X-Git-Url: http://ftp.safe.ca/?a=blobdiff_plain;f=drivers%2Fnet%2Fcris%2Feth_v10.c;h=c9309eadebc1d8ad3a2e8eb3e9ec6f523d5c444a;hb=4cd24eaf0c6ee7f0242e34ee77ec899f255e66b5;hp=0eb1f8787ed740ddf72c9fc8e3f0c10e5f54e8c6;hpb=1fb9df5d3069064c037c81c0ab8bf783ffa5e373;p=safe%2Fjmp%2Flinux-2.6 diff --git a/drivers/net/cris/eth_v10.c b/drivers/net/cris/eth_v10.c index 0eb1f87..c9309ea 100644 --- a/drivers/net/cris/eth_v10.c +++ b/drivers/net/cris/eth_v10.c @@ -1,228 +1,16 @@ -/* $Id: ethernet.c,v 1.31 2004/10/18 14:49:03 starvik Exp $ - * +/* * e100net.c: A network driver for the ETRAX 100LX network controller. * * Copyright (c) 1998-2002 Axis Communications AB. * * The outline of this driver comes from skeleton.c. * - * $Log: ethernet.c,v $ - * Revision 1.31 2004/10/18 14:49:03 starvik - * Use RX interrupt as random source - * - * Revision 1.30 2004/09/29 10:44:04 starvik - * Enabed MAC-address output again - * - * Revision 1.29 2004/08/24 07:14:05 starvik - * Make use of generic MDIO interface and constants. - * - * Revision 1.28 2004/08/20 09:37:11 starvik - * Added support for Intel LXT972A. Creds to Randy Scarborough. - * - * Revision 1.27 2004/08/16 12:37:22 starvik - * Merge of Linux 2.6.8 - * - * Revision 1.25 2004/06/21 10:29:57 starvik - * Merge of Linux 2.6.7 - * - * Revision 1.23 2004/06/09 05:29:22 starvik - * Avoid any race where R_DMA_CH1_FIRST is NULL (may trigger cache bug). - * - * Revision 1.22 2004/05/14 07:58:03 starvik - * Merge of changes from 2.4 - * - * Revision 1.20 2004/03/11 11:38:40 starvik - * Merge of Linux 2.6.4 - * - * Revision 1.18 2003/12/03 13:45:46 starvik - * Use hardware pad for short packets to prevent information leakage. - * - * Revision 1.17 2003/07/04 08:27:37 starvik - * Merge of Linux 2.5.74 - * - * Revision 1.16 2003/04/24 08:28:22 starvik - * New LED behaviour: LED off when no link - * - * Revision 1.15 2003/04/09 05:20:47 starvik - * Merge of Linux 2.5.67 - * - * Revision 1.13 2003/03/06 16:11:01 henriken - * Off by one error in group address register setting. - * - * Revision 1.12 2003/02/27 17:24:19 starvik - * Corrected Rev to Revision - * - * Revision 1.11 2003/01/24 09:53:21 starvik - * Oops. Initialize GA to 0, not to 1 - * - * Revision 1.10 2003/01/24 09:50:55 starvik - * Initialize GA_0 and GA_1 to 0 to avoid matching of unwanted packets - * - * Revision 1.9 2002/12/13 07:40:58 starvik - * Added basic ethtool interface - * Handled out of memory when allocating new buffers - * - * Revision 1.8 2002/12/11 13:13:57 starvik - * Added arch/ to v10 specific includes - * Added fix from Linux 2.4 in serial.c (flush_to_flip_buffer) - * - * Revision 1.7 2002/11/26 09:41:42 starvik - * Added e100_set_config (standard interface to set media type) - * Added protection against preemptive scheduling - * Added standard MII ioctls - * - * Revision 1.6 2002/11/21 07:18:18 starvik - * Timers must be initialized in 2.5.48 - * - * Revision 1.5 2002/11/20 11:56:11 starvik - * Merge of Linux 2.5.48 - * - * Revision 1.4 2002/11/18 07:26:46 starvik - * Linux 2.5 port of latest Linux 2.4 ethernet driver - * - * Revision 1.33 2002/10/02 20:16:17 hp - * SETF, SETS: Use underscored IO_x_ macros rather than incorrect token concatenation - * - * Revision 1.32 2002/09/16 06:05:58 starvik - * Align memory returned by dev_alloc_skb - * Moved handling of sent packets to interrupt to avoid reference counting problem - * - * Revision 1.31 2002/09/10 13:28:23 larsv - * Return -EINVAL for unknown ioctls to avoid confusing tools that tests - * for supported functionality by issuing special ioctls, i.e. wireless - * extensions. - * - * Revision 1.30 2002/05/07 18:50:08 johana - * Correct spelling in comments. - * - * Revision 1.29 2002/05/06 05:38:49 starvik - * Performance improvements: - * Large packets are not copied (breakpoint set to 256 bytes) - * The cache bug workaround is delayed until half of the receive list - * has been used - * Added transmit list - * Transmit interrupts are only enabled when transmit queue is full - * - * Revision 1.28.2.1 2002/04/30 08:15:51 starvik - * Performance improvements: - * Large packets are not copied (breakpoint set to 256 bytes) - * The cache bug workaround is delayed until half of the receive list - * has been used. - * Added transmit list - * Transmit interrupts are only enabled when transmit queue is full - * - * Revision 1.28 2002/04/22 11:47:21 johana - * Fix according to 2.4.19-pre7. time_after/time_before and - * missing end of comment. - * The patch has a typo for ethernet.c in e100_clear_network_leds(), - * that is fixed here. - * - * Revision 1.27 2002/04/12 11:55:11 bjornw - * Added TODO - * - * Revision 1.26 2002/03/15 17:11:02 bjornw - * Use prepare_rx_descriptor after the CPU has touched the receiving descs - * - * Revision 1.25 2002/03/08 13:07:53 bjornw - * Unnecessary spinlock removed - * - * Revision 1.24 2002/02/20 12:57:43 fredriks - * Replaced MIN() with min(). - * - * Revision 1.23 2002/02/20 10:58:14 fredriks - * Strip the Ethernet checksum (4 bytes) before forwarding a frame to upper layers. - * - * Revision 1.22 2002/01/30 07:48:22 matsfg - * Initiate R_NETWORK_TR_CTRL - * - * Revision 1.21 2001/11/23 11:54:49 starvik - * Added IFF_PROMISC and IFF_ALLMULTI handling in set_multicast_list - * Removed compiler warnings - * - * Revision 1.20 2001/11/12 19:26:00 pkj - * * Corrected e100_negotiate() to not assign half to current_duplex when - * it was supposed to compare them... - * * Cleaned up failure handling in e100_open(). - * * Fixed compiler warnings. - * - * Revision 