X-Git-Url: http://ftp.safe.ca/?a=blobdiff_plain;f=drivers%2Frtc%2FKconfig;h=10ba12c8c5e004a044c59ec7a77a91f58cf8f61e;hb=1703a6d3c38944731ba23594843a704d828266f3;hp=fa66d10dd5a009746c29eed10fee0bc109435fcf;hpb=bcd68a70cb0eee556d86d93133aa150319bd9f53;p=safe%2Fjmp%2Flinux-2.6

diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index fa66d10..10ba12c 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -175,6 +175,16 @@ config RTC_DRV_MAX6900
 	  This driver can also be built as a module. If so, the module
 	  will be called rtc-max6900.
 
+config RTC_DRV_MAX8925
+	tristate "Maxim MAX8925"
+	depends on MFD_MAX8925
+	help
+	  If you say yes here you will get support for the
+	  RTC of Maxim MAX8925 PMIC.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-max8925.
+
 config RTC_DRV_RS5C372
 	tristate "Ricoh R2025S/D, RS5C372A/B, RV5C386, RV5C387A"
 	help
@@ -225,11 +235,11 @@ config RTC_DRV_PCF8583
 	  will be called rtc-pcf8583.
 
 config RTC_DRV_M41T80
-	tristate "ST M41T65/M41T80/81/82/83/84/85/87"
+	tristate "ST M41T62/65/M41T80/81/82/83/84/85/87"
 	help
 	  If you say Y here you will get support for the ST M41T60
 	  and M41T80 RTC chips series. Currently, the following chips are
-	  supported: M41T65, M41T80, M41T81, M41T82, M41T83, M41ST84,
+	  supported: M41T62, M41T65, M41T80, M41T81, M41T82, M41T83, M41ST84,
 	  M41ST85, and M41ST87.
 
 	  This driver can also be built as a module. If so, the module
@@ -242,6 +252,15 @@ config RTC_DRV_M41T80_WDT
 	  If you say Y here you will get support for the
 	  watchdog timer in the ST M41T60 and M41T80 RTC chips series.
 
+config RTC_DRV_BQ32K
+	tristate "TI BQ32000"
+	help
+	  If you say Y here you will get support for the TI
+	  BQ32000 I2C RTC chip.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-bq32k.
+
 config RTC_DRV_DM355EVM
 	tristate "TI DaVinci DM355 EVM RTC"
 	depends on MFD_DM355EVM_MSP
@@ -258,14 +277,14 @@ config RTC_DRV_TWL92330
 	  the Menelaus driver; it's not separate module.
 
 config RTC_DRV_TWL4030
-	tristate "TI TWL4030/TWL5030/TPS659x0"
+	tristate "TI TWL4030/TWL5030/TWL6030/TPS659x0"
 	depends on RTC_CLASS && TWL4030_CORE
 	help
 	  If you say yes here you get support for the RTC on the
-	  TWL4030 family chips, used mostly with OMAP3 platforms.
+	  TWL4030/TWL5030/TWL6030 family chips, used mostly with OMAP3 platforms.
 
 	  This driver can also be built as a module. If so, the module
-	  will be called rtc-twl4030.
+	  will be called rtc-twl.
 
 config RTC_DRV_S35390A
 	tristate "Seiko Instruments S-35390A"
@@ -296,6 +315,15 @@ config RTC_DRV_RX8581
 	  This driver can also be built as a module. If so the module
 	  will be called rtc-rx8581.
 
+config RTC_DRV_RX8025
+	tristate "Epson RX-8025SA/NB"
+	help
+	  If you say yes here you get support for the Epson
+	  RX-8025SA/NB RTC chips.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-rx8025.
+
 endif # I2C
 
 comment "SPI RTC drivers"
@@ -369,6 +397,15 @@ config RTC_DRV_DS3234
 	  This driver can also be built as a module. If so, the module
 	  will be called rtc-ds3234.
 
+config RTC_DRV_PCF2123
+	tristate "NXP PCF2123"
+	help
+	  If you say yes here you get support for the NXP PCF2123
+	  RTC chip.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-pcf2123.
+
 endif # SPI_MASTER
 
 comment "Platform RTC drivers"
@@ -491,6 +528,26 @@ config RTC_DRV_M48T59
 	  This driver can also be built as a module, if so, the module
 	  will be called "rtc-m48t59".
 
+config RTC_DRV_MSM6242
+	tristate "Oki MSM6242"
+	help
+	  If you say yes here you get support for the Oki MSM6242
+	  timekeeping chip. It is used in some Amiga models (e.g. A2000).
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-msm6242.
+
+config RTC_MXC
+	tristate "Freescale MXC Real Time Clock"
+	depends on ARCH_MXC
+	depends on RTC_CLASS
+	help
+	   If you say yes here you get support for the Freescale MXC
+	   RTC module.
+
+	   This driver can also be built as a module, if so, the module
+	   will be called "rtc-mxc".
+
 config RTC_DRV_BQ4802
 	tristate "TI BQ4802"
 	help
@@ -500,6 +557,16 @@ config RTC_DRV_BQ4802
 	  This driver can also be built as a module. If so, the module
 	  will be called rtc-bq4802.
 
+config RTC_DRV_RP5C01
+	tristate "Ricoh RP5C01"
+	help
+	  If you say yes here you get support for the Ricoh RP5C01
+	  timekeeping chip. It is used in some Amiga models (e.g. A3000
+	  and A4000).
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-rp5c01.
+
 config RTC_DRV_V3020
 	tristate "EM Microelectronic V3020"
 	help
@@ -509,6 +576,16 @@ config RTC_DRV_V3020
 	  This driver can also be built as a module. If so, the module
 	  will be called rtc-v3020.
 
