X-Git-Url: http://ftp.safe.ca/?a=blobdiff_plain;f=drivers%2Fserial%2Fpmac_zilog.c;h=794bd0f50d7374533489a888ae19cf2763704fe4;hb=d7d313000ba2fc94a5383511a17ff38a39bab928;hp=5f52883e64d2ade773b968edd967e395121a58bd;hpb=f392ecfa12de9a2baf72789b00557bac040d6171;p=safe%2Fjmp%2Flinux-2.6 diff --git a/drivers/serial/pmac_zilog.c b/drivers/serial/pmac_zilog.c index 5f52883..794bd0f 100644 --- a/drivers/serial/pmac_zilog.c +++ b/drivers/serial/pmac_zilog.c @@ -42,7 +42,6 @@ #undef DEBUG_HARD #undef USE_CTRL_O_SYSRQ -#include #include #include @@ -69,7 +68,6 @@ #include #include #include -#include #if defined (CONFIG_SERIAL_PMACZILOG_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) #define SUPPORT_SYSRQ @@ -90,6 +88,16 @@ MODULE_LICENSE("GPL"); #define PWRDBG(fmt, arg...) printk(KERN_DEBUG fmt , ## arg) +#ifdef CONFIG_SERIAL_PMACZILOG_TTYS +#define PMACZILOG_MAJOR TTY_MAJOR +#define PMACZILOG_MINOR 64 +#define PMACZILOG_NAME "ttyS" +#else +#define PMACZILOG_MAJOR 204 +#define PMACZILOG_MINOR 192 +#define PMACZILOG_NAME "ttyPZ" +#endif + /* * For the sake of early serial console, we can do a pre-probe @@ -101,10 +109,10 @@ static DEFINE_MUTEX(pmz_irq_mutex); static struct uart_driver pmz_uart_reg = { .owner = THIS_MODULE, - .driver_name = "ttyS", - .devfs_name = "tts/", - .dev_name = "ttyS", - .major = TTY_MAJOR, + .driver_name = PMACZILOG_NAME, + .dev_name = PMACZILOG_NAME, + .major = PMACZILOG_MAJOR, + .minor = PMACZILOG_MINOR, }; @@ -207,8 +215,7 @@ static void pmz_maybe_update_regs(struct uart_pmac_port *uap) } } -static struct tty_struct *pmz_receive_chars(struct uart_pmac_port *uap, - struct pt_regs *regs) +static struct tty_struct *pmz_receive_chars(struct uart_pmac_port *uap) { struct tty_struct *tty = NULL; unsigned char ch, r1, drop, error, flag; @@ -270,7 +277,7 @@ static struct tty_struct *pmz_receive_chars(struct uart_pmac_port *uap, if (uap->port.sysrq) { int swallow; spin_unlock(&uap->port.lock); - swallow = uart_handle_sysrq_char(&uap->port, ch, regs); + swallow = uart_handle_sysrq_char(&uap->port, ch); spin_lock(&uap->port.lock); if (swallow) goto next_char; @@ -338,7 +345,7 @@ static struct tty_struct *pmz_receive_chars(struct uart_pmac_port *uap, return tty; } -static void pmz_status_handle(struct uart_pmac_port *uap, struct pt_regs *regs) +static void pmz_status_handle(struct uart_pmac_port *uap) { unsigned char status; @@ -441,7 +448,7 @@ ack_tx_int: } /* Hrm... we register that twice, fixme later.... */ -static irqreturn_t pmz_interrupt(int irq, void *dev_id, struct pt_regs *regs) +static irqreturn_t pmz_interrupt(int irq, void *dev_id) { struct uart_pmac_port *uap = dev_id; struct uart_pmac_port *uap_a; @@ -465,9 +472,9 @@ static irqreturn_t pmz_interrupt(int irq, void *dev_id, struct pt_regs *regs) write_zsreg(uap_a, R0, RES_H_IUS); zssync(uap_a); if (r3 & CHAEXT) - pmz_status_handle(uap_a, regs); + pmz_status_handle(uap_a); if (r3 & CHARxIP) - tty = pmz_receive_chars(uap_a, regs); + tty = pmz_receive_chars(uap_a); if (r3 & CHATxIP) pmz_transmit_chars(uap_a); rc = IRQ_HANDLED; @@ -485,9 +492,9 @@ static irqreturn_t pmz_interrupt(int irq, void *dev_id, struct pt_regs *regs) write_zsreg(uap_b, R0, RES_H_IUS); zssync(uap_b); if (r3 & CHBEXT) - pmz_status_handle(uap_b, regs); + pmz_status_handle(uap_b); if (r3 & CHBRxIP) - tty = pmz_receive_chars(uap_b, regs); + tty = pmz_receive_chars(uap_b); if (r3 & CHBTxIP) pmz_transmit_chars(uap_b); rc = IRQ_HANDLED; @@ -937,7 +944,7 @@ static int pmz_startup(struct uart_port *port) } pmz_get_port_A(uap)->flags |= PMACZILOG_FLAG_IS_IRQ_ON; - if (request_irq(uap->port.irq, pmz_interrupt, SA_SHIRQ, "PowerMac Zilog", uap)) { + if (request_irq(uap->port.irq, pmz_interrupt, IRQF_SHARED, "PowerMac Zilog", uap)) { dev_err(&uap->dev->ofdev.dev, "Unable to register zs interrupt handler.