X-Git-Url: http://ftp.safe.ca/?a=blobdiff_plain;f=drivers%2Fnet%2Fvia-rhine.c;h=8c9d6ae2bb31dae8eab737ae1105649aecde7336;hb=b99a017c01bb19b58fd0826e36a1bdacf581c545;hp=fdc21037f6dcf8204bf8950e7d294527312c1091;hpb=38bb6b288bf4fb954a3793e57c7339774c842a54;p=safe%2Fjmp%2Flinux-2.6 diff --git a/drivers/net/via-rhine.c b/drivers/net/via-rhine.c index fdc2103..8c9d6ae 100644 --- a/drivers/net/via-rhine.c +++ b/drivers/net/via-rhine.c @@ -25,117 +25,13 @@ version. He may or may not be interested in bug reports on this code. You can find his versions at: http://www.scyld.com/network/via-rhine.html - - - Linux kernel version history: - - LK1.1.0: - - Jeff Garzik: softnet 'n stuff - - LK1.1.1: - - Justin Guyett: softnet and locking fixes - - Jeff Garzik: use PCI interface - - LK1.1.2: - - Urban Widmark: minor cleanups, merges from Becker 1.03a/1.04 versions - - LK1.1.3: - - Urban Widmark: use PCI DMA interface (with thanks to the eepro100.c - code) update "Theory of Operation" with - softnet/locking changes - - Dave Miller: PCI DMA and endian fixups - - Jeff Garzik: MOD_xxx race fixes, updated PCI resource allocation - - LK1.1.4: - - Urban Widmark: fix gcc 2.95.2 problem and - remove writel's to fixed address 0x7c - - LK1.1.5: - - Urban Widmark: mdio locking, bounce buffer changes - merges from Beckers 1.05 version - added netif_running_on/off support - - LK1.1.6: - - Urban Widmark: merges from Beckers 1.08b version (VT6102 + mdio) - set netif_running_on/off on startup, del_timer_sync - - LK1.1.7: - - Manfred Spraul: added reset into tx_timeout - - LK1.1.9: - - Urban Widmark: merges from Beckers 1.10 version - (media selection + eeprom reload) - - David Vrabel: merges from D-Link "1.11" version - (disable WOL and PME on startup) - - LK1.1.10: - - Manfred Spraul: use "singlecopy" for unaligned buffers - don't allocate bounce buffers for !ReqTxAlign cards - - LK1.1.11: - - David Woodhouse: Set dev->base_addr before the first time we call - wait_for_reset(). It's a lot happier that way. - Free np->tx_bufs only if we actually allocated it. - - LK1.1.12: - - Martin Eriksson: Allow Memory-Mapped IO to be enabled. - - LK1.1.13 (jgarzik): - - Add ethtool support - - Replace some MII-related magic numbers with constants - - LK1.1.14 (Ivan G.): - - fixes comments for Rhine-III - - removes W_MAX_TIMEOUT (unused) - - adds HasDavicomPhy for Rhine-I (basis: linuxfet driver; my card - is R-I and has Davicom chip, flag is referenced in kernel driver) - - sends chip_id as a parameter to wait_for_reset since np is not - initialized on first call - - changes mmio "else if (chip_id==VT6102)" to "else" so it will work - for Rhine-III's (documentation says same bit is correct) - - transmit frame queue message is off by one - fixed - - adds IntrNormalSummary to "Something Wicked" exclusion list - so normal interrupts will not trigger the message (src: Donald Becker) - (Roger Luethi) - - show confused chip where to continue after Tx error - - location of collision counter is chip specific - - allow