X-Git-Url: http://ftp.safe.ca/?a=blobdiff_plain;f=drivers%2Frtc%2FKconfig;h=73771b09fbd37dd0ab2a757ecb317ec818501c78;hb=bd207cfb0011389d55827b3f3181c60e8c3c7148;hp=09d5cd33a3f6fbe0d8780d2af7d11029ba73dd99;hpb=a216685818a54b4f15235068b53908f954850251;p=safe%2Fjmp%2Flinux-2.6

diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 09d5cd3..73771b0 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -225,11 +225,11 @@ config RTC_DRV_PCF8583
 	  will be called rtc-pcf8583.
 
 config RTC_DRV_M41T80
-	tristate "ST M41T65/M41T80/81/82/83/84/85/87"
+	tristate "ST M41T62/65/M41T80/81/82/83/84/85/87"
 	help
 	  If you say Y here you will get support for the ST M41T60
 	  and M41T80 RTC chips series. Currently, the following chips are
-	  supported: M41T65, M41T80, M41T81, M41T82, M41T83, M41ST84,
+	  supported: M41T62, M41T65, M41T80, M41T81, M41T82, M41T83, M41ST84,
 	  M41ST85, and M41ST87.
 
 	  This driver can also be built as a module. If so, the module
@@ -296,6 +296,15 @@ config RTC_DRV_RX8581
 	  This driver can also be built as a module. If so the module
 	  will be called rtc-rx8581.
 
+config RTC_DRV_RX8025
+	tristate "Epson RX-8025SA/NB"
+	help
+	  If you say yes here you get support for the Epson
+	  RX-8025SA/NB RTC chips.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-rx8025.
+
 endif # I2C
 
 comment "SPI RTC drivers"
@@ -509,6 +518,16 @@ config RTC_DRV_V3020
 	  This driver can also be built as a module. If so, the module
 	  will be called rtc-v3020.
 
+config RTC_DRV_WM831X
+	tristate "Wolfson Microelectronics WM831x RTC"
+	depends on MFD_WM831X
+	help
+	  If you say yes here you will get support for the RTC subsystem
+	  of the Wolfson Microelectronics WM831X series PMICs.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called "rtc-wm831x".
+
 config RTC_DRV_WM8350
 	tristate "Wolfson Microelectronics WM8350 RTC"
 	depends on MFD_WM8350
@@ -526,6 +545,15 @@ config RTC_DRV_PCF50633
 	  If you say yes here you get support for the RTC subsystem of the
 	  NXP PCF50633 used in embedded systems.
 
+config RTC_DRV_AB3100
+	tristate "ST-Ericsson AB3100 RTC"
+	depends on AB3100_CORE
+	default y if AB3100_CORE
+	help
+	  Select this to enable the ST-Ericsson AB3100 Mixed Signal IC RTC
+	  support. This chip contains a battery- and capacitor-backed RTC.
+
+
 comment "on-CPU RTC drivers"
 
 config RTC_DRV_OMAP
@@ -573,7 +601,7 @@ config RTC_DRV_SA1100
 
 config RTC_DRV_SH
 	tristate "SuperH On-Chip RTC"
-	depends on RTC_CLASS && SUPERH
+	depends on RTC_CLASS && SUPERH && HAVE_CLK
 	help
 	  Say Y here to enable support for the on-chip RTC found in
 	  most SuperH processors.
@@ -688,22 +716,16 @@ config RTC_DRV_RS5C313
 	help
 	  If you say yes here you get support for the Ricoh RS5C313 RTC chips.
 
-config RTC_DRV_PARISC
-	tristate "PA-RISC firmware RTC support"
-	depends on PARISC
+config RTC_DRV_GENERIC
+	tristate "Generic RTC support"
+	# Please consider writing a new RTC driver instead of using the generic
+	# RTC abstraction
+	depends on PARISC || M68K || PPC || SUPERH32
 	help
-	  Say Y or M here to enable RTC support on PA-RISC systems using
-	  firmware calls. If you do not know what you are doing, you should
+	  Say Y or M here to enable RTC support on systems using the generic
+	  RTC abstraction. If you do not know what you are doing, you should
 	  just say Y.
 
-config RTC_DRV_PPC
-       tristate "PowerPC machine dependent RTC support"
-       depends on PPC
-       help
-	 The PowerPC kernel has machine-specific functions for accessing
-	 the RTC. This exposes that functionality through the generic RTC
-	 class.
-
 config RTC_DRV_PXA
        tristate "PXA27x/PXA3xx"
        depends on ARCH_PXA
@@ -747,4 +769,13 @@ config RTC_DRV_MV
 	  This driver can also be built as a module. If so, the module
 	  will be called rtc-mv.
 
+config RTC_DRV_PS3
+	tristate "PS3 RTC"
+	depends on PPC_PS3
+	help
+	  If you say yes here you will get support for the RTC on PS3.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-ps3.
+
 endif # RTC_CLASS