X-Git-Url: http://ftp.safe.ca/?a=blobdiff_plain;f=drivers%2Fnet%2Fwireless%2FKconfig;h=fe819a785714f50f5f30299b0d677e595c51b33e;hb=c0380693520b1a1e4f756799a0edc379378b462a;hp=fa2399cbd5cab472074b51d64a117bff1feb1d59;hpb=d8efea254887128d710cc1475505514da004932c;p=safe%2Fjmp%2Flinux-2.6 diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig index fa2399c..fe819a7 100644 --- a/drivers/net/wireless/Kconfig +++ b/drivers/net/wireless/Kconfig @@ -63,17 +63,12 @@ config WAVELAN a Radio LAN (wireless Ethernet-like Local Area Network) using the radio frequencies 900 MHz and 2.4 GHz. - This driver support the ISA version of the WaveLAN card. A separate - driver for the PCMCIA (PC-card) hardware is available in David - Hinds' pcmcia-cs package (see the file - for location). - If you want to use an ISA WaveLAN card under Linux, say Y and read the Ethernet-HOWTO, available from . Some more specific information is contained in and in the source code - . + . You will also need the wireless tools package available from . @@ -116,7 +111,7 @@ config WLAN_80211 lets you choose drivers. config PCMCIA_RAYCS - tristate "Aviator/Raytheon 2.4MHz wireless support" + tristate "Aviator/Raytheon 2.4GHz wireless support" depends on PCMCIA && WLAN_80211 select WIRELESS_EXT ---help--- @@ -128,148 +123,11 @@ config PCMCIA_RAYCS To compile this driver as a module, choose M here: the module will be called ray_cs. If unsure, say N. -config IPW2100 - tristate "Intel PRO/Wireless 2100 Network Connection" - depends on PCI && WLAN_80211 - select WIRELESS_EXT - select FW_LOADER - select IEEE80211 - ---help--- - A driver for the Intel PRO/Wireless 2100 Network - Connection 802.11b wireless network adapter. - - See for information on - the capabilities currently enabled in this driver and for tips - for debugging issues and problems. - - In order to use this driver, you will need a firmware image for it. - You can obtain the firmware from - . Once you have the firmware image, you - will need to place it in /lib/firmware. - - You will also very likely need the Wireless Tools in order to - configure your card: - - . - - If you want to compile the driver as a module ( = code which can be - inserted in and removed from the running kernel whenever you want), - say M here and read . - The module will be called ipw2100.ko. - -config IPW2100_MONITOR - bool "Enable promiscuous mode" - depends on IPW2100 - ---help--- - Enables promiscuous/monitor mode support for the ipw2100 driver. - With this feature compiled into the driver, you can switch to - promiscuous mode via the Wireless Tool's Monitor mode. While in this - mode, no packets can be sent. - -config IPW2100_DEBUG - bool "Enable full debugging output in IPW2100 module." - depends on IPW2100 - ---help--- - This option will enable debug tracing output for the IPW2100. - - This will result in the kernel module being ~60k larger. You can - control which debug output is sent to the kernel log by setting the - value in - - /sys/bus/pci/drivers/ipw2100/debug_level - - This entry will only exist if this option is enabled. - - If you are not trying to debug or develop the IPW2100 driver, you - most likely want to say N here. - -config IPW2200 - tristate "Intel PRO/Wireless 2200BG and 2915ABG Network Connection" - depends on PCI && WLAN_80211 - select WIRELESS_EXT - select FW_LOADER - select IEEE80211 - ---help--- - A driver for the Intel PRO/Wireless 2200BG and 2915ABG Network - Connection adapters. - - See for - information on the capabilities currently enabled in this - driver and for tips for debugging issues and problems. - - In order to use this driver, you will need a firmware image for it. - You