selecting backoff algorithm (module parameter) - - LK1.1.15 (jgarzik): - - Use new MII lib helper generic_mii_ioctl - - LK1.1.16 (Roger Luethi) - - Etherleak fix - - Handle Tx buffer underrun - - Fix bugs in full duplex handling - - New reset code uses "force reset" cmd on Rhine-II - - Various clean ups - - LK1.1.17 (Roger Luethi) - - Fix race in via_rhine_start_tx() - - On errors, wait for Tx engine to turn off before scavenging - - Handle Tx descriptor write-back race on Rhine-II - - Force flushing for PCI posted writes - - More reset code changes - - LK1.1.18 (Roger Luethi) - - No filtering multicast in promisc mode (Edward Peng) - - Fix for Rhine-I Tx timeouts - - LK1.1.19 (Roger Luethi) - - Increase Tx threshold for unspecified errors - - LK1.2.0-2.6 (Roger Luethi) - - Massive clean-up - - Rewrite PHY, media handling (remove options, full_duplex, backoff) - - Fix Tx engine race for good - - Craig Brind: Zero padded aligned buffers for short packets. + [link no longer provides useful info -jgarzik] */ #define DRV_NAME "via-rhine" -#define DRV_VERSION "1.2.0-2.6" -#define DRV_RELDATE "June-10-2004" +#define DRV_VERSION "1.4.3" +#define DRV_RELDATE "2007-03-06" /* A few user-configurable values. @@ -146,7 +42,17 @@ static int max_interrupt_work = 20; /* Set the copy breakpoint for the copy-only-tiny-frames scheme. Setting to > 1518 effectively disables this feature. */ +#if defined(__alpha__) || defined(__arm__) || defined(__hppa__) \ + || defined(CONFIG_SPARC) || defined(__ia64__) \ + || defined(__sh__) || defined(__mips__) +static int rx_copybreak = 1518; +#else static int rx_copybreak; +#endif + +/* Work-around for broken BIOSes: they are unable to get the chip back out of + power state D3 so PXE booting fails. bootparam(7): via-rhine.avoid_D3=1 */ +static int avoid_D3; /* * In case you are looking for 'options[]' or 'full_duplex[]', they @@ -167,7 +73,11 @@ static const int multicast_filter_limit = 32; There are no ill effects from too-large receive rings. */ #define TX_RING_SIZE 16 #define TX_QUEUE_LEN 10 /* Limit ring entries actually used. */ +#ifdef CONFIG_VIA_RHINE_NAPI +#define RX_RING_SIZE 64 +#else #define RX_RING_SIZE 16 +#endif /* Operational parameters that usually are not changed. */ @@ -201,6 +111,7 @@ static const int multicast_filter_limit = 32; #include #include #include +#include /* These identify the driver base version and may not be removed. */ static char version[] __devinitdata = @@ -220,9 +131,11 @@ MODULE_LICENSE("GPL"); module_param(max_interrupt_work, int, 0); module_param(debug, int, 0); module_param(rx_copybreak, int, 0); +module_param(avoid_D3, bool, 0); MODULE_PARM_DESC(max_interrupt_work, "VIA Rhine maximum events handled per interrupt"); MODULE_PARM_DESC(debug, "VIA Rhine debug level (0-7)"); MODULE_PARM_DESC(rx_copybreak, "VIA Rhine copy breakpoint for copy-only-tiny-frames"); +MODULE_PARM_DESC(avoid_D3, "Avoid power state D3 (work-around for broken BIOSes)"); /* Theory of Operation @@ -356,12 +269,11 @@ enum rhine_quirks { /* Beware of PCI posted writes */ #define IOSYNC do { ioread8(ioaddr + StationAddr); } while (0) -static struct pci_device_id rhine_pci_tbl[] = -{ - {0x1106, 0x3043, PCI_ANY_ID, PCI_ANY_ID, 0, 0, }, /* VT86C100A */ - {0x1106, 0x3065, PCI_ANY_ID, PCI_ANY_ID, 0, 0, }, /* VT6102 */ - {0x1106, 0x3106, PCI_ANY_ID, PCI_ANY_ID, 0, 0, }, /* 6105{,L,LOM} */ - {0x1106, 0x3053, PCI_ANY_ID, PCI_ANY_ID, 0, 0, }, /* VT6105M */ +static const struct pci_device_id rhine_pci_tbl[] = { + { 0x1106, 0x3043, PCI_ANY_ID, PCI_ANY_ID, }, /* VT86C100A */ + { 0x1106, 0x3065, PCI_ANY_ID, PCI_ANY_ID, }, /* VT6102 */ + { 0x1106, 0x3106, PCI_ANY_ID, PCI_ANY_ID, }, /* 6105{,L,LOM} */ + { 0x1106, 0x3053, PCI_ANY_ID, PCI_ANY_ID, }, /* VT6105M */ { } /* terminate list */ }; MODULE_DEVICE_TABLE(pci, rhine_pci_tbl); @@ -423,16 +335,16 @@ enum wol_bits { /* The Rx and Tx buffer descriptors. */ struct rx_desc { - s32 rx_status; - u32 desc_length; /* Chain flag, Buffer/frame length */ - u32 addr; - u32 next_desc; + __le32 rx_status; + __le32 desc_length; /* Chain flag, Buffer/frame length */ + __le32 addr; + __le32 next_desc; }; struct tx_desc { - s32 tx_status; - u32 desc_length; /* Chain flag, Tx Config, Frame length */ - u32 addr; - u32 next_desc; + __le32 tx_status; + __le32 desc_length; /* Chain flag, Tx Config, Frame length */ + __le32 addr; + __le32 next_desc; }; /* Initial value for tx_desc.desc_length, Buffer size goes to bits 0-10 */ @@ -477,6 +389,8 @@ struct rhine_private { struct pci_dev *pdev; long pioaddr; + struct net_device *dev; + struct napi_struct napi; struct net_device_stats stats; spinlock_t lock; @@ -499,14 +413,14 @@ static void mdio_write(struct net_device *dev, int phy_id, int location, int val static int rhine_open(struct net_device *dev); static void rhine_tx_timeout(struct net_device *dev); static int rhine_start_tx(struct sk_buff *skb, struct net_device *dev); -static irqreturn_t rhine_interrupt(int irq, void *dev_instance, struct pt_regs *regs); +static irqreturn_t rhine_interrupt(int irq, void *dev_instance); static void rhine_tx(struct net_device *dev); -static void rhine_rx(struct net_device *dev); +static int rhine_rx(struct net_device *dev, int limit); static void rhine_error(struct net_device *dev, int intr_status); static void rhine_set_rx_mode(struct net_device *dev); static struct net_device_stats *rhine_get_stats(struct net_device *dev); static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); -static struct ethtool_ops netdev_ethtool_ops; +static const struct ethtool_ops netdev_ethtool_ops; static int rhine_close(struct net_device *dev); static void rhine_shutdown (struct pci_dev *pdev); @@ -664,12 +578,35 @@ static void __devinit rhine_reload_eeprom(long pioaddr, struct net_device *dev) static void rhine_poll(struct net_device *dev) { disable_irq(dev->irq); - rhine_interrupt(dev->irq, (void *)dev, NULL); + rhine_interrupt(dev->irq, (void *)dev); enable_irq(dev->irq); } #endif -static void rhine_hw_init(struct net_device *dev, long pioaddr) +#ifdef