X-Git-Url: http://ftp.safe.ca/?a=blobdiff_plain;f=drivers%2Fscsi%2FKconfig;h=4e0322b1c1ea07301f180621912cd785d8882402;hb=4b89258c7320bab4155b692e76ae9ffdd85e79be;hp=aac9cd9a172f0c5f57eb21fede3e95596cd28d8f;hpb=5bc65793cbf8da0d35f19ef025dda22887e79e80;p=safe%2Fjmp%2Flinux-2.6 diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index aac9cd9..4e0322b 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -10,6 +10,7 @@ config RAID_ATTRS config SCSI tristate "SCSI device support" depends on BLOCK + select SCSI_DMA if HAS_DMA ---help--- If you want to use a SCSI hard disk, SCSI tape drive, SCSI CD-ROM or any other SCSI device under Linux, say Y and make sure that you know @@ -29,6 +30,10 @@ config SCSI However, do not compile this as a module if your root file system (the one containing the directory /) is located on a SCSI device. +config SCSI_DMA + bool + default n + config SCSI_TGT tristate "SCSI target support" depends on SCSI && EXPERIMENTAL @@ -58,8 +63,10 @@ comment "SCSI support type (disk, tape, CD-ROM)" config BLK_DEV_SD tristate "SCSI disk support" depends on SCSI + select CRC_T10DIF if BLK_DEV_INTEGRITY ---help--- If you want to use SCSI hard disks, Fibre Channel disks, + Serial ATA (SATA) or Parallel ATA (PATA) hard disks, USB storage or the SCSI or parallel port version of the IOMEGA ZIP drive, say Y and read the SCSI-HOWTO, the Disk-HOWTO and the Multi-Disk-HOWTO, available from @@ -166,14 +173,22 @@ config CHR_DEV_SCH don't need this for those tiny 6-slot cdrom changers. Media changers are listed as "Type: Medium Changer" in /proc/scsi/scsi. If you have such hardware and want to use it with linux, say Y - here. Check for details. + here. Check for details. If you want to compile this as a module ( = code which can be inserted in and removed from the running kernel whenever you want), say M here and read and - . The module will be called ch.o. + . The module will be called ch.o. If unsure, say N. - + +config SCSI_ENCLOSURE + tristate "SCSI Enclosure Support" + depends on SCSI && ENCLOSURE_SERVICES + help + Enclosures are devices sitting on or in SCSI backplanes that + manage devices. If you have a disk cage, the chances are that + it has an enclosure device. Selecting this option will just allow + certain enclosure conditions to be reported and is not required. comment "Some SCSI devices (e.g. CD jukebox) support multiple LUNs" depends on SCSI @@ -266,6 +281,13 @@ config SCSI_FC_ATTRS each attached FiberChannel device to sysfs, say Y. Otherwise, say N. +config SCSI_FC_TGT_ATTRS + bool "SCSI target support for FiberChannel Transport Attributes" + depends on SCSI_FC_ATTRS + depends on SCSI_TGT = y || SCSI_TGT = SCSI_FC_ATTRS + help + If you want to use SCSI target mode drivers enable this option. + config SCSI_ISCSI_ATTRS tristate "iSCSI Transport Attributes" depends on SCSI && NET @@ -276,17 +298,35 @@ config SCSI_ISCSI_ATTRS config SCSI_SAS_ATTRS tristate "SAS Transport Attributes" - depends on SCSI + depends on SCSI && BLK_DEV_BSG help If you wish to export transport-specific information about each attached SAS device to sysfs, say Y. source "drivers/scsi/libsas/Kconfig" +config SCSI_SRP_ATTRS + tristate "SRP Transport Attributes" + depends on SCSI + help + If you wish to export transport-specific information about + each attached SRP device to sysfs, say Y. + +config SCSI_SRP_TGT_ATTRS + bool "SCSI target support for SRP Transport Attributes" + depends on SCSI_SRP_ATTRS + depends on SCSI_TGT = y || SCSI_TGT = SCSI_SRP_ATTRS + help + If you want to use SCSI target mode drivers enable this option. + endmenu -menu "SCSI low-level drivers" +menuconfig SCSI_LOWLEVEL + bool "SCSI low-level drivers" depends on SCSI!