can obtain the firmware from - . See the above referenced README.ipw2200 - for information on where to install the firmware images. - - You will also very likely need the Wireless Tools in order to - configure your card: - - . - - If you want to compile the driver as a module ( = code which can be - inserted in and removed from the running kernel whenever you want), - say M here and read . - The module will be called ipw2200.ko. - -config IPW2200_MONITOR - bool "Enable promiscuous mode" - depends on IPW2200 - ---help--- - Enables promiscuous/monitor mode support for the ipw2200 driver. - With this feature compiled into the driver, you can switch to - promiscuous mode via the Wireless Tool's Monitor mode. While in this - mode, no packets can be sent. - -config IPW2200_RADIOTAP - bool "Enable radiotap format 802.11 raw packet support" - depends on IPW2200_MONITOR - -config IPW2200_PROMISCUOUS - bool "Enable creation of a RF radiotap promiscuous interface" - depends on IPW2200_MONITOR - select IPW2200_RADIOTAP - ---help--- - Enables the creation of a second interface prefixed 'rtap'. - This second interface will provide every received in radiotap - format. - - This is useful for performing wireless network analysis while - maintaining an active association. - - Example usage: - - % modprobe ipw2200 rtap_iface=1 - % ifconfig rtap0 up - % tethereal -i rtap0 - - If you do not specify 'rtap_iface=1' as a module parameter then - the rtap interface will not be created and you will need to turn - it on via sysfs: - - % echo 1 > /sys/bus/pci/drivers/ipw2200/*/rtap_iface - -config IPW2200_QOS - bool "Enable QoS support" - depends on IPW2200 && EXPERIMENTAL - -config IPW2200_DEBUG - bool "Enable full debugging output in IPW2200 module." - depends on IPW2200 - ---help--- - This option will enable low level debug tracing output for IPW2200. - - Note, normal debug code is already compiled in. This low level - debug option enables debug on hot paths (e.g Tx, Rx, ISR) and - will result in the kernel module being ~70 larger. Most users - will typically not need this high verbosity debug information. - - If you are not sure, say N here. - config LIBERTAS tristate "Marvell 8xxx Libertas WLAN driver support" depends on WLAN_80211 - select IEEE80211 + select WIRELESS_EXT + select LIB80211 select FW_LOADER ---help--- A library for Marvell Libertas 8xxx devices. @@ -280,12 +138,44 @@ config LIBERTAS_USB ---help--- A driver for Marvell Libertas 8388 USB devices. +config LIBERTAS_CS + tristate "Marvell Libertas 8385 CompactFlash 802.11b/g cards" + depends on LIBERTAS && PCMCIA + select FW_LOADER + ---help--- + A driver for Marvell Libertas 8385 CompactFlash devices. + +config LIBERTAS_SDIO + tristate "Marvell Libertas 8385 and 8686 SDIO 802.11b/g cards" + depends on LIBERTAS && MMC + ---help--- + A driver for Marvell Libertas 8385 and 8686 SDIO devices. + +config LIBERTAS_SPI + tristate "Marvell Libertas 8686 SPI 802.11b/g cards" + depends on LIBERTAS && SPI && GENERIC_GPIO + ---help--- + A driver for Marvell Libertas 8686 SPI devices. + config LIBERTAS_DEBUG bool "Enable full debugging output in the Libertas module." depends on LIBERTAS ---help--- Debugging support. +config LIBERTAS_THINFIRM + tristate "Marvell 8xxx Libertas WLAN driver support with thin firmware" + depends on WLAN_80211 && MAC80211 + select FW_LOADER + ---help--- + A library for Marvell Libertas 8xxx devices using thinfirm. + +config LIBERTAS_THINFIRM_USB + tristate "Marvell Libertas 8388 USB 802.11b/g cards with thin firmware" + depends on LIBERTAS_THINFIRM && USB + ---help--- + A driver for Marvell Libertas 8388 USB devices using thinfirm. + config AIRO