X-Git-Url: http://ftp.safe.ca/?a=blobdiff_plain;f=drivers%2Fscsi%2Fscsi_error.c;h=eaf5a8add1ba1a9ba9e03d8aaa0969ffd41d2c58;hb=d626e3bf728c47746f2129aa00c775d4e8c2a73b;hp=1c7d993fa8ad45636967106300435afcefd3207c;hpb=8d7feac3c7504425aaf61dc7d804685a6b89ee43;p=safe%2Fjmp%2Flinux-2.6 diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c index 1c7d993..eaf5a8a 100644 --- a/drivers/scsi/scsi_error.c +++ b/drivers/scsi/scsi_error.c @@ -18,8 +18,8 @@ #include #include #include -#include #include +#include #include #include #include @@ -36,9 +36,9 @@ #include "scsi_priv.h" #include "scsi_logging.h" +#include "scsi_transport_api.h" #define SENSE_TIMEOUT (10*HZ) -#define START_UNIT_TIMEOUT (30*HZ) /* * These should *probably* be handled by the host itself. @@ -58,13 +58,35 @@ void scsi_eh_wakeup(struct Scsi_Host *shost) } /** + * scsi_schedule_eh - schedule EH for SCSI host + * @shost: SCSI host to invoke error handling on. + * + * Schedule SCSI EH without scmd. + */ +void scsi_schedule_eh(struct Scsi_Host *shost) +{ + unsigned long flags; + + spin_lock_irqsave(shost->host_lock, flags); + + if (scsi_host_set_state(shost, SHOST_RECOVERY) == 0 || + scsi_host_set_state(shost, SHOST_CANCEL_RECOVERY) == 0) { + shost->host_eh_scheduled++; + scsi_eh_wakeup(shost); + } + + spin_unlock_irqrestore(shost->host_lock, flags); +} +EXPORT_SYMBOL_GPL(scsi_schedule_eh); + +/** * scsi_eh_scmd_add - add scsi cmd to error handling. * @scmd: scmd to run eh on. * @eh_flag: optional SCSI_EH flag. * * Return value: * 0 on failure. - **/ + */ int scsi_eh_scmd_add(struct scsi_cmnd *scmd, int eh_flag) { struct Scsi_Host *shost = scmd->device->host; @@ -99,7 +121,7 @@ int scsi_eh_scmd_add(struct scsi_cmnd *scmd, int eh_flag) * This should be turned into an inline function. Each scsi command * has its own timer, and as it is added to the queue, we set up the * timer. When the command completes, we cancel the timer. - **/ + */ void scsi_add_timer(struct scsi_cmnd *scmd, int timeout, void (*complete)(struct scsi_cmnd *)) { @@ -133,7 +155,7 @@ void scsi_add_timer(struct scsi_cmnd *scmd, int timeout, * Return value: * 1 if we were able to detach the timer. 0 if we blew it, and the * timer function has already started to run. - **/ + */ int scsi_delete_timer(struct scsi_cmnd *scmd) { int rtn; @@ -159,13 +181,22 @@ int scsi_delete_timer(struct scsi_cmnd *scmd) * only in that the normal completion handling might run, but if the * normal completion function determines that the timer has already * fired, then it mustn't do anything. - **/ + */ void scsi_times_out(struct scsi_cmnd *scmd) { + enum scsi_eh_timer_return (* eh_timed_out)(struct scsi_cmnd *); + scsi_log_completion(scmd, TIMEOUT_ERROR); if (scmd->device->host->transportt->eh_timed_out) - switch (scmd->device->host->transportt->eh_timed_out(scmd)) { + eh_timed_out = scmd->device->host->transportt->eh_timed_out; + else if (scmd->device->host->hostt->eh_timed_out) + eh_timed_out = scmd->device->host->hostt->eh_timed_out; + else + eh_timed_out = NULL; + + if (eh_timed_out) + switch (eh_timed_out(scmd)) { case EH_HANDLED: __scsi_done(scmd); return; @@ -193,7 +224,7 @@ void scsi_times_out(struct scsi_cmnd *scmd) * * Return value: * 0 when dev was taken offline by error recovery. 1 OK to proceed. - **/ + */ int scsi_block_when_processing_errors(struct scsi_device *sdev) { int online; @@ -214,7 +245,7 @@ EXPORT_SYMBOL(scsi_block_when_processing_errors); * scsi_eh_prt_fail_stats - Log info on failures. * @shost: scsi host being recovered. * @work_q: Queue of scsi cmds to process. - **/ + */ static inline void scsi_eh_prt_fail_stats(struct Scsi_Host *shost, struct list_head *work_q) { @@ -264,7 +295,7 @@ static inline void scsi_eh_prt_fail_stats(struct Scsi_Host *shost, * Notes: * When a deferred error is detected the current command has * not been executed and needs retrying. - **/ + */ static int scsi_check_sense(struct scsi_cmnd *scmd) { struct scsi_sense_hdr sshdr; @@ -337,6 +368,11 @@ static int scsi_check_sense(struct scsi_cmnd *scmd) return SUCCESS; case MEDIUM_ERROR: + if (sshdr.asc == 0x11 || /* UNRECOVERED READ ERR */ + sshdr.asc == 0x13 || /* AMNF DATA FIELD */ + sshdr.asc == 0x14) { /* RECORD NOT FOUND */ + return SUCCESS; + } return NEEDS_RETRY; case HARDWARE_ERROR: @@ -362,7 +398,7 @@ static int scsi_check_sense(struct scsi_cmnd *scmd) * queued during error recovery. the main difference here is that we * don't allow for the possibility of retries here, and we are a lot * more restrictive about what we consider acceptable. - **/ + */ static int scsi_eh_completed_normally(struct scsi_cmnd *scmd) { /* @@ -416,7 +452,7 @@ static int scsi_eh_completed_normally(struct scsi_cmnd *scmd) /** * scsi_eh_done - Completion function for error handling. * @scmd: Cmd that is done. - **/ + */ static void scsi_eh_done(struct scsi_cmnd *scmd) { struct completion *eh_action; @@ -431,26 +467,279 @@ static void scsi_eh_done(struct scsi_cmnd *scmd) } /** - * scsi_send_eh_cmnd - send a cmd to a device as part of error recovery. - * @scmd: SCSI Cmd to send. - * @timeout: Timeout for cmd. + * scsi_try_host_reset - ask host adapter to reset itself + * @scmd: SCSI cmd to send hsot reset. + */ +static int scsi_try_host_reset(struct scsi_cmnd *scmd) +{ + unsigned long flags; + int rtn; + + SCSI_LOG_ERROR_RECOVERY(3, printk("%s: Snd Host RST\n", + __FUNCTION__)); + + if (!scmd->device->host->hostt->eh_host_reset_handler) + return FAILED; + + rtn = scmd->device->host->hostt->eh_host_reset_handler(scmd); + + if (rtn == SUCCESS) { + if (!scmd->device->host->hostt->skip_settle_delay) + ssleep(HOST_RESET_SETTLE_TIME); + spin_lock_irqsave(scmd->device->host->host_lock, flags); + scsi_report_bus_reset(scmd->device->host, + scmd_channel(scmd)); + spin_unlock_irqrestore(scmd->device->host->host_lock, flags); + } + + return rtn; +} + +/** + * scsi_try_bus_reset - ask host to perform a bus reset + * @scmd: SCSI cmd to send bus reset. + */ +static int scsi_try_bus_reset(struct scsi_cmnd *scmd) +{ + unsigned long flags; + int rtn; + + SCSI_LOG_ERROR_RECOVERY(3, printk("%s: Snd Bus RST\n", + __FUNCTION__)); + + if (!scmd->device->host->hostt->eh_bus_reset_handler) + return FAILED; + + rtn = scmd->device->host->hostt->eh_bus_reset_handler(scmd); + + if (rtn == SUCCESS) { + if (!scmd->device->host->hostt->skip_settle_delay) + ssleep(BUS_RESET_SETTLE_TIME); + spin_lock_irqsave(scmd->device->host->host_lock, flags); + scsi_report_bus_reset(scmd->device->host, + scmd_channel(scmd)); + spin_unlock_irqrestore(scmd->device->host->host_lock, flags); + } + + return rtn; +} + +static void __scsi_report_device_reset(struct scsi_device *sdev, void *data) +{ + sdev->was_reset = 1; + sdev->expecting_cc_ua = 1; +} + +/** + * scsi_try_target_reset - Ask host to perform a target reset + * @scmd: SCSI cmd used to send a target reset + * + * Notes: + * There is no timeout for this operation. if this operation is + * unreliable for a given host, then the host itself needs to put a + * timer on it, and set the host back to a consistent state prior to + * returning. + */ +static int scsi_try_target_reset(struct scsi_cmnd *scmd) +{ + unsigned long flags; + int rtn; + + if (!scmd->device->host->hostt->eh_target_reset_handler) + return FAILED; + + rtn = scmd->device->host->hostt->eh_target_reset_handler(scmd); + if (rtn == SUCCESS) { + spin_lock_irqsave(scmd->device->host->host_lock, flags); + __starget_for_each_device(scsi_target(scmd->device), NULL, + __scsi_report_device_reset); + spin_unlock_irqrestore(scmd->device->host->host_lock, flags); + } + + return rtn; +} + +/** + * scsi_try_bus_device_reset - Ask host to perform a BDR on a dev + * @scmd: SCSI cmd used to send BDR + * + * Notes: + * There is no timeout for this operation. if this operation is + * unreliable for a given host, then the host itself needs to put a + * timer on it, and set the host back to a consistent state prior to + * returning. + */ +static int scsi_try_bus_device_reset(struct scsi_cmnd *scmd) +{ + int rtn; + + if (!scmd->device->host->hostt->eh_device_reset_handler) + return FAILED; + + rtn = scmd->device->host->hostt->eh_device_reset_handler(scmd); + if (rtn == SUCCESS) + __scsi_report_device_reset(scmd->device, NULL); + return rtn; +} + +static int __scsi_try_to_abort_cmd(struct scsi_cmnd *scmd) +{ + if (!scmd->device->host->hostt->eh_abort_handler) + return FAILED; + + return scmd->device->host->hostt->eh_abort_handler(scmd); +} + +/** + * scsi_try_to_abort_cmd - Ask host to abort a running command. + * @scmd: SCSI cmd to abort from Lower Level. + * + * Notes: + * This function will not return until the user's completion function + * has been called. there is no timeout on this operation. if the + * author of the low-level driver wishes this operation to be timed, + * they can provide this facility themselves. helper functions in + * scsi_error.c can be supplied to make this easier to do. + */ +static int scsi_try_to_abort_cmd(struct scsi_cmnd *scmd) +{ + /* + * scsi_done was called just after the command timed out and before + * we had a chance to process it. (db) + */ + if (scmd->serial_number == 0) + return SUCCESS; + return __scsi_try_to_abort_cmd(scmd); +} + +static void scsi_abort_eh_cmnd(struct scsi_cmnd *scmd) +{ + if (__scsi_try_to_abort_cmd(scmd) != SUCCESS) + if (scsi_try_bus_device_reset(scmd) != SUCCESS) + if (scsi_try_target_reset(scmd) != SUCCESS) + if (scsi_try_bus_reset(scmd) != SUCCESS) + scsi_try_host_reset(scmd); +} + +/** + * scsi_eh_prep_cmnd - Save a scsi command info as part of error recory + * @scmd: SCSI command structure to hijack + * @ses: structure to save restore information + * @cmnd: CDB to send. Can be NULL if no new cmnd is needed + * @cmnd_size: size in bytes of @cmnd (must be <= BLK_MAX_CDB) + * @sense_bytes: size of sense data to copy. or 0 (if != 0 @cmnd is ignored) + * + * This function is used to save a scsi command information before re-execution + * as part of the error recovery process. If @sense_bytes is 0 the command + * sent must be one that does not transfer any data. If @sense_bytes != 0 + * @cmnd is ignored and this functions sets up a REQUEST_SENSE command + * and cmnd buffers to read @sense_bytes into @scmd->sense_buffer. + */ +void scsi_eh_prep_cmnd(struct scsi_cmnd *scmd, struct scsi_eh_save *ses, + unsigned char *cmnd, int cmnd_size, unsigned sense_bytes) +{ + struct scsi_device *sdev = scmd->device; + + /* + * We need saved copies of a number of fields - this is because + * error handling may need to overwrite these with different values + * to run different commands, and once error handling is complete, + * we will need to restore these values prior to running the actual + * command. + */ + ses->cmd_len = scmd->cmd_len; + ses->cmnd = scmd->cmnd; + ses->data_direction = scmd->sc_data_direction; + ses->sdb = scmd->sdb; + ses->next_rq = scmd->request->next_rq; + ses->result = scmd->result; + + scmd->cmnd = ses->eh_cmnd; + memset(scmd->cmnd, 0, BLK_MAX_CDB); + memset(&scmd->sdb, 0, sizeof(scmd->sdb)); + scmd->request->next_rq = NULL; + + if (sense_bytes) { + scmd->sdb.length = min_t(unsigned, SCSI_SENSE_BUFFERSIZE, + sense_bytes); + sg_init_one(&ses->sense_sgl, scmd->sense_buffer, + scmd->sdb.length); + scmd->sdb.table.sgl = &ses->sense_sgl; + scmd->sc_data_direction = DMA_FROM_DEVICE; + scmd->sdb.table.nents = 1; + scmd->cmnd[0] = REQUEST_SENSE; + scmd->cmnd[4] = scmd->sdb.length; + scmd->cmd_len = COMMAND_SIZE(scmd->cmnd[0]); + } else { + scmd->sc_data_direction = DMA_NONE; + if (cmnd) { + BUG_ON(cmnd_size > BLK_MAX_CDB); + memcpy(scmd->cmnd, cmnd, cmnd_size); + scmd->cmd_len = COMMAND_SIZE(scmd->cmnd[0]); + } + } + + scmd->underflow = 0; + + if (sdev->scsi_level <= SCSI_2 && sdev->scsi_level != SCSI_UNKNOWN) + scmd->cmnd[1] = (scmd->cmnd[1] & 0x1f) | + (sdev->lun << 5 & 0xe0); + + /* + * Zero the sense buffer. The scsi spec mandates that any + * untransferred sense data should be interpreted as being zero. + */ + memset(scmd->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE); +} +EXPORT_SYMBOL(scsi_eh_prep_cmnd); + +/** + * scsi_eh_restore_cmnd - Restore a scsi command info as part of error recory + * @scmd: SCSI command structure to restore + * @ses: saved information from a coresponding call to scsi_prep_eh_cmnd + * + * Undo any damage done by above scsi_prep_eh_cmnd(). + */ +void scsi_eh_restore_cmnd(struct scsi_cmnd* scmd, struct scsi_eh_save *ses) +{ + /* + * Restore original data + */ + scmd->cmd_len = ses->cmd_len; + scmd->cmnd = ses->cmnd; + scmd->sc_data_direction = ses->data_direction; + scmd->sdb = ses->sdb; + scmd->request->next_rq = ses->next_rq; + scmd->result = ses->result; +} +EXPORT_SYMBOL(scsi_eh_restore_cmnd); + +/** + * scsi_send_eh_cmnd - submit a scsi command as part of error recory + * @scmd: SCSI command structure to hijack + * @cmnd: CDB to send + * @cmnd_size: size in bytes of @cmnd + * @timeout: timeout for this request + * @sense_bytes: size of sense data to copy or 0 + * + * This function is used to send a scsi command down to a target device + * as part of the error recovery process. See also scsi_eh_prep_cmnd() above. * * Return value: * SUCCESS or FAILED or NEEDS_RETRY - **/ -static int scsi_send_eh_cmnd(struct scsi_cmnd *scmd, int timeout) + */ +static int scsi_send_eh_cmnd(struct scsi_cmnd *scmd, unsigned char *cmnd, + int cmnd_size, int timeout, unsigned sense_bytes) { struct scsi_device *sdev = scmd->device; struct Scsi_Host *shost = sdev->host; - DECLARE_COMPLETION(done); + DECLARE_COMPLETION_ONSTACK(done); unsigned long timeleft; unsigned long flags; + struct scsi_eh_save ses; int rtn; - if (sdev->scsi_level <= SCSI_2) - scmd->cmnd[1] = (scmd->cmnd[1] & 0x1f) | - (sdev->lun << 5 & 0xe0); - + scsi_eh_prep_cmnd(scmd, &ses, cmnd, cmnd_size, sense_bytes); shost->eh_action = &done; spin_lock_irqsave(shost->host_lock, flags); @@ -490,16 +779,11 @@ static int scsi_send_eh_cmnd(struct scsi_cmnd *scmd, int timeout) break; } } else { - /* - * FIXME(eric) - we are not tracking whether we could - * abort a timed out command or not. not sure how - * we should treat them differently anyways. - */ - if (shost->hostt->eh_abort_handler) - shost->hostt->eh_abort_handler(scmd); + scsi_abort_eh_cmnd(scmd); rtn = FAILED; } + scsi_eh_restore_cmnd(scmd, &ses); return rtn; } @@ -511,60 +795,10 @@ static int scsi_send_eh_cmnd(struct scsi_cmnd *scmd, int timeout) * Some hosts automatically obtain this information, others require * that we obtain it on our own. This function will *not* return until * the command either times out, or it completes. - **/ + */ static int scsi_request_sense(struct scsi_cmnd *scmd) { - static unsigned char generic_sense[6] = - {REQUEST_SENSE, 0, 0, 0, 252, 0}; - unsigned char *scsi_result; - int saved_result; - int rtn; - - memcpy(scmd->cmnd, generic_sense, sizeof(generic_sense)); - - scsi_result = kmalloc(252, GFP_ATOMIC | ((scmd->device->host->hostt->unchecked_isa_dma) ? __GFP_DMA : 0)); - - - if (unlikely(!scsi_result)) { - printk(KERN_ERR "%s: cannot allocate scsi_result.\n", - __FUNCTION__); - return FAILED; - } - - /* - * zero the sense buffer. some host adapters automatically always - * request sense, so it is not a good idea that - * scmd->request_buffer and scmd->sense_buffer point to the same - * address (db). 0 is not a valid sense code. - */ - memset(scmd->sense_buffer, 0, sizeof(scmd->sense_buffer)); - memset(scsi_result, 0, 252); - - saved_result = scmd->result; - scmd->request_buffer = scsi_result; - scmd->request_bufflen = 252; - scmd->use_sg = 0; - scmd->cmd_len = COMMAND_SIZE(scmd->cmnd[0]); - scmd->sc_data_direction = DMA_FROM_DEVICE; - scmd->underflow = 0; - - rtn = scsi_send_eh_cmnd(scmd, SENSE_TIMEOUT); - - /* last chance to have valid sense data */ - if(!SCSI_SENSE_VALID(scmd)) { - memcpy(scmd->sense_buffer, scmd->request_buffer, - sizeof(scmd->sense_buffer)); - } - - kfree(scsi_result); - - /* - * when we eventually call scsi_finish, we really wish to complete - * the original request, so let's restore the original data. (db) - */ - scsi_setup_cmd_retry(scmd); - scmd->result = saved_result; - return rtn; + return scsi_send_eh_cmnd(scmd, NULL, 0, SENSE_TIMEOUT, ~0); } /** @@ -575,20 +809,14 @@ static int scsi_request_sense(struct scsi_cmnd *scmd) * Notes: * We don't want to use the normal command completion while we are are * still handling errors - it may cause other commands to be queued, - * and that would disturb what we are doing. thus we really want to + * and that would disturb what we are doing. Thus we really want to * keep a list of pending commands for final completion, and once we * are ready to leave error handling we handle completion for real. - **/ + */ void scsi_eh_finish_cmd(struct scsi_cmnd *scmd, struct list_head *done_q) { scmd->device->host->host_failed--; scmd->eh_eflags = 0; - - /* - * set this back so that the upper level can correctly free up - * things. - */ - scsi_setup_cmd_retry(scmd); list_move_tail(&scmd->eh_entry, done_q); } EXPORT_SYMBOL(scsi_eh_finish_cmd); @@ -596,7 +824,7 @@ EXPORT_SYMBOL(scsi_eh_finish_cmd); /** * scsi_eh_get_sense - Get device sense data. * @work_q: Queue of commands to process. - * @done_q: Queue of proccessed commands.. + * @done_q: Queue of processed commands. * * Description: * See if we need to request sense information. if so, then get it @@ -604,7 +832,7 @@ EXPORT_SYMBOL(scsi_eh_finish_cmd); * * Notes: * This has the unfortunate side effect that if a shost adapter does - * not automatically request sense information, that we end up shutting + * not automatically request sense information, we end up shutting * it down before we request it. * * All drivers should request sense information internally these days, @@ -612,9 +840,9 @@ EXPORT_SYMBOL(scsi_eh_finish_cmd); * * XXX: Long term this code should go away, but that needs an audit of * all LLDDs first. - **/ -static int scsi_eh_get_sense(struct list_head *work_q, - struct list_head *done_q) + */ +int scsi_eh_get_sense(struct list_head *work_q, + struct list_head *done_q) { struct scsi_cmnd *scmd, *next; int rtn; @@ -656,98 +884,50 @@ static int scsi_eh_get_sense(struct list_head *work_q, return list_empty(work_q); } - -/** - * scsi_try_to_abort_cmd - Ask host to abort a running command. - * @scmd: SCSI cmd to abort from Lower Level. - * - * Notes: - * This function will not return until the user's completion function - * has been called. there is no timeout on this operation. if the - * author of the low-level driver wishes this operation to be timed, - * they can provide this facility themselves. helper functions in - * scsi_error.c can be supplied to make this easier to do. - **/ -static int scsi_try_to_abort_cmd(struct scsi_cmnd *scmd) -{ - if (!scmd->device->host->hostt->eh_abort_handler) - return FAILED; - - /* - * scsi_done was called just after the command timed out and before - * we had a chance to process it. (db) - */ - if (scmd->serial_number == 0) - return SUCCESS; - return scmd->device->host->hostt->eh_abort_handler(scmd); -} +EXPORT_SYMBOL_GPL(scsi_eh_get_sense); /** * scsi_eh_tur - Send TUR to device. - * @scmd: Scsi cmd to send TUR + * @scmd: &scsi_cmnd to send TUR * * Return value: * 0 - Device is ready. 