X-Git-Url: http://ftp.safe.ca/?a=blobdiff_plain;f=drivers%2Fscsi%2FKconfig;h=4cd280e86966cfe9957a41ab1bdd12cf76223242;hb=8d3ee2cb0ab59f78fdc801ede7db15ef47387bd0;hp=c8c606589ea635d12b47d9d96b78e3d98300394c;hpb=5a25ba1677ab8d63890016a8c1bca68a3e0fbc7d;p=safe%2Fjmp%2Flinux-2.6 diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index c8c6065..4cd280e 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -3,11 +3,13 @@ menu "SCSI device support" config RAID_ATTRS tristate "RAID Transport Class" default n + depends on BLOCK ---help--- Provides RAID config SCSI tristate "SCSI device support" + depends on BLOCK ---help--- If you want to use a SCSI hard disk, SCSI tape drive, SCSI CD-ROM or any other SCSI device under Linux, say Y and make sure that you know @@ -27,16 +29,28 @@ config SCSI However, do not compile this as a module if your root file system (the one containing the directory /) is located on a SCSI device. +config SCSI_TGT + tristate "SCSI target support" + depends on SCSI && EXPERIMENTAL + ---help--- + If you want to use SCSI target mode drivers enable this option. + If you choose M, the module will be called scsi_tgt. + +config SCSI_NETLINK + bool + default n + select NET + config SCSI_PROC_FS bool "legacy /proc/scsi/ support" depends on SCSI && PROC_FS default y ---help--- This option enables support for the various files in - /proc/scsi. In Linux 2.6 this has been superceeded by + /proc/scsi. In Linux 2.6 this has been superseded by files in sysfs but many legacy applications rely on this. - If unusure say Y. + If unsure say Y. comment "SCSI support type (disk, tape, CD-ROM)" depends on SCSI @@ -78,7 +92,7 @@ config CHR_DEV_OSST tristate "SCSI OnStream SC-x0 tape support" depends on SCSI ---help--- - The OnStream SC-x0 SCSI tape drives can not be driven by the + The OnStream SC-x0 SCSI tape drives cannot be driven by the standard st driver, but instead need this special osst driver and use the /dev/osstX char device nodes (major 206). Via usb-storage and ide-scsi, you may be able to drive the USB-x0 and DI-x0 drives @@ -209,6 +223,24 @@ config SCSI_LOGGING there should be no noticeable performance impact as long as you have logging turned off. +config SCSI_SCAN_ASYNC + bool "Asynchronous SCSI scanning" + depends on SCSI + help + The SCSI subsystem can probe for devices while the rest of the + system continues booting, and even probe devices on different + busses in parallel, leading to a significant speed-up. + + If you have built SCSI as modules, enabling this option can + be a problem as the devices may not have been found by the + time your system expects them to have been. You can load the + scsi_wait_scan module to ensure that all scans have completed. + If you build your SCSI drivers into the kernel, then everything + will work fine if you say Y here. + + You can override this choice by specifying "scsi_mod.scan=sync" + or async on the kernel's command line. + menu "SCSI Transports" depends on SCSI @@ -222,6 +254,7 @@ config SCSI_SPI_ATTRS config SCSI_FC_ATTRS tristate "FiberChannel Transport Attributes" depends on SCSI + select SCSI_NETLINK help If you wish to export transport-specific information about each attached FiberChannel device to sysfs, say Y. @@ -488,67 +521,6 @@ config SCSI_ARCMSR source "drivers/scsi/megaraid/Kconfig.megaraid" -config SCSI_SATA - tristate "Serial ATA (SATA) support" - depends on SCSI - help - This driver family supports Serial ATA host controllers - and devices. - - If unsure, say N. - -config SCSI_SATA_AHCI - tristate "AHCI SATA support" - depends on SCSI_SATA && PCI - help - This option enables support for AHCI Serial ATA. - - If unsure, say