1.19 2001/11/09 07:43:09 starvik - * Added full duplex support - * Added ioctl to set speed and duplex - * Clear LED timer only runs when LED is lit - * - * Revision 1.18 2001/10/03 14:40:43 jonashg - * Update rx_bytes counter. - * - * Revision 1.17 2001/06/11 12:43:46 olof - * Modified defines for network LED behavior - * - * Revision 1.16 2001/05/30 06:12:46 markusl - * TxDesc.next should not be set to NULL - * - * Revision 1.15 2001/05/29 10:27:04 markusl - * Updated after review remarks: - * +Use IO_EXTRACT - * +Handle underrun - * - * Revision 1.14 2001/05/29 09:20:14 jonashg - * Use driver name on printk output so one can tell which driver that complains. - * - * Revision 1.13 2001/05/09 12:35:59 johana - * Use DMA_NBR and IRQ_NBR defines from dma.h and irq.h - * - * Revision 1.12 2001/04/05 11:43:11 tobiasa - * Check dev before panic. - * - * Revision 1.11 2001/04/04 11:21:05 markusl - * Updated according to review remarks - * - * Revision 1.10 2001/03/26 16:03:06 bjornw - * Needs linux/config.h - * - * Revision 1.9 2001/03/19 14:47:48 pkj - * * Make sure there is always a pause after the network LEDs are - * changed so they will not look constantly lit during heavy traffic. - * * Always use HZ when setting times relative to jiffies. - * * Use LED_NETWORK_SET() when setting the network LEDs. - * - * Revision 1.8 2001/02/27 13:52:48 bjornw - * malloc.h -> slab.h - * - * Revision 1.7 2001/02/23 13:46:38 bjornw - * Spellling check - * - * Revision 1.6 2001/01/26 15:21:04 starvik - * Don't disable interrupts while reading MDIO registers (MDIO is slow) - * Corrected promiscuous mode - * Improved deallocation of IRQs ("ifconfig eth0 down" now works) - * - * Revision 1.5 2000/11/29 17:22:22 bjornw - * Get rid of the udword types legacy stuff - * - * Revision 1.4 2000/11/22 16:36:09 bjornw - * Please marketing by using the correct case when spelling Etrax. - * - * Revision 1.3 2000/11/21 16:43:04 bjornw - * Minor short->int change - * - * Revision 1.2 2000/11/08 14:27:57 bjornw - * 2.4 port - * - * Revision 1.1 2000/11/06 13:56:00 bjornw - * Verbatim copy of the 1.24 version of e100net.c from elinux - * - * Revision 1.24 2000/10/04 15:55:23 bjornw - * * Use virt_to_phys etc. for DMA addresses - * * Removed bogus CHECKSUM_UNNECESSARY - * - * */ #include #include -#include #include #include #include @@ -235,6 +23,7 @@ #include #include #include +#include #include #include @@ -243,14 +32,14 @@ #include #include -#include /* DMA and register descriptions */ -#include /* LED_* I/O functions */ +#include /* DMA and register descriptions */ +#include /* CRIS_LED_* I/O functions */ #include #include #include -#include #include #include +#include //#define ETHDEBUG #define D(x) @@ -280,6 +69,9 @@ struct net_local { * by this lock as well. */ spinlock_t lock; + + spinlock_t led_lock; /* Protect LED state */ + spinlock_t transceiver_lock; /* Protect transceiver state. */ }; typedef struct etrax_eth_descr @@ -296,8 +88,6 @@ struct transceiver_ops void (*check_duplex)(struct net_device* dev); }; -struct transceiver_ops* transceiver; - /* Duplex settings */ enum duplex { @@ -308,7 +98,7 @@ enum duplex /* Dma descriptors etc. */ -#define MAX_MEDIA_DATA_SIZE 1518 +#define MAX_MEDIA_DATA_SIZE 1522 #define MIN_PACKET_LEN 46 #define ETHER_HEAD_LEN 14 @@ -333,8 +123,8 @@ enum duplex /*Intel LXT972A specific*/ #define MDIO_INT_STATUS_REG_2 0x0011 -#define MDIO_INT_FULL_DUPLEX_IND ( 1 << 9 ) -#define MDIO_INT_SPEED ( 1 << 14 ) +#define MDIO_INT_FULL_DUPLEX_IND (1 << 9) +#define MDIO_INT_SPEED (1 << 14) /* Network flash constants */ #define NET_FLASH_TIME (HZ/50) /* 20 ms */ @@ -345,8 +135,8 @@ enum duplex #define NO_NETWORK_ACTIVITY 0 #define NETWORK_ACTIVITY 1 -#define NBR_OF_RX_DESC 64 -#define NBR_OF_TX_DESC 256 +#define NBR_OF_RX_DESC 32 +#define NBR_OF_TX_DESC 16 /* Large packets are sent directly to upper layers while small packets are */ /* copied (to reduce memory waste). The following constant decides the breakpoint */ @@ -368,7 +158,6 @@ enum duplex static etrax_eth_descr *myNextRxDesc; /* Points to the next descriptor to to be processed */ static etrax_eth_descr *myLastRxDesc; /* The last processed descriptor */ -static etrax_eth_descr *myPrevRxDesc; /* The descriptor right before myNextRxDesc */ static etrax_eth_descr RxDescList[NBR_OF_RX_DESC] __attribute__ ((aligned(32))); @@ -378,7 +167,6 @@ static etrax_eth_descr* myNextTxDesc; /* Next descriptor to use */ static etrax_eth_descr TxDescList[NBR_OF_TX_DESC] __attribute__ ((aligned(32))); static unsigned int network_rec_config_shadow = 0; -static unsigned int mdio_phy_addr; /* Transciever address */ static unsigned int network_tr_ctrl_shadow = 0; @@ -403,8 +191,8 @@ static int etrax_ethernet_init(void); static int e100_open(struct net_device *dev); static int e100_set_mac_address(struct net_device *dev, void *addr); static int e100_send_packet(struct sk_buff *skb, struct net_device *dev); -static irqreturn_t e100rxtx_interrupt(int irq, void *dev_id, struct pt_regs *regs); -static irqreturn_t e100nw_interrupt(int irq, void *dev_id, struct pt_regs *regs); +static irqreturn_t e100rxtx_interrupt(int irq, void *dev_id); +static irqreturn_t e100nw_interrupt(int irq, void *dev_id); static void e100_rx(struct net_device *dev); static int e100_close(struct net_device *dev); static int e100_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd); @@ -412,7 +200,7 @@ static int e100_set_config(struct net_device* dev, struct ifmap* map); static void e100_tx_timeout(struct net_device *dev); static struct