\n"); pmz_set_scc_power(uap, 0); @@ -1266,8 +1273,8 @@ static void pmz_irda_setup(struct uart_pmac_port *uap, unsigned long *baud) } -static void __pmz_set_termios(struct uart_port *port, struct termios *termios, - struct termios *old) +static void __pmz_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) { struct uart_pmac_port *uap = to_pmz(port); unsigned long baud; @@ -1277,7 +1284,7 @@ static void __pmz_set_termios(struct uart_port *port, struct termios *termios, if (ZS_IS_ASLEEP(uap)) return; - memcpy(&uap->termios_cache, termios, sizeof(struct termios)); + memcpy(&uap->termios_cache, termios, sizeof(struct ktermios)); /* XXX Check which revs of machines actually allow 1 and 4Mb speeds * on the IR dongle. Note that the IRTTY driver currently doesn't know @@ -1317,8 +1324,8 @@ static void __pmz_set_termios(struct uart_port *port, struct termios *termios, } /* The port lock is not held. */ -static void pmz_set_termios(struct uart_port *port, struct termios *termios, - struct termios *old) +static void pmz_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) { struct uart_pmac_port *uap = to_pmz(port); unsigned long flags; @@ -1403,8 +1410,8 @@ static struct uart_ops pmz_pops = { static int __init pmz_init_port(struct uart_pmac_port *uap) { struct device_node *np = uap->node; - char *conn; - struct slot_names_prop { + const char *conn; + const struct slot_names_prop { int count; char name[1]; } *slots; @@ -1446,22 +1453,22 @@ static int __init pmz_init_port(struct uart_pmac_port *uap) uap->flags &= ~PMACZILOG_FLAG_HAS_DMA; goto no_dma; } - uap->tx_dma_irq = np->intrs[1].line; - uap->rx_dma_irq = np->intrs[2].line; + uap->tx_dma_irq = irq_of_parse_and_map(np, 1); + uap->rx_dma_irq = irq_of_parse_and_map(np, 2); } no_dma: /* * Detect port type */ - if (device_is_compatible(np, "cobalt")) + if (of_device_is_compatible(np, "cobalt")) uap->flags |= PMACZILOG_FLAG_IS_INTMODEM; - conn = get_property(np, "AAPL,connector", &len); + conn = of_get_property(np, "AAPL,connector", &len); if (conn && (strcmp(conn, "infrared") == 0)) uap->flags |= PMACZILOG_FLAG_IS_IRDA; uap->port_type = PMAC_SCC_ASYNC; /* 1999 Powerbook G3 has slot-names property instead */ - slots = (struct slot_names_prop *)get_property(np, "slot-names", &len); + slots = of_get_property(np, "slot-names", &len); if (slots && slots->count > 0) { if (strcmp(slots->name, "IrDA") == 0) uap->flags |= PMACZILOG_FLAG_IS_IRDA; @@ -1471,9 +1478,11 @@ no_dma: if (ZS_IS_IRDA(uap)) uap->port_type = PMAC_SCC_IRDA; if (ZS_IS_INTMODEM(uap)) { - struct device_node* i2c_modem = find_devices("i2c-modem"); + struct device_node* i2c_modem = + of_find_node_by_name(NULL, "i2c-modem"); if (i2c_modem) { - char* mid = get_property(i2c_modem, "modem-id", NULL); + const char* mid = + of_get_property(i2c_modem, "modem-id", NULL); if (mid) switch(*mid) { case 0x04 : case 0x05 : @@ -1485,6 +1494,7 @@ no_dma: } printk(KERN_INFO "pmac_zilog: i2c-modem detected, id: %d\n", mid ? (*mid) : 0); + of_node_put(i2c_modem); } else { printk(KERN_INFO "pmac_zilog: serial modem