X-Git-Url: http://ftp.safe.ca/?a=blobdiff_plain;f=drivers%2Fnet%2FKconfig;h=10ac82f3612aa8115d85068e62527beb1046eb70;hb=bf345707299b34de90fbae062eff51e76561eb40;hp=018b11a7a4ce04c41c7ed14e3d24d179c4822243;hpb=3c8c7b2f32c52b259daa7564fefd582146799b23;p=safe%2Fjmp%2Flinux-2.6 diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 018b11a..10ac82f 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -4,9 +4,10 @@ # menu "Network device support" + depends on NET config NETDEVICES - depends on NET + default y if UML bool "Network device support" ---help--- You can say N here if you don't intend to connect your Linux box to @@ -27,6 +28,19 @@ config NETDEVICES # that for each of the symbols. if NETDEVICES +config IFB + tristate "Intermediate Functional Block support" + depends on NET_CLS_ACT + ---help--- + This is an intermediate driver that allows sharing of + resources. + To compile this driver as a module, choose M here: the module + will be called ifb. If you want to use more than one ifb + device at a time, you need to compile this driver as a module. + Instead of 'ifb', the devices will then be called 'ifb0', + 'ifb1' etc. + Look at the iproute2 documentation directory for usage etc + config DUMMY tristate "Dummy net driver support" ---help--- @@ -55,7 +69,7 @@ config BONDING 'Trunking' by Sun, 802.3ad by the IEEE, and 'Bonding' in Linux. The driver supports multiple bonding modes to allow for both high - perfomance and high availability operation. + performance and high availability operation. Refer to for more information. @@ -129,7 +143,7 @@ config NET_SB1000 If you don't have this card, of course say N. - source "drivers/net/arcnet/Kconfig" +source "drivers/net/arcnet/Kconfig" source "drivers/net/phy/Kconfig" @@ -174,6 +188,17 @@ config MII or internal device. It is safe to say Y or M here even if your ethernet card lack MII. +config MACB + tristate "Atmel MACB support" + depends on NET_ETHERNET && AVR32 + select MII + help + The Atmel MACB ethernet interface is found on many AT32 and AT91 + parts. Say Y to include support for the MACB chip. + + To compile this driver as a module, choose M here: the module + will be called macb. + source "drivers/net/arm/Kconfig" config MACE @@ -427,15 +452,10 @@ config MIPS_JAZZ_SONIC This is the driver for the onboard card of MIPS Magnum 4000, Acer PICA, Olivetti M700-10 and a few other identical OEM systems. -config MIPS_GT96100ETH - bool "MIPS GT96100 Ethernet support" - depends on NET_ETHERNET && MIPS_GT96100 - help - Say Y here to support the Ethernet subsystem on your GT96100 card. - config MIPS_AU1X00_ENET bool "MIPS AU1000 Ethernet support" depends on NET_ETHERNET && SOC_AU1X00 + select PHYLIB select CRC32 help If you have an Alchemy Semi AU1X00 based system @@ -447,7 +467,7 @@ config NET_SB1250_MAC config SGI_IOC3_ETH bool "SGI IOC3 Ethernet" - depends on NET_ETHERNET && PCI && SGI_IP27 && BROKEN + depends on NET_ETHERNET && PCI && SGI_IP27 select CRC32 select MII help @@ -475,6 +495,14 @@ config SGI_IOC3_ETH_HW_TX_CSUM the moment only acceleration of IPv4 is supported. This option enables offloading for checksums on transmit. If unsure, say Y. +config MIPS_SIM_NET + tristate "MIPS simulator Network device (EXPERIMENTAL)" + depends on MIPS_SIM && EXPERIMENTAL + help + The MIPSNET device is a simple Ethernet network device which is + emulated by the MIPS Simulator. + If you are not using a MIPSsim or are unsure, say N. + config SGI_O2MACE_ETH tristate "SGI O2 MACE Fast Ethernet support" depends on NET_ETHERNET && SGI_IP32=y @@ -679,8 +707,8 @@ config VORTEX depends on NET_VENDOR_3COM && (PCI || EISA) select MII ---help--- - This option enables driver support for a large number of 10mbps and - 10/100mbps EISA, PCI and PCMCIA 3Com network cards: + This