tristate "Cisco/Aironet 34X/35X/4500/4800 ISA and PCI cards" depends on ISA_DMA_API && WLAN_80211 && (PCI || BROKEN) @@ -304,81 +194,6 @@ config AIRO The driver can be compiled as a module and will be named "airo". -config HERMES - tristate "Hermes chipset 802.11b support (Orinoco/Prism2/Symbol)" - depends on (PPC_PMAC || PCI || PCMCIA) && WLAN_80211 - select WIRELESS_EXT - ---help--- - A driver for 802.11b wireless cards based on the "Hermes" or - Intersil HFA384x (Prism 2) MAC controller. This includes the vast - majority of the PCMCIA 802.11b cards (which are nearly all rebadges) - - except for the Cisco/Aironet cards. Cards supported include the - Apple Airport (not a PCMCIA card), WavelanIEEE/Orinoco, - Cabletron/EnteraSys Roamabout, ELSA AirLancer, MELCO Buffalo, Avaya, - IBM High Rate Wireless, Farralon Syyline, Samsung MagicLAN, Netgear - MA401, LinkSys WPC-11, D-Link DWL-650, 3Com AirConnect, Intel - PRO/Wireless, and Symbol Spectrum24 High Rate amongst others. - - This option includes the guts of the driver, but in order to - actually use a card you will also need to enable support for PCMCIA - Hermes cards, PLX9052 based PCI adaptors or the Apple Airport below. - - You will also very likely also need the Wireless Tools in order to - configure your card and that /etc/pcmcia/wireless.opts works : - - -config APPLE_AIRPORT - tristate "Apple Airport support (built-in)" - depends on PPC_PMAC && HERMES - help - Say Y here to support the Airport 802.11b wireless Ethernet hardware - built into the Macintosh iBook and other recent PowerPC-based - Macintosh machines. This is essentially a Lucent Orinoco card with - a non-standard interface. - - This driver does not support the Airport Extreme (802.11b/g). Use - the BCM43xx driver for Airport Extreme cards. - -config PLX_HERMES - tristate "Hermes in PLX9052 based PCI adaptor support (Netgear MA301 etc.)" - depends on PCI && HERMES - help - Enable support for PCMCIA cards supported by the "Hermes" (aka - orinoco) driver when used in PLX9052 based PCI adaptors. These - adaptors are not a full PCMCIA controller but act as a more limited - PCI <-> PCMCIA bridge. Several vendors sell such adaptors so that - 802.11b PCMCIA cards can be used in desktop machines. The Netgear - MA301 is such an adaptor. - -config TMD_HERMES - tristate "Hermes in TMD7160 based PCI adaptor support" - depends on PCI && HERMES - help - Enable support for PCMCIA cards supported by the "Hermes" (aka - orinoco) driver when used in TMD7160 based PCI adaptors. These - adaptors are not a full PCMCIA controller but act as a more limited - PCI <-> PCMCIA bridge. Several vendors sell such adaptors so that - 802.11b PCMCIA cards can be used in desktop machines. - -config NORTEL_HERMES - tristate "Nortel emobility PCI adaptor support" - depends on PCI && HERMES - help - Enable support for PCMCIA cards supported by the "Hermes" (aka - orinoco) driver when used in Nortel emobility PCI adaptors. These - adaptors are not full PCMCIA controllers, but act as a more limited - PCI <-> PCMCIA bridge. - -config PCI_HERMES - tristate "Prism 2.5 PCI 802.11b adaptor support" - depends on PCI && HERMES - help - Enable support for PCI and mini-PCI 802.11b wireless NICs based on - the Prism 2.5 chipset. These are true PCI cards, not the 802.11b - PCMCIA cards bundled with PCI<->PCMCIA adaptors which are also - common. Some of the built-in wireless adaptors in laptops are of - this variety. - config ATMEL tristate "Atmel at76c50x chipset 802.11b support" depends on (PCI || PCMCIA) && WLAN_80211 @@ -387,10 +202,10 @@ config ATMEL select CRC32 ---help--- A driver 802.11b wireless cards based on the Atmel fast-vnet - chips. This driver supports standard Linux wireless extensions. - + chips. This driver supports standard Linux wireless extensions. + Many cards based on this chipset do not have flash memory - and need their firmware loaded at start-up. If yours is + and need their firmware loaded at start-up. If yours is one of these, you will need to provide a firmware image to be loaded into the card by the driver. The Atmel firmware package can be downloaded from @@ -403,39 +218,15 @@ config PCI_ATMEL Enable support for PCI and mini-PCI cards containing the Atmel at76c506 chip. -config PCMCIA_HERMES - tristate "Hermes PCMCIA card support" - depends on PCMCIA && HERMES - ---help--- - A driver for "Hermes" chipset based PCMCIA wireless adaptors, such - as the Lucent WavelanIEEE/Orinoco cards and their OEM (Cabletron/ - EnteraSys RoamAbout 802.11, ELSA Airlancer, Melco Buffalo and - others). It should also be usable on various Prism II based cards - such as the Linksys, D-Link and Farallon Skyline. It should also - work on Symbol cards such as the 3Com AirConnect and Ericsson WLAN. - - To use your PC-cards, you will need supporting software from David - Hinds' pcmcia-cs package (see the file - for location). You also want to check out the PCMCIA-HOWTO, - available from . - - You will also very likely also need the Wireless Tools in order to - configure your card and that /etc/pcmcia/wireless.opts works: - . - -config PCMCIA_SPECTRUM - tristate "Symbol Spectrum24 Trilogy PCMCIA card support" - depends on PCMCIA && HERMES +config PCMCIA_ATMEL + tristate "Atmel at76c502/at76c504 PCMCIA cards" + depends on ATMEL && PCMCIA + select WIRELESS_EXT select FW_LOADER + select CRC32 ---help--- - - This is a driver for 802.11b cards using RAM-loadable Symbol - firmware, such as Symbol Wireless Networker LA4100, CompactFlash - cards by Socket Communications and Intel PRO/Wireless 2011B. - - This driver requires firmware download on startup. Utilities - for downloading Symbol firmware are available at - + Enable support for PCMCIA cards containing the + Atmel at76c502 and at76c504 chips. config AIRO_CS tristate "Cisco/Aironet 34X/35X/4500/4800 PCMCIA cards" @@ -457,21 +248,6 @@ config AIRO_CS and Cisco proprietary API, so both the Linux Wireless Tools and the Cisco Linux utilities can be used to configure the card. - To use your PC-cards, you will need supporting software from David - Hinds' pcmcia-cs package (see the file - for location). You also want to check out the PCMCIA-HOWTO, - available from . - -config PCMCIA_ATMEL - tristate "Atmel at76c502/at76c504 PCMCIA cards" - depends on ATMEL && PCMCIA - select WIRELESS_EXT - select FW_LOADER - select CRC32 - ---help--- - Enable support for PCMCIA cards containing the - Atmel at76c502 and at76c504 chips. - config PCMCIA_WL3501 tristate "Planet WL3501 PCMCIA cards" depends on EXPERIMENTAL && PCMCIA && WLAN_80211 @@ -546,8 +322,159 @@ config USB_ZD1201 To compile this driver as a module, choose M here: the module will be called zd1201. +config USB_NET_RNDIS_WLAN + tristate "Wireless RNDIS USB support" + depends on USB && WLAN_80211 && EXPERIMENTAL + select USB_USBNET + select USB_NET_CDCETHER + select USB_NET_RNDIS_HOST + select WIRELESS_EXT + ---help--- + This is a driver for wireless RNDIS devices. + These are USB based adapters found in devices such as: + + Buffalo WLI-U2-KG125S + U.S. Robotics USR5421 + Belkin F5D7051 + Linksys WUSB54GSv2 + Linksys WUSB54GSC + Asus WL169gE + Eminent EM4045 + BT Voyager 1055 + Linksys WUSB54GSv1 + U.S. Robotics USR5420 + BUFFALO WLI-USB-G54 + + All of these devices are based on Broadcom 4320 chip which is the + only wireless RNDIS chip known