X-Git-Url: http://ftp.safe.ca/?a=blobdiff_plain;f=drivers%2Fnet%2Fwireless%2Frt2x00%2Frt2500usb.c;h=9ae96a626e6d0fafc6b8a633af03c75a135c5b3d;hb=6fe70aae0d128339febfabc073ba4c4a03de4f45;hp=22dd6d9e29812b60d4326ff5324e4e8dd1a2ffb7;hpb=4789666e13fb0b2d45feb1b4a5119a1b997ec84c;p=safe%2Fjmp%2Flinux-2.6 diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c index 22dd6d9..9ae96a6 100644 --- a/drivers/net/wireless/rt2x00/rt2500usb.c +++ b/drivers/net/wireless/rt2x00/rt2500usb.c @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2009 rt2x00 SourceForge Project + Copyright (C) 2004 - 2009 Ivo van Doorn This program is free software; you can redistribute it and/or modify @@ -29,6 +29,7 @@ #include #include #include +#include #include #include "rt2x00.h" @@ -368,7 +369,7 @@ static int rt2500usb_config_key(struct rt2x00_dev *rt2x00dev, /* * The encryption key doesn't fit within the CSR cache, - * this means we should allocate it seperately and use + * this means we should allocate it separately and use * rt2x00usb_vendor_request() to send the key to the hardware. */ reg = KEY_ENTRY(key->hw_key_idx); @@ -382,7 +383,7 @@ static int rt2500usb_config_key(struct rt2x00_dev *rt2x00dev, /* * The driver does not support the IV/EIV generation * in hardware. However it demands the data to be provided - * both seperately as well as inside the frame. + * both separately as well as inside the frame. * We already provided the CONFIG_CRYPTO_COPY_IV to rt2x00lib * to ensure rt2x00lib will not strip the data from the * frame after the copy, now we must tell mac80211 @@ -565,8 +566,7 @@ static void rt2500usb_config_ant(struct rt2x00_dev *rt2x00dev, /* * RT2525E and RT5222 need to flip TX I/Q */ - if (rt2x00_rf(&rt2x00dev->chip, RF2525E) || - rt2x00_rf(&rt2x00dev->chip, RF5222)) { + if (rt2x00_rf(rt2x00dev, RF2525E) || rt2x00_rf(rt2x00dev, RF5222)) { rt2x00_set_field8(&r2, BBP_R2_TX_IQ_FLIP, 1); rt2x00_set_field16(&csr5, PHY_CSR5_CCK_FLIP, 1); rt2x00_set_field16(&csr6, PHY_CSR6_OFDM_FLIP, 1); @@ -574,7 +574,7 @@ static void rt2500usb_config_ant(struct rt2x00_dev *rt2x00dev, /* * RT2525E does not need RX I/Q Flip. */ - if (rt2x00_rf(&rt2x00dev->chip, RF2525E)) + if (rt2x00_rf(rt2x00dev, RF2525E)) rt2x00_set_field8(&r14, BBP_R14_RX_IQ_FLIP, 0); } else { rt2x00_set_field16(&csr5, PHY_CSR5_CCK_FLIP, 0); @@ -598,7 +598,7 @@ static void rt2500usb_config_channel(struct rt2x00_dev *rt2x00dev, /* * For RT2525E we should first set the channel to half band higher. */ - if (rt2x00_rf(&rt2x00dev->chip, RF2525E)) { + if (rt2x00_rf(rt2x00dev, RF2525E)) { static const u32 vals[] = { 0x000008aa, 0x000008ae, 0x000008ae, 0x000008b2, 0x000008b2, 0x000008b6, 0x000008b6, 0x000008ba, @@ -649,6 +649,10 @@ static void rt2500usb_config_ps(struct rt2x00_dev *rt2x00dev, rt2x00_set_field16(®, MAC_CSR18_AUTO_WAKE, 1); rt2500usb_register_write(rt2x00dev, MAC_CSR18, reg); + } else { + rt2500usb_register_read(rt2x00dev, MAC_CSR18, ®); + rt2x00_set_field16(®, MAC_CSR18_AUTO_WAKE, 0); + rt2500usb_register_write(rt2x00dev, MAC_CSR18, reg); } rt2x00dev->ops->lib->set_device_state(rt2x00dev, state); @@ -716,139 +720,6 @@ static void rt2500usb_reset_tuner(struct rt2x00_dev *rt2x00dev, } /* - * NOTE: This function is directly ported from legacy driver, but - * despite it being declared it was never called. Although link tuning - * sounds like a good idea, and usually works well for the other drivers, - * it does _not_ work with rt2500usb. Enabling this function will result - * in TX capabilities only until association kicks in. Immediately - * after the successful association all TX frames will be kept in the - * hardware queue and never transmitted. - */ -#if 0 -static void rt2500usb_link_tuner(struct rt2x00_dev *rt2x00dev) -{ - int rssi = rt2x00_get_link_rssi(&rt2x00dev->link); - u16 bbp_thresh; - u16 vgc_bound; - u16 sens; - u16 r24; - u16 r25; - u16 r61; - u16 r17_sens; - u8 r17; - u8 up_bound; - u8 low_bound; - - /* - * Read current r17 value, as well as the sensitivity values - * for the r17 register. - */ - rt2500usb_bbp_read(rt2x00dev, 17, &r17); - rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R17, &r17_sens); - - rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_VGC, &vgc_bound); - up_bound = rt2x00_get_field16(vgc_bound, EEPROM_BBPTUNE_VGCUPPER); - low_bound = rt2x00_get_field16(vgc_bound, EEPROM_BBPTUNE_VGCLOWER); - - /* - * If we are not associated, we should go straight to the - * dynamic CCA tuning. - */ - if (!rt2x00dev->intf_associated) - goto dynamic_cca_tune; - - /* - * Determine the BBP tuning threshold and correctly - * set BBP 24, 25 and 61. - */ - rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE, &bbp_thresh); - bbp_thresh = rt2x00_get_field16(bbp_thresh, EEPROM_BBPTUNE_THRESHOLD); - - rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R24, &r24); - rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R25, &r25); - rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R61, &r61); - - if ((rssi + bbp_thresh) > 0) { - r24 = rt2x00_get_field16(r24, EEPROM_BBPTUNE_R24_HIGH); - r25 = rt2x00_get_field16(r25, EEPROM_BBPTUNE_R25_HIGH); - r61 = rt2x00_get_field16(r61, EEPROM_BBPTUNE_R61_HIGH); - } else { - r24 = rt2x00_get_field16(r24, EEPROM_BBPTUNE_R24_LOW); - r25 = rt2x00_get_field16(r25, EEPROM_BBPTUNE_R25_LOW); - r61 = rt2x00_get_field16(r61, EEPROM_BBPTUNE_R61_LOW); - } - - rt2500usb_bbp_write(rt2x00dev, 24, r24); - rt2500usb_bbp_write(rt2x00dev, 25, r25); - rt2500usb_bbp_write(rt2x00dev, 61, r61); - - /* - * A too low RSSI will cause too much false CCA which will - * then corrupt the R17 tuning. To remidy this the tuning should - * be stopped (While making sure the R17 value will not exceed limits) - */ - if (rssi >= -40) { - if (r17 != 0x60) - rt2500usb_bbp_write(rt2x00dev, 17, 0x60); - return; - } - - /* - * Special big-R17 for short distance - */ - if (rssi >= -58) { - sens = rt2x00_get_field16(r17_sens, EEPROM_BBPTUNE_R17_LOW); - if (r17 != sens) - rt2500usb_bbp_write(rt2x00dev, 17, sens); - return; - } - - /* - * Special mid-R17 for middle distance - */ - if (rssi >= -74) { - sens = rt2x00_get_field16(r17_sens, EEPROM_BBPTUNE_R17_HIGH); - if (r17 != sens) - rt2500usb_bbp_write(rt2x00dev, 17, sens); - return; - } - - /* - * Leave