X-Git-Url: http://ftp.safe.ca/?a=blobdiff_plain;f=drivers%2Fmtd%2Fmaps%2FKconfig;h=df8e00bba07b2726f71fbf02b6b1d27ff0cf396a;hb=ff877ea80efa2015b6263766f78ee42c2a1b32f9;hp=8e3e93d62525e2de0a88f824073527bb0eb95169;hpb=9c517e6c801aab0f8de8f9c67bfc16ea13d72971;p=safe%2Fjmp%2Flinux-2.6 diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig index 8e3e93d..df8e00b 100644 --- a/drivers/mtd/maps/Kconfig +++ b/drivers/mtd/maps/Kconfig @@ -1,27 +1,28 @@ # drivers/mtd/maps/Kconfig -# $Id: Kconfig,v 1.58 2005/09/14 19:14:13 tpoynor Exp $ menu "Mapping drivers for chip access" depends on MTD!=n config MTD_COMPLEX_MAPPINGS bool "Support non-linear mappings of flash chips" - depends on MTD help This causes the chip drivers to allow for complicated paged mappings of flash chips. config MTD_PHYSMAP tristate "CFI Flash device in physical memory map" - depends on MTD_CFI + depends on MTD_CFI || MTD_JEDECPROBE || MTD_ROM help - This provides a 'mapping' driver which allows the CFI probe and - command set driver code to communicate with flash chips which - are mapped physically into the CPU's memory. You will need to - configure the physical address and size of the flash chips on - your particular board as well as the bus width, either statically + This provides a 'mapping' driver which allows the NOR Flash and + ROM driver code to communicate with chips which are mapped + physically into the CPU's memory. You will need to configure + the physical address and size of the flash chips on your + particular board as well as the bus width, either statically with config options or at run-time. + To compile this driver as a module, choose M here: the + module will be called physmap. + config MTD_PHYSMAP_START hex "Physical start address of flash mapping" depends on MTD_PHYSMAP @@ -37,7 +38,7 @@ config MTD_PHYSMAP_START config MTD_PHYSMAP_LEN hex "Physical length of flash mapping" depends on MTD_PHYSMAP - default "0x4000000" + default "0" help This is the total length of the mapping of the flash chips on your particular board. If there is space, or aliases, in the @@ -55,30 +56,65 @@ config MTD_PHYSMAP_BANKWIDTH help This is the total width of the data bus of the flash devices in octets. For example, if you have a data bus width of 32 - bits, you would set the bus width octect value to 4. This is + bits, you would set the bus width octet value to 4. This is used internally by the CFI drivers. Ignore this option if you use run-time physmap configuration (i.e., run-time calling physmap_configure()). +config MTD_PHYSMAP_OF + tristate "Flash device in physical memory map based on OF description" + depends on PPC_OF && (MTD_CFI || MTD_JEDECPROBE || MTD_ROM) + help + This provides a 'mapping' driver which allows the NOR Flash and + ROM driver code to communicate with chips which are mapped + physically into the CPU's memory. The mapping description here is + taken from OF device tree. + +config MTD_PMC_MSP_EVM + tristate "CFI Flash device mapped on PMC-Sierra MSP" + depends on PMC_MSP && MTD_CFI + select MTD_PARTITIONS + help + This provides a 'mapping' driver which supports the way + in which user-programmable flash chips are connected on the + PMC-Sierra MSP eval/demo boards. + +choice + prompt "Maximum mappable memory available for flash IO" + depends on MTD_PMC_MSP_EVM + default MSP_FLASH_MAP_LIMIT_32M + +config MSP_FLASH_MAP_LIMIT_32M + bool "32M" + +endchoice + +config MSP_FLASH_MAP_LIMIT + hex + default "0x02000000" + depends on MSP_FLASH_MAP_LIMIT_32M + +config MTD_PMC_MSP_RAMROOT + tristate "Embedded RAM block device for root on PMC-Sierra MSP" + depends on PMC_MSP_EMBEDDED_ROOTFS && \ + (MTD_BLOCK || MTD_BLOCK_RO) && \ + MTD_RAM + help + This provides support for the embedded root file system + on PMC MSP devices. This memory is mapped as a MTD