CONFIG_VIA_RHINE_NAPI +static int rhine_napipoll(struct napi_struct *napi, int budget) +{ + struct rhine_private *rp = container_of(napi, struct rhine_private, napi); + struct net_device *dev = rp->dev; + void __iomem *ioaddr = rp->base; + int work_done; + + work_done = rhine_rx(dev, budget); + + if (work_done < budget) { + netif_rx_complete(dev, napi); + + iowrite16(IntrRxDone | IntrRxErr | IntrRxEmpty| IntrRxOverflow | + IntrRxDropped | IntrRxNoBuf | IntrTxAborted | + IntrTxDone | IntrTxError | IntrTxUnderrun | + IntrPCIErr | IntrStatsMax | IntrLinkChange, + ioaddr + IntrEnable); + } + return work_done; +} +#endif + +static void __devinit rhine_hw_init(struct net_device *dev, long pioaddr) { struct rhine_private *rp = netdev_priv(dev); @@ -690,7 +627,6 @@ static int __devinit rhine_init_one(struct pci_dev *pdev, struct net_device *dev; struct rhine_private *rp; int i, rc; - u8 pci_rev; u32 quirks; long pioaddr; long memaddr; @@ -702,6 +638,7 @@ static int __devinit rhine_init_one(struct pci_dev *pdev, #else int bar = 0; #endif + DECLARE_MAC_BUF(mac); /* when built into the kernel, we only print version if device is found */ #ifndef MODULE @@ -710,27 +647,25 @@ static int __devinit rhine_init_one(struct pci_dev *pdev, printk(version); #endif - pci_read_config_byte(pdev, PCI_REVISION_ID, &pci_rev); - io_size = 256; phy_id = 0; quirks = 0; name = "Rhine"; - if (pci_rev < VTunknown0) { + if (pdev->revision < VTunknown0) { quirks = rqRhineI; io_size = 128; } - else if (pci_rev >= VT6102) { + else if (pdev->revision >= VT6102) { quirks = rqWOL | rqForceReset; - if (pci_rev < VT6105) { + if (pdev->revision < VT6105) { name = "Rhine II"; quirks |= rqStatusWBRace; /* Rhine-II exclusive */ } else { phy_id = 1; /* Integrated PHY, phy_id fixed to 1 */ - if (pci_rev >= VT6105_B0) + if (pdev->revision >= VT6105_B0) quirks |= rq6patterns; - if (pci_rev < VT6105M) + if (pdev->revision < VT6105M) name = "Rhine III"; else name = "Rhine III (Management Adapter)"; @@ -768,10 +703,10 @@ static int __devinit rhine_init_one(struct pci_dev *pdev, printk(KERN_ERR "alloc_etherdev failed\n"); goto err_out; } - SET_MODULE_OWNER(dev); SET_NETDEV_DEV(dev, &pdev->dev); rp = netdev_priv(dev); + rp->dev = dev; rp->quirks = quirks; rp->pioaddr = pioaddr; rp->pdev = pdev; @@ -849,6 +784,9 @@ static int __devinit rhine_init_one(struct pci_dev *pdev, #ifdef CONFIG_NET_POLL_CONTROLLER dev->poll_controller = rhine_poll; #endif +#ifdef CONFIG_VIA_RHINE_NAPI + netif_napi_add(dev, &rp->napi, rhine_napipoll, 64); +#endif if (rp->quirks & rqRhineI) dev->features |= NETIF_F_SG|NETIF_F_HW_CSUM; @@ -857,18 +795,14 @@ static int __devinit rhine_init_one(struct pci_dev *pdev, if (rc) goto err_out_unmap; - printk(KERN_INFO "%s: VIA %s at 0x%lx, ", + printk(KERN_INFO "%s: VIA %s at 0x%lx, %s, IRQ %d.\n", dev->name, name, #ifdef USE_MMIO - memaddr + memaddr, #else - (long)ioaddr + (long)ioaddr, #endif - ); - - for (i = 0; i < 5; i++) - printk("%2.2x:", dev->dev_addr[i]); - printk("%2.2x, IRQ %d.