=n + default y + +if SCSI_LOWLEVEL && SCSI config ISCSI_TCP tristate "iSCSI Initiator over TCP/IP" @@ -310,26 +350,15 @@ config ISCSI_TCP The userspace component needed to initialize the driver, documentation, and sample configuration files can be found here: - http://linux-iscsi.sf.net + http://open-iscsi.org config SGIWD93_SCSI tristate "SGI WD93C93 SCSI Driver" - depends on SGI_IP22 && SCSI + depends on SGI_HAS_WD93 && SCSI help If you have a Western Digital WD93 SCSI controller on an SGI MIPS system, say Y. Otherwise, say N. -config SCSI_DECNCR - tristate "DEC NCR53C94 Scsi Driver" - depends on MACH_DECSTATION && SCSI && TC - help - Say Y here to support the NCR53C94 SCSI controller chips on IOASIC - based TURBOchannel DECstations and TURBOchannel PMAZ-A cards. - -config SCSI_DECSII - tristate "DEC SII Scsi Driver" - depends on MACH_DECSTATION && SCSI && 32BIT - config BLK_DEV_3W_XXXX_RAID tristate "3ware 5/6/7/8xxx ATA-RAID support" depends on PCI && SCSI @@ -357,6 +386,7 @@ config SCSI_3W_9XXX config SCSI_7000FASST tristate "7000FASST SCSI support" depends on ISA && SCSI && ISA_DMA_API + select CHECK_SIGNATURE help This driver supports the Western Digital 7000 SCSI host adapter family. Some information is in the source: @@ -378,6 +408,7 @@ config SCSI_AHA152X tristate "Adaptec AHA152X/2825 support" depends on ISA && SCSI && !64BIT select SCSI_SPI_ATTRS + select CHECK_SIGNATURE ---help--- This is a driver for the AHA-1510, AHA-1520, AHA-1522, and AHA-2825 SCSI host adapters. It also works for the AVA-1505, but the IRQ etc. @@ -474,10 +505,9 @@ config SCSI_AIC7XXX_OLD source "drivers/scsi/aic7xxx/Kconfig.aic79xx" source "drivers/scsi/aic94xx/Kconfig" -# All the I2O code and drivers do not seem to be 64bit safe. config SCSI_DPT_I2O tristate "Adaptec I2O RAID support " - depends on !64BIT && SCSI && PCI + depends on SCSI && PCI && VIRT_TO_BUS help This driver supports all of Adaptec's I2O based RAID controllers as well as the DPT SmartRaid V cards. This is an Adaptec maintained @@ -488,9 +518,8 @@ config SCSI_DPT_I2O config SCSI_ADVANSYS tristate "AdvanSys SCSI support" - depends on SCSI + depends on SCSI && VIRT_TO_BUS depends on ISA || EISA || PCI - depends on BROKEN || X86_32 help This is a driver for all SCSI host adapters manufactured by AdvanSys. It is documented in the kernel source in @@ -512,26 +541,39 @@ config SCSI_IN2000 module will be called in2000. config SCSI_ARCMSR - tristate "ARECA ARC11X0[PCI-X]/ARC12X0[PCI-EXPRESS] SATA-RAID support" + tristate "ARECA (ARC11xx/12xx/13xx/16xx) SATA/SAS RAID Host Adapter" depends on PCI && SCSI help - This driver supports all of ARECA's SATA RAID controller cards. + This driver supports all of ARECA's SATA/SAS RAID controller cards. This is an ARECA-maintained driver by Erich Chen. - If you have any problems, please mail to: < erich@areca.com.tw > + If you have any problems, please mail to: . Areca supports Linux RAID config tools. - - < http://www.areca.com.tw > + Please link To compile this driver as a module, choose M here: the module will be called arcmsr (modprobe arcmsr). +config SCSI_ARCMSR_AER + bool "Enable PCI Error Recovery Capability in Areca Driver(ARCMSR)" + depends on SCSI_ARCMSR && PCIEAER + default n + help + The advanced error reporting(AER) capability