N. - -config SCSI_SATA_SVW - tristate "ServerWorks Frodo / Apple K2 SATA support" - depends on SCSI_SATA && PCI - help - This option enables support for Broadcom/Serverworks/Apple K2 - SATA support. - - If unsure, say N. - -config SCSI_ATA_PIIX - tristate "Intel PIIX/ICH SATA support" - depends on SCSI_SATA && PCI - help - This option enables support for ICH5/6/7/8 Serial ATA. - If PATA support was enabled previously, this enables - support for select Intel PIIX/ICH PATA host controllers. - - If unsure, say N. - -config SCSI_SATA_MV - tristate "Marvell SATA support (HIGHLY EXPERIMENTAL)" - depends on SCSI_SATA && PCI && EXPERIMENTAL - help - This option enables support for the Marvell Serial ATA family. - Currently supports 88SX[56]0[48][01] chips. - - If unsure, say N. - -config SCSI_SATA_NV - tristate "NVIDIA SATA support" - depends on SCSI_SATA && PCI && EXPERIMENTAL - help - This option enables support for NVIDIA Serial ATA. - - If unsure, say N. - -config SCSI_PDC_ADMA - tristate "Pacific Digital ADMA support" - depends on SCSI_SATA && PCI - help - This option enables support for Pacific Digital ADMA controllers - - If unsure, say N. - config SCSI_HPTIOP tristate "HighPoint RocketRAID 3xxx Controller support" depends on SCSI && PCI @@ -559,83 +531,6 @@ config SCSI_HPTIOP To compile this driver as a module, choose M here; the module will be called hptiop. If unsure, say N. -config SCSI_SATA_QSTOR - tristate "Pacific Digital SATA QStor support" - depends on SCSI_SATA && PCI - help - This option enables support for Pacific Digital Serial ATA QStor. - - If unsure, say N. - -config SCSI_SATA_PROMISE - tristate "Promise SATA TX2/TX4 support" - depends on SCSI_SATA && PCI - help - This option enables support for Promise Serial ATA TX2/TX4. - - If unsure, say N. - -config SCSI_SATA_SX4 - tristate "Promise SATA SX4 support" - depends on SCSI_SATA && PCI && EXPERIMENTAL - help - This option enables support for Promise Serial ATA SX4. - - If unsure, say N. - -config SCSI_SATA_SIL - tristate "Silicon Image SATA support" - depends on SCSI_SATA && PCI && EXPERIMENTAL - help - This option enables support for Silicon Image Serial ATA. - - If unsure, say N. - -config SCSI_SATA_SIL24 - tristate "Silicon Image 3124/3132 SATA support" - depends on SCSI_SATA && PCI && EXPERIMENTAL - help - This option enables support for Silicon Image 3124/3132 Serial ATA. - - If unsure, say N. - -config SCSI_SATA_SIS - tristate "SiS 964/180 SATA support" - depends on SCSI_SATA && PCI && EXPERIMENTAL - help - This option enables support for SiS Serial ATA 964/180. - - If unsure, say N. - -config SCSI_SATA_ULI - tristate "ULi Electronics SATA support" - depends on SCSI_SATA && PCI && EXPERIMENTAL - help - This option enables support for ULi Electronics SATA. - - If unsure, say N. - -config SCSI_SATA_VIA - tristate "VIA SATA support" - depends on SCSI_SATA && PCI - help - This option enables support for VIA Serial ATA. - - If unsure, say N. - -config SCSI_SATA_VITESSE - tristate "VITESSE VSC-7174 / INTEL 31244 SATA support" - depends on SCSI_SATA && PCI - help - This option enables support for Vitesse VSC7174 and Intel 31244 Serial ATA. - - If unsure, say N. - -config SCSI_SATA_INTEL_COMBINED - bool - depends on IDE=y && !BLK_DEV_IDE_SATA && (SCSI_SATA_AHCI || SCSI_ATA_PIIX) - default y - config SCSI_BUSLOGIC tristate "BusLogic SCSI support" depends on (PCI || ISA || MCA) && SCSI && ISA_DMA_API @@ -927,6 +822,20 @@ config SCSI_IBMVSCSI To compile this driver as a module, choose M here: the module will be called ibmvscsic. +config SCSI_IBMVSCSIS + tristate "IBM Virtual SCSI Server support" + depends on PPC_PSERIES && SCSI_TGT && SCSI_SRP + help + This is the SRP target driver for IBM pSeries virtual environments. + + The userspace component needed to initialize the driver and + documentation can be found: + + http://stgt.berlios.de/ + + To compile this driver as a module, choose M here: the + module will be called ibmvstgt. + config SCSI_INITIO tristate "Initio 9100U(W) support" depends on PCI && SCSI @@ -1065,6 +974,15 @@ config SCSI_LASI700 many PA-RISC workstations & servers. If you do not know whether you have a Lasi chip, it is safe to say "Y" here. +config SCSI_SNI_53C710 + tristate "SNI RM SCSI support for 53c710" + depends on SNI_RM && SCSI + select SCSI_SPI_ATTRS + select 53C700_LE_ON_BE + help + This is a driver for the onboard SCSI controller found in older + SNI RM workstations & servers. + config 53C700_LE_ON_BE bool depends on SCSI_LASI700 @@ -1074,8 +992,13 @@ config SCSI_STEX tristate "Promise SuperTrak EX Series support" depends on PCI && SCSI ---help--- - This driver supports Promise SuperTrak EX8350/8300/16350/16300 - Storage controllers. + This driver supports Promise SuperTrak EX series storage controllers. + + Promise provides Linux RAID configuration utility for these + controllers. Please visit to download. + + To compile this driver as a module, choose M here: the + module will be called stex. config SCSI_SYM53C8XX_2 tristate "SYM53C8XX Version 2 SCSI support" @@ -1146,7 +1069,7 @@ config SCSI_SYM53C8XX_MMIO config SCSI_IPR tristate "IBM Power Linux RAID adapter support" - depends on PCI && SCSI + depends on PCI && SCSI && ATA select FW_LOADER ---help--- This driver supports the IBM Power Linux family RAID adapters. @@ -1156,6 +1079,7 @@ config SCSI_IPR config SCSI_IPR_TRACE bool "enable driver internal trace" depends on SCSI_IPR + default y help If you say Y here, the driver will trace all commands issued to the adapter. Performance impact is minimal. Trace can be @@ -1164,6 +1088,7 @@ config SCSI_IPR_TRACE config SCSI_IPR_DUMP bool "enable adapter dump support" depends on SCSI_IPR + default y help If you say Y here, the driver will support adapter crash dump. If you enable this support, the iprdump daemon can be used @@ -1376,6 +1301,7 @@ config SCSI_QLOGICPTI module will be called qlogicpti. source "drivers/scsi/qla2xxx/Kconfig" +source "drivers/scsi/qla4xxx/Kconfig" config SCSI_LPFC tristate "Emulex LightPulse Fibre Channel Support" @@ -1387,13 +1313,13 @@ config SCSI_LPFC config SCSI_SEAGATE tristate "Seagate ST-02 and Future Domain TMC-8xx SCSI support" - depends on X86 && ISA && SCSI && BROKEN + depends on X86 && ISA && SCSI ---help--- These are 8-bit SCSI controllers; the ST-01 is also supported by this driver. It is explained in section 3.9 of the SCSI-HOWTO, available from . If it - doesn't work out of the box, you may have to change some settings in - . + doesn't work out of the box, you may have to change some macros at + compiletime, which are described in . To compile this driver as a module, choose M here: the module will be called seagate. @@ -1821,7 +1747,7 @@ config SCSI_NCR53C7xx_FAST config SUN3_SCSI tristate "Sun3 NCR5380 SCSI" - depends on SUN3 && SCSI && BROKEN + depends on SUN3 && SCSI select SCSI_SPI_ATTRS help This option will enable support for the OBIO (onboard io) NCR5380 @@ -1863,6 +1789,16 @@ config ZFCP called zfcp. If you want to compile it as a module, say M here and read . +config SCSI_SRP + tristate "SCSI RDMA Protocol helper library" + depends on SCSI && PCI + select SCSI_TGT + help + If you wish to use SRP target drivers, say Y. + + To compile this driver as a module, choose M here: the + module will be called libsrp. + endmenu source "drivers/scsi/pcmcia/Kconfig"