #define FTDI_SIO_SET_LATENCY_TIMER_REQUEST FTDI_SIO_SET_LATENCY_TIMER #define FTDI_SIO_SET_LATENCY_TIMER_REQUEST_TYPE 0x40 -/* +/* * BmRequestType: 0100 0000b * bRequest: FTDI_SIO_SET_LATENCY_TIMER * wValue: Latency (milliseconds) @@ -875,7 +1210,7 @@ typedef enum { */ /* - * FTDI_SIO_SET_EVENT_CHAR + * FTDI_SIO_SET_EVENT_CHAR * * Set the special event character for the specified communications port. * If the device sees this character it will immediately return the @@ -888,7 +1223,7 @@ typedef enum { #define FTDI_SIO_SET_EVENT_CHAR_REQUEST_TYPE 0x40 -/* +/* * BmRequestType: 0100 0000b * bRequest: FTDI_SIO_SET_EVENT_CHAR * wValue: EventChar @@ -904,12 +1239,12 @@ typedef enum { * B9..15 Reserved * */ - + /* FTDI_SIO_SET_ERROR_CHAR */ /* Set the parity error replacement character for the specified communications port */ -/* +/* * BmRequestType: 0100 0000b * bRequest: FTDI_SIO_SET_EVENT_CHAR * wValue: Error Char @@ -935,15 +1270,15 @@ typedef enum { #define FTDI_SIO_DSR_MASK 0x20 #define FTDI_SIO_RI_MASK 0x40 #define FTDI_SIO_RLSD_MASK 0x80 -/* +/* * BmRequestType: 1100 0000b * bRequest: FTDI_SIO_GET_MODEM_STATUS * wValue: zero * wIndex: Port * wLength: 1 * Data: Status - * - * One byte of data is returned + * + * One byte of data is returned * B0..3 0 * B4 CTS * 0 = inactive @@ -956,15 +1291,15 @@ typedef enum { * 1 = active * B7 Receive Line Signal Detect (RLSD) * 0 = inactive - * 1 = active + * 1 = active */ -/* Descriptors returned by the device - * +/* Descriptors returned by the device + * * Device Descriptor - * + * * Offset Field Size Value Description * 0 bLength 1 0x12 Size of descriptor in bytes * 1 bDescriptorType 1 0x01 DEVICE Descriptor Type @@ -980,9 +1315,9 @@ typedef enum { * 15 iProduct 1 0x02 Index of prod string desc * 16 iSerialNumber 1 0x02 Index of serial nmr string desc * 17 bNumConfigurations 1 0x01 Number of possible configurations - * + * * Configuration Descriptor - * + * * Offset Field Size Value * 0 bLength 1 0x09 Size of descriptor in bytes * 1 bDescriptorType 1 0x02 CONFIGURATION Descriptor Type @@ -992,9 +1327,9 @@ typedef enum { * 6 iConfiguration 1 0x02 Index of config string descriptor * 7 bmAttributes 1 0x20 Config characteristics Remote Wakeup * 8 MaxPower 1 0x1E Max power consumption - * + * * Interface Descriptor - * + * * Offset Field Size Value * 0 bLength 1 0x09 Size of descriptor in bytes * 1 bDescriptorType 1 0x04 INTERFACE Descriptor Type @@ -1005,9 +1340,9 @@ typedef enum { * 6 bInterfaceSubClass 1 0xFF Subclass Code * 7 bInterfaceProtocol 1 0xFF Protocol Code * 8 iInterface 1 0x02 Index of interface string description - * + * * IN Endpoint Descriptor - * + * * Offset Field Size Value * 0 bLength 1 0x07 Size of descriptor in bytes * 1 bDescriptorType 1 0x05 ENDPOINT descriptor type @@ -1015,9 +1350,9 @@ typedef enum { * 3 bmAttributes 1 0x02 Endpoint attributes - Bulk * 4 bNumEndpoints 2 0x0040 maximum packet size * 5 bInterval 1 0x00 Interval for polling endpoint - * + * * OUT Endpoint Descriptor - * + * * Offset Field Size Value * 0 bLength 1 0x07 Size of descriptor in bytes * 1 bDescriptorType 1 0x05 ENDPOINT descriptor type @@ -1025,17 +1360,17 @@ typedef enum { * 3 bmAttributes 1 0x02 Endpoint attributes - Bulk * 4 bNumEndpoints 2 0x0040 maximum packet size * 5 bInterval 1 0x00 Interval for polling endpoint - * + * * DATA FORMAT - * + * * IN Endpoint - * + * * The device reserves the first two bytes of data on this endpoint to contain the current * values of the modem and line status registers. In the absence of data, the device * generates a message consisting of these two status bytes every 40 ms - * + * * Byte 0: Modem Status - * + * * Offset Description * B0 Reserved - must be 1 * B1 Reserved - must be 0 @@ -1045,9 +1380,9 @@ typedef enum { * B5 Data Set Ready (DSR) * B6 Ring Indicator (RI) * B7 Receive Line Signal Detect (RLSD) - * + * * Byte 1: Line Status - * + * * Offset Description * B0 Data Ready (DR) * B1 Overrun Error (OE) @@ -1057,7 +1392,7 @@ typedef enum { * B5 Transmitter Holding Register (THRE) * B6 Transmitter Empty (TEMT) * B7 Error in RCVR FIFO - * + * */ #define FTDI_RS0_CTS (1 << 4) #define FTDI_RS0_DSR (1 << 5) @@ -1075,17 +1410,17 @@ typedef enum { /* * OUT Endpoint - * + * * This device reserves the first bytes of data on this endpoint contain the length * and port identifier of the message. For the FTDI USB Serial converter the port * identifier is always 1. - * + * * Byte 0: Line Status - * + * * Offset Description * B0 Reserved - must be 1 * B1 Reserved - must be 0 * B2..7 Length of message - (not including Byte 0) - * + * */