option enables driver support for a large number of 10Mbps and + 10/100Mbps EISA, PCI and PCMCIA 3Com network cards: "Vortex" (Fast EtherLink 3c590/3c592/3c595/3c597) EISA and PCI "Boomerang" (EtherLink XL 3c900 or 3c905) PCI @@ -804,7 +832,7 @@ config SMC91X tristate "SMC 91C9x/91C1xxx support" select CRC32 select MII - depends on NET_ETHERNET && (ARM || REDWOOD_5 || REDWOOD_6 || M32R || SUPERH) + depends on NET_ETHERNET && (ARM || REDWOOD_5 || REDWOOD_6 || M32R || SUPERH || SOC_AU1X00) help This is a driver for SMC's 91x series of Ethernet chipsets, including the SMC91C94 and the SMC91C111. Say Y if you want it @@ -834,9 +862,20 @@ config SMC9194 . The module will be called smc9194. +config NET_NETX + tristate "NetX Ethernet support" + select MII + depends on NET_ETHERNET && ARCH_NETX + help + This is support for the Hilscher netX builtin Ethernet ports + + To compile this driver as a module, choose M here and read + . The module + will be called netx-eth. + config DM9000 tristate "DM9000 support" - depends on ARM && NET_ETHERNET + depends on (ARM || MIPS) && NET_ETHERNET select CRC32 select MII ---help--- @@ -846,6 +885,22 @@ config DM9000 . The module will be called dm9000. +config SMC911X + tristate "SMSC LAN911[5678] support" + select CRC32 + select MII + depends on NET_ETHERNET && ARCH_PXA + help + This is a driver for SMSC's LAN911x series of Ethernet chipsets + including the new LAN9115, LAN9116, LAN9117, and LAN9118. + Say Y if you want it compiled into the kernel, + and read the Ethernet-HOWTO, available from + . + + This driver is also available as a module. The module will be + called smc911x. If you want to compile it as a module, say M + here and read + config NET_VENDOR_RACAL bool "Racal-Interlan (Micom) NI cards" depends on NET_ETHERNET && ISA @@ -1002,7 +1057,7 @@ config EEXPRESS_PRO depends on NET_ISA ---help--- If you have a network (Ethernet) card of this type, say Y. This - driver supports intel i82595{FX,TX} based boards. Note however + driver supports Intel i82595{FX,TX} based boards. Note however that the EtherExpress PRO/100 Ethernet card has its own separate driver. Please read the Ethernet-HOWTO, available from . @@ -1068,7 +1123,8 @@ config NE2000 without a specific driver are compatible with NE2000. If you have a PCI NE2000 card however, say N here and Y to "PCI - NE2000 support", above. If you have a NE2000 card and are running on + NE2000 and clone support" under "EISA, VLB, PCI and on board + controllers" below. If you have a NE2000 card and are running on an MCA system (a bus system used on some IBM PS/2 computers and laptops), say N here and Y to "NE/2 (ne2000 MCA version) support", below. @@ -1155,38 +1211,74 @@ config IBMVETH be called ibmveth. config IBM_EMAC - bool "IBM PPC4xx EMAC driver support" + tristate "PowerPC 4xx on-chip Ethernet support" depends on 4xx - select CRC32 - ---help--- - This driver supports the IBM PPC4xx EMAC family of on-chip - Ethernet controllers. - -config IBM_EMAC_ERRMSG - bool "Verbose error messages" - depends on IBM_EMAC && BROKEN + help + This driver supports the PowerPC 4xx EMAC family of on-chip + Ethernet controllers. config IBM_EMAC_RXB int "Number of receive buffers" depends on IBM_EMAC - default "128" if IBM_EMAC4 - default "64" + default "128" config IBM_EMAC_TXB int "Number of transmit buffers" depends on IBM_EMAC - default "128" if IBM_EMAC4 - default "8" + default "64" -config IBM_EMAC_FGAP - int "Frame gap" +config IBM_EMAC_POLL_WEIGHT + int "MAL NAPI polling weight" depends on IBM_EMAC - default "8" + default "32" -config IBM_EMAC_SKBRES - int "Skb reserve amount" +config IBM_EMAC_RX_COPY_THRESHOLD + int "RX skb copy threshold (bytes)" + depends on IBM_EMAC + default "256" + +config IBM_EMAC_RX_SKB_HEADROOM + int "Additional RX skb headroom (bytes)" depends on IBM_EMAC default "0" + help + Additional receive skb headroom. Note, that driver + will always reserve at least 2 bytes to make IP header + aligned, so usually there is no need to add any additional + headroom. + + If unsure, set to 0. + +config IBM_EMAC_PHY_RX_CLK_FIX + bool "PHY Rx clock workaround" + depends on IBM_EMAC && (405EP || 440GX || 440EP || 440GR) + help + Enable this if EMAC attached to a PHY which doesn't generate + RX clock if there is no link, if this is the case, you will + see "TX disable timeout" or "RX disable timeout" in the system + log. + + If unsure, say N. + +config IBM_EMAC_DEBUG + bool "Debugging" + depends on IBM_EMAC + default n + +config IBM_EMAC_ZMII + bool + depends on IBM_EMAC && (NP405H || NP405L || 44x) + default y + +config IBM_EMAC_RGMII + bool + depends on IBM_EMAC && 440GX + default y + +config IBM_EMAC_TAH + bool + depends on IBM_EMAC && 440GX + default y config NET_PCI bool "EISA, VLB, PCI and on board controllers" @@ -1216,6 +1308,23 @@ config PCNET32 . The module will be called pcnet32. +config PCNET32_NAPI + bool "Use RX polling (NAPI) (EXPERIMENTAL)" + depends on PCNET32 && EXPERIMENTAL + help + NAPI is a new driver API designed to reduce CPU and interrupt load + when the driver is receiving lots of packets from the card. It is + still somewhat experimental and thus not yet enabled by default. + + If your estimated Rx load is 10kpps or more, or if the card will be + deployed on potentially unfriendly networks (e.g. in a firewall), + then say Y here. + + See for more + information. + + If in doubt, say N. + config AMD8111_ETH tristate "AMD 8111 (new PCI lance) support" depends on NET_PCI && PCI @@ -1303,8 +1412,8 @@ config APRICOT called apricot. config B44 - tristate "Broadcom 4400 ethernet support (EXPERIMENTAL)" - depends on NET_PCI && PCI && EXPERIMENTAL + tristate "Broadcom 4400 ethernet support" + depends on NET_PCI && PCI select MII help If you have a network (Ethernet) controller of this type, say Y and @@ -1316,8 +1425,8 @@ config B44 called b44. config FORCEDETH - tristate "Reverse Engineered nForce Ethernet support (EXPERIMENTAL)" - depends on NET_PCI && PCI && EXPERIMENTAL + tristate "nForce Ethernet support" + depends on NET_PCI && PCI help If you have a network (Ethernet) controller of this type, say Y and read the Ethernet-HOWTO, available from @@ -1327,10 +1436,26 @@ config FORCEDETH . The module will be called forcedeth. +config FORCEDETH_NAPI + bool "Use Rx and Tx Polling (NAPI) (EXPERIMENTAL)" + depends on FORCEDETH && EXPERIMENTAL + help + NAPI is a new driver API designed to reduce CPU and interrupt load + when the driver is receiving lots of packets from the card. It is + still somewhat experimental and thus not yet enabled by default. + + If your estimated Rx load is 10kpps or more, or if the card will be + deployed on potentially unfriendly networks (e.g. in a firewall), + then say Y here. + + See for more + information. + + If in doubt, say N. config CS89x0 tristate "CS89x0 support" - depends on (NET_PCI && (ISA || ARCH_IXDP2X01)) || ARCH_PNX0105 + depends on NET_PCI && (ISA || MACH_IXDP2351 || ARCH_IXDP2X01 || ARCH_PNX010X) ---help--- Support for CS89x0 chipset based Ethernet cards. If you have a network (Ethernet) card of this type, say Y and read the @@ -1340,7 +1465,7 @@ config CS89x0 To compile this driver as a module, choose M here and read . The module will be - called cs89x. + called cs89x0. config TC35815 tristate "TOSHIBA TC35815 Ethernet support" @@ -1558,11 +1683,7 @@ config SIS900 ---help--- This is a driver for the Fast Ethernet PCI network cards based on the SiS 900 and SiS 7016 chips. The SiS 900 core is also embedded in - SiS 630 and SiS 540 chipsets. If you have one