X-Git-Url: http://ftp.safe.ca/?a=blobdiff_plain;f=drivers%2Fserial%2Fsn_console.c;h=41fc61264443578e77fc4deb16ef276c79d2d502;hb=c639d14e2f70d086842d37fb8e4f5ab9bd56af2e;hp=956b2cf08e1e09f39d90f0a4d12df15b93817979;hpb=8c1addbc752660e95bbf2128d66b8e5bb38d5fc7;p=safe%2Fjmp%2Flinux-2.6

diff --git a/drivers/serial/sn_console.c b/drivers/serial/sn_console.c
index 956b2cf..41fc612 100644
--- a/drivers/serial/sn_console.c
+++ b/drivers/serial/sn_console.c
@@ -361,8 +361,8 @@ static int snp_startup(struct uart_port *port)
  *
  */
 static void
-snp_set_termios(struct uart_port *port, struct termios *termios,
-		struct termios *old)
+snp_set_termios(struct uart_port *port, struct ktermios *termios,
+		struct ktermios *old)
 {
 }
 
@@ -636,25 +636,6 @@ static irqreturn_t sn_sal_interrupt(int irq, void *dev_id)
 }
 
 /**
- * sn_sal_connect_interrupt - Request interrupt, handled by sn_sal_interrupt
- * @port: Our sn_cons_port (which contains the uart port)
- *
- * returns the console irq if interrupt is successfully registered, else 0
- *
- */
-static int sn_sal_connect_interrupt(struct sn_cons_port *port)
-{
-	if (request_irq(SGI_UART_VECTOR, sn_sal_interrupt,
-			IRQF_DISABLED | IRQF_SHARED,
-			"SAL console driver", port) >= 0) {
-		return SGI_UART_VECTOR;
-	}
-
-	printk(KERN_INFO "sn_console: console proceeding in polled mode\n");
-	return 0;
-}
-
-/**
  * sn_sal_timer_poll - this function handles polled console mode
  * @data: A pointer to our sn_cons_port (which contains the uart port)
  *
@@ -746,30 +727,31 @@ static void __init sn_sal_switch_to_asynch(struct sn_cons_port *port)
  * mode.  We were previously in asynch/polling mode (using init_timer).
  *
  * We attempt to switch to interrupt mode here by calling
- * sn_sal_connect_interrupt.  If that works out, we enable receive interrupts.
+ * request_irq.  If that works out, we enable receive interrupts.
  */
 static void __init sn_sal_switch_to_interrupts(struct sn_cons_port *port)
 {
-	int irq;
 	unsigned long flags;
 
-	if (!port)
-		return;
-
-	DPRINTF("sn_console: switching to interrupt driven console\n");
-
-	spin_lock_irqsave(&port->sc_port.lock, flags);
+	if (port) {
+		DPRINTF("sn_console: switching to interrupt driven console\n");
 
-	irq = sn_sal_connect_interrupt(port);
+		if (request_irq(SGI_UART_VECTOR, sn_sal_interrupt,
+				IRQF_DISABLED | IRQF_SHARED,
+				"SAL console driver", port) >= 0) {
+			spin_lock_irqsave(&port->sc_port.lock, flags);
+			port->sc_port.irq = SGI_UART_VECTOR;
+			port->sc_ops = &intr_ops;
 
-	if (irq) {
-		port->sc_port.irq = irq;
-		port->sc_ops = &intr_ops;
-
-		/* turn on receive interrupts */
-		ia64_sn_console_intr_enable(SAL_CONSOLE_INTR_RECV);
+			/* turn on receive interrupts */
+			ia64_sn_console_intr_enable(SAL_CONSOLE_INTR_RECV);
+			spin_unlock_irqrestore(&port->sc_port.lock, flags);
+		}
+		else {
+			printk(KERN_INFO
+			    "sn_console: console proceeding in polled mode\n");
+		}
 	}
-	spin_unlock_irqrestore(&port->sc_port.lock, flags);
 }
 
 /*
@@ -777,7 +759,7 @@ static void __init sn_sal_switch_to_interrupts(struct sn_cons_port *port)
  */
 
 static void sn_sal_console_write(struct console *, const char *, unsigned);
-static int __init sn_sal_console_setup(struct console *, char *);
+static int sn_sal_console_setup(struct console *, char *);
 static struct uart_driver sal_console_uart;
 extern struct tty_driver *uart_console_device(struct console *, int *);
 
@@ -1024,7 +1006,7 @@ sn_sal_console_write(struct console *co, const char *s, unsigned count)
  * here so providing it is easier.
  *
  */
-static int __init sn_sal_console_setup(struct console *co, char *options)
+static int sn_sal_console_setup(struct console *co, char *options)
 {
 	return 0;
 }