net_device_stats *e100_get_stats(struct net_device *dev); static void set_multicast_list(struct net_device *dev); -static void e100_hardware_send_packet(char *buf, int length); +static void e100_hardware_send_packet(struct net_local* np, char *buf, int length); static void update_rx_stats(struct net_device_stats *); static void update_tx_stats(struct net_device_stats *); static int e100_probe_transceiver(struct net_device* dev); @@ -434,8 +222,11 @@ static void e100_reset_transceiver(struct net_device* net); static void e100_clear_network_leds(unsigned long dummy); static void e100_set_network_leds(int active); -static struct ethtool_ops e100_ethtool_ops; - +static const struct ethtool_ops e100_ethtool_ops; +#if defined(CONFIG_ETRAX_NO_PHY) +static void dummy_check_speed(struct net_device* dev); +static void dummy_check_duplex(struct net_device* dev); +#else static void broadcom_check_speed(struct net_device* dev); static void broadcom_check_duplex(struct net_device* dev); static void tdk_check_speed(struct net_device* dev); @@ -444,14 +235,43 @@ static void intel_check_speed(struct net_device* dev); static void intel_check_duplex(struct net_device* dev); static void generic_check_speed(struct net_device* dev); static void generic_check_duplex(struct net_device* dev); +#endif +#ifdef CONFIG_NET_POLL_CONTROLLER +static void e100_netpoll(struct net_device* dev); +#endif + +static int autoneg_normal = 1; struct transceiver_ops transceivers[] = { +#if defined(CONFIG_ETRAX_NO_PHY) + {0x0000, dummy_check_speed, dummy_check_duplex} /* Dummy */ +#else {0x1018, broadcom_check_speed, broadcom_check_duplex}, /* Broadcom */ {0xC039, tdk_check_speed, tdk_check_duplex}, /* TDK 2120 */ {0x039C, tdk_check_speed, tdk_check_duplex}, /* TDK 2120C */ {0x04de, intel_check_speed, intel_check_duplex}, /* Intel LXT972A*/ {0x0000, generic_check_speed, generic_check_duplex} /* Generic, must be last */ +#endif +}; + +struct transceiver_ops* transceiver = &transceivers[0]; + +static const struct net_device_ops e100_netdev_ops = { + .ndo_open = e100_open, + .ndo_stop = e100_close, + .ndo_start_xmit = e100_send_packet, + .ndo_tx_timeout = e100_tx_timeout, + .ndo_get_stats = e100_get_stats, + .ndo_set_multicast_list = set_multicast_list, + .ndo_do_ioctl = e100_ioctl, + .ndo_set_mac_address = e100_set_mac_address, + .ndo_validate_addr = eth_validate_addr, + .ndo_change_mtu = eth_change_mtu, + .ndo_set_config = e100_set_config, +#ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = e100_netpoll, +#endif }; #define tx_done(dev) (*R_DMA_CH0_CMD == 0) @@ -472,14 +292,22 @@ etrax_ethernet_init(void) int i, err; printk(KERN_INFO - "ETRAX 100LX 10/100MBit ethernet v2.0 (c) 2000-2003 Axis Communications AB\n"); + "ETRAX 100LX 10/100MBit ethernet v2.0 (c) 1998-2007 Axis Communications AB\n"); - dev = alloc_etherdev(sizeof(struct net_local)); - np = dev->priv; + if (cris_request_io_interface(if_eth, cardname)) { + printk(KERN_CRIT "etrax_ethernet_init failed to get IO interface\n"); + return -EBUSY; + } + dev = alloc_etherdev(sizeof(struct net_local)); if (!dev) return -ENOMEM; + np = netdev_priv(dev); + + /* we do our own locking */ + dev->features |= NETIF_F_LLTX; + dev->base_addr = (unsigned int)R_NETWORK_SA_0; /* just to have something to show */ /* now setup our etrax specific stuff */ @@ -489,26 +317,25 @@ etrax_ethernet_init(void) /* fill in our handlers so the network layer can talk to us in the future */ - dev->open = e100_open; - dev->hard_start_xmit = e100_send_packet; - dev->stop = e100_close; - dev->get_stats = e100_get_stats; - dev->set_multicast_list = set_multicast_list; - dev->set_mac_address = e100_set_mac_address; dev->ethtool_ops = &e100_ethtool_ops; - dev->do_ioctl = e100_ioctl; - dev->set_config = e100_set_config; - dev->tx_timeout = e100_tx_timeout; + dev->netdev_ops = &e100_netdev_ops; + + spin_lock_init(&np->lock); + spin_lock_init(&np->led_lock); + spin_lock_init(&np->transceiver_lock); /* Initialise the list of Etrax DMA-descriptors */ /* Initialise receive descriptors */ for (i = 0; i < NBR_OF_RX_DESC; i++) { - /* Allocate two extra cachelines to make sure that buffer used by DMA - * does not share cacheline with any other data (to avoid cache bug) + /* Allocate two extra cachelines to make sure that buffer used + * by DMA does not share cacheline with any other data (to + * avoid cache bug) */ RxDescList[i].skb = dev_alloc_skb(MAX_MEDIA_DATA_SIZE + 2 * L1_CACHE_BYTES); + if (!RxDescList[i].skb) + return -ENOMEM; RxDescList[i].descr.ctrl = 0; RxDescList[i].descr.sw_len = MAX_MEDIA_DATA_SIZE; RxDescList[i].descr.next = virt_to_phys(&RxDescList[i + 1]); @@ -540,7 +367,6 @@ etrax_ethernet_init(void) myNextRxDesc = &RxDescList[0]; myLastRxDesc = &RxDescList[NBR_OF_RX_DESC - 1]; - myPrevRxDesc = &RxDescList[NBR_OF_RX_DESC - 1]; myFirstTxDesc = &TxDescList[0]; myNextTxDesc = &TxDescList[0]; myLastTxDesc = &TxDescList[NBR_OF_TX_DESC - 1]; @@ -561,10 +387,11 @@ etrax_ethernet_init(void) current_speed = 10; current_speed_selection = 0; /* Auto */ speed_timer.expires = jiffies + NET_LINK_UP_CHECK_INTERVAL; - duplex_timer.data = (unsigned long)dev; + speed_timer.data = (unsigned long)dev; speed_timer.function = e100_check_speed; clear_led_timer.function = e100_clear_network_leds; + clear_led_timer.data = (unsigned long)dev; full_duplex = 0; current_duplex = autoneg; @@ -573,7 +400,6 @@ etrax_ethernet_init(void) duplex_timer.function = e100_check_duplex; /* Initialize mii interface */ - np->mii_if.phy_id = mdio_phy_addr; np->mii_if.phy_id_mask = 0x1f; np->mii_if.reg_num_mask = 0x1f; np->mii_if.dev = dev; @@ -584,6 +410,9 @@ etrax_ethernet_init(void) /* unwanted addresses are matched */ *R_NETWORK_GA_0 = 0x00000000; *R_NETWORK_GA_1 = 0x00000000; + + /* Initialize next time the led can flash */ + led_next_time = jiffies; return 0; } @@ -594,9 +423,8 @@ etrax_ethernet_init(void) static int e100_set_mac_address(struct net_device *dev, void *p) { - struct net_local *np = (struct net_local *)dev->priv; + struct net_local *np = netdev_priv(dev); struct sockaddr *addr = p; - int i; spin_lock(&np->lock); /* preemption protection */ @@ -617,12 +445,7 @@ e100_set_mac_address(struct net_device *dev, void *p) /* show it in the log as well */ - printk(KERN_INFO "%s: changed MAC to ", dev->name); - - for (i = 0; i < 5; i++) - printk("%02X:", dev->dev_addr[i]); - - printk("%02X\n", dev->dev_addr[i]); + printk(KERN_INFO "%s: changed MAC to %pM\n", dev->name, dev->dev_addr); spin_unlock(&np->lock); @@ -689,6 +512,25 @@ e100_open(struct net_device *dev) goto grace_exit2; } + /* + * Always allocate the DMA channels after the IRQ, + * and clean up on failure. + */ + + if (cris_request_dma(NETWORK_TX_DMA_NBR, + cardname, + DMA_VERBOSE_ON_ERROR, + dma_eth)) { + goto grace_exit3; + } + + if (cris_request_dma(NETWORK_RX_DMA_NBR, + cardname, + DMA_VERBOSE_ON_ERROR, + dma_eth)) { + goto grace_exit4; + } + /* give the HW an idea of what MAC address we want */ *R_NETWORK_SA_0 = dev->dev_addr[0] | (dev->dev_addr[1] << 8) | @@ -703,6 +545,7 @@ e100_open(struct net_device *dev) *R_NETWORK_REC_CONFIG = 0xd; /* broadcast rec, individ. rec, ma0 enabled */ #else + SETS(network_rec_config_shadow, R_NETWORK_REC_CONFIG, max_size, size1522); SETS(network_rec_config_shadow, R_NETWORK_REC_CONFIG, broadcast, receive); SETS(network_rec_config_shadow, R_NETWORK_REC_CONFIG, ma0, enable); SETF(network_rec_config_shadow, R_NETWORK_REC_CONFIG, duplex, full_duplex); @@ -722,8 +565,7 @@ e100_open(struct net_device *dev) SETS(network_tr_ctrl_shadow, R_NETWORK_TR_CTRL, crc, enable); *R_NETWORK_TR_CTRL = network_tr_ctrl_shadow; - save_flags(flags); - cli(); + local_irq_save(flags); /* enable the irq's for ethernet DMA */ @@ -755,12 +597,13 @@ e100_open(struct net_device *dev) *R_DMA_CH0_FIRST = 0; *R_DMA_CH0_DESCR = virt_to_phys(myLastTxDesc); + netif_start_queue(dev); - restore_flags(flags); + local_irq_restore(flags); /* Probe for transceiver */ if (e100_probe_transceiver(dev)) - goto grace_exit3; + goto grace_exit5; /* Start duplex/speed timers */ add_timer(&speed_timer); @@ -769,10 +612,14 @@ e100_open(struct net_device *dev) /* We are now ready to accept transmit requeusts from * the queueing layer of the networking. */ - netif_start_queue(dev); + netif_carrier_on(dev); return 0; +grace_exit5: + cris_free_dma(NETWORK_RX_DMA_NBR, cardname); +grace_exit4: + cris_free_dma(NETWORK_TX_DMA_NBR, cardname); grace_exit3: free_irq(NETWORK_STATUS_IRQ_NBR, (void *)dev); grace_exit2: @@ -783,12 +630,20 @@ grace_exit0: return -EAGAIN; } - +#if defined(CONFIG_ETRAX_NO_PHY) +static void +dummy_check_speed(struct net_device* dev) +{ + current_speed = 100; +} +#else static void generic_check_speed(struct net_device* dev) { unsigned long data; - data = e100_get_mdio_reg(dev, mdio_phy_addr, MII_ADVERTISE); + struct net_local *np = netdev_priv(dev); + + data = e100_get_mdio_reg(dev, np->mii_if.phy_id, MII_ADVERTISE); if ((data & ADVERTISE_100FULL) || (data & ADVERTISE_100HALF)) current_speed = 100; @@ -800,7 +655,10 @@ static void tdk_check_speed(struct net_device* dev) { unsigned long data; - data = e100_get_mdio_reg(dev, mdio_phy_addr, MDIO_TDK_DIAGNOSTIC_REG); + struct net_local *np = netdev_priv(dev); + + data = e100_get_mdio_reg(dev, np->mii_if.phy_id, + MDIO_TDK_DIAGNOSTIC_REG); current_speed = (data & MDIO_TDK_DIAGNOSTIC_RATE ? 100 : 10); } @@ -808,7 +666,10 @@ static void broadcom_check_speed(struct net_device* dev) { unsigned long data; - data = e100_get_mdio_reg(dev, mdio_phy_addr, MDIO_AUX_CTRL_STATUS_REG); + struct net_local *np = netdev_priv(dev); + + data = e100_get_mdio_reg(dev, np->mii_if.phy_id, + MDIO_AUX_CTRL_STATUS_REG); current_speed = (data & MDIO_BC_SPEED ? 100 : 10); } @@ -816,46 +677,62 @@ static void intel_check_speed(struct net_device* dev) { unsigned long data; - data = e100_get_mdio_reg(dev, mdio_phy_addr, MDIO_INT_STATUS_REG_2); + struct net_local *np = netdev_priv(dev); + + data = e100_get_mdio_reg(dev, np->mii_if.phy_id, + MDIO_INT_STATUS_REG_2); current_speed = (data & MDIO_INT_SPEED ? 100 : 10); } - +#endif static void e100_check_speed(unsigned long priv) { struct net_device* dev = (struct net_device*)priv; + struct net_local *np = netdev_priv(dev); static int led_initiated = 0; unsigned long data; int old_speed = current_speed; - data = e100_get_mdio_reg(dev, mdio_phy_addr, MII_BMSR); + spin_lock(&np->transceiver_lock); + + data = e100_get_mdio_reg(dev, np->mii_if.phy_id, MII_BMSR); if (!