of those, say Y and - read the Ethernet-HOWTO, available at - . Please read - and comments at the - beginning of for more information. + SiS 630 and SiS 540 chipsets. This driver also supports AMD 79C901 HomePNA so that you can use your phone line as a network cable. @@ -1644,18 +1765,44 @@ config VIA_RHINE_MMIO If unsure, say Y. +config VIA_RHINE_NAPI + bool "Use Rx Polling (NAPI)" + depends on VIA_RHINE + help + NAPI is a new driver API designed to reduce CPU and interrupt load + when the driver is receiving lots of packets from the card. + + If your estimated Rx load is 10kpps or more, or if the card will be + deployed on potentially unfriendly networks (e.g. in a firewall), + then say Y here. + + See for more + information. + config LAN_SAA9730 - bool "Philips SAA9730 Ethernet support (EXPERIMENTAL)" - depends on NET_PCI && EXPERIMENTAL && MIPS + bool "Philips SAA9730 Ethernet support" + depends on NET_PCI && PCI && MIPS_ATLAS help The SAA9730 is a combined multimedia and peripheral controller used in thin clients, Internet access terminals, and diskless workstations. See . +config SC92031 + tristate "Silan SC92031 PCI Fast Ethernet Adapter driver (EXPERIMENTAL)" + depends on NET_PCI && PCI && EXPERIMENTAL + select CRC32 + ---help--- + This is a driver for the Fast Ethernet PCI network cards based on + the Silan SC92031 chip (sometimes also called Rsltek 8139D). If you + have one of these, say Y here. + + To compile this driver as a module, choose M here: the module + will be called sc92031. This is recommended. + config NET_POCKET bool "Pocket and portable adapters" - depends on NET_ETHERNET && ISA + depends on NET_ETHERNET && PARPORT ---help--- Cute little network (Ethernet) devices which attach to the parallel port ("pocket adapters"), commonly used with laptops. If you have @@ -1679,7 +1826,7 @@ config NET_POCKET config ATP tristate "AT-LAN-TEC/RealTek pocket adapter support" - depends on NET_POCKET && ISA && X86 + depends on NET_POCKET && PARPORT && X86 select CRC32 ---help--- This is a network (Ethernet) device which attaches to your parallel @@ -1694,7 +1841,7 @@ config ATP config DE600 tristate "D-Link DE600 pocket adapter support" - depends on NET_POCKET && ISA + depends on NET_POCKET && PARPORT ---help--- This is a network (Ethernet) device which attaches to your parallel port. Read as well as the @@ -1709,7 +1856,7 @@ config DE600 config DE620 tristate "D-Link DE620 pocket adapter support" - depends on NET_POCKET && ISA + depends on NET_POCKET && PARPORT ---help--- This is a network (Ethernet) device which attaches to your parallel port. Read as well as the @@ -1747,7 +1894,7 @@ config 68360_ENET config FEC bool "FEC ethernet controller (of ColdFire CPUs)" - depends on M523x || M527x || M5272 || M528x + depends on M523x || M527x || M5272 || M528x || M520x help Say Y here if you want to use the built-in 10/100 Fast ethernet controller on some Motorola ColdFire processors. @@ -1767,6 +1914,7 @@ config NE_H8300 controller on the Renesas H8/300 processor. source "drivers/net/fec_8xx/Kconfig" +source "drivers/net/fs_enet/Kconfig" endmenu @@ -1856,6 +2004,17 @@ config E1000_NAPI If in doubt, say N. +config E1000_DISABLE_PACKET_SPLIT + bool "Disable Packet Split for PCI express adapters" + depends on E1000 + help + Say Y here if you want to use the legacy receive path for PCI express + hardware. + + If in doubt, say N. + +source "drivers/net/ixp2000/Kconfig" + config MYRI_SBUS tristate "MyriCOM Gigabit Ethernet support" depends on SBUS @@ -1866,7 +2025,7 @@ config MYRI_SBUS will be called myri_sbus. This is recommended. config NS83820 - tristate "National Semiconduct DP83820 support" + tristate "National Semiconductor DP83820 support" depends on PCI help This is a driver for the National