is "NOT" provided by + ARC1200/1201/1202 SATA RAID controllers cards. + If your card is one of ARC1200/1201/1202, please use the default setting, n. + If your card is other models, you could pick it + on condition that the kernel version is greater than 2.6.19. + This function is maintained driver by Nick Cheng. If you have any + problems or suggestion, you are welcome to contact with . + To enable this function, choose Y here. + source "drivers/scsi/megaraid/Kconfig.megaraid" config SCSI_HPTIOP - tristate "HighPoint RocketRAID 3xxx Controller support" + tristate "HighPoint RocketRAID 3xxx/4xxx Controller support" depends on SCSI && PCI help - This option enables support for HighPoint RocketRAID 3xxx + This option enables support for HighPoint RocketRAID 3xxx/4xxx controllers. To compile this driver as a module, choose M here; the module @@ -539,25 +581,27 @@ config SCSI_HPTIOP config SCSI_BUSLOGIC tristate "BusLogic SCSI support" - depends on (PCI || ISA || MCA) && SCSI && ISA_DMA_API + depends on (PCI || ISA || MCA) && SCSI && ISA_DMA_API && VIRT_TO_BUS ---help--- This is support for BusLogic MultiMaster and FlashPoint SCSI Host Adapters. Consult the SCSI-HOWTO, available from , and the files and for more information. + Note that support for FlashPoint is only available for 32-bit + x86 configurations. To compile this driver as a module, choose M here: the module will be called BusLogic. -config SCSI_OMIT_FLASHPOINT - bool "Omit FlashPoint support" - depends on SCSI_BUSLOGIC +config SCSI_FLASHPOINT + bool "FlashPoint support" + depends on SCSI_BUSLOGIC && PCI && X86_32 help - This option allows you to omit the FlashPoint support from the + This option allows you to add FlashPoint support to the BusLogic SCSI driver. The FlashPoint SCCB Manager code is - substantial, so users of MultiMaster Host Adapters may wish to omit - it. + substantial, so users of MultiMaster Host Adapters may not + wish to include it. config SCSI_DMX3191D tristate "DMX3191D SCSI support" @@ -573,6 +617,7 @@ config SCSI_DTC3280 tristate "DTC3180/3280 SCSI support" depends on ISA && SCSI select SCSI_SPI_ATTRS + select CHECK_SIGNATURE help This is support for DTC 3180/3280 SCSI Host Adapters. Please read the SCSI-HOWTO, available from @@ -647,6 +692,7 @@ config SCSI_EATA_PIO config SCSI_FUTURE_DOMAIN tristate "Future Domain 16xx SCSI/AHA-2920A support" depends on (ISA || PCI) && SCSI + select CHECK_SIGNATURE ---help--- This is support for Future Domain's 16-bit SCSI host adapters (TMC-1660/1680, TMC-1650/1670, TMC-3260, TMC-1610M/MER/MEX) and @@ -685,7 +731,7 @@ config SCSI_GDTH This is a driver for RAID/SCSI Disk Array Controllers (EISA/ISA/PCI) manufactured by Intel Corporation/ICP vortex GmbH. It is documented in the kernel source in and - + . To compile this driver as a module, choose M here: the module will be called gdth. @@ -822,6 +868,7 @@ config SCSI_IPS config SCSI_IBMVSCSI tristate "IBM Virtual SCSI support" depends on PPC_PSERIES || PPC_ISERIES + select SCSI_SRP_ATTRS help This is the IBM POWER Virtual SCSI Client @@ -830,7 +877,7 @@ config SCSI_IBMVSCSI config SCSI_IBMVSCSIS tristate "IBM Virtual SCSI Server support" - depends on PPC_PSERIES && SCSI_TGT && SCSI_SRP + depends on PPC_PSERIES && SCSI_SRP && SCSI_SRP_TGT_ATTRS help This is the SRP target driver for IBM pSeries virtual environments. @@ -842,6 +889,25 @@ config SCSI_IBMVSCSIS To compile this driver as a module, choose M here: the module will be called ibmvstgt. +config