to date. + + If you choose to build a module, it'll be called rndis_wlan. + +config RTL8180 + tristate "Realtek 8180/8185 PCI support" + depends on MAC80211 && PCI && WLAN_80211 && EXPERIMENTAL + select EEPROM_93CX6 + ---help--- + This is a driver for RTL8180 and RTL8185 based cards. + These are PCI based chips found in cards such as: + + (RTL8185 802.11g) + A-Link WL54PC + + (RTL8180 802.11b) + Belkin F5D6020 v3 + Belkin F5D6020 v3 + Dlink DWL-610 + Dlink DWL-510 + Netgear MA521 + Level-One WPC-0101 + Acer Aspire 1357 LMi + VCTnet PC-11B1 + Ovislink AirLive WL-1120PCM + Mentor WL-PCI + Linksys WPC11 v4 + TrendNET TEW-288PI + D-Link DWL-520 Rev D + Repotec RP-WP7126 + TP-Link TL-WN250/251 + Zonet ZEW1000 + Longshine LCS-8031-R + HomeLine HLW-PCC200 + GigaFast WF721-AEX + Planet WL-3553 + Encore ENLWI-PCI1-NT + TrendNET TEW-266PC + Gigabyte GN-WLMR101 + Siemens-fujitsu Amilo D1840W + Edimax EW-7126 + PheeNet WL-11PCIR + Tonze PC-2100T + Planet WL-8303 + Dlink DWL-650 v M1 + Edimax EW-7106 + Q-Tec 770WC + Topcom Skyr@cer 4011b + Roper FreeLan 802.11b (edition 2004) + Wistron Neweb Corp CB-200B + Pentagram HorNET + QTec 775WC + TwinMOS Booming B Series + Micronet SP906BB + Sweex LC700010 + Surecom EP-9428 + Safecom SWLCR-1100 + + Thanks to Realtek for their support! + +config RTL8187 + tristate "Realtek 8187 and 8187B USB support" + depends on MAC80211 && USB && WLAN_80211 + select EEPROM_93CX6 + ---help--- + This is a driver for RTL8187 and RTL8187B based cards. + These are USB based chips found in devices such as: + + Netgear WG111v2 + Level 1 WNC-0301USB + Micronet SP907GK V5 + Encore ENUWI-G2 + Trendnet TEW-424UB + ASUS P5B Deluxe + Toshiba Satellite Pro series of laptops + Asus Wireless Link + + Thanks to Realtek for their support! + +config ADM8211 + tristate "ADMtek ADM8211 support" + depends on MAC80211 && PCI && WLAN_80211 && EXPERIMENTAL + select CRC32 + select EEPROM_93CX6 + ---help--- + This driver is for ADM8211A, ADM8211B, and ADM8211C based cards. + These are PCI/mini-PCI/Cardbus 802.11b chips found in cards such as: + + Xterasys Cardbus XN-2411b + Blitz NetWave Point PC + TrendNet 221pc + Belkin F5D6001 + SMC 2635W + Linksys WPC11 v1 + Fiberline FL-WL-200X + 3com Office Connect (3CRSHPW796) + Corega WLPCIB-11 + SMC 2602W V2 EU + D-Link DWL-520 Revision C + + However, some of these cards have been replaced with other chips + like the RTL8180L (Xterasys Cardbus XN-2411b, Belkin F5D6001) or + the Ralink RT2400 (SMC2635W) without a model number change. + + Thanks to Infineon-ADMtek for their support of this driver. + +config MAC80211_HWSIM + tristate "Simulated radio testing tool for mac80211" + depends on MAC80211 && WLAN_80211 + ---help--- + This driver is a developer testing tool that can be used to test + IEEE 802.11 networking stack (mac80211) functionality. This is not + needed for normal wireless LAN usage and is only for testing. See + Documentation/networking/mac80211_hwsim for more information on how + to use this tool. + + To compile this driver as a module, choose M here: the module will be + called mac80211_hwsim. If unsure, say N. + +source "drivers/net/wireless/p54/Kconfig" +source "drivers/net/wireless/ath5k/Kconfig" +source "drivers/net/wireless/ath9k/Kconfig" +source "drivers/net/wireless/ipw2x00/Kconfig" +source "drivers/net/wireless/iwlwifi/Kconfig" source "drivers/net/wireless/hostap/Kconfig" -source "drivers/net/wireless/bcm43xx/Kconfig" +source "drivers/net/wireless/b43/Kconfig" +source "drivers/net/wireless/b43legacy/Kconfig" source "drivers/net/wireless/zd1211rw/Kconfig" +source "drivers/net/wireless/rt2x00/Kconfig" +source "drivers/net/wireless/orinoco/Kconfig" endmenu