(data & BMSR_LSTATUS)) { current_speed = 0; } else { transceiver->check_speed(dev); } + spin_lock(&np->led_lock); if ((old_speed != current_speed) || !led_initiated) { led_initiated = 1; e100_set_network_leds(NO_NETWORK_ACTIVITY); + if (current_speed) + netif_carrier_on(dev); + else + netif_carrier_off(dev); } + spin_unlock(&np->led_lock); /* Reinitialize the timer. */ speed_timer.expires = jiffies + NET_LINK_UP_CHECK_INTERVAL; add_timer(&speed_timer); + + spin_unlock(&np->transceiver_lock); } static void e100_negotiate(struct net_device* dev) { - unsigned short data = e100_get_mdio_reg(dev, mdio_phy_addr, MII_ADVERTISE); + struct net_local *np = netdev_priv(dev); + unsigned short data = e100_get_mdio_reg(dev, np->mii_if.phy_id, + MII_ADVERTISE); /* Discard old speed and duplex settings */ data &= ~(ADVERTISE_100HALF | ADVERTISE_100FULL | ADVERTISE_10HALF | ADVERTISE_10FULL); switch (current_speed_selection) { - case 10 : + case 10: if (current_duplex == full) data |= ADVERTISE_10FULL; else if (current_duplex == half) @@ -864,7 +741,7 @@ e100_negotiate(struct net_device* dev) data |= ADVERTISE_10HALF | ADVERTISE_10FULL; break; - case 100 : + case 100: if (current_duplex == full) data |= ADVERTISE_100FULL; else if (current_duplex == half) @@ -873,7 +750,7 @@ e100_negotiate(struct net_device* dev) data |= ADVERTISE_100HALF | ADVERTISE_100FULL; break; - case 0 : /* Auto */ + case 0: /* Auto */ if (current_duplex == full) data |= ADVERTISE_100FULL | ADVERTISE_10FULL; else if (current_duplex == half) @@ -883,35 +760,58 @@ e100_negotiate(struct net_device* dev) ADVERTISE_100HALF | ADVERTISE_100FULL; break; - default : /* assume autoneg speed and duplex */ + default: /* assume autoneg speed and duplex */ data |= ADVERTISE_10HALF | ADVERTISE_10FULL | ADVERTISE_100HALF | ADVERTISE_100FULL; + break; } - e100_set_mdio_reg(dev, mdio_phy_addr, MII_ADVERTISE, data); + e100_set_mdio_reg(dev, np->mii_if.phy_id, MII_ADVERTISE, data); + + data = e100_get_mdio_reg(dev, np->mii_if.phy_id, MII_BMCR); + if (autoneg_normal) { + /* Renegotiate with link partner */ + data |= BMCR_ANENABLE | BMCR_ANRESTART; + } else { + /* Don't negotiate speed or duplex */ + data &= ~(BMCR_ANENABLE | BMCR_ANRESTART); - /* Renegotiate with link partner */ - data = e100_get_mdio_reg(dev, mdio_phy_addr, MII_BMCR); - data |= BMCR_ANENABLE | BMCR_ANRESTART; + /* Set speed and duplex static */ + if (current_speed_selection == 10) + data &= ~BMCR_SPEED100; + else + data |= BMCR_SPEED100; - e100_set_mdio_reg(dev, mdio_phy_addr, MII_BMCR, data); + if (current_duplex != full) + data &= ~BMCR_FULLDPLX; + else + data |= BMCR_FULLDPLX; + } + e100_set_mdio_reg(dev, np->mii_if.phy_id, MII_BMCR, data); } static void e100_set_speed(struct net_device* dev, unsigned long speed) { + struct net_local *np = netdev_priv(dev); + + spin_lock(&np->transceiver_lock); if (speed != current_speed_selection) { current_speed_selection = speed; e100_negotiate(dev); } + spin_unlock(&np->transceiver_lock); } static void e100_check_duplex(unsigned long priv) { struct net_device *dev = (struct net_device *)priv; - struct net_local *np = (struct net_local *)dev->priv; - int old_duplex = full_duplex; + struct net_local *np = netdev_priv(dev); + int old_duplex; + + spin_lock(&np->transceiver_lock); + old_duplex = full_duplex; transceiver->check_duplex(dev); if (old_duplex != full_duplex) { /* Duplex changed */ @@ -923,13 +823,22 @@ e100_check_duplex(unsigned long priv) duplex_timer.expires = jiffies + NET_DUPLEX_CHECK_INTERVAL; add_timer(&duplex_timer); np->mii_if.full_duplex = full_duplex; + spin_unlock(&np->transceiver_lock); } - +#if defined(CONFIG_ETRAX_NO_PHY) +static void +dummy_check_duplex(struct net_device* dev) +{ + full_duplex = 1; +} +#else static void generic_check_duplex(struct net_device* dev) { unsigned long data; - data = e100_get_mdio_reg(dev, mdio_phy_addr, MII_ADVERTISE); + struct net_local *np = netdev_priv(dev); + + data = e100_get_mdio_reg(dev, np->mii_if.phy_id, MII_ADVERTISE); if ((data & ADVERTISE_10FULL) || (data & ADVERTISE_100FULL)) full_duplex = 1; @@ -941,7 +850,10 @@ static void tdk_check_duplex(struct net_device* dev) { unsigned long data; - data = e100_get_mdio_reg(dev, mdio_phy_addr, MDIO_TDK_DIAGNOSTIC_REG); + struct net_local *np = netdev_priv(dev); + + data = e100_get_mdio_reg(dev, np->mii_if.phy_id, + MDIO_TDK_DIAGNOSTIC_REG); full_duplex = (data & MDIO_TDK_DIAGNOSTIC_DPLX) ? 1 : 0; } @@ -949,7 +861,10 @@ static void broadcom_check_duplex(struct net_device* dev) { unsigned long data; - data = e100_get_mdio_reg(dev, mdio_phy_addr, MDIO_AUX_CTRL_STATUS_REG); + struct net_local *np = netdev_priv(dev); + + data = e100_get_mdio_reg(dev, np->mii_if.phy_id, + MDIO_AUX_CTRL_STATUS_REG); full_duplex = (data & MDIO_BC_FULL_DUPLEX_IND) ? 1 : 0; } @@ -957,38 +872,55 @@ static void intel_check_duplex(struct net_device* dev) { unsigned long data; - data = e100_get_mdio_reg(dev, mdio_phy_addr, MDIO_INT_STATUS_REG_2); + struct net_local *np = netdev_priv(dev); + + data = e100_get_mdio_reg(dev, np->mii_if.phy_id, + MDIO_INT_STATUS_REG_2); full_duplex = (data & MDIO_INT_FULL_DUPLEX_IND) ? 1 : 0; } - +#endif static void e100_set_duplex(struct net_device* dev, enum duplex new_duplex) { + struct net_local *np = netdev_priv(dev); + + spin_lock(&np->transceiver_lock); if (new_duplex != current_duplex) { current_duplex = new_duplex; e100_negotiate(dev); } + spin_unlock(&np->transceiver_lock); } static int e100_probe_transceiver(struct net_device* dev) { + int ret = 0; + +#if !defined(CONFIG_ETRAX_NO_PHY) unsigned int phyid_high; unsigned int phyid_low; unsigned int oui; struct transceiver_ops* ops = NULL; + struct net_local *np = netdev_priv(dev); + + spin_lock(&np->transceiver_lock); /* Probe MDIO physical address */ - for (mdio_phy_addr = 0; mdio_phy_addr <= 31; mdio_phy_addr++) { - if (e100_get_mdio_reg(dev, mdio_phy_addr, MII_BMSR) != 0xffff) + for (np->mii_if.phy_id = 0; np->mii_if.phy_id <= 31; + np->mii_if.phy_id++) { + if (e100_get_mdio_reg(dev, + np->mii_if.phy_id, MII_BMSR) != 0xffff) break; } - if (mdio_phy_addr == 32) - return -ENODEV; + if (np->mii_if.phy_id == 32) { + ret = -ENODEV; + goto out; + } /* Get manufacturer */ - phyid_high = e100_get_mdio_reg(dev, mdio_phy_addr, MII_PHYSID1); - phyid_low = e100_get_mdio_reg(dev, mdio_phy_addr, MII_PHYSID2); + phyid_high = e100_get_mdio_reg(dev, np->mii_if.phy_id, MII_PHYSID1); + phyid_low = e100_get_mdio_reg(dev, np->mii_if.phy_id, MII_PHYSID2); oui = (phyid_high << 6) | (phyid_low >> 10); for (ops = &transceivers[0]; ops->oui; ops++) { @@ -996,8 +928,10 @@ e100_probe_transceiver(struct net_device* dev) break; } transceiver = ops; - - return 0; +out: + spin_unlock(&np->transceiver_lock); +#endif + return ret; } static int @@ -1091,13 +1025,14 @@ e100_receive_mdio_bit() static void e100_reset_transceiver(struct net_device* dev) { + struct net_local *np = netdev_priv(dev); unsigned short cmd; unsigned short data; int bitCounter; - data = e100_get_mdio_reg(dev, mdio_phy_addr, MII_BMCR); + data = e100_get_mdio_reg(dev, np->mii_if.phy_id, MII_BMCR); - cmd = (MDIO_START << 14) | (MDIO_WRITE << 12) | (mdio_phy_addr << 7) | (MII_BMCR << 2); + cmd = (MDIO_START << 14) | (MDIO_WRITE << 12) | (np->mii_if.phy_id << 7) | (MII_BMCR << 2); e100_send_mdio_cmd(cmd, 1); @@ -1115,7 +1050,7 @@ e100_reset_transceiver(struct net_device* dev) static void e100_tx_timeout(struct net_device *dev) { - struct net_local *np = (struct net_local *)dev->priv; + struct net_local *np = netdev_priv(dev); unsigned long flags; spin_lock_irqsave(&np->lock, flags); @@ -1137,8 +1072,7 @@ e100_tx_timeout(struct net_device *dev) e100_reset_transceiver(dev); /* and get rid of the packets that never got an interrupt */ - while (myFirstTxDesc != myNextTxDesc) - { + while (myFirstTxDesc != myNextTxDesc) { dev_kfree_skb(myFirstTxDesc->skb); myFirstTxDesc->skb = 0; myFirstTxDesc = phys_to_virt(myFirstTxDesc->descr.next); @@ -1164,7 +1098,7 @@ e100_tx_timeout(struct net_device *dev) static int e100_send_packet(struct sk_buff *skb, struct net_device *dev) { - struct net_local *np = (struct net_local *)dev->priv; + struct net_local *np = netdev_priv(dev); unsigned char *buf = skb->data; unsigned long flags; @@ -1177,7 +1111,7 @@ e100_send_packet(struct sk_buff *skb, struct net_device *dev) dev->trans_start = jiffies; - e100_hardware_send_packet(buf, skb->len); + e100_hardware_send_packet(np, buf, skb->len); myNextTxDesc = phys_to_virt(myNextTxDesc->descr.next); @@ -1188,7 +1122,7 @@ e100_send_packet(struct sk_buff *skb, struct net_device *dev) spin_unlock_irqrestore(&np->lock, flags); - return 0; + return NETDEV_TX_OK; } /* @@ -1197,16 +1131,18 @@ e100_send_packet(struct sk_buff *skb, struct net_device *dev) */ static irqreturn_t -e100rxtx_interrupt(int irq, void *dev_id, struct pt_regs * regs) +e100rxtx_interrupt(int irq, void *dev_id) { struct net_device *dev = (struct net_device *)dev_id; - struct net_local *np = (struct net_local *)dev->priv; - unsigned long irqbits = *R_IRQ_MASK2_RD; + struct net_local *np = netdev_priv(dev); + unsigned long irqbits; - /* Disable RX/TX IRQs to avoid reentrancy */ - *R_IRQ_MASK2_CLR = - IO_STATE(R_IRQ_MASK2_CLR, dma0_eop, clr) | - IO_STATE(R_IRQ_MASK2_CLR, dma1_eop, clr); + /* + * Note that both rx and tx interrupts are blocked at this point, + * regardless of which got us here. + */ + + irqbits = *R_IRQ_MASK2_RD; /* Handle received packets */ if (irqbits & IO_STATE(R_IRQ_MASK2_RD, dma1_eop, active)) { @@ -1222,7 +1158,7 @@ e100rxtx_interrupt(int irq, void *dev_id, struct pt_regs * regs) * allocate a new buffer to put a packet in. */ e100_rx(dev); - ((struct net_local *)dev->priv)->stats.rx_packets++; + np->stats.rx_packets++; /* restart/continue on the channel, for safety */ *R_DMA_CH1_CMD = IO_STATE(R_DMA_CH1_CMD, cmd, restart); /* clear dma channel 1 eop/descr irq bits */ @@ -1236,9 +1172,8 @@ e100rxtx_interrupt(int irq, void *dev_id, struct pt_regs * regs) } /* Report any packets that have been sent */ - while (myFirstTxDesc != phys_to_virt(*R_DMA_CH0_FIRST) && - myFirstTxDesc != myNextTxDesc) - { + while (virt_to_phys(myFirstTxDesc) != *R_DMA_CH0_FIRST && + (netif_queue_stopped(dev) || myFirstTxDesc != myNextTxDesc)) { np->stats.tx_bytes += myFirstTxDesc->skb->len; np->stats.tx_packets++; @@ -1247,27 +1182,23 @@ e100rxtx_interrupt(int irq, void *dev_id, struct pt_regs * regs) dev_kfree_skb_irq(myFirstTxDesc->skb); myFirstTxDesc->skb = 0; myFirstTxDesc = phys_to_virt(myFirstTxDesc->descr.next); + /* Wake up queue. */ + netif_wake_queue(dev); } if (irqbits & IO_STATE(R_IRQ_MASK2_RD, dma0_eop, active)) { - /* acknowledge the eop interrupt and wake up queue */ + /* acknowledge the eop interrupt. */ *R_DMA_CH0_CLR_INTR = IO_STATE(R_DMA_CH0_CLR_INTR, clr_eop, do); - netif_wake_queue(dev); } - /* Enable RX/TX IRQs again */ - *R_IRQ_MASK2_SET = - IO_STATE(R_IRQ_MASK2_SET, dma0_eop, set) | - IO_STATE(R_IRQ_MASK2_SET, dma1_eop, set); - return IRQ_HANDLED; } static irqreturn_t -e100nw_interrupt(int irq, void *dev_id, struct pt_regs * regs) +e100nw_interrupt(int irq, void *dev_id) { struct net_device *dev = (struct net_device *)dev_id; - struct net_local *np = (struct net_local *)dev->priv; + struct net_local *np = netdev_priv(dev); unsigned long irqbits = *R_IRQ_MASK0_RD; /* check for underrun irq */ @@ -1289,7 +1220,6 @@ e100nw_interrupt(int irq, void *dev_id, struct pt_regs * regs) SETS(network_tr_ctrl_shadow, R_NETWORK_TR_CTRL, clr_error, clr); *R_NETWORK_TR_CTRL = network_tr_ctrl_shadow; SETS(network_tr_ctrl_shadow, R_NETWORK_TR_CTRL, clr_error, nop); - *R_NETWORK_TR_CTRL = IO_STATE(R_NETWORK_TR_CTRL, clr_error, clr); np->stats.tx_errors++; D(printk("ethernet excessive collisions!