SCSI_IBMVFC + tristate "IBM Virtual FC support" + depends on PPC_PSERIES && SCSI + select SCSI_FC_ATTRS + help + This is the IBM POWER Virtual FC Client + + To compile this driver as a module, choose M here: the + module will be called ibmvfc. + +config SCSI_IBMVFC_TRACE + bool "enable driver internal trace" + depends on SCSI_IBMVFC + default y + help + If you say Y here, the driver will trace all commands issued + to the adapter. Performance impact is minimal. Trace can be + dumped using /sys/class/scsi_host/hostXX/trace. + config SCSI_INITIO tristate "Initio 9100U(W) support" depends on PCI && SCSI @@ -947,6 +1013,16 @@ config SCSI_IZIP_SLOW_CTR Generally, saying N is fine. +config SCSI_MVSAS + tristate "Marvell 88SE6440 SAS/SATA support" + depends on PCI && SCSI + select SCSI_SAS_LIBSAS + help + This driver supports Marvell SAS/SATA PCI devices. + + To compiler this driver as a module, choose M here: the module + will be called mvsas. + config SCSI_NCR53C406A tristate "NCR53c406a SCSI support" depends on ISA && SCSI @@ -1006,6 +1082,11 @@ config SCSI_STEX To compile this driver as a module, choose M here: the module will be called stex. +config 53C700_BE_BUS + bool + depends on SCSI_A4000T || SCSI_ZORRO7XX || MVME16x_SCSI || BVME6000_SCSI + default y + config SCSI_SYM53C8XX_2 tristate "SYM53C8XX Version 2 SCSI support" depends on PCI && SCSI @@ -1210,17 +1291,6 @@ config SCSI_NCR53C8XX_NO_DISCONNECT not allow targets to disconnect is not reasonable if there is more than 1 device on a SCSI bus. The normal answer therefore is N. -config SCSI_MCA_53C9X - tristate "NCR MCA 53C9x SCSI support" - depends on MCA_LEGACY && SCSI && BROKEN_ON_SMP - help - Some MicroChannel machines, notably the NCR 35xx line, use a SCSI - controller based on the NCR 53C94. This driver will allow use of - the controller on the 3550, and very possibly others. - - To compile this driver as a module, choose M here: the - module will be called mca_53c9x. - config SCSI_PAS16 tristate "PAS16 SCSI support" depends on ISA && SCSI @@ -1235,17 +1305,6 @@ config SCSI_PAS16 To compile this driver as a module, choose M here: the module will be called pas16. -config SCSI_PSI240I - tristate "PSI240i support" - depends on ISA && SCSI - help - This is support for the PSI240i EIDE interface card which acts as a - SCSI host adapter. Please read the SCSI-HOWTO, available from - . - - To compile this driver as a module, choose M here: the - module will be called psi240i. - config SCSI_QLOGIC_FAS tristate "Qlogic FAS SCSI support" depends on ISA && SCSI @@ -1306,20 +1365,6 @@ config SCSI_LPFC This lpfc driver supports the Emulex LightPulse Family of Fibre Channel PCI host adapters. -config SCSI_SEAGATE - tristate "Seagate ST-02 and Future Domain TMC-8xx SCSI support" - depends on X86 && ISA && SCSI - ---help--- - These are 8-bit SCSI controllers; the ST-01 is also supported by - this driver. It is explained in section 3.9 of the SCSI-HOWTO, - available from . If it - doesn't work out of the box, you may have to change some macros at - compiletime, which are described in . - - To compile this driver as a module, choose M here: the - module will be called seagate. - -# definitely looks not 64bit safe: config SCSI_SIM710 tristate "Simple 53c710 SCSI support (Compaq, NCR machines)" depends on (EISA || MCA) && SCSI @@ -1382,6 +1427,7 @@ config SCSI_T128 tristate "Trantor T128/T128F/T228 SCSI support" depends on ISA && SCSI select SCSI_SPI_ATTRS + select