X-Git-Url: http://ftp.safe.ca/?a=blobdiff_plain;f=drivers%2Fspi%2FMakefile;h=f3d2810ba11c9f3fd11cbdaddf9b50431e70b70b;hb=e071041be037eca208b62b84469a06bdfc692bea;hp=89293338f20c3e93a9a1f8a351a1c313453ee841;hpb=78961a5740374a8143f8fe120300f2ed160dd276;p=safe%2Fjmp%2Flinux-2.6

diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index 8929333..f3d2810 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -16,19 +16,42 @@ obj-$(CONFIG_SPI_BFIN)			+= spi_bfin5xx.o
 obj-$(CONFIG_SPI_BITBANG)		+= spi_bitbang.o
 obj-$(CONFIG_SPI_AU1550)		+= au1550_spi.o
 obj-$(CONFIG_SPI_BUTTERFLY)		+= spi_butterfly.o
+obj-$(CONFIG_SPI_DESIGNWARE)		+= dw_spi.o
+obj-$(CONFIG_SPI_DW_PCI)		+= dw_spi_pci.o
+obj-$(CONFIG_SPI_GPIO)			+= spi_gpio.o
 obj-$(CONFIG_SPI_IMX)			+= spi_imx.o
 obj-$(CONFIG_SPI_LM70_LLP)		+= spi_lm70llp.o
 obj-$(CONFIG_SPI_PXA2XX)		+= pxa2xx_spi.o
 obj-$(CONFIG_SPI_OMAP_UWIRE)		+= omap_uwire.o
+obj-$(CONFIG_SPI_OMAP24XX)		+= omap2_mcspi.o
+obj-$(CONFIG_SPI_OMAP_100K)		+= omap_spi_100k.o
+obj-$(CONFIG_SPI_ORION)			+= orion_spi.o
+obj-$(CONFIG_SPI_PL022)			+= amba-pl022.o
 obj-$(CONFIG_SPI_MPC52xx_PSC)		+= mpc52xx_psc_spi.o
-obj-$(CONFIG_SPI_MPC83xx)		+= spi_mpc83xx.o
+obj-$(CONFIG_SPI_MPC52xx)		+= mpc52xx_spi.o
+obj-$(CONFIG_SPI_MPC8xxx)		+= spi_mpc8xxx.o
+obj-$(CONFIG_SPI_PPC4xx)		+= spi_ppc4xx.o
 obj-$(CONFIG_SPI_S3C24XX_GPIO)		+= spi_s3c24xx_gpio.o
-obj-$(CONFIG_SPI_S3C24XX)		+= spi_s3c24xx.o
+obj-$(CONFIG_SPI_S3C24XX)		+= spi_s3c24xx_hw.o
+obj-$(CONFIG_SPI_S3C64XX)		+= spi_s3c64xx.o
+obj-$(CONFIG_SPI_TXX9)			+= spi_txx9.o
+obj-$(CONFIG_SPI_XILINX)		+= xilinx_spi.o
+obj-$(CONFIG_SPI_XILINX_OF)		+= xilinx_spi_of.o
+obj-$(CONFIG_SPI_XILINX_PLTFM)		+= xilinx_spi_pltfm.o
+obj-$(CONFIG_SPI_SH_SCI)		+= spi_sh_sci.o
+obj-$(CONFIG_SPI_SH_MSIOF)		+= spi_sh_msiof.o
+obj-$(CONFIG_SPI_STMP3XXX)		+= spi_stmp.o
+obj-$(CONFIG_SPI_NUC900)		+= spi_nuc900.o
+
+# special build for s3c24xx spi driver with fiq support
+spi_s3c24xx_hw-y			:= spi_s3c24xx.o
+spi_s3c24xx_hw-$(CONFIG_SPI_S3C24XX_FIQ) += spi_s3c24xx_fiq.o
+
 # 	... add above this line ...
 
 # SPI protocol drivers (device/link on bus)
-obj-$(CONFIG_SPI_AT25)		+= at25.o
 obj-$(CONFIG_SPI_SPIDEV)	+= spidev.o
+obj-$(CONFIG_SPI_TLE62X0)	+= tle62x0.o
 # 	... add above this line ...
 
 # SPI slave controller drivers (upstream link)