1 - Device NOT ready. - **/ + */ static int scsi_eh_tur(struct scsi_cmnd *scmd) { static unsigned char tur_command[6] = {TEST_UNIT_READY, 0, 0, 0, 0, 0}; int retry_cnt = 1, rtn; - int saved_result; retry_tur: - memcpy(scmd->cmnd, tur_command, sizeof(tur_command)); - - /* - * zero the sense buffer. the scsi spec mandates that any - * untransferred sense data should be interpreted as being zero. - */ - memset(scmd->sense_buffer, 0, sizeof(scmd->sense_buffer)); - - saved_result = scmd->result; - scmd->request_buffer = NULL; - scmd->request_bufflen = 0; - scmd->use_sg = 0; - scmd->cmd_len = COMMAND_SIZE(scmd->cmnd[0]); - scmd->underflow = 0; - scmd->sc_data_direction = DMA_NONE; - - rtn = scsi_send_eh_cmnd(scmd, SENSE_TIMEOUT); + rtn = scsi_send_eh_cmnd(scmd, tur_command, 6, SENSE_TIMEOUT, 0); - /* - * when we eventually call scsi_finish, we really wish to complete - * the original request, so let's restore the original data. (db) - */ - scsi_setup_cmd_retry(scmd); - scmd->result = saved_result; - - /* - * hey, we are done. let's look to see what happened. - */ SCSI_LOG_ERROR_RECOVERY(3, printk("%s: scmd %p rtn %x\n", __FUNCTION__, scmd, rtn)); - if (rtn == SUCCESS) - return 0; - else if (rtn == NEEDS_RETRY) { + + switch (rtn) { + case NEEDS_RETRY: if (retry_cnt--) goto retry_tur; + /*FALLTHRU*/ + case SUCCESS: return 0; + default: + return 1; } - return 1; } /** - * scsi_eh_abort_cmds - abort canceled commands. - * @shost: scsi host being recovered. - * @eh_done_q: list_head for processed commands. + * scsi_eh_abort_cmds - abort pending commands. + * @work_q: &list_head for pending commands. + * @done_q: &list_head for processed commands. * * Decription: * Try and see whether or not it makes sense to try and abort the - * running command. this only works out to be the case if we have one - * command that has timed out. if the command simply failed, it makes + * running command. This only works out to be the case if we have one + * command that has timed out. If the command simply failed, it makes * no sense to try and abort the command, since as far as the shost * adapter is concerned, it isn't running. - **/ + */ static int scsi_eh_abort_cmds(struct list_head *work_q, struct list_head *done_q) { @@ -780,91 +960,40 @@ static int scsi_eh_abort_cmds(struct list_head *work_q, } /** - * scsi_try_bus_device_reset - Ask host to perform a BDR on a dev - * @scmd: SCSI cmd used to send BDR - * - * Notes: - * There is no timeout for this operation. if this operation is - * unreliable for a given host, then the host itself needs to put a - * timer on it, and set the host back to a consistent state prior to - * returning. - **/ -static int scsi_try_bus_device_reset(struct scsi_cmnd *scmd) -{ - int rtn; - - if (!scmd->device->host->hostt->eh_device_reset_handler) - return FAILED; - - rtn = scmd->device->host->hostt->eh_device_reset_handler(scmd); - if (rtn == SUCCESS) { - scmd->device->was_reset = 1; - scmd->device->expecting_cc_ua = 1; - } - - return rtn; -} - -/** * scsi_eh_try_stu - Send START_UNIT to device. - * @scmd: Scsi cmd to send START_UNIT + * @scmd: &scsi_cmnd to send START_UNIT * * Return value: * 0 - Device is ready. 1 - Device NOT ready. - **/ + */ static int scsi_eh_try_stu(struct scsi_cmnd *scmd) { static unsigned char stu_command[6] = {START_STOP, 0, 0, 0, 1, 0}; - int rtn; - int saved_result; - - if (!scmd->device->allow_restart) - return 1; - - memcpy(scmd->cmnd, stu_command, sizeof(stu_command)); - /* - * zero the sense buffer. the scsi spec mandates that any - * untransferred sense data should be interpreted as being zero. - */ - memset(scmd->sense_buffer, 0, sizeof(scmd->sense_buffer)); + if (scmd->device->allow_restart) { + int i, rtn = NEEDS_RETRY; - saved_result = scmd->result; - scmd->request_buffer = NULL; - scmd->request_bufflen = 0; - scmd->use_sg = 0; - scmd->cmd_len = COMMAND_SIZE(scmd->cmnd[0]); - scmd->underflow = 0; - scmd->sc_data_direction = DMA_NONE; + for (i = 0; rtn == NEEDS_RETRY && i < 2; i++) + rtn = scsi_send_eh_cmnd(scmd, stu_command, 6, + scmd->device->timeout, 0); - rtn = scsi_send_eh_cmnd(scmd, START_UNIT_TIMEOUT); - - /* - * when we eventually call scsi_finish, we really wish to complete - * the original request, so let's restore the original data. (db) - */ - scsi_setup_cmd_retry(scmd); - scmd->result = saved_result; + if (rtn == SUCCESS) + return 0; + } - /* - * hey, we are