CHECK_SIGNATURE ---help--- This is support for a SCSI host adapter. It is explained in section 3.11 of the SCSI-HOWTO, available from @@ -1532,6 +1578,7 @@ source "drivers/scsi/arm/Kconfig" config JAZZ_ESP bool "MIPS JAZZ FAS216 SCSI support" depends on MACH_JAZZ && SCSI + select SCSI_SPI_ATTRS help This is the driver for the onboard SCSI host adapter of MIPS Magnum 4000, Acer PICA, Olivetti M700-10 and a few other identical OEM @@ -1545,7 +1592,7 @@ config A3000_SCSI built-in SCSI controller, say Y. Otherwise, say N. To compile this driver as a module, choose M here: the - module will be called wd33c93. + module will be called a3000. config A2091_SCSI tristate "A2091/A590 WD33C93A support" @@ -1555,7 +1602,7 @@ config A2091_SCSI say N. To compile this driver as a module, choose M here: the - module will be called wd33c93. + module will be called a2091. config GVP11_SCSI tristate "GVP Series II WD33C93A support" @@ -1570,52 +1617,25 @@ config GVP11_SCSI To compile this driver as a module, choose M here: the module will be called gvp11. -config CYBERSTORM_SCSI - tristate "CyberStorm SCSI support" - depends on ZORRO && SCSI - help - If you have an Amiga with an original (MkI) Phase5 Cyberstorm - accelerator board and the optional Cyberstorm SCSI controller, - answer Y. Otherwise, say N. - -config CYBERSTORMII_SCSI - tristate "CyberStorm Mk II SCSI support" - depends on ZORRO && SCSI - help - If you have an Amiga with a Phase5 Cyberstorm MkII accelerator board - and the optional Cyberstorm SCSI controller, say Y. Otherwise, - answer N. - -config BLZ2060_SCSI - tristate "Blizzard 2060 SCSI support" - depends on ZORRO && SCSI - help - If you have an Amiga with a Phase5 Blizzard 2060 accelerator board - and want to use the onboard SCSI controller, say Y. Otherwise, - answer N. - -config BLZ1230_SCSI - tristate "Blizzard 1230IV/1260 SCSI support" - depends on ZORRO && SCSI +config SCSI_A4000T + tristate "A4000T NCR53c710 SCSI support (EXPERIMENTAL)" + depends on AMIGA && SCSI && EXPERIMENTAL + select SCSI_SPI_ATTRS help - If you have an Amiga 1200 with a Phase5 Blizzard 1230IV or Blizzard - 1260 accelerator, and the optional SCSI module, say Y. Otherwise, - say N. + If you have an Amiga 4000T and have SCSI devices connected to the + built-in SCSI controller, say Y. Otherwise, say N. -config FASTLANE_SCSI - tristate "Fastlane SCSI support" - depends on ZORRO && SCSI - help - If you have the Phase5 Fastlane Z3 SCSI controller, or plan to use - one in the near future, say Y to this question. Otherwise, say N. + To compile this driver as a module, choose M here: the + module will be called a4000t. -config SCSI_AMIGA7XX - bool "Amiga NCR53c710 SCSI support (EXPERIMENTAL)" - depends on AMIGA && SCSI && EXPERIMENTAL && BROKEN +config SCSI_ZORRO7XX + tristate "Zorro NCR53c710 SCSI support (EXPERIMENTAL)" + depends on ZORRO && SCSI && EXPERIMENTAL + select SCSI_SPI_ATTRS help - Support for various NCR53c710-based SCSI controllers on the Amiga. + Support for various NCR53c710-based SCSI controllers on Zorro + expansion boards for the Amiga. This includes: - - the builtin SCSI controller on the Amiga 4000T, - the Amiga 4091 Zorro III SCSI-2 controller, - the MacroSystem Development's WarpEngine Amiga SCSI-2 controller (info at @@ -1623,19 +1643,6 @@ config SCSI_AMIGA7XX - the SCSI controller on the Phase5 Blizzard PowerUP 603e+ accelerator card for the Amiga 1200, - the SCSI controller on the GVP Turbo 040/060 accelerator. - Note that all of