\n", dev->dev_addr[i], pdev->irq); + print_mac(mac, dev->dev_addr), pdev->irq); pci_set_drvdata(pdev, dev); @@ -894,6 +828,9 @@ static int __devinit rhine_init_one(struct pci_dev *pdev, } } rp->mii_if.phy_id = phy_id; + if (debug > 1 && avoid_D3) + printk(KERN_INFO "%s: No D3 power state at shutdown.\n", + dev->name); return 0; @@ -1119,6 +1056,10 @@ static void init_registers(struct net_device *dev) rhine_set_rx_mode(dev); +#ifdef CONFIG_VIA_RHINE_NAPI + napi_enable(&rp->napi); +#endif + /* Enable interrupts by setting the interrupt mask. */ iowrite16(IntrRxDone | IntrRxErr | IntrRxEmpty| IntrRxOverflow | IntrRxDropped | IntrRxNoBuf | IntrTxAborted | @@ -1210,7 +1151,7 @@ static int rhine_open(struct net_device *dev) void __iomem *ioaddr = rp->base; int rc; - rc = request_irq(rp->pdev->irq, &rhine_interrupt, SA_SHIRQ, dev->name, + rc = request_irq(rp->pdev->irq, &rhine_interrupt, IRQF_SHARED, dev->name, dev); if (rc) return rc; @@ -1252,6 +1193,10 @@ static void rhine_tx_timeout(struct net_device *dev) /* protect against concurrent rx interrupts */ disable_irq(rp->pdev->irq); +#ifdef CONFIG_VIA_RHINE_NAPI + napi_disable(&rp->napi); +#endif + spin_lock(&rp->lock); /* clear all descriptors */ @@ -1284,16 +1229,13 @@ static int rhine_start_tx(struct sk_buff *skb, struct net_device *dev) /* Calculate the next Tx descriptor entry. */ entry = rp->cur_tx % TX_RING_SIZE; - if (skb->len < ETH_ZLEN) { - skb = skb_padto(skb, ETH_ZLEN); - if (skb == NULL) - return 0; - } + if (skb_padto(skb, ETH_ZLEN)) + return 0; rp->tx_skbuff[entry] = skb; if ((rp->quirks & rqRhineI) && - (((unsigned long)skb->data & 3) || skb_shinfo(skb)->nr_frags != 0 || skb->ip_summed == CHECKSUM_HW)) { + (((unsigned long)skb->data & 3) || skb_shinfo(skb)->nr_frags != 0 || skb->ip_summed == CHECKSUM_PARTIAL)) { /* Must use alignment buffer. */ if (skb->len > PKT_BUF_SZ) { /* packet too long, drop it */ @@ -1353,7 +1295,7 @@ static int rhine_start_tx(struct sk_buff *skb, struct net_device *dev) /* The interrupt handler does all of the Rx thread work and cleans up after the Tx thread. */ -static irqreturn_t rhine_interrupt(int irq, void *dev_instance, struct pt_regs *rgs) +static irqreturn_t rhine_interrupt(int irq, void *dev_instance) { struct net_device *dev = dev_instance; struct rhine_private *rp = netdev_priv(dev); @@ -1376,8 +1318,18 @@ static irqreturn_t rhine_interrupt(int irq, void *dev_instance, struct pt_regs * dev->name, intr_status); if (intr_status & (IntrRxDone | IntrRxErr | IntrRxDropped | - IntrRxWakeUp | IntrRxEmpty | IntrRxNoBuf)) - rhine_rx(dev); + IntrRxWakeUp | IntrRxEmpty | IntrRxNoBuf)) { +#ifdef CONFIG_VIA_RHINE_NAPI + iowrite16(IntrTxAborted | + IntrTxDone | IntrTxError | IntrTxUnderrun | + IntrPCIErr | IntrStatsMax | IntrLinkChange, + ioaddr + IntrEnable); + + netif_rx_schedule(dev, &rp->napi); +#else + rhine_rx(dev, RX_RING_SIZE); +#endif + } if (intr_status & (IntrTxErrSummary | IntrTxDone)) { if (intr_status & IntrTxErrSummary) { @@ -1386,7 +1338,7 @@ static irqreturn_t rhine_interrupt(int irq, void *dev_instance, struct pt_regs * if (debug > 2 && ioread8(ioaddr+ChipCmd) & CmdTxOn) printk(KERN_WARNING "%s: " - "rhine_interrupt() Tx engine" + "rhine_interrupt() Tx engine " "still on.