short or middle distance condition, restore r17 - * to the dynamic tuning range. - */ - low_bound = 0x32; - if (rssi < -77) - up_bound -= (-77 - rssi); - - if (up_bound < low_bound) - up_bound = low_bound; - - if (r17 > up_bound) { - rt2500usb_bbp_write(rt2x00dev, 17, up_bound); - rt2x00dev->link.vgc_level = up_bound; - return; - } - -dynamic_cca_tune: - - /* - * R17 is inside the dynamic tuning range, - * start tuning the link based on the false cca counter. - */ - if (rt2x00dev->link.qual.false_cca > 512 && r17 < up_bound) { - rt2500usb_bbp_write(rt2x00dev, 17, ++r17); - rt2x00dev->link.vgc_level = r17; - } else if (rt2x00dev->link.qual.false_cca < 100 && r17 > low_bound) { - rt2500usb_bbp_write(rt2x00dev, 17, --r17); - rt2x00dev->link.vgc_level = r17; - } -} -#else -#define rt2500usb_link_tuner NULL -#endif - -/* * Initialization functions. */ static int rt2500usb_init_registers(struct rt2x00_dev *rt2x00dev) @@ -926,7 +797,7 @@ static int rt2500usb_init_registers(struct rt2x00_dev *rt2x00dev) rt2x00_set_field16(®, MAC_CSR1_HOST_READY, 1); rt2500usb_register_write(rt2x00dev, MAC_CSR1, reg); - if (rt2x00_rev(&rt2x00dev->chip) >= RT2570_VERSION_C) { + if (rt2x00_rev(rt2x00dev) >= RT2570_VERSION_C) { rt2500usb_register_read(rt2x00dev, PHY_CSR2, ®); rt2x00_set_field16(®, PHY_CSR2_LNA, 0); } else { @@ -1163,12 +1034,30 @@ static void rt2500usb_write_tx_desc(struct rt2x00_dev *rt2x00dev, struct txentry_desc *txdesc) { struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb); - __le32 *txd = skbdesc->desc; + __le32 *txd = (__le32 *)(skb->data - TXD_DESC_SIZE); u32 word; /* * Start writing the descriptor words. */ + rt2x00_desc_read(txd, 0, &word); + rt2x00_set_field32(&word, TXD_W0_RETRY_LIMIT, txdesc->retry_limit); + rt2x00_set_field32(&word, TXD_W0_MORE_FRAG, + test_bit(ENTRY_TXD_MORE_FRAG, &txdesc->flags)); + rt2x00_set_field32(&word, TXD_W0_ACK, + test_bit(ENTRY_TXD_ACK, &txdesc->flags)); + rt2x00_set_field32(&word, TXD_W0_TIMESTAMP, + test_bit(ENTRY_TXD_REQ_TIMESTAMP, &txdesc->flags)); + rt2x00_set_field32(&word, TXD_W0_OFDM, + (txdesc->rate_mode == RATE_MODE_OFDM)); + rt2x00_set_field32(&word, TXD_W0_NEW_SEQ, + test_bit(ENTRY_TXD_FIRST_FRAGMENT, &txdesc->flags)); + rt2x00_set_field32(&word, TXD_W0_IFS, txdesc->ifs); + rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, txdesc->length); + rt2x00_set_field32(&word, TXD_W0_CIPHER, !!txdesc->cipher); + rt2x00_set_field32(&word, TXD_W0_KEY_ID, txdesc->key_idx); + rt2x00_desc_write(txd, 0, word); + rt2x00_desc_read(txd, 1, &word); rt2x00_set_field32(&word, TXD_W1_IV_OFFSET, txdesc->iv_offset); rt2x00_set_field32(&word, TXD_W1_AIFS, txdesc->aifs); @@ -1188,23 +1077,11 @@ static void rt2500usb_write_tx_desc(struct rt2x00_dev *rt2x00dev, _rt2x00_desc_write(txd, 4, skbdesc->iv[1]); } - rt2x00_desc_read(txd, 0, &word); - rt2x00_set_field32(&word, TXD_W0_RETRY_LIMIT, txdesc->retry_limit); - rt2x00_set_field32(&word, TXD_W0_MORE_FRAG, - test_bit(ENTRY_TXD_MORE_FRAG, &txdesc->flags)); - rt2x00_set_field32(&word, TXD_W0_ACK, - test_bit(ENTRY_TXD_ACK, &txdesc->flags)); - rt2x00_set_field32(&word, TXD_W0_TIMESTAMP, - test_bit(ENTRY_TXD_REQ_TIMESTAMP, &txdesc->flags)); - rt2x00_set_field32(&word, TXD_W0_OFDM, - (txdesc->rate_mode == RATE_MODE_OFDM)); - rt2x00_set_field32(&word, TXD_W0_NEW_SEQ, - test_bit(ENTRY_TXD_FIRST_FRAGMENT, &txdesc->flags)); - rt2x00_set_field32(&word, TXD_W0_IFS, txdesc->ifs); - rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, skb->len); - rt2x00_set_field32(&word, TXD_W0_CIPHER, !!txdesc->cipher); - rt2x00_set_field32(&word, TXD_W0_KEY_ID, txdesc->key_idx); - rt2x00_desc_write(txd, 0, word); + /* + * Register descriptor details in skb frame descriptor. + */ + skbdesc->desc = txd; + skbdesc->desc_len = TXD_DESC_SIZE; } /* @@ -1212,22 +1089,15 @@ static void rt2500usb_write_tx_desc(struct rt2x00_dev *rt2x00dev, */ static void rt2500usb_beacondone(struct urb *urb); -static void rt2500usb_write_beacon(struct queue_entry *entry) +static void rt2500usb_write_beacon(struct queue_entry *entry, + struct txentry_desc *txdesc) { struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; struct usb_device *usb_dev = to_usb_device_intf(rt2x00dev->dev); struct queue_entry_priv_usb_bcn *bcn_priv = entry->priv_data; - struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); int pipe = usb_sndbulkpipe(usb_dev, entry->queue->usb_endpoint); int length; - u16 reg; - - /* - * Add the descriptor in front of the skb. - */ - skb_push(entry->skb, entry->queue->desc_size); - memcpy(entry->skb->data, skbdesc->desc, skbdesc->desc_len); - skbdesc->desc = entry->skb->data; + u16 reg, reg0; /* * Disable beaconing while we are reloading the beacon data, @@ -1238,6 +1108,11 @@ static void rt2500usb_write_beacon(struct queue_entry *entry) rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg); /* + * Take the descriptor in front of the skb into account. + */ + skb_push(entry->skb, TXD_DESC_SIZE); + + /* * USB devices cannot blindly pass the skb->len as the * length of the data to usb_fill_bulk_urb. Pass the skb * to the driver to determine what the length should be. @@ -1262,6 +1137,26 @@ static void rt2500usb_write_beacon(struct queue_entry *entry) * Send out the guardian byte. */ usb_submit_urb(bcn_priv->guardian_urb, GFP_ATOMIC); + + /* + * Enable beaconing again. + */ + rt2x00_set_field16(®, TXRX_CSR19_TSF_COUNT, 1); + rt2x00_set_field16(®, TXRX_CSR19_TBCN, 1); + reg0 = reg; + rt2x00_set_field16(®, TXRX_CSR19_BEACON_GEN, 1); + /* + * Beacon generation will fail initially. + * To prevent this we need to change the TXRX_CSR19 + * register several times (reg0 is the same as reg + * except for TXRX_CSR19_BEACON_GEN, which is 0 in reg0 + * and 1 in reg). + */ + rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg); + rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg0); + rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg); + rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg0); + rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg); } static int rt2500usb_get_tx_data_len(struct queue_entry *entry) @@ -1278,37 +1173,6 @@ static int rt2500usb_get_tx_data_len(struct queue_entry *entry) return length; } -static