X-Git-Url: http://ftp.safe.ca/?a=blobdiff_plain;f=drivers%2Fnet%2F3c505.c;h=29b8d1d63bdeacdfb6cc7b432590216a448ab7e5;hb=c429137a67b82788d24682153bb9c96501a9ef34;hp=b28499459cd6c4d0110dc1f4d1e25bd4d0866eb8;hpb=646cdb32831eebe8c2f742c293d0d266326854d9;p=safe%2Fjmp%2Flinux-2.6

diff --git a/drivers/net/3c505.c b/drivers/net/3c505.c
index b284994..29b8d1d 100644
--- a/drivers/net/3c505.c
+++ b/drivers/net/3c505.c
@@ -102,12 +102,12 @@
 #include <linux/interrupt.h>
 #include <linux/errno.h>
 #include <linux/in.h>
-#include <linux/slab.h>
 #include <linux/ioport.h>
 #include <linux/spinlock.h>
 #include <linux/ethtool.h>
 #include <linux/delay.h>
 #include <linux/bitops.h>
+#include <linux/gfp.h>
 
 #include <asm/uaccess.h>
 #include <asm/io.h>
@@ -886,7 +886,7 @@ static int elp_open(struct net_device *dev)
 	/*
 	 * install our interrupt service routine
 	 */
-	if ((retval = request_irq(dev->irq, &elp_interrupt, 0, dev->name, dev))) {
+	if ((retval = request_irq(dev->irq, elp_interrupt, 0, dev->name, dev))) {
 		pr_err("%s: could not allocate IRQ%d\n", dev->name, dev->irq);
 		return retval;
 	}
@@ -976,7 +976,7 @@ static int elp_open(struct net_device *dev)
  *
  ******************************************************/
 
-static bool send_packet(struct net_device *dev, struct sk_buff *skb)
+static netdev_tx_t send_packet(struct net_device *dev, struct sk_buff *skb)
 {
 	elp_device *adapter = netdev_priv(dev);
 	unsigned long target;
@@ -1067,7 +1067,7 @@ static void elp_timeout(struct net_device *dev)
  *
  ******************************************************/
 
-static int elp_start_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t elp_start_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	unsigned long flags;
 	elp_device *adapter = netdev_priv(dev);
@@ -1088,7 +1088,7 @@ static int elp_start_xmit(struct sk_buff *skb, struct net_device *dev)
 			pr_debug("%s: failed to transmit packet\n", dev->name);
 		}
 		spin_unlock_irqrestore(&adapter->lock, flags);
-		return 1;
+		return NETDEV_TX_BUSY;
 	}
 	if (elp_debug >= 3)
 		pr_debug("%s: packet of length %d sent\n", dev->name, (int) skb->len);
@@ -1101,7 +1101,7 @@ static int elp_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	prime_rx(dev);
 	spin_unlock_irqrestore(&adapter->lock, flags);
 	netif_start_queue(dev);
-	return 0;
+	return NETDEV_TX_OK;
 }
 
 /******************************************************
@@ -1216,7 +1216,7 @@ static int elp_close(struct net_device *dev)
 static void elp_set_mc_list(struct net_device *dev)
 {
 	elp_device *adapter = netdev_priv(dev);
-	struct dev_mc_list *dmi = dev->mc_list;
+	struct dev_mc_list *dmi;
 	int i;
 	unsigned long flags;
 
@@ -1229,11 +1229,10 @@ static void elp_set_mc_list(struct net_device *dev)
 		/* send a "load multicast list" command to the board, max 10 addrs/cmd */
 		/* if num_addrs==0 the list will be cleared */
 		adapter->tx_pcb.command = CMD_LOAD_MULTICAST_LIST;
-		adapter->tx_pcb.length = 6 * dev->mc_count;
-		for (i = 0; i < dev->mc_count; i++) {
-			memcpy(adapter->tx_pcb.data.multicast[i], dmi->dmi_addr, 6);
-			dmi = dmi->next;
-		}
+		adapter->tx_pcb.length = 6 * netdev_mc_count(dev);
+		i = 0;
+		netdev_for_each_mc_addr(dmi, dev)
+			memcpy(adapter->tx_pcb.data.multicast[i++], dmi->dmi_addr, 6);
 		adapter->got[CMD_LOAD_MULTICAST_LIST] = 0;
 		if (!send_pcb(dev, &adapter->tx_pcb))
 			pr_err("%s: couldn't send set_multicast command\n", dev->name);
@@ -1244,7 +1243,7 @@ static void elp_set_mc_list(struct net_device *dev)
 				TIMEOUT_MSG(__LINE__);
 			}
 		}
-		if (dev->mc_count)
+		if (!netdev_mc_empty(dev))
 			adapter->tx_pcb.data.configure = NO_LOOPBACK | RECV_BROAD | RECV_MULTI;
 		else		/* num_addrs == 0 */
 			adapter->tx_pcb.data.configure = NO_LOOPBACK | RECV_BROAD;