X-Git-Url: http://ftp.safe.ca/?a=blobdiff_plain;f=drivers%2Fnet%2Fwireless%2FKconfig;h=fdf5aa8b84297a74e4d8aa4ce7ac120a5fa773fd;hb=14a08a7fcf72a8d69cdee225cc76c50b229faa20;hp=cfedbda81e3f54ae6d725aacd3fcd4a8a524b9ba;hpb=e9ddc0f25ce524d257e6cf779e495f567ed7678f;p=safe%2Fjmp%2Flinux-2.6

diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig
index cfedbda..fdf5aa8 100644
--- a/drivers/net/wireless/Kconfig
+++ b/drivers/net/wireless/Kconfig
@@ -146,12 +146,15 @@ config IPW2100
           configure your card:
 
           <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>.
+
+          It is recommended that you compile this driver as a module (M)
+          rather than built-in (Y). This driver requires firmware at device
+          initialization time, and when built-in this typically happens
+          before the filesystem is accessible (hence firmware will be
+          unavailable and initialization will fail). If you do choose to build
+          this driver into your kernel image, you can avoid this problem by
+          including the firmware and a firmware loader in an initramfs.
  
-          If you want to compile the driver as a module ( = code which can be
-          inserted in and removed from the running kernel whenever you want),
-          say M here and read <file:Documentation/kbuild/modules.txt>.
-          The module will be called ipw2100.ko.
-	
 config IPW2100_MONITOR
         bool "Enable promiscuous mode"
         depends on IPW2100
@@ -201,11 +204,14 @@ config IPW2200
           configure your card:
 
           <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>.
- 
-          If you want to compile the driver as a module ( = code which can be
-          inserted in and removed from the running kernel whenever you want),
-          say M here and read <file:Documentation/kbuild/modules.txt>.
-          The module will be called ipw2200.ko.
+
+          It is recommended that you compile this driver as a module (M)
+          rather than built-in (Y). This driver requires firmware at device
+          initialization time, and when built-in this typically happens
+          before the filesystem is accessible (hence firmware will be
+          unavailable and initialization will fail). If you do choose to build
+          this driver into your kernel image, you can avoid this problem by
+          including the firmware and a firmware loader in an initramfs.
 
 config IPW2200_MONITOR
         bool "Enable promiscuous mode"
@@ -265,7 +271,6 @@ config LIBERTAS
 	tristate "Marvell 8xxx Libertas WLAN driver support"
 	depends on WLAN_80211
 	select WIRELESS_EXT
-	select IEEE80211
 	select FW_LOADER
 	---help---
 	  A library for Marvell Libertas 8xxx devices.
@@ -278,7 +283,7 @@ config LIBERTAS_USB
 
 config LIBERTAS_CS
 	tristate "Marvell Libertas 8385 CompactFlash 802.11b/g cards"
-	depends on LIBERTAS && PCMCIA && EXPERIMENTAL
+	depends on LIBERTAS && PCMCIA
 	select FW_LOADER
 	---help---
 	  A driver for Marvell Libertas 8385 CompactFlash devices.
@@ -668,74 +673,10 @@ config ADM8211
 
 	  Thanks to Infineon-ADMtek for their support of this driver.
 
-config P54_COMMON
-	tristate "Softmac Prism54 support"
-	depends on MAC80211 && WLAN_80211 && FW_LOADER && EXPERIMENTAL
-	---help---
-	  This is common code for isl38xx based cards.
-	  This module does nothing by itself - the USB/PCI frontends
-	  also need to be enabled in order to support any devices.
-
-	  These devices require softmac firmware which can be found at
-	  http://prism54.org/
-
-	  If you choose to build a module, it'll be called p54common.
-
-config P54_USB
-	tristate "Prism54 USB support"
-	depends on P54_COMMON && USB
-	select CRC32
-	---help---
-	  This driver is for USB isl38xx based wireless cards.
-	  These are USB based adapters found in devices such as:
-
-	  3COM 3CRWE254G72
-	  SMC 2862W-G
-	  Accton 802.11g WN4501 USB
-	  Siemens Gigaset USB
-	  Netgear WG121
-	  Netgear WG111
-	  Medion 40900, Roper Europe
-	  Shuttle PN15, Airvast WM168g, IOGear GWU513
-	  Linksys WUSB54G
-	  Linksys WUSB54G Portable
-	  DLink DWL-G120 Spinnaker
-	  DLink DWL-G122
-	  Belkin F5D7050 ver 1000
-	  Cohiba Proto board
-	  SMC 2862W-G version 2
-	  U.S. Robotics U5 802.11g Adapter
-	  FUJITSU E-5400 USB D1700
-	  Sagem XG703A
-	  DLink DWL-G120 Cohiba
-	  Spinnaker Proto board
-	  Linksys WUSB54AG
-	  Inventel UR054G
-	  Spinnaker DUT
-
-	  These devices require softmac firmware which can be found at
-	  http://prism54.org/
-
-	  If you choose to build a module, it'll be called p54usb.
-
-config P54_PCI
-	tristate "Prism54 PCI support"
-	depends on P54_COMMON && PCI
-	---help---
-	  This driver is for PCI isl38xx based wireless cards.
-	  This driver supports most devices that are supported by the
-	  fullmac prism54 driver plus many devices which are not
-	  supported by the fullmac driver/firmware.
-
-	  This driver requires softmac firmware which can be found at
-	  http://prism54.org/
-
-	  If you choose to build a module, it'll be called p54pci.
-
+source "drivers/net/wireless/p54/Kconfig"
 source "drivers/net/wireless/ath5k/Kconfig"
 source "drivers/net/wireless/iwlwifi/Kconfig"
 source "drivers/net/wireless/hostap/Kconfig"
-source "drivers/net/wireless/bcm43xx/Kconfig"
 source "drivers/net/wireless/b43/Kconfig"
 source "drivers/net/wireless/b43legacy/Kconfig"
 source "drivers/net/wireless/zd1211rw/Kconfig"