void rt2500usb_kick_tx_queue(struct rt2x00_dev *rt2x00dev, - const enum data_queue_qid queue) -{ - u16 reg, reg0; - - if (queue != QID_BEACON) { - rt2x00usb_kick_tx_queue(rt2x00dev, queue); - return; - } - - rt2500usb_register_read(rt2x00dev, TXRX_CSR19, ®); - if (!rt2x00_get_field16(reg, TXRX_CSR19_BEACON_GEN)) { - rt2x00_set_field16(®, TXRX_CSR19_TSF_COUNT, 1); - rt2x00_set_field16(®, TXRX_CSR19_TBCN, 1); - reg0 = reg; - rt2x00_set_field16(®, TXRX_CSR19_BEACON_GEN, 1); - /* - * Beacon generation will fail initially. - * To prevent this we need to change the TXRX_CSR19 - * register several times (reg0 is the same as reg - * except for TXRX_CSR19_BEACON_GEN, which is 0 in reg0 - * and 1 in reg). - */ - rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg); - rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg0); - rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg); - rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg0); - rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg); - } -} - /* * RX control handlers */ @@ -1343,11 +1207,9 @@ static void rt2500usb_fill_rxdone(struct queue_entry *entry, if (rt2x00_get_field32(word0, RXD_W0_PHYSICAL_ERROR)) rxdesc->flags |= RX_FLAG_FAILED_PLCP_CRC; - if (test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags)) { - rxdesc->cipher = rt2x00_get_field32(word0, RXD_W0_CIPHER); - if (rt2x00_get_field32(word0, RXD_W0_CIPHER_ERROR)) - rxdesc->cipher_status = RX_CRYPTO_FAIL_KEY; - } + rxdesc->cipher = rt2x00_get_field32(word0, RXD_W0_CIPHER); + if (rt2x00_get_field32(word0, RXD_W0_CIPHER_ERROR)) + rxdesc->cipher_status = RX_CRYPTO_FAIL_KEY; if (rxdesc->cipher != CIPHER_NONE) { _rt2x00_desc_read(rxd, 2, &rxdesc->iv[0]); @@ -1543,19 +1405,17 @@ static int rt2500usb_init_eeprom(struct rt2x00_dev *rt2x00dev) rt2500usb_register_read(rt2x00dev, MAC_CSR0, ®); rt2x00_set_chip(rt2x00dev, RT2570, value, reg); - if (!rt2x00_check_rev(&rt2x00dev->chip, 0x000ffff0, 0) || - rt2x00_check_rev(&rt2x00dev->chip, 0x0000000f, 0)) { - + if (((reg & 0xfff0) != 0) || ((reg & 0x0000000f) == 0)) { ERROR(rt2x00dev, "Invalid RT chipset detected.\n"); return -ENODEV; } - if (!rt2x00_rf(&rt2x00dev->chip, RF2522) && - !rt2x00_rf(&rt2x00dev->chip, RF2523) && - !rt2x00_rf(&rt2x00dev->chip, RF2524) && - !rt2x00_rf(&rt2x00dev->chip, RF2525) && - !rt2x00_rf(&rt2x00dev->chip, RF2525E) && - !rt2x00_rf(&rt2x00dev->chip, RF5222)) { + if (!rt2x00_rf(rt2x00dev, RF2522) && + !rt2x00_rf(rt2x00dev, RF2523) && + !rt2x00_rf(rt2x00dev, RF2524) && + !rt2x00_rf(rt2x00dev, RF2525) && + !rt2x00_rf(rt2x00dev, RF2525E) && + !rt2x00_rf(rt2x00dev, RF5222)) { ERROR(rt2x00dev, "Invalid RF chipset detected.