Semiconductor DP83820 series @@ -1953,8 +2112,8 @@ config SIS190 will be called sis190. This is recommended. config SKGE - tristate "New SysKonnect GigaEthernet support (EXPERIMENTAL)" - depends on PCI && EXPERIMENTAL + tristate "New SysKonnect GigaEthernet support" + depends on PCI select CRC32 ---help--- This driver support the Marvell Yukon or SysKonnect SK-98xx/SK-95xx @@ -1963,14 +2122,47 @@ config SKGE It does not support the link failover and network management features that "portable" vendor supplied sk98lin driver does. - + + This driver supports adapters based on the original Yukon chipset: + Marvell 88E8001, Belkin F5D5005, CNet GigaCard, DLink DGE-530T, + Linksys EG1032/EG1064, 3Com 3C940/3C940B, SysKonnect SK-9871/9872. + + It does not support the newer Yukon2 chipset: a separate driver, + sky2, is provided for Yukon2-based adapters. + + To compile this driver as a module, choose M here: the module + will be called skge. This is recommended. + +config SKY2 + tristate "SysKonnect Yukon2 support (EXPERIMENTAL)" + depends on PCI + select CRC32 + ---help--- + This driver supports Gigabit Ethernet adapters based on the + Marvell Yukon 2 chipset: + Marvell 88E8021/88E8022/88E8035/88E8036/88E8038/88E8050/88E8052/ + 88E8053/88E8055/88E8061/88E8062, SysKonnect SK-9E21D/SK-9S21 + + There is companion driver for the older Marvell Yukon and + Genesis based adapters: skge. + + To compile this driver as a module, choose M here: the module + will be called sky2. This is recommended. + config SK98LIN tristate "Marvell Yukon Chipset / SysKonnect SK-98xx Support" depends on PCI ---help--- Say Y here if you have a Marvell Yukon or SysKonnect SK-98xx/SK-95xx - compliant Gigabit Ethernet Adapter. The following adapters are supported - by this driver: + compliant Gigabit Ethernet Adapter. + + This driver supports the original Yukon chipset. A cleaner driver is + also available (skge) which seems to work better than this one. + + This driver does not support the newer Yukon2 chipset. A separate + driver, sky2, is provided to support Yukon2-based adapters. + + The following adapters are supported by this driver: - 3Com 3C940 Gigabit LOM Ethernet Adapter - 3Com 3C941 Gigabit LOM Ethernet Adapter - Allied Telesyn AT-2970LX Gigabit Ethernet Adapter @@ -1982,7 +2174,6 @@ config SK98LIN - Allied Telesyn AT-2971SX Gigabit Ethernet Adapter - Allied Telesyn AT-2971T Gigabit Ethernet Adapter - Belkin Gigabit Desktop Card 10/100/1000Base-T Adapter, Copper RJ-45 - - DGE-530T Gigabit Ethernet Adapter - EG1032 v2 Instant Gigabit Network Adapter - EG1064 v2 Instant Gigabit Network Adapter - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Abit) @@ -2067,6 +2258,8 @@ config TIGON3 config BNX2 tristate "Broadcom NetXtremeII support" depends on PCI + select CRC32 + select ZLIB_INFLATE help This driver supports Broadcom NetXtremeII gigabit Ethernet cards. @@ -2075,26 +2268,63 @@ config BNX2 config SPIDER_NET tristate "Spider Gigabit Ethernet driver" - depends on PCI && PPC_BPA + depends on PCI && PPC_IBM_CELL_BLADE + select FW_LOADER help This driver supports the Gigabit Ethernet chips present on the Cell Processor-Based Blades from IBM. +config TSI108_ETH + tristate "Tundra TSI108 gigabit Ethernet support" + depends on TSI108_BRIDGE + help + This driver supports Tundra TSI108 gigabit Ethernet ports. + To compile this driver as a module, choose M here: the module + will be called tsi108_eth. + config GIANFAR tristate "Gianfar Ethernet" - depends on 85xx || 83xx + depends on 85xx || 83xx || PPC_86xx select PHYLIB help - This driver supports the Gigabit TSEC on the MPC85xx - family of chips, and the FEC on the 8540 + This driver supports the Gigabit TSEC on the MPC83xx, MPC85xx, + and MPC86xx family of chips, and the FEC on