X-Git-Url: http://ftp.safe.ca/?a=blobdiff_plain;f=drivers%2Fscsi%2Fsata_uli.c;h=a5e245c098e1a142b521975eb5d2a09364334dd7;hb=fa15b1f6be4764bfeb29b0cf74442ea6dbb2ec9d;hp=1566886815fb50465522c27e056064b680c003e7;hpb=70d374ea9907036e15574a5ce89219edd5baee10;p=safe%2Fjmp%2Flinux-2.6

diff --git a/drivers/scsi/sata_uli.c b/drivers/scsi/sata_uli.c
index 1566886..a5e245c 100644
--- a/drivers/scsi/sata_uli.c
+++ b/drivers/scsi/sata_uli.c
@@ -32,6 +32,7 @@
 #include <linux/blkdev.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
+#include <linux/device.h>
 #include "scsi.h"
 #include <scsi/scsi_host.h>
 #include <linux/libata.h>
@@ -90,7 +91,7 @@ static Scsi_Host_Template uli_sht = {
 	.ordered_flush		= 1,
 };
 
-static struct ata_port_operations uli_ops = {
+static const struct ata_port_operations uli_ops = {
 	.port_disable		= ata_port_disable,
 
 	.tf_load		= ata_tf_load,
@@ -125,8 +126,8 @@ static struct ata_port_info uli_port_info = {
 	.sht            = &uli_sht,
 	.host_flags     = ATA_FLAG_SATA | ATA_FLAG_SATA_RESET |
 			  ATA_FLAG_NO_LEGACY,
-	.pio_mask       = 0x03,		//support pio mode 4 (FIXME)
-	.udma_mask      = 0x7f,		//support udma mode 6
+	.pio_mask       = 0x1f,		/* pio0-4 */
+	.udma_mask      = 0x7f,		/* udma0-6 */
 	.port_ops       = &uli_ops,
 };
 
@@ -176,26 +177,18 @@ static void uli_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val)
 	uli_scr_cfg_write(ap, sc_reg, val);
 }
 
-/* move to PCI layer, integrate w/ MSI stuff */
-static void pci_enable_intx(struct pci_dev *pdev)
-{
-	u16 pci_command;
-
-	pci_read_config_word(pdev, PCI_COMMAND, &pci_command);
-	if (pci_command & PCI_COMMAND_INTX_DISABLE) {
-		pci_command &= ~PCI_COMMAND_INTX_DISABLE;
-		pci_write_config_word(pdev, PCI_COMMAND, pci_command);
-	}
-}
-
 static int uli_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 {
+	static int printed_version;
 	struct ata_probe_ent *probe_ent;
 	struct ata_port_info *ppi;
 	int rc;
 	unsigned int board_idx = (unsigned int) ent->driver_data;
 	int pci_dev_busy = 0;
 
+	if (!printed_version++)
+		dev_printk(KERN_INFO, &pdev->dev, "version " DRV_VERSION "\n");
+
 	rc = pci_enable_device(pdev);
 	if (rc)
 		return rc;
@@ -214,7 +207,7 @@ static int uli_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 		goto err_out_regions;
 
 	ppi = &uli_port_info;
-	probe_ent = ata_pci_init_native_mode(pdev, &ppi);
+	probe_ent = ata_pci_init_native_mode(pdev, &ppi, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY);
 	if (!probe_ent) {
 		rc = -ENOMEM;
 		goto err_out_regions;
@@ -260,7 +253,7 @@ static int uli_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 	}
 
 	pci_set_master(pdev);
-	pci_enable_intx(pdev);
+	pci_intx(pdev, 1);
 
 	/* FIXME: check ata_device_add return value */
 	ata_device_add(probe_ent);