detected\n"); } @@ -1493,8 +1503,8 @@ no_dma: /* * Init remaining bits of "port" structure */ - uap->port.iotype = SERIAL_IO_MEM; - uap->port.irq = np->intrs[0].line; + uap->port.iotype = UPIO_MEM; + uap->port.irq = irq_of_parse_and_map(np, 0); uap->port.uartclk = ZS_CLOCK; uap->port.fifosize = 1; uap->port.ops = &pmz_pops; @@ -1588,12 +1598,12 @@ static int pmz_suspend(struct macio_dev *mdev, pm_message_t pm_state) if (pm_state.event == mdev->ofdev.dev.power.power_state.event) return 0; - pmz_debug("suspend, switching to state %d\n", pm_state); + pmz_debug("suspend, switching to state %d\n", pm_state.event); state = pmz_uart_reg.state + uap->port.line; mutex_lock(&pmz_irq_mutex); - down(&state->sem); + mutex_lock(&state->mutex); spin_lock_irqsave(&uap->port.lock, flags); @@ -1624,7 +1634,7 @@ static int pmz_suspend(struct macio_dev *mdev, pm_message_t pm_state) /* Shut the chip down */ pmz_set_scc_power(uap, 0); - up(&state->sem); + mutex_unlock(&state->mutex); mutex_unlock(&pmz_irq_mutex); pmz_debug("suspend, switching complete\n"); @@ -1653,7 +1663,7 @@ static int pmz_resume(struct macio_dev *mdev) state = pmz_uart_reg.state + uap->port.line; mutex_lock(&pmz_irq_mutex); - down(&state->sem); + mutex_lock(&state->mutex); spin_lock_irqsave(&uap->port.lock, flags); if (!ZS_IS_OPEN(uap) && !ZS_IS_CONS(uap)) { @@ -1685,7 +1695,7 @@ static int pmz_resume(struct macio_dev *mdev) } bail: - up(&state->sem); + mutex_unlock(&state->mutex); mutex_unlock(&pmz_irq_mutex); /* Right now, we deal with delay by blocking here, I'll be @@ -1779,7 +1789,7 @@ static void pmz_console_write(struct console *con, const char *s, unsigned int c static int __init pmz_console_setup(struct console *co, char *options); static struct console pmz_console = { - .name = "ttyS", + .name = PMACZILOG_NAME, .write = pmz_console_write, .device = uart_console_device, .setup = pmz_console_setup, @@ -1803,7 +1813,6 @@ static int __init pmz_register(void) pmz_uart_reg.nr = pmz_ports_count; pmz_uart_reg.cons = PMACZILOG_CONSOLE; - pmz_uart_reg.minor = 64; /* * Register this driver with the serial core @@ -1917,6 +1926,16 @@ static void __exit exit_pmz(void) #ifdef CONFIG_SERIAL_PMACZILOG_CONSOLE +static void pmz_console_putchar(struct uart_port *port, int ch) +{ + struct uart_pmac_port *uap = (struct uart_pmac_port *)port; + + /* Wait for the transmit buffer to empty. */ + while ((read_zsreg(uap, R0) & Tx_BUF_EMP) == 0) + udelay(5); + write_zsdata(uap, ch); +} + /* * Print a string to the serial port trying not to disturb * any possible real use of the port... @@ -1925,7 +1944,6 @@ static void pmz_console_write(struct console *con, const char *s, unsigned int c { struct uart_pmac_port *uap = &pmz_ports[con->index]; unsigned long flags; - int i; if (ZS_IS_ASLEEP(uap)) return; @@ -1935,17 +1953,7 @@ static void pmz_console_write(struct console *con, const char *s, unsigned int c write_zsreg(uap, R1, uap->curregs[1] & ~TxINT_ENAB); write_zsreg(uap, R5, uap->curregs[5] | TxENABLE | RTS | DTR); - for (i = 0; i < count; i++) { - /* Wait for the transmit buffer to empty. */ - while ((read_zsreg(uap, R0) & Tx_BUF_EMP) == 0) - udelay(5); - write_zsdata(uap, s[i]); - if (s[i] == 10) { - while ((read_zsreg(uap, R0) & Tx_BUF_EMP) == 0) - udelay(5); - write_zsdata(uap, R13); - } - } + uart_console_write(&uap->port, s, count, pmz_console_putchar); /* Restore the values in the registers. */ write_zsreg(uap, R1, uap->curregs[1]);