the 8540. config GFAR_NAPI bool "NAPI Support" depends on GIANFAR +config UCC_GETH + tristate "Freescale QE UCC GETH" + depends on QUICC_ENGINE && UCC_FAST + help + This driver supports the Gigabit Ethernet mode of QE UCC. + QE can be found on MPC836x CPUs. + +config UGETH_NAPI + bool "NAPI Support" + depends on UCC_GETH + +config UGETH_MAGIC_PACKET + bool "Magic Packet detection support" + depends on UCC_GETH + +config UGETH_FILTERING + bool "Mac address filtering support" + depends on UCC_GETH + +config UGETH_TX_ON_DEMOND + bool "Transmit on Demond support" + depends on UCC_GETH + +config UGETH_HAS_GIGA + bool + depends on UCC_GETH && PPC_MPC836x + config MV643XX_ETH tristate "MV-643XX Ethernet support" - depends on MOMENCO_OCELOT_C || MOMENCO_JAGUAR_ATX || MV64360 || MOMENCO_OCELOT_3 || PPC_MULTIPLATFORM + depends on MOMENCO_OCELOT_C || MOMENCO_JAGUAR_ATX || MV64360 || MOMENCO_OCELOT_3 || (PPC_MULTIPLATFORM && PPC32) + select MII help This driver supports the gigabit Ethernet on the Marvell MV643XX chipset which is used in the Momenco Ocelot C and Jaguar ATX and @@ -2121,6 +2351,15 @@ config MV643XX_ETH_2 This enables support for Port 2 of the Marvell MV643XX Gigabit Ethernet. +config QLA3XXX + tristate "QLogic QLA3XXX Network Driver Support" + depends on PCI + help + This driver supports QLogic ISP3XXX gigabit Ethernet cards. + + To compile this driver as a module, choose M here: the module + will be called qla3xxx. + endmenu # @@ -2133,10 +2372,11 @@ menu "Ethernet (10000 Mbit)" config CHELSIO_T1 tristate "Chelsio 10Gb Ethernet support" depends on PCI + select CRC32 help - This driver supports Chelsio N110 and N210 models 10Gb Ethernet - cards. More information about adapter features and performance - tuning is in . + This driver supports Chelsio gigabit and 10-gigabit + Ethernet cards. More information about adapter features and + performance tuning is in . For general information about Chelsio and our products, visit our website at . @@ -2149,6 +2389,30 @@ config CHELSIO_T1 To compile this driver as a module, choose M here: the module will be called cxgb. +config CHELSIO_T1_1G + bool "Chelsio gigabit Ethernet support" + depends on CHELSIO_T1 + help + Enables support for Chelsio's gigabit Ethernet PCI cards. If you + are using only 10G cards say 'N' here. + +config CHELSIO_T1_NAPI + bool "Use Rx Polling (NAPI)" + depends on CHELSIO_T1 + default y + help + NAPI is a driver API designed to reduce CPU and interrupt load + when the driver is receiving lots of packets from the card. + +config EHEA + tristate "eHEA Ethernet support" + depends on IBMEBUS + ---help--- + This driver supports the IBM pSeries eHEA ethernet adapter. + + To compile the driver as a module, choose M here. The module + will be called ehea. + config IXGB tristate "Intel(R) PRO/10GbE support" depends on PCI @@ -2193,8 +2457,8 @@ config S2IO depends on PCI ---help--- This driver supports the 10Gbe XFrame NIC of S2IO. - For help regarding driver compilation, installation and - tuning please look into ~/drivers/net/s2io/README.txt. + More specific information on configuring the driver is in + . config S2IO_NAPI bool "Use Rx Polling (NAPI) (EXPERIMENTAL)" @@ -2213,26 +2477,36 @@ config S2IO_NAPI If in doubt, say N. -config 2BUFF_MODE - bool "Use 2 Buffer Mode on Rx side." - depends on S2IO +config MYRI10GE + tristate "Myricom Myri-10G Ethernet support" + depends on PCI + select FW_LOADER + select CRC32 ---help--- - On enabling the 2 buffer mode, the received frame will be - split into 2 parts before being DMA'ed to the hosts memory. - The parts are the ethernet header and ethernet payload. - This is useful on systems where DMA'ing to to unaligned - physical memory loactions comes with a heavy price. - If not sure please say N. + This