+config RTC_DRV_WM831X
+	tristate "Wolfson Microelectronics WM831x RTC"
+	depends on MFD_WM831X
+	help
+	  If you say yes here you will get support for the RTC subsystem
+	  of the Wolfson Microelectronics WM831X series PMICs.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called "rtc-wm831x".
+
 config RTC_DRV_WM8350
 	tristate "Wolfson Microelectronics WM8350 RTC"
 	depends on MFD_WM8350
@@ -526,18 +603,51 @@ config RTC_DRV_PCF50633
 	  If you say yes here you get support for the RTC subsystem of the
 	  NXP PCF50633 used in embedded systems.
 
+config RTC_DRV_AB3100
+	tristate "ST-Ericsson AB3100 RTC"
+	depends on AB3100_CORE
+	default y if AB3100_CORE
+	help
+	  Select this to enable the ST-Ericsson AB3100 Mixed Signal IC RTC
+	  support. This chip contains a battery- and capacitor-backed RTC.
+
+config RTC_DRV_AB8500
+	tristate "ST-Ericsson AB8500 RTC"
+	depends on AB8500_CORE
+	help
+	  Select this to enable the ST-Ericsson AB8500 power management IC RTC
+	  support. This chip contains a battery- and capacitor-backed RTC.
+
+config RTC_DRV_NUC900
+	tristate "NUC910/NUC920 RTC driver"
+	depends on RTC_CLASS && ARCH_W90X900
+	help
+	  If you say yes here you get support for the RTC subsystem of the
+	  NUC910/NUC920 used in embedded systems.
+
 comment "on-CPU RTC drivers"
 
+config RTC_DRV_DAVINCI
+	tristate "TI DaVinci RTC"
+	depends on ARCH_DAVINCI_DM365
+	help
+	  If you say yes here you get support for the RTC on the
+	  DaVinci platforms (DM365).
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-davinci.
+
 config RTC_DRV_OMAP
 	tristate "TI OMAP1"
-	depends on ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730
+	depends on ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730 || ARCH_DAVINCI_DA8XX
 	help
-	  Say "yes" here to support the real time clock on TI OMAP1 chips.
-	  This driver can also be built as a module called rtc-omap.
+	  Say "yes" here to support the real time clock on TI OMAP1 and
+	  DA8xx/OMAP-L13x chips.  This driver can also be built as a
+	  module called rtc-omap.
 
 config RTC_DRV_S3C
 	tristate "Samsung S3C series SoC RTC"
-	depends on ARCH_S3C2410
+	depends on ARCH_S3C2410 || ARCH_S3C64XX
 	help
 	  RTC (Realtime Clock) driver for the clock inbuilt into the
 	  Samsung S3C24XX series of SoCs. This can provide periodic
@@ -573,7 +683,7 @@ config RTC_DRV_SA1100
 
 config RTC_DRV_SH
 	tristate "SuperH On-Chip RTC"
-	depends on RTC_CLASS && SUPERH
+	depends on RTC_CLASS && SUPERH && HAVE_CLK
 	help
 	  Say Y here to enable support for the on-chip RTC found in
 	  most SuperH processors.
@@ -692,7 +802,7 @@ config RTC_DRV_GENERIC
 	tristate "Generic RTC support"
 	# Please consider writing a new RTC driver instead of using the generic
 	# RTC abstraction
-	depends on PARISC || M68K || PPC
+	depends on PARISC || M68K || PPC || SUPERH32
 	help
 	  Say Y or M here to enable RTC support on systems using the generic
 	  RTC abstraction. If you do not know what you are doing, you should
@@ -732,7 +842,7 @@ config RTC_DRV_TX4939
 
 config RTC_DRV_MV
 	tristate "Marvell SoC RTC"
-	depends on ARCH_KIRKWOOD
+	depends on ARCH_KIRKWOOD || ARCH_DOVE
 	help
 	  If you say yes here you will get support for the in-chip RTC
 	  that can be found in some of Marvell's SoC devices, such as
@@ -741,4 +851,58 @@ config RTC_DRV_MV
 	  This driver can also be built as a module. If so, the module
 	  will be called rtc-mv.
 
+config RTC_DRV_PS3
+	tristate "PS3 RTC"
+	depends on PPC_PS3
+	help
+	  If you say yes here you will get support for the RTC on PS3.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-ps3.
+
+config RTC_DRV_COH901331
+	tristate "ST-Ericsson COH 901 331 RTC"
+	depends on ARCH_U300
+	help
+	  If you say Y here you will get access to ST-Ericsson
+	  COH 901 331 RTC clock found in some ST-Ericsson Mobile
+	  Platforms.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called "rtc-coh901331".
+
+
+config RTC_DRV_STMP
+	tristate "Freescale STMP3xxx RTC"
+	depends on ARCH_STMP3XXX
+	help
+	  If you say yes here you will get support for the onboard
+	  STMP3xxx RTC.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-stmp3xxx.
+
+config RTC_DRV_PCAP
+	tristate "PCAP RTC"
+	depends on EZX_PCAP
+	help
+	  If you say Y here you will get support for the RTC found on
+	  the PCAP2 ASIC used on some Motorola phones.
+
+config RTC_DRV_MC13783
+	depends on MFD_MC13783
+	tristate "Freescale MC13783 RTC"
+	help
+	  This enables support for the Freescale MC13783 PMIC RTC
+
+config RTC_DRV_MPC5121
+	tristate "Freescale MPC5121 built-in RTC"
+	depends on PPC_MPC512x && RTC_CLASS
+	help
+	  If you say yes here you will get support for the
+	  built-in RTC MPC5121.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-mpc5121.
+
 endif # RTC_CLASS