done. let's look to see what happened. - */ - SCSI_LOG_ERROR_RECOVERY(3, printk("%s: scmd %p rtn %x\n", - __FUNCTION__, scmd, rtn)); - if (rtn == SUCCESS) - return 0; return 1; } /** * scsi_eh_stu - send START_UNIT if needed - * @shost: scsi host being recovered. - * @eh_done_q: list_head for processed commands. + * @shost: &scsi host being recovered. + * @work_q: &list_head for pending commands. + * @done_q: &list_head for processed commands. * * Notes: * If commands are failing due to not ready, initializing command required, * try revalidating the device, which will end up sending a start unit. - **/ + */ static int scsi_eh_stu(struct Scsi_Host *shost, struct list_head *work_q, struct list_head *done_q) @@ -910,14 +1039,15 @@ static int scsi_eh_stu(struct Scsi_Host *shost, /** * scsi_eh_bus_device_reset - send bdr if needed * @shost: scsi host being recovered. - * @eh_done_q: list_head for processed commands. + * @work_q: &list_head for pending commands. + * @done_q: &list_head for processed commands. * * Notes: - * Try a bus device reset. still, look to see whether we have multiple + * Try a bus device reset. Still, look to see whether we have multiple * devices that are jammed or not - if we have multiple devices, it * makes no sense to try bus_device_reset - we really would need to try * a bus_reset instead. - **/ + */ static int scsi_eh_bus_device_reset(struct Scsi_Host *shost, struct list_head *work_q, struct list_head *done_q) @@ -964,68 +1094,61 @@ static int scsi_eh_bus_device_reset(struct Scsi_Host *shost, } /** - * scsi_try_bus_reset - ask host to perform a bus reset - * @scmd: SCSI cmd to send bus reset. - **/ -static int scsi_try_bus_reset(struct scsi_cmnd *scmd) -{ - unsigned long flags; - int rtn; - - SCSI_LOG_ERROR_RECOVERY(3, printk("%s: Snd Bus RST\n", - __FUNCTION__)); - - if (!scmd->device->host->hostt->eh_bus_reset_handler) - return FAILED; - - rtn = scmd->device->host->hostt->eh_bus_reset_handler(scmd); - - if (rtn == SUCCESS) { - if (!scmd->device->host->hostt->skip_settle_delay) - ssleep(BUS_RESET_SETTLE_TIME); - spin_lock_irqsave(scmd->device->host->host_lock, flags); - scsi_report_bus_reset(scmd->device->host, - scmd_channel(scmd)); - spin_unlock_irqrestore(scmd->device->host->host_lock, flags); - } - - return rtn; -} - -/** - * scsi_try_host_reset - ask host adapter to reset itself - * @scmd: SCSI cmd to send hsot reset. - **/ -static int scsi_try_host_reset(struct scsi_cmnd *scmd) + * scsi_eh_target_reset - send target reset if needed + * @shost: scsi host being recovered. + * @work_q: &list_head for pending commands. + * @done_q: &list_head for processed commands. + * + * Notes: + * Try a target reset. + */ +static int scsi_eh_target_reset(struct Scsi_Host *shost, + struct list_head *work_q, + struct list_head *done_q) { - unsigned long flags; + struct scsi_cmnd *scmd, *tgtr_scmd, *next; + unsigned int id; int rtn; - SCSI_LOG_ERROR_RECOVERY(3, printk("%s: Snd Host RST\n", - __FUNCTION__)); - - if (!scmd->device->host->hostt->eh_host_reset_handler) - return FAILED; - - rtn = scmd->device->host->hostt->eh_host_reset_handler(scmd); + for (id = 0; id <= shost->max_id; id++) { + tgtr_scmd = NULL; + list_for_each_entry(scmd, work_q, eh_entry) { + if (id == scmd_id(scmd)) { + tgtr_scmd = scmd; + break; + } + } + if (!tgtr_scmd) + continue; - if (rtn == SUCCESS) { - if (!scmd->device->host->hostt->skip_settle_delay) - ssleep(HOST_RESET_SETTLE_TIME); - spin_lock_irqsave(scmd->device->host->host_lock, flags); - scsi_report_bus_reset(scmd->device->host, - scmd_channel(scmd)); - spin_unlock_irqrestore(scmd->device->host->host_lock, flags); + SCSI_LOG_ERROR_RECOVERY(3, printk("%s: Sending target reset " + "to target %d\n", + current->comm, id)); + rtn = scsi_try_target_reset(tgtr_scmd); + if (rtn == SUCCESS) { + list_for_each_entry_safe(scmd, next, work_q, eh_entry) { + if (id == scmd_id(scmd)) + if (!scsi_device_online(scmd->device) || + !scsi_eh_tur(tgtr_scmd)) + scsi_eh_finish_cmd(scmd, + done_q); + } + } else + SCSI_LOG_ERROR_RECOVERY(3, printk("%s: Target reset" + " failed target: " + "%d\n", + current->comm, id)); } - return rtn; + return list_empty(work_q); } /** * scsi_eh_bus_reset - send a bus reset - * @shost: scsi host being recovered. - * @eh_done_q: list_head for processed commands. - **/ + * @shost: &scsi host being recovered. + * @work_q: &list_head for pending commands. + * @done_q: &list_head for processed commands. + */ static int scsi_eh_bus_reset(struct Scsi_Host *shost, struct list_head *work_q, struct list_head *done_q) @@ -1082,7 +1205,7 @@ static int scsi_eh_bus_reset(struct Scsi_Host *shost, * scsi_eh_host_reset - send a host reset * @work_q: list_head for processed commands. * @done_q: list_head for processed commands. - **/ + */ static int scsi_eh_host_reset(struct list_head *work_q, struct list_head *done_q) { @@ -1117,17 +1240,15 @@ static int scsi_eh_host_reset(struct list_head *work_q, * scsi_eh_offline_sdevs - offline scsi devices that fail to recover * @work_q: list_head for processed commands. * @done_q: list_head for processed commands. - * - **/ + */ static void scsi_eh_offline_sdevs(struct list_head *work_q, struct list_head *done_q) { struct scsi_cmnd *scmd, *next; list_for_each_entry_safe(scmd, next, work_q, eh_entry) { - sdev_printk(KERN_INFO, scmd->device, - "scsi: Device offlined - not" - " ready after error recovery\n"); + sdev_printk(KERN_INFO, scmd->device, "Device offlined - " + "not ready after error recovery\n"); scsi_device_set_state(scmd->device, SDEV_OFFLINE); if (scmd->eh_eflags & SCSI_EH_CANCEL_CMD) { /* @@ -1152,7 +1273,7 @@ static void scsi_eh_offline_sdevs(struct list_head *work_q, * is woken. In cases where the error code indicates an error that * doesn't require the error handler read (i.e. we don't need to * abort/reset), this function should return SUCCESS. - **/ + */ int scsi_decide_disposition(struct scsi_cmnd *scmd) { int rtn; @@ -1333,7 +1454,7 @@ int scsi_decide_disposition(struct scsi_cmnd *scmd) * * If scsi_allocate_request() fails for what ever reason, we * completely forget to lock the door. - **/ + */ static void scsi_eh_lock_door(struct scsi_device *sdev) { unsigned char cmnd[MAX_COMMAND_SIZE]; @@ -1357,7 +1478,7 @@ static void scsi_eh_lock_door(struct scsi_device *sdev) * Notes: * When we entered the error handler, we blocked all further i/o to * this device. we need to 'reverse' this process. - **/ + */ static void scsi_restart_operations(struct Scsi_Host *shost) { struct scsi_device *sdev; @@ -1401,25 +1522,27 @@ static void scsi_restart_operations(struct Scsi_Host *shost) /** * scsi_eh_ready_devs - check device ready state and recover if not. * @shost: host to be recovered. - * @eh_done_q: list_head for processed commands. - * - **/ -static void scsi_eh_ready_devs(struct Scsi_Host *shost, - struct list_head *work_q, - struct list_head *done_q) + * @work_q: &list_head for pending commands. + * @done_q: &list_head for processed commands. + */ +void scsi_eh_ready_devs(struct Scsi_Host *shost, + struct list_head *work_q, + struct list_head *done_q) { if (!scsi_eh_stu(shost, work_q, done_q)) if (!scsi_eh_bus_device_reset(shost, work_q, done_q)) - if (!scsi_eh_bus_reset(shost, work_q, done_q)) - if (!scsi_eh_host_reset(work_q, done_q)) - scsi_eh_offline_sdevs(work_q, done_q); + if (!scsi_eh_target_reset(shost, work_q, done_q)) + if (!scsi_eh_bus_reset(shost, work_q, done_q)) + if (!scsi_eh_host_reset(work_q, done_q)) + scsi_eh_offline_sdevs(work_q, + done_q); } +EXPORT_SYMBOL_GPL(scsi_eh_ready_devs); /** * scsi_eh_flush_done_q - finish processed commands or retry them. * @done_q: list_head of processed commands. - * - **/ + */ void scsi_eh_flush_done_q(struct list_head *done_q) { struct scsi_cmnd *scmd, *next; @@ -1473,7 +1596,7 @@ EXPORT_SYMBOL(scsi_eh_flush_done_q); * scsi_finish_cmd() called for it. we do all of the retry stuff * here, so when we restart the host after we return it should have an * empty queue. - **/ + */ static void scsi_unjam_host(struct Scsi_Host *shost) { unsigned long flags; @@ -1500,13 +1623,11 @@ static void scsi_unjam_host(struct Scsi_Host *shost) * Notes: * This is the main error handling loop. This is run as a kernel thread * for every SCSI host and handles all error handling activity. - **/ + */ int scsi_error_handler(void *data) { struct Scsi_Host *shost = data; - current->flags |= PF_NOFREEZE; - /* * We use TASK_INTERRUPTIBLE so that the thread is not * counted against the load average as a running process. @@ -1515,7 +1636,7 @@ int scsi_error_handler(void *data) */ set_current_state(TASK_INTERRUPTIBLE); while (!kthread_should_stop()) { - if (shost->host_failed == 0 || + if ((shost->host_failed == 0 && shost->host_eh_scheduled == 0) || shost->host_failed != shost->host_busy) { SCSI_LOG_ERROR_RECOVERY(1, printk("Error handler scsi_eh_%d sleeping\n", @@ -1584,10 +1705,8 @@ void scsi_report_bus_reset(struct Scsi_Host *shost, int channel) struct scsi_device *sdev; __shost_for_each_device(sdev, shost) { - if (channel == sdev_channel(sdev)) { - sdev->was_reset = 1; - sdev->expecting_cc_ua = 1; - } + if (channel == sdev_channel(sdev)) + __scsi_report_device_reset(sdev, NULL); } } EXPORT_SYMBOL(scsi_report_bus_reset); @@ -1620,10 +1739,8 @@ void scsi_report_device_reset(struct Scsi_Host *shost, int channel, int target) __shost_for_each_device(sdev, shost) { if (channel == sdev_channel(sdev) && - target == sdev_id(sdev)) { - sdev->was_reset = 1; - sdev->expecting_cc_ua = 1; - } + target == sdev_id(sdev)) + __scsi_report_device_reset(sdev, NULL); } } EXPORT_SYMBOL(scsi_report_device_reset); @@ -1650,20 +1767,19 @@ int scsi_reset_provider(struct scsi_device *dev, int flag) { struct scsi_cmnd *scmd = scsi_get_command(dev, GFP_KERNEL); + struct Scsi_Host *shost = dev->host; struct request req; + unsigned long flags; int rtn; + blk_rq_init(NULL, &req); scmd->request = &req; memset(&scmd->eh_timeout, 0, sizeof(scmd->eh_timeout)); - memset(&scmd->cmnd, '\0', sizeof(scmd->cmnd)); - + scmd->cmnd = req.cmd; + scmd->scsi_done = scsi_reset_provider_done_command; - scmd->done = NULL; - scmd->buffer = NULL; - scmd->bufflen = 0; - scmd->request_buffer = NULL; - scmd->request_bufflen = 0; + memset(&scmd->sdb, 0, sizeof(scmd->sdb)); scmd->cmd_len = 0; @@ -1671,11 +1787,9 @@ scsi_reset_provider(struct scsi_device *dev, int flag) init_timer(&scmd->eh_timeout); - /* - * Sometimes the command can get back into the timer chain, - * so use the pid as an identifier. - */ - scmd->pid = 0; + spin_lock_irqsave(shost->host_lock, flags); + shost->tmf_in_progress = 1; + spin_unlock_irqrestore(shost->host_lock, flags); switch (flag) { case SCSI_TRY_RESET_DEVICE: @@ -1683,6 +1797,11 @@ scsi_reset_provider(struct scsi_device *dev, int flag) if (rtn == SUCCESS) break; /* FALLTHROUGH */ + case SCSI_TRY_RESET_TARGET: + rtn = scsi_try_target_reset(scmd); + if (rtn == SUCCESS) + break; + /* FALLTHROUGH */ case SCSI_TRY_RESET_BUS: rtn = scsi_try_bus_reset(scmd); if (rtn == SUCCESS) @@ -1695,6 +1814,22 @@ scsi_reset_provider(struct scsi_device *dev, int flag) rtn = FAILED; } + spin_lock_irqsave(shost->host_lock, flags); + shost->tmf_in_progress = 0; + spin_unlock_irqrestore(shost->host_lock, flags); + + /* + * be sure to wake up anyone who was sleeping or had their queue + * suspended while we performed the TMF. + */ + SCSI_LOG_ERROR_RECOVERY(3, + printk("%s: waking up host to restart after TMF\n", + __FUNCTION__)); + + wake_up(&shost->host_wait); + + scsi_run_host_queues(shost); + scsi_next_command(scmd); return rtn; } @@ -1718,7 +1853,7 @@ EXPORT_SYMBOL(scsi_reset_provider); * * Return value: * 1 if valid sense data information found, else 0; - **/ + */ int scsi_normalize_sense(const u8 *sense_buffer, int sb_len, struct scsi_sense_hdr *sshdr) { @@ -1768,14 +1903,12 @@ int scsi_command_normalize_sense(struct scsi_cmnd *cmd, struct scsi_sense_hdr *sshdr) { return scsi_normalize_sense(cmd->sense_buffer, - sizeof(cmd->sense_buffer), sshdr); + SCSI_SENSE_BUFFERSIZE, sshdr); } EXPORT_SYMBOL(scsi_command_normalize_sense); /** - * scsi_sense_desc_find - search for a given descriptor type in - * descriptor sense data format. - * + * scsi_sense_desc_find - search for a given descriptor type in descriptor sense data format. * @sense_buffer: byte array of descriptor format sense data * @sb_len: number of valid bytes in sense_buffer * @desc_type: value of descriptor type to find @@ -1786,7 +1919,7 @@ EXPORT_SYMBOL(scsi_command_normalize_sense); * * Return value: * pointer to start of (first) descriptor if found else NULL - **/ + */ const u8 * scsi_sense_desc_find(const u8 * sense_buffer, int sb_len, int desc_type) { @@ -1814,9 +1947,7 @@ const u8 * scsi_sense_desc_find(const u8 * sense_buffer, int sb_len, EXPORT_SYMBOL(scsi_sense_desc_find); /** - * scsi_get_sense_info_fld - attempts to get information field from - * sense data (either fixed or descriptor format) - * + * scsi_get_sense_info_fld - get information field from sense data (either fixed or descriptor format) * @sense_buffer: byte array of sense data * @sb_len: number of valid bytes in sense_buffer * @info_out: pointer to 64 integer where 8 or 4 byte information @@ -1824,7 +1955,7 @@ EXPORT_SYMBOL(scsi_sense_desc_find); * * Return value: * 1 if information field found, 0 if not found. - **/ + */ int scsi_get_sense_info_fld(const u8 * sense_buffer, int sb_len, u64 * info_out) { @@ -1864,3 +1995,31 @@ int scsi_get_sense_info_fld(const u8 * sense_buffer, int sb_len, } } EXPORT_SYMBOL(scsi_get_sense_info_fld); + +/** + * scsi_build_sense_buffer - build sense data in a buffer + * @desc: Sense format (non zero == descriptor format, + * 0 == fixed format) + * @buf: Where to build sense data + * @key: Sense key + * @asc: Additional sense code + * @ascq: Additional sense code qualifier + * + **/ +void scsi_build_sense_buffer(int desc, u8 *buf, u8 key, u8 asc, u8 ascq) +{ + if (desc) { + buf[0] = 0x72; /* descriptor, current */ + buf[1] = key; + buf[2] = asc; + buf[3] = ascq; + buf[7] = 0; + } else { + buf[0] = 0x70; /* fixed, current */ + buf[2] = key; + buf[7] = 0xa; + buf[12] = asc; + buf[13] = ascq; + } +} +EXPORT_SYMBOL(scsi_build_sense_buffer);