X-Git-Url: http://ftp.safe.ca/?a=blobdiff_plain;f=drivers%2Fnet%2FKconfig;h=e19ca4bb75102448879208df00d90aece5b8503b;hb=39acbc12affcaa23ef1d887ba3d197baca8e6e47;hp=9fe8cb7d43aca2ac3aa1fbec9e4b9102c4ff4b9b;hpb=68334115eecc2502426657a1449dd04b3572ae0d;p=safe%2Fjmp%2Flinux-2.6 diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 9fe8cb7..e19ca4b 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -1,4 +1,3 @@ - # # Network device configuration # @@ -210,7 +209,7 @@ config MII config MACB tristate "Atmel MACB support" - depends on AVR32 || ARCH_AT91SAM9260 || ARCH_AT91SAM9263 || ARCH_AT91SAM9G20 || ARCH_AT91CAP9 + depends on AVR32 || ARCH_AT91SAM9260 || ARCH_AT91SAM9263 || ARCH_AT91SAM9G20 || ARCH_AT91SAM9G45 || ARCH_AT91CAP9 select PHYLIB help The Atmel MACB ethernet interface is found on many AT32 and AT91 @@ -517,15 +516,16 @@ config STNIC config SH_ETH tristate "Renesas SuperH Ethernet support" depends on SUPERH && \ - (CPU_SUBTYPE_SH7710 || CPU_SUBTYPE_SH7712 || CPU_SUBTYPE_SH7763 || \ - CPU_SUBTYPE_SH7619) + (CPU_SUBTYPE_SH7710 || CPU_SUBTYPE_SH7712 || \ + CPU_SUBTYPE_SH7763 || CPU_SUBTYPE_SH7619 || \ + CPU_SUBTYPE_SH7724) select CRC32 select MII select MDIO_BITBANG select PHYLIB help Renesas SuperH Ethernet device driver. - This driver support SH7710, SH7712, SH7763 and SH7619. + This driver support SH7710, SH7712, SH7763, SH7619, and SH7724. config SUNLANCE tristate "Sun LANCE support" @@ -918,6 +918,16 @@ config NET_NETX To compile this driver as a module, choose M here. The module will be called netx-eth. +config TI_DAVINCI_EMAC + tristate "TI DaVinci EMAC Support" + depends on ARM && ARCH_DAVINCI + select PHYLIB + help + This driver supports TI's DaVinci Ethernet . + + To compile this driver as a module, choose M here: the module + will be called davinci_emac_driver. This is recommended. + config DM9000 tristate "DM9000 support" depends on ARM || BLACKFIN || MIPS @@ -963,6 +973,16 @@ config ENC28J60_WRITEVERIFY Enable the verify after the buffer write useful for debugging purpose. If unsure, say N. +config ETHOC + tristate "OpenCores 10/100 Mbps Ethernet MAC support" + depends on NET_ETHERNET && HAS_IOMEM + select MII + select PHYLIB + select CRC32 + select BITREVERSE + help + Say Y here if you want to use the OpenCores 10/100 Mbps Ethernet MAC. + config SMC911X tristate "SMSC LAN911[5678] support" select CRC32 @@ -981,7 +1001,7 @@ config SMC911X config SMSC911X tristate "SMSC LAN911x/LAN921x families embedded ethernet support" - depends on ARM || SUPERH + depends on ARM || SUPERH || BLACKFIN select CRC32 select MII select PHYLIB @@ -1040,6 +1060,17 @@ config NI65 To compile this driver as a module, choose M here. The module will be called ni65. +config DNET + tristate "Dave ethernet support (DNET)" + depends on NET_ETHERNET && HAS_IOMEM + select PHYLIB + help + The Dave ethernet interface (DNET) is found on Qong Board FPGA. + Say Y to include support for the DNET chip. + + To compile this driver as a module, choose M here: the module + will be called dnet. + source "drivers/net/tulip/Kconfig" config AT1700 @@ -1692,6 +1723,29 @@ config TLAN Please email feedback to . +config KS8842 + tristate "Micrel KSZ8842" + depends on HAS_IOMEM + help + This platform driver is for Micrel KSZ8842 / KS8842 + 2-port ethernet switch chip (managed, VLAN, QoS). + +config KS8851 + tristate "Micrel KS8851 SPI" + depends on SPI + select