\n"); return -ENODEV; } @@ -1788,8 +1648,6 @@ static int rt2500usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev) IEEE80211_HW_SUPPORTS_PS | IEEE80211_HW_PS_NULLFUNC_STACK; - rt2x00dev->hw->extra_tx_headroom = TXD_DESC_SIZE; - SET_IEEE80211_DEV(rt2x00dev->hw, rt2x00dev->dev); SET_IEEE80211_PERM_ADDR(rt2x00dev->hw, rt2x00_eeprom_addr(rt2x00dev, @@ -1801,22 +1659,22 @@ static int rt2500usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev) spec->supported_bands = SUPPORT_BAND_2GHZ; spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM; - if (rt2x00_rf(&rt2x00dev->chip, RF2522)) { + if (rt2x00_rf(rt2x00dev, RF2522)) { spec->num_channels = ARRAY_SIZE(rf_vals_bg_2522); spec->channels = rf_vals_bg_2522; - } else if (rt2x00_rf(&rt2x00dev->chip, RF2523)) { + } else if (rt2x00_rf(rt2x00dev, RF2523)) { spec->num_channels = ARRAY_SIZE(rf_vals_bg_2523); spec->channels = rf_vals_bg_2523; - } else if (rt2x00_rf(&rt2x00dev->chip, RF2524)) { + } else if (rt2x00_rf(rt2x00dev, RF2524)) { spec->num_channels = ARRAY_SIZE(rf_vals_bg_2524); spec->channels = rf_vals_bg_2524; - } else if (rt2x00_rf(&rt2x00dev->chip, RF2525)) { + } else if (rt2x00_rf(rt2x00dev, RF2525)) { spec->num_channels = ARRAY_SIZE(rf_vals_bg_2525); spec->channels = rf_vals_bg_2525; - } else if (rt2x00_rf(&rt2x00dev->chip, RF2525E)) { + } else if (rt2x00_rf(rt2x00dev, RF2525E)) { spec->num_channels = ARRAY_SIZE(rf_vals_bg_2525e); spec->channels = rf_vals_bg_2525e; - } else if (rt2x00_rf(&rt2x00dev->chip, RF5222)) { + } else if (rt2x00_rf(rt2x00dev, RF5222)) { spec->supported_bands |= SUPPORT_BAND_5GHZ; spec->num_channels = ARRAY_SIZE(rf_vals_5222); spec->channels = rf_vals_5222; @@ -1897,7 +1755,6 @@ static const struct ieee80211_ops rt2500usb_mac80211_ops = { .get_stats = rt2x00mac_get_stats, .bss_info_changed = rt2x00mac_bss_info_changed, .conf_tx = rt2x00mac_conf_tx, - .get_tx_stats = rt2x00mac_get_tx_stats, .rfkill_poll = rt2x00mac_rfkill_poll, }; @@ -1910,12 +1767,11 @@ static const struct rt2x00lib_ops rt2500usb_rt2x00_ops = { .rfkill_poll = rt2500usb_rfkill_poll, .link_stats = rt2500usb_link_stats, .reset_tuner = rt2500usb_reset_tuner, - .link_tuner = rt2500usb_link_tuner, .write_tx_desc = rt2500usb_write_tx_desc, .write_tx_data = rt2x00usb_write_tx_data, .write_beacon = rt2500usb_write_beacon, .get_tx_data_len = rt2500usb_get_tx_data_len, - .kick_tx_queue = rt2500usb_kick_tx_queue, + .kick_tx_queue = rt2x00usb_kick_tx_queue, .kill_tx_queue = rt2x00usb_kill_tx_queue, .fill_rxdone = rt2500usb_fill_rxdone, .config_shared_key = rt2500usb_config_key, @@ -1956,20 +1812,21 @@ static const struct data_queue_desc rt2500usb_queue_atim = { }; static const struct rt2x00_ops rt2500usb_ops = { - .name = KBUILD_MODNAME, - .max_sta_intf = 1, - .max_ap_intf = 1, - .eeprom_size = EEPROM_SIZE, - .rf_size = RF_SIZE, - .tx_queues = NUM_TX_QUEUES, - .rx = &rt2500usb_queue_rx, - .tx = &rt2500usb_queue_tx, - .bcn = &rt2500usb_queue_bcn, - .atim = &rt2500usb_queue_atim, - .lib = &rt2500usb_rt2x00_ops, - .hw = &rt2500usb_mac80211_ops, + .name = KBUILD_MODNAME, + .max_sta_intf = 1, + .max_ap_intf = 1, + .eeprom_size = EEPROM_SIZE, + .rf_size = RF_SIZE, + .tx_queues = NUM_TX_QUEUES, + .extra_tx_headroom = TXD_DESC_SIZE, + .rx = &rt2500usb_queue_rx, + .tx = &rt2500usb_queue_tx, + .bcn = &rt2500usb_queue_bcn, + .atim = &rt2500usb_queue_atim, + .lib = &rt2500usb_rt2x00_ops, + .hw = &rt2500usb_mac80211_ops, #ifdef CONFIG_RT2X00_LIB_DEBUGFS - .debugfs = &rt2500usb_rt2x00debug, + .debugfs = &rt2500usb_rt2x00debug, #endif /* CONFIG_RT2X00_LIB_DEBUGFS */ };