\n", dev->name); } rhine_tx(dev); @@ -1475,13 +1427,12 @@ static void rhine_tx(struct net_device *dev) spin_unlock(&rp->lock); } -/* This routine is logically part of the interrupt handler, but isolated - for clarity and better register allocation. */ -static void rhine_rx(struct net_device *dev) +/* Process up to limit frames from receive ring */ +static int rhine_rx(struct net_device *dev, int limit) { struct rhine_private *rp = netdev_priv(dev); + int count; int entry = rp->cur_rx % RX_RING_SIZE; - int boguscnt = rp->dirty_rx + RX_RING_SIZE - rp->cur_rx; if (debug > 4) { printk(KERN_DEBUG "%s: rhine_rx(), entry %d status %8.8x.\n", @@ -1490,16 +1441,18 @@ static void rhine_rx(struct net_device *dev) } /* If EOP is set on the next entry, it's a new packet. Send it up. */ - while (!(rp->rx_head_desc->rx_status & cpu_to_le32(DescOwn))) { + for (count = 0; count < limit; ++count) { struct rx_desc *desc = rp->rx_head_desc; u32 desc_status = le32_to_cpu(desc->rx_status); int data_size = desc_status >> 16; + if (desc_status & DescOwn) + break; + if (debug > 4) printk(KERN_DEBUG "rhine_rx() status is %8.8x.\n", desc_status); - if (--boguscnt < 0) - break; + if ((desc_status & (RxWholePkt | RxErr)) != RxWholePkt) { if ((desc_status & RxWholePkt) != RxWholePkt) { printk(KERN_WARNING "%s: Oversized Ethernet " @@ -1537,16 +1490,15 @@ static void rhine_rx(struct net_device *dev) copying to a minimally-sized skbuff. */ if (pkt_len < rx_copybreak && (skb = dev_alloc_skb(pkt_len + 2)) != NULL) { - skb->dev = dev; skb_reserve(skb, 2); /* 16 byte align the IP header */ pci_dma_sync_single_for_cpu(rp->pdev, rp->rx_skbuff_dma[entry], rp->rx_buf_sz, PCI_DMA_FROMDEVICE); - eth_copy_and_sum(skb, + skb_copy_to_linear_data(skb, rp->rx_skbuff[entry]->data, - pkt_len, 0); + pkt_len); skb_put(skb, pkt_len); pci_dma_sync_single_for_device(rp->pdev, rp->rx_skbuff_dma[entry], @@ -1568,7 +1520,11 @@ static void rhine_rx(struct net_device *dev) PCI_DMA_FROMDEVICE); } skb->protocol = eth_type_trans(skb, dev); +#ifdef CONFIG_VIA_RHINE_NAPI + netif_receive_skb(skb); +#else netif_rx(skb); +#endif dev->last_rx = jiffies; rp->stats.rx_bytes += pkt_len; rp->stats.rx_packets++; @@ -1595,6 +1551,8 @@ static void rhine_rx(struct net_device *dev) } rp->rx_ring[entry].rx_status = cpu_to_le32(DescOwn); } + + return count; } /* @@ -1725,9 +1683,6 @@ static void rhine_set_rx_mode(struct net_device *dev) u8 rx_mode; /* Note: 0x02=accept runt, 0x01=accept errs */ if (dev->flags & IFF_PROMISC) { /* Set promiscuous. */ - /* Unconditionally log net taps. */ - printk(KERN_NOTICE "%s: Promiscuous mode enabled.