block device. + config MTD_SUN_UFLASH tristate "Sun Microsystems userflash support" - depends on (SPARC32 || SPARC64) && MTD_CFI + depends on SPARC && MTD_CFI && PCI help - This provides a 'mapping' driver which supports the way in - which user-programmable flash chips are connected on various - Sun Microsystems boardsets. This driver will require CFI support + This provides a 'mapping' driver which supports the way in + which user-programmable flash chips are connected on various + Sun Microsystems boardsets. This driver will require CFI support in the kernel, so if you did not enable CFI previously, do that now. -config MTD_PNC2000 - tristate "CFI Flash device mapped on Photron PNC-2000" - depends on X86 && MTD_CFI && MTD_PARTITIONS - help - PNC-2000 is the name of Network Camera product from PHOTRON - Ltd. in Japan. It uses CFI-compliant flash. - config MTD_SC520CDP tristate "CFI Flash device mapped on AMD SC520 CDP" - depends on X86 && MTD_CFI + depends on X86 && MTD_CFI && MTD_CONCAT help The SC520 CDP board has two banks of CFI-compliant chips and one Dual-in-line JEDEC chip. This 'mapping' driver supports that @@ -89,12 +125,15 @@ config MTD_NETSC520 depends on X86 && MTD_CFI && MTD_PARTITIONS help This enables access routines for the flash chips on the AMD NetSc520 - demonstration board. If you have one of these boards and would like + demonstration board. If you have one of these boards and would like to use the flash chips on it, say 'Y'. config MTD_TS5500 tristate "JEDEC Flash device mapped on Technologic Systems TS-5500" - depends on X86 && MTD_JEDECPROBE && MTD_PARTITIONS + depends on X86 + select MTD_PARTITIONS + select MTD_JEDECPROBE + select MTD_CFI_AMDSTD help This provides a driver for the on-board flash of the Technologic System's TS-5500 board. The 2MB flash is split into 3 partitions @@ -106,7 +145,7 @@ config MTD_TS5500 mtd1 allows you to reprogram your BIOS. BE VERY CAREFUL. Note that jumper 3 ("Write Enable Drive A") must be set - otherwise detection won't succeeed. + otherwise detection won't succeed. config MTD_SBC_GXX tristate "CFI Flash device mapped on Arcom SBC-GXx boards" @@ -119,20 +158,12 @@ config MTD_SBC_GXX More info at . -config MTD_LUBBOCK - tristate "CFI Flash device mapped on Intel Lubbock XScale eval board" - depends on ARCH_LUBBOCK && MTD_CFI_INTELEXT && MTD_PARTITIONS - help - This provides a driver for the on-board flash of the Intel - 'Lubbock' XScale evaluation board. - -config MTD_MAINSTONE - tristate "CFI Flash device mapped on Intel Mainstone XScale eval board" - depends on MACH_MAINSTONE && MTD_CFI_INTELEXT +config MTD_PXA2XX + tristate "CFI Flash device mapped on Intel XScale PXA2xx based boards" + depends on (PXA25x || PXA27x) && MTD_CFI_INTELEXT select MTD_PARTITIONS help - This provides a driver for the on-board flash of the Intel - 'Mainstone PXA27x evaluation board. + This provides a driver for the NOR flash attached to a PXA2xx chip. config MTD_OCTAGON tristate "JEDEC Flash device mapped on Octagon 5066 SBC" @@ -181,6 +212,24 @@ config MTD_ICHXROM BE VERY CAREFUL. +config MTD_ESB2ROM + tristate "BIOS flash chip on Intel ESB Controller Hub 2" + depends on X86 && MTD_JEDECPROBE && PCI + help + Support for treating the BIOS flash chip on ESB2 motherboards + as an MTD device - with this you can reprogram your BIOS. + + BE VERY CAREFUL. + +config MTD_CK804XROM + tristate "BIOS flash chip on Nvidia CK804" + depends on X86 && MTD_JEDECPROBE && PCI + help + Support for treating the BIOS flash chip on nvidia motherboards + as an MTD device - with this you can reprogram your BIOS. + + BE VERY CAREFUL. + config MTD_SCB2_FLASH tristate "BIOS flash chip on Intel SCB2 boards" depends on X86 && MTD_JEDECPROBE @@ -196,12 +245,6 @@ config MTD_TSUNAMI help Support for the flash chip on