\n")); } @@ -1302,12 +1232,13 @@ e100_rx(struct net_device *dev) { struct sk_buff *skb; int length = 0; - struct net_local *np = (struct net_local *)dev->priv; + struct net_local *np = netdev_priv(dev); unsigned char *skb_data_ptr; #ifdef ETHDEBUG int i; #endif - + etrax_eth_descr *prevRxDesc; /* The descriptor right before myNextRxDesc */ + spin_lock(&np->led_lock); if (!led_active && time_after(jiffies, led_next_time)) { /* light the network leds depending on the current speed. */ e100_set_network_leds(NETWORK_ACTIVITY); @@ -1317,9 +1248,10 @@ e100_rx(struct net_device *dev) led_active = 1; mod_timer(&clear_led_timer, jiffies + HZ/10); } + spin_unlock(&np->led_lock); length = myNextRxDesc->descr.hw_len - 4; - ((struct net_local *)dev->priv)->stats.rx_bytes += length; + np->stats.rx_bytes += length; #ifdef ETHDEBUG printk("Got a packet of length %d:\n", length); @@ -1339,7 +1271,7 @@ e100_rx(struct net_device *dev) if (!skb) { np->stats.rx_errors++; printk(KERN_NOTICE "%s: Memory squeeze, dropping packet.\n", dev->name); - return; + goto update_nextrxdesc; } skb_put(skb, length - ETHER_HEAD_LEN); /* allocate room for the packet body */ @@ -1347,7 +1279,8 @@ e100_rx(struct net_device *dev) #ifdef ETHDEBUG printk("head = 0x%x, data = 0x%x, tail = 0x%x, end = 0x%x\n", - skb->head, skb->data, skb->tail, skb->end); + skb->head, skb->data, skb_tail_pointer(skb), + skb_end_pointer(skb)); printk("copying packet to 0x%x.\n", skb_data_ptr); #endif @@ -1356,15 +1289,15 @@ e100_rx(struct net_device *dev) else { /* Large packet, send directly to upper layers and allocate new * memory (aligned to cache line boundary to avoid bug). - * Before sending the skb to upper layers we must make sure that - * skb->data points to the aligned start of the packet. + * Before sending the skb to upper layers we must make sure + * that skb->data points to the aligned start of the packet. */ int align; struct sk_buff *new_skb = dev_alloc_skb(MAX_MEDIA_DATA_SIZE + 2 * L1_CACHE_BYTES); if (!new_skb) { np->stats.rx_errors++; printk(KERN_NOTICE "%s: Memory squeeze, dropping packet.\n", dev->name); - return; + goto update_nextrxdesc; } skb = myNextRxDesc->skb; align = (int)phys_to_virt(myNextRxDesc->descr.buf) - (int)skb->data; @@ -1374,15 +1307,15 @@ e100_rx(struct net_device *dev) myNextRxDesc->descr.buf = L1_CACHE_ALIGN(virt_to_phys(myNextRxDesc->skb->data)); } - skb->dev = dev; skb->protocol = eth_type_trans(skb, dev); /* Send the packet to the upper layers */ netif_rx(skb); + update_nextrxdesc: /* Prepare for next packet */ myNextRxDesc->descr.status = 0; - myPrevRxDesc = myNextRxDesc; + prevRxDesc = myNextRxDesc; myNextRxDesc = phys_to_virt(myNextRxDesc->descr.next); rx_queue_len++; @@ -1390,9 +1323,9 @@ e100_rx(struct net_device *dev) /* Check if descriptors should be returned */ if (rx_queue_len == RX_QUEUE_THRESHOLD) { flush_etrax_cache(); - myPrevRxDesc->descr.ctrl |= d_eol; + prevRxDesc->descr.ctrl |= d_eol; myLastRxDesc->descr.ctrl &= ~d_eol; - myLastRxDesc = myPrevRxDesc; + myLastRxDesc = prevRxDesc; rx_queue_len = 0; } } @@ -1401,7 +1334,7 @@ e100_rx(struct net_device *dev) static int e100_close(struct net_device *dev) { - struct net_local *np = (struct net_local *)dev->priv; + struct net_local *np = netdev_priv(dev); printk(KERN_INFO "Closing %s.\n", dev->name); @@ -1429,6 +1362,9 @@ e100_close(struct net_device *dev) free_irq(NETWORK_DMA_TX_IRQ_NBR, (void *)dev); free_irq(NETWORK_STATUS_IRQ_NBR, (void *)dev); + cris_free_dma(NETWORK_TX_DMA_NBR, cardname); + cris_free_dma(NETWORK_RX_DMA_NBR, cardname); + /* Update the statistics here. */ update_rx_stats(&np->stats); @@ -1446,18 +1382,11 @@ e100_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) { struct mii_ioctl_data *data = if_mii(ifr); struct net_local *np = netdev_priv(dev); + int rc = 0; + int old_autoneg; spin_lock(&np->lock); /* Preempt protection */ switch (cmd) { - case SIOCGMIIPHY: /* Get PHY address */ - data->phy_id = mdio_phy_addr; - break; - case SIOCGMIIREG: /* Read MII register */ - data->val_out = e100_get_mdio_reg(dev, mdio_phy_addr, data->reg_num); - break; - case SIOCSMIIREG: /* Write MII register */ - e100_set_mdio_reg(dev, mdio_phy_addr, data->reg_num, data->val_in); - break; /* The ioctls below should be considered obsolete but are */ /* still present for compatability with old scripts/apps */ case SET_ETH_SPEED_10: /* 10 Mbps */ @@ -1466,60 +1395,47 @@ e100_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) case SET_ETH_SPEED_100: /* 100 Mbps */ e100_set_speed(dev, 100); break; - case SET_ETH_SPEED_AUTO: /* Auto negotiate speed */ + case SET_ETH_SPEED_AUTO: /* Auto-negotiate speed */ e100_set_speed(dev, 0); break; - case SET_ETH_DUPLEX_HALF: /* Half duplex. */ + case SET_ETH_DUPLEX_HALF: /* Half duplex */ e100_set_duplex(dev, half); break; - case SET_ETH_DUPLEX_FULL: /* Full duplex. */ + case SET_ETH_DUPLEX_FULL: /* Full duplex */ e100_set_duplex(dev, full); break; - case SET_ETH_DUPLEX_AUTO: /* Autonegotiate duplex*/ + case SET_ETH_DUPLEX_AUTO: /* Auto-negotiate duplex */ e100_set_duplex(dev, autoneg); break; + case SET_ETH_AUTONEG: + old_autoneg = autoneg_normal; + autoneg_normal = *(int*)data; + if (autoneg_normal != old_autoneg) + e100_negotiate(dev); + break; default: - return -EINVAL; + rc = generic_mii_ioctl(&np->mii_if, if_mii(ifr), + cmd, NULL); + break; } spin_unlock(&np->lock); - return 0; + return rc; } -static int e100_set_settings(struct net_device *dev, - struct ethtool_cmd *ecmd) +static int e100_get_settings(struct net_device *dev, + struct ethtool_cmd *cmd) { - ecmd->supported = SUPPORTED_Autoneg | SUPPORTED_TP | SUPPORTED_MII | - SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full | - SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full; - ecmd->port = PORT_TP; - ecmd->transceiver = XCVR_EXTERNAL; - ecmd->phy_address = mdio_phy_addr; - ecmd->speed = current_speed; - ecmd->duplex = full_duplex ? DUPLEX_FULL : DUPLEX_HALF; - ecmd->advertising = ADVERTISED_TP; + struct net_local *np = netdev_priv(dev); + int err; - if (current_duplex == autoneg && current_speed_selection == 0) - ecmd->advertising |= ADVERTISED_Autoneg; - else { - ecmd->advertising |= - ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full | - ADVERTISED_100baseT_Half | ADVERTISED_100baseT_Full; - if (current_speed_selection == 10) - ecmd->advertising &= ~(ADVERTISED_100baseT_Half | - ADVERTISED_100baseT_Full); - else if (current_speed_selection == 100) - ecmd->advertising &= ~(ADVERTISED_10baseT_Half | - ADVERTISED_10baseT_Full); - if (current_duplex == half) - ecmd->advertising &= ~(ADVERTISED_10baseT_Full | - ADVERTISED_100baseT_Full); - else if (current_duplex == full) - ecmd->advertising &= ~(ADVERTISED_10baseT_Half | - ADVERTISED_100baseT_Half); - } + spin_lock_irq(&np->lock); + err = mii_ethtool_gset(&np->mii_if, cmd); + spin_unlock_irq(&np->lock); - ecmd->autoneg = AUTONEG_ENABLE; - return 0; + /* The PHY may support 1000baseT, but the Etrax100 does not. */ + cmd->supported &= ~(SUPPORTED_1000baseT_Half + | SUPPORTED_1000baseT_Full); + return err; } static int e100_set_settings(struct net_device *dev, @@ -1552,7 +1468,7 @@ static int e100_nway_reset(struct net_device *dev) return 0; } -static struct ethtool_ops e100_ethtool_ops = { +static const struct ethtool_ops e100_ethtool_ops = { .get_settings = e100_get_settings, .set_settings = e100_set_settings, .get_drvinfo = e100_get_drvinfo, @@ -1563,7 +1479,8 @@ static struct ethtool_ops e100_ethtool_ops = { static int e100_set_config(struct net_device *dev, struct ifmap *map) { - struct net_local *np = (struct net_local *)dev->priv; + struct net_local *np = netdev_priv(dev); + spin_lock(&np->lock); /* Preempt protection */ switch(map->port) { @@ -1615,7 +1532,6 @@ update_tx_stats(struct net_device_stats *es) es->collisions += IO_EXTRACT(R_TR_COUNTERS, single_col, r) + IO_EXTRACT(R_TR_COUNTERS, multiple_col, r); - es->tx_errors += IO_EXTRACT(R_TR_COUNTERS, deferred, r); } /* @@ -1625,8 +1541,9 @@ update_tx_stats(struct net_device_stats *es) static struct net_device_stats * e100_get_stats(struct net_device *dev) { - struct net_local *lp = (struct net_local *)dev->priv; + struct net_local *lp = netdev_priv(dev); unsigned long flags; + spin_lock_irqsave(&lp->lock, flags); update_rx_stats(&lp->stats); @@ -1646,13 +1563,13 @@ e100_get_stats(struct net_device *dev) static void set_multicast_list(struct net_device *dev) { - struct net_local *lp = (struct net_local *)dev->priv; - int num_addr = dev->mc_count; + struct net_local *lp = netdev_priv(dev); + int num_addr = netdev_mc_count(dev); unsigned long int lo_bits; unsigned long int hi_bits; + spin_lock(&lp->lock); - if (dev->flags & IFF_PROMISC) - { + if (dev->flags & IFF_PROMISC) { /* promiscuous mode */ lo_bits = 0xfffffffful; hi_bits = 0xfffffffful; @@ -1682,9 +1599,10 @@ set_multicast_list(struct net_device *dev) struct dev_mc_list *dmi = dev->mc_list; int i; char *baddr; + lo_bits = 0x00000000ul; hi_bits = 0x00000000ul; - for (i=0; i= 32) { hi_bits |= (1 << (hash_ix-32)); - } - else { + } else { lo_bits |= (1 << hash_ix); } dmi = dmi->next; @@ -1727,10 +1644,11 @@ set_multicast_list(struct net_device *dev) } void -e100_hardware_send_packet(char *buf, int length) +e100_hardware_send_packet(struct net_local *np, char *buf, int length) { D(printk("e100 send pack, buf 0x%x len %d\n", buf, length)); + spin_lock(&np->led_lock); if (!led_active && time_after(jiffies, led_next_time)) { /* light the network leds depending on the current speed. */ e100_set_network_leds(NETWORK_ACTIVITY); @@ -1740,6 +1658,7 @@ e100_hardware_send_packet(char *buf, int length) led_active = 1; mod_timer(&clear_led_timer, jiffies + HZ/10); } + spin_unlock(&np->led_lock); /* configure the tx dma descriptor */ myNextTxDesc->descr.sw_len = length; @@ -1757,6 +1676,11 @@ e100_hardware_send_packet(char *buf, int length) static void e100_clear_network_leds(unsigned long dummy) { + struct net_device *dev = (struct net_device *)dummy; + struct net_local *np = netdev_priv(dev); + + spin_lock(&np->led_lock); + if (led_active && time_after(jiffies, led_next_time)) { e100_set_network_leds(NO_NETWORK_ACTIVITY); @@ -1764,6 +1688,8 @@ e100_clear_network_leds(unsigned long dummy) led_next_time = jiffies + NET_FLASH_PAUSE; led_active = 0; } + + spin_unlock(&np->led_lock); } static void @@ -1780,23 +1706,29 @@ e100_set_network_leds(int active) if (!current_speed) { /* Make LED red, link is down */ #if defined(CONFIG_ETRAX_NETWORK_RED_ON_NO_CONNECTION) - LED_NETWORK_SET(LED_RED); + CRIS_LED_NETWORK_SET(CRIS_LED_RED); #else - LED_NETWORK_SET(LED_OFF); + CRIS_LED_NETWORK_SET(CRIS_LED_OFF); #endif - } - else if (light_leds) { + } else if (light_leds) { if (current_speed == 10) { - LED_NETWORK_SET(LED_ORANGE); + CRIS_LED_NETWORK_SET(CRIS_LED_ORANGE); } else { - LED_NETWORK_SET(LED_GREEN); + CRIS_LED_NETWORK_SET(CRIS_LED_GREEN); } + } else { + CRIS_LED_NETWORK_SET(CRIS_LED_OFF); } - else { - LED_NETWORK_SET(LED_OFF); - } } +#ifdef CONFIG_NET_POLL_CONTROLLER +static void +e100_netpoll(struct net_device* netdev) +{ + e100rxtx_interrupt(NETWORK_DMA_TX_IRQ_NBR, netdev, NULL); +} +#endif + static int etrax_init_module(void) {