\n", - dev->name); rx_mode = 0x1C; iowrite32(0xffffffff, ioaddr + MulticastFilter0); iowrite32(0xffffffff, ioaddr + MulticastFilter1); @@ -1845,7 +1800,7 @@ static int rhine_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol) return 0; } -static struct ethtool_ops netdev_ethtool_ops = { +static const struct ethtool_ops netdev_ethtool_ops = { .get_drvinfo = netdev_get_drvinfo, .get_settings = netdev_get_settings, .set_settings = netdev_set_settings, @@ -1855,9 +1810,6 @@ static struct ethtool_ops netdev_ethtool_ops = { .set_msglevel = netdev_set_msglevel, .get_wol = rhine_get_wol, .set_wol = rhine_set_wol, - .get_sg = ethtool_op_get_sg, - .get_tx_csum = ethtool_op_get_tx_csum, - .get_perm_addr = ethtool_op_get_perm_addr, }; static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) @@ -1884,6 +1836,9 @@ static int rhine_close(struct net_device *dev) spin_lock_irq(&rp->lock); netif_stop_queue(dev); +#ifdef CONFIG_VIA_RHINE_NAPI + napi_disable(&rp->napi); +#endif if (debug > 1) printk(KERN_DEBUG "%s: Shutting down ethercard, " @@ -1938,7 +1893,7 @@ static void rhine_shutdown (struct pci_dev *pdev) /* Make sure we use pattern 0, 1 and not 4, 5 */ if (rp->quirks & rq6patterns) - iowrite8(0x04, ioaddr + 0xA7); + iowrite8(0x04, ioaddr + WOLcgClr); if (rp->wolopts & WAKE_MAGIC) { iowrite8(WOLmagic, ioaddr + WOLcrSet); @@ -1965,7 +1920,8 @@ static void rhine_shutdown (struct pci_dev *pdev) } /* Hit power state D3 (sleep) */ - iowrite8(ioread8(ioaddr + StickyHW) | 0x03, ioaddr + StickyHW); + if (!avoid_D3) + iowrite8(ioread8(ioaddr + StickyHW) | 0x03, ioaddr + StickyHW); /* TODO: Check use of pci_enable_wake() */ @@ -1981,6 +1937,9 @@ static int rhine_suspend(struct pci_dev *pdev, pm_message_t state) if (!netif_running(dev)) return 0; +#ifdef CONFIG_VIA_RHINE_NAPI + napi_disable(&rp->napi); +#endif netif_device_detach(dev); pci_save_state(pdev); @@ -2002,7 +1961,7 @@ static int rhine_resume(struct pci_dev *pdev) if (!netif_running(dev)) return 0; - if (request_irq(dev->irq, rhine_interrupt, SA_SHIRQ, dev->name, dev)) + if (request_irq(dev->irq, rhine_interrupt, IRQF_SHARED, dev->name, dev)) printk(KERN_ERR "via-rhine %s: request_irq failed\n", dev->name); ret = pci_set_power_state(pdev, PCI_D0); @@ -2042,6 +2001,23 @@ static struct pci_driver rhine_driver = { .shutdown = rhine_shutdown, }; +static struct dmi_system_id __initdata rhine_dmi_table[] = { + { + .ident = "EPIA-M", + .matches = { + DMI_MATCH(DMI_BIOS_VENDOR, "Award Software International, Inc."), + DMI_MATCH(DMI_BIOS_VERSION, "6.00 PG"), + }, + }, + { + .ident = "KV7", + .matches = { + DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies, LTD"), + DMI_MATCH(DMI_BIOS_VERSION, "6.00 PG"), + }, + }, + { NULL } +}; static int __init rhine_init(void) { @@ -2049,7 +2025,17 @@ static int __init rhine_init(void) #ifdef MODULE printk(version); #endif - return pci_module_init(&rhine_driver); + if (dmi_check_system(rhine_dmi_table)) { + /* these BIOSes fail at PXE boot if chip is in D3 */ + avoid_D3 = 1; + printk(KERN_WARNING "%s: Broken BIOS detected, avoid_D3 " + "enabled.\n", + DRV_NAME); + } + else if (avoid_D3) + printk(KERN_INFO "%s: avoid_D3 set.\n", DRV_NAME); + + return pci_register_driver(&rhine_driver); }