the above SCSI controllers, except for the builtin - SCSI controller on the Amiga 4000T, reside on the Zorro expansion - bus, so you also have to enable Zorro bus support if you want to use - them. - -config OKTAGON_SCSI - tristate "BSC Oktagon SCSI support (EXPERIMENTAL)" - depends on ZORRO && SCSI && EXPERIMENTAL - help - If you have the BSC Oktagon SCSI disk controller for the Amiga, say - Y to this question. If you're in doubt about whether you have one, - see the picture at - . config ATARI_SCSI tristate "Atari native SCSI support" @@ -1692,14 +1699,13 @@ config MAC_SCSI config SCSI_MAC_ESP tristate "Macintosh NCR53c9[46] SCSI" depends on MAC && SCSI + select SCSI_SPI_ATTRS help This is the NCR 53c9x SCSI controller found on most of the 68040 - based Macintoshes. If you have one of these say Y and read the - SCSI-HOWTO, available from - . + based Macintoshes. - To compile this driver as a module, choose M here: the - module will be called mac_esp. + To compile this driver as a module, choose M here: the module + will be called mac_esp. config MVME147_SCSI bool "WD33C93 SCSI driver for MVME147" @@ -1710,8 +1716,8 @@ config MVME147_SCSI single-board computer. config MVME16x_SCSI - bool "NCR53C710 SCSI driver for MVME16x" - depends on MVME16x && SCSI && BROKEN + tristate "NCR53C710 SCSI driver for MVME16x" + depends on MVME16x && SCSI select SCSI_SPI_ATTRS help The Motorola MVME162, 166, 167, 172 and 177 boards use the NCR53C710 @@ -1719,22 +1725,14 @@ config MVME16x_SCSI will want to say Y to this question. config BVME6000_SCSI - bool "NCR53C710 SCSI driver for BVME6000" - depends on BVME6000 && SCSI && BROKEN + tristate "NCR53C710 SCSI driver for BVME6000" + depends on BVME6000 && SCSI select SCSI_SPI_ATTRS help The BVME4000 and BVME6000 boards from BVM Ltd use the NCR53C710 SCSI controller chip. Almost everyone using one of these boards will want to say Y to this question. -config SCSI_NCR53C7xx_FAST - bool "allow FAST-SCSI [10MHz]" - depends on SCSI_AMIGA7XX || MVME16x_SCSI || BVME6000_SCSI - help - This will enable 10MHz FAST-SCSI transfers with your host - adapter. Some systems have problems with that speed, so it's safest - to say N here. - config SUN3_SCSI tristate "Sun3 NCR5380 SCSI" depends on SUN3 && SCSI @@ -1749,6 +1747,7 @@ config SUN3_SCSI config SUN3X_ESP bool "Sun3x ESP SCSI" depends on SUN3X && SCSI=y + select SCSI_SPI_ATTRS help The ESP was an on-board SCSI controller used on Sun 3/80 machines. Say Y here to compile in support for it. @@ -1756,14 +1755,15 @@ config SUN3X_ESP config SCSI_SUNESP tristate "Sparc ESP Scsi Driver" depends on SBUS && SCSI + select SCSI_SPI_ATTRS help This is the driver for the Sun ESP SCSI host adapter. The ESP - chipset is present in most SPARC SBUS-based computers. + chipset is present in most SPARC SBUS-based computers and + supports the Emulex family of ESP SCSI chips (esp100, esp100A, + esp236, fas101, fas236) as well as the Qlogic fas366 SCSI chip. To compile this driver as a module, choose M here: the - module will be called esp. - -# bool 'Cyberstorm Mk III SCSI support (EXPERIMENTAL)' CONFIG_CYBERSTORMIII_SCSI + module will be called sun_esp. config ZFCP tristate "FCP host bus adapter driver for IBM eServer zSeries" @@ -1789,8 +1789,10 @@ config SCSI_SRP To compile this driver as a module, choose M here: the module will be called libsrp. -endmenu +endif # SCSI_LOWLEVEL source "drivers/scsi/pcmcia/Kconfig" +source "drivers/scsi/device_handler/Kconfig" + endmenu