driver supports Myricom Myri-10G Dual Protocol interface in + Ethernet mode. If the eeprom on your board is not recent enough, + you will need a newer firmware image. + You may get this image or more information, at: + + + + To compile this driver as a module, choose M here and read + . The module + will be called myri10ge. + +config NETXEN_NIC + tristate "NetXen Multi port (1/10) Gigabit Ethernet NIC" + depends on PCI + help + This enables the support for NetXen's Gigabit Ethernet card. endmenu -if !UML source "drivers/net/tokenring/Kconfig" source "drivers/net/wireless/Kconfig" source "drivers/net/pcmcia/Kconfig" -endif source "drivers/net/wan/Kconfig" @@ -2246,7 +2520,7 @@ config ISERIES_VETH config RIONET tristate "RapidIO Ethernet over messaging driver support" - depends on NETDEVICES && RAPIDIO + depends on RAPIDIO config RIONET_TX_SIZE int "Number of outbound queue entries" @@ -2377,6 +2651,7 @@ config PLIP config PPP tristate "PPP (point-to-point protocol) support" + select SLHC ---help--- PPP (Point to Point Protocol) is a newer and better SLIP. It serves the same purpose: sending Internet traffic over telephone (and other @@ -2425,7 +2700,7 @@ config PPP_FILTER Say Y here if you want to be able to filter the packets passing over PPP interfaces. This allows you to control which packets count as activity (i.e. which packets will reset the idle timer or bring up - a demand-dialled link) and which packets are to be dropped entirely. + a demand-dialed link) and which packets are to be dropped entirely. You need to say Y here if you wish to use the pass-filter and active-filter options to pppd. @@ -2489,6 +2764,20 @@ config PPP_BSDCOMP module; it is called bsd_comp and will show up in the directory modules once you have said "make modules". If unsure, say N. +config PPP_MPPE + tristate "PPP MPPE compression (encryption) (EXPERIMENTAL)" + depends on PPP && EXPERIMENTAL + select CRYPTO + select CRYPTO_SHA1 + select CRYPTO_ARC4 + select CRYPTO_ECB + ---help--- + Support for the MPPE Encryption protocol, as employed by the + Microsoft Point-to-Point Tunneling Protocol. + + See http://pptpclient.sourceforge.net/ for information on + configuring PPTP clients and servers to utilize this method. + config PPPOE tristate "PPP over Ethernet (EXPERIMENTAL)" depends on EXPERIMENTAL && PPP @@ -2544,6 +2833,7 @@ config SLIP config SLIP_COMPRESSED bool "CSLIP compressed headers" depends on SLIP + select SLHC ---help--- This protocol is faster than SLIP because it uses compression on the TCP/IP headers (not on the data itself), but it has to be supported @@ -2556,6 +2846,12 @@ config SLIP_COMPRESSED , explains how to configure CSLIP. This won't enlarge your kernel. +config SLHC + tristate + help + This option enables Van Jacobsen serial line header compression + routines. + config SLIP_SMART bool "Keepalive and linefill" depends on SLIP @@ -2590,7 +2886,7 @@ config NET_FC "SCSI generic support". config SHAPER - tristate "Traffic Shaper (EXPERIMENTAL)" + tristate "Traffic Shaper (OBSOLETE)" depends on EXPERIMENTAL ---help--- The traffic shaper is a virtual network device that allows you to @@ -2599,13 +2895,9 @@ config SHAPER these virtual devices. See for more information. - An alternative to this traffic shaper is the experimental - Class-Based Queueing (CBQ) scheduling support which you get if you - say Y to "QoS and/or fair queueing" above. - - To set up and configure shaper devices, you need the shapecfg - program, available from in the - shaper package. + An alternative to this traffic shaper are traffic schedulers which + you'll get if you say Y to "QoS and/or fair queuing" in + "Networking options". To compile this driver as a module, choose M here: the module will be called shaper. If unsure, say N.