MII + select CRC32 + help + SPI driver for Micrel KS8851 SPI attached network chip. + +config KS8851_MLL + tristate "Micrel KS8851 MLL" + depends on HAS_IOMEM + select MII + help + This platform driver is for Micrel KS8851 Address/data bus + multiplexed network chip. + config VIA_RHINE tristate "VIA Rhine support" depends on NET_PCI && PCI @@ -1730,7 +1784,7 @@ config SC92031 config CPMAC tristate "TI AR7 CPMAC Ethernet support (EXPERIMENTAL)" - depends on NET_ETHERNET && EXPERIMENTAL && AR7 && BROKEN + depends on NET_ETHERNET && EXPERIMENTAL && AR7 select PHYLIB help TI AR7 CPMAC Ethernet support @@ -1828,11 +1882,11 @@ config 68360_ENET the Motorola 68360 processor. config FEC - bool "FEC ethernet controller (of ColdFire CPUs)" - depends on M523x || M527x || M5272 || M528x || M520x + bool "FEC ethernet controller (of ColdFire and some i.MX CPUs)" + depends on M523x || M527x || M5272 || M528x || M520x || M532x || MACH_MX27 || ARCH_MX35 || ARCH_MX25 help Say Y here if you want to use the built-in 10/100 Fast ethernet - controller on some Motorola ColdFire processors. + controller on some Motorola ColdFire and Freescale i.MX processors. config FEC2 bool "Second FEC ethernet controller (on some ColdFire CPUs)" @@ -1850,7 +1904,7 @@ config FEC_MPC52xx ---help--- This option enables support for the MPC5200's on-chip Fast Ethernet Controller - If compiled as module, it will be called 'fec_mpc52xx.ko'. + If compiled as module, it will be called fec_mpc52xx. config FEC_MPC52xx_MDIO bool "MPC52xx FEC MDIO bus driver" @@ -1862,7 +1916,7 @@ config FEC_MPC52xx_MDIO (Motorola? industry standard). If your board uses an external PHY connected to FEC, enable this. If not sure, enable. - If compiled as module, it will be called 'fec_mpc52xx_phy.ko'. + If compiled as module, it will be called fec_mpc52xx_phy. config NE_H8300 tristate "NE2000 compatible support for H8/300" @@ -1882,6 +1936,21 @@ config ATL2 To compile this driver as a module, choose M here. The module will be called atl2. +config XILINX_EMACLITE + tristate "Xilinx 10/100 Ethernet Lite support" + depends on PPC32 || MICROBLAZE + help + This driver supports the 10/100 Ethernet Lite from Xilinx. + +config BCM63XX_ENET + tristate "Broadcom 63xx internal mac support" + depends on BCM63XX + select MII + select PHYLIB + help + This driver supports the ethernet MACs in the Broadcom 63xx + MIPS chipset family (BCM63XX). + source "drivers/net/fs_enet/Kconfig" endif # NET_ETHERNET @@ -2019,15 +2088,6 @@ config IGB To compile this driver as a module, choose M here. The module will be called igb. -config IGB_LRO - bool "Use software LRO" - depends on IGB && INET - select INET_LRO - ---help--- - Say Y here if you want to use large receive offload. - - If in doubt, say N. - config IGB_DCA bool "Direct Cache Access (DCA) Support" default y @@ -2037,6 +2097,27 @@ config IGB_DCA driver. DCA is a method for warming the CPU cache before data is used, with the intent of lessening the impact of cache misses. +config IGBVF + tristate "Intel(R) 82576 Virtual Function Ethernet support" + depends on PCI + ---help--- + This driver supports Intel(R) 82576 virtual functions. For more + information on how to identify your adapter, go to the Adapter & + Driver ID Guide at: + + + + For general information and support, go to the Intel support + website at: + + + + More specific information on configuring the driver is in + . + + To compile this driver as a module, choose M here. The module + will be called igbvf. + source "drivers/net/ixp2000/Kconfig" config MYRI_SBUS @@ -2158,7 +2239,7 @@ config SKGE_DEBUG depends on SKGE && DEBUG_FS help This option adds the ability to dump driver state for debugging. - The file debugfs/skge/ethX displays the state of the internal + The file /sys/kernel/debug/skge/ethX displays the state of the internal transmit and receive rings. If unsure, say N. @@ -2184,7 +2265,7 @@ config SKY2_DEBUG depends on SKY2 && DEBUG_FS help This option adds the ability to dump driver state for debugging. - The file debugfs/sky2/ethX displays the state of the internal + The file /sys/kernel/debug/sky2/ethX displays the state of the internal transmit and receive rings. If unsure, say N. @@ -2215,13 +2296,25 @@ config BNX2 tristate "Broadcom NetXtremeII support" depends on PCI select CRC32 - select ZLIB_INFLATE + select FW_LOADER help This driver supports Broadcom NetXtremeII gigabit Ethernet cards. To compile this driver as a module, choose M here: the module will be called bnx2. This is recommended. +config CNIC + tristate "Broadcom CNIC support" + depends on PCI + select BNX2 + select UIO + help + This driver supports offload features of Broadcom NetXtremeII + gigabit Ethernet cards. + + To compile this driver as a module, choose M here: the module + will be called cnic. This is recommended. + config SPIDER_NET tristate "Spider Gigabit Ethernet driver" depends on PCI && (PPC_IBM_CELL_BLADE || PPC_CELLEB) @@ -2273,9 +2366,17 @@ config GELIC_WIRELESS_OLD_PSK_INTERFACE If unsure, say N. +config FSL_PQ_MDIO + tristate "Freescale PQ MDIO" + depends on FSL_SOC + select PHYLIB + help + This driver supports the MDIO bus used by the gianfar and UCC drivers. + config GIANFAR tristate "Gianfar Ethernet" depends on FSL_SOC + select FSL_PQ_MDIO select PHYLIB select CRC32 help @@ -2285,22 +2386,20 @@ config GIANFAR config UCC_GETH tristate "Freescale QE Gigabit Ethernet" depends on QUICC_ENGINE + select FSL_PQ_MDIO select PHYLIB help This driver supports the Gigabit Ethernet mode of the QUICC Engine, which is available on some Freescale SOCs. -config UGETH_MAGIC_PACKET - bool "Magic Packet detection support" - depends on UCC_GETH - config UGETH_TX_ON_DEMAND bool "Transmit on Demand support" depends on UCC_GETH config MV643XX_ETH tristate "Marvell Discovery (643XX) and Orion ethernet support" - depends on MV64360 || MV64X60 || (PPC_MULTIPLATFORM && PPC32) || PLAT_ORION + depends on MV64X60 || PPC32 || PLAT_ORION + select INET_LRO select PHYLIB help This driver supports the gigabit ethernet MACs in the @@ -2310,6 +2409,14 @@ config MV643XX_ETH Some boards that use the Discovery chipset are the Momenco Ocelot C and Jaguar ATX and Pegasos II. +config XILINX_LL_TEMAC + tristate "Xilinx LL TEMAC (LocalLink Tri-mode Ethernet MAC) driver" + select PHYLIB + depends on PPC_DCR_NATIVE + help + This driver supports the Xilinx 10/100/1000 LocalLink TEMAC + core used in Xilinx Spartan and Virtex FPGAs + config QLA3XXX tristate "QLogic QLA3XXX Network Driver Support" depends on PCI @@ -2342,6 +2449,17 @@ config ATL1E To compile this driver as a module, choose M here. The module will be called atl1e. +config ATL1C + tristate "Atheros L1C Gigabit Ethernet support (EXPERIMENTAL)" + depends on PCI && EXPERIMENTAL + select CRC32 + select MII + help + This driver supports the Atheros L1C gigabit ethernet adapter. + + To compile this driver as a module, choose M here. The module + will be called atl1c. + config JME tristate "JMicron(R) PCI-Express Gigabit Ethernet support" depends on PCI @@ -2354,6 +2472,19 @@ config JME To compile this driver as a module, choose M here. The module will be called jme. +config S6GMAC + tristate "S6105 GMAC ethernet support" + depends on XTENSA_VARIANT_S6000 + select PHYLIB + help + This driver supports the on chip ethernet device on the + S6105 xtensa processor. + + To compile this driver as a module, choose M here. The module + will be called s6gmac. + +source "drivers/net/stmmac/Kconfig" + endif # NETDEV_1000 # @@ -2372,10 +2503,14 @@ menuconfig NETDEV_10000 if NETDEV_10000 +config MDIO + tristate + config CHELSIO_T1 tristate "Chelsio 10Gb Ethernet support" depends on PCI select CRC32 + select MDIO help This driver supports Chelsio gigabit and 10-gigabit Ethernet cards. More information about adapter features and @@ -2408,7 +2543,7 @@ config CHELSIO_T3 tristate "Chelsio Communications T3 10Gb Ethernet support" depends on CHELSIO_T3_DEPENDS select FW_LOADER - select INET_LRO + select MDIO help This driver supports Chelsio T3-based gigabit and 10Gb Ethernet adapters. @@ -2444,7 +2579,7 @@ config ENIC config IXGBE tristate "Intel(R) 10GbE PCI Express adapters support" depends on PCI && INET - select INET_LRO + select MDIO ---help--- This driver supports Intel(R) 10GbE PCI Express family of adapters. For more information on how to identify your adapter, go @@ -2509,6 +2644,23 @@ config S2IO More specific information on configuring the driver is in . +config VXGE + tristate "Neterion X3100 Series 10GbE PCIe Server Adapter" + depends on PCI && INET + ---help--- + This driver supports Neterion Inc's X3100 Series 10 GbE PCIe + I/O Virtualized Server Adapter. + More specific information on configuring the driver is in + . + +config VXGE_DEBUG_TRACE_ALL + bool "Enabling All Debug trace statments in driver" + default n + depends on VXGE + ---help--- + Say Y here if you want to enabling all the debug trace statements in + driver. By default only few debug trace statements are enabled. + config MYRI10GE tristate "Myricom Myri-10G Ethernet support" depends on PCI && INET @@ -2590,8 +2742,10 @@ config TEHUTI config BNX2X tristate "Broadcom NetXtremeII 10Gb support" depends on PCI + select FW_LOADER select ZLIB_INFLATE select LIBCRC32C + select MDIO help This driver supports Broadcom NetXtremeII 10 gigabit Ethernet cards. To compile this driver as a module, choose M here: the module @@ -2608,6 +2762,8 @@ config QLGE source "drivers/net/sfc/Kconfig" +source "drivers/net/benet/Kconfig" + endif # NETDEV_10000 source "drivers/net/tokenring/Kconfig" @@ -2624,6 +2780,8 @@ source "drivers/net/wan/Kconfig" source "drivers/atm/Kconfig" +source "drivers/ieee802154/Kconfig" + source "drivers/s390/net/Kconfig" config XEN_NETDEV_FRONTEND @@ -3075,4 +3233,12 @@ config VIRTIO_NET This is the virtual network driver for virtio. It can be used with lguest or QEMU based VMMs (like KVM or Xen). Say Y or M. +config VMXNET3 + tristate "VMware VMXNET3 ethernet driver" + depends on PCI && X86 && INET + help + This driver supports VMware's vmxnet3 virtual ethernet NIC. + To compile this driver as a module, choose M here: the + module will be called vmxnet3. + endif # NETDEVICES