Tsunami TIG bus. -config MTD_LASAT - tristate "Flash chips on LASAT board" - depends on LASAT - help - Support for the flash chips on the Lasat 100 and 200 boards. - config MTD_NETtel tristate "CFI flash device on SnapGear/SecureEdge" depends on X86 && MTD_PARTITIONS && MTD_JEDECPROBE @@ -209,8 +252,8 @@ config MTD_NETtel Support for flash chips on NETtel/SecureEdge/SnapGear boards. config MTD_ALCHEMY - tristate ' AMD Alchemy Pb1xxx/Db1xxx/RDK MTD support' - depends on MIPS && SOC_AU1X00 + tristate "AMD Alchemy Pb1xxx/Db1xxx/RDK MTD support" + depends on SOC_AU1X00 && MTD_PARTITIONS && MTD_CFI help Flash memory access on AMD Alchemy Pb/Db/RDK Reference Boards @@ -241,14 +284,14 @@ config MTD_L440GX config MTD_SBC8240 tristate "Flash device on SBC8240" - depends on PPC32 && MTD_JEDECPROBE && 6xx && 8260 + depends on MTD_JEDECPROBE && 8260 help Flash access on the SBC8240 board from Wind River. See config MTD_TQM8XXL tristate "CFI Flash device mapped on TQM8XXL" - depends on MTD_CFI && PPC32 && 8xx && TQM8xxL + depends on MTD_CFI && TQM8xxL help The TQM8xxL PowerPC board has up to two banks of CFI-compliant chips, currently uses AMD one. This 'mapping' driver supports @@ -258,7 +301,7 @@ config MTD_TQM8XXL config MTD_RPXLITE tristate "CFI Flash device mapped on RPX Lite or CLLF" - depends on MTD_CFI && PPC32 && 8xx && (RPXCLASSIC || RPXLITE) + depends on MTD_CFI && (RPXCLASSIC || RPXLITE) help The RPXLite PowerPC board has CFI-compliant chips mapped in a strange sparse mapping. This 'mapping' driver supports that @@ -268,7 +311,7 @@ config MTD_RPXLITE config MTD_MBX860 tristate "System flash on MBX860 board" - depends on MTD_CFI && PPC32 && 8xx && MBX + depends on MTD_CFI && MBX help This enables access routines for the flash chips on the Motorola MBX860 board. If you have one of these boards and would like @@ -276,7 +319,7 @@ config MTD_MBX860 config MTD_DBOX2 tristate "CFI Flash device mapped on D-Box2" - depends on PPC32 && 8xx && DBOX2 && MTD_CFI_INTELSTD && MTD_CFI_INTELEXT && MTD_CFI_AMDSTD + depends on DBOX2 && MTD_CFI_INTELSTD && MTD_CFI_INTELEXT && MTD_CFI_AMDSTD help This enables access routines for the flash chips on the Nokia/Sagem D-Box 2 board. If you have one of these boards and would like to use @@ -284,30 +327,14 @@ config MTD_DBOX2 config MTD_CFI_FLAGADM tristate "CFI Flash device mapping on FlagaDM" - depends on PPC32 && 8xx && MTD_CFI + depends on 8xx && MTD_CFI help Mapping for the Flaga digital module. If you don't have one, ignore this setting. -config MTD_BEECH - tristate "CFI Flash device mapped on IBM 405LP Beech" - depends on MTD_CFI && PPC32 && 40x && BEECH - help - This enables access routines for the flash chips on the IBM - 405LP Beech board. If you have one of these boards and would like - to use the flash chips on it, say 'Y'. - -config MTD_ARCTIC - tristate "CFI Flash device mapped on IBM 405LP Arctic" - depends on MTD_CFI && PPC32 && 40x && ARCTIC2 - help - This enables access routines for the flash chips on the IBM 405LP - Arctic board. If you have one of these boards and would like to - use the flash chips on it, say 'Y'. - config MTD_WALNUT tristate "Flash device mapped on IBM 405GP Walnut" - depends on MTD_JEDECPROBE && PPC32 && 40x && WALNUT + depends on MTD_JEDECPROBE && WALNUT && !PPC_MERGE help This enables access routines for the flash chips on the IBM 405GP Walnut board. If you have one of these boards and would like to @@ -315,7 +342,7 @@ config MTD_WALNUT config MTD_EBONY tristate "Flash devices mapped on IBM 440GP Ebony" - depends on MTD_JEDECPROBE && PPC32 && 44x && EBONY + depends on MTD_JEDECPROBE && EBONY && !PPC_MERGE help This enables access routines for the flash chips on the IBM 440GP Ebony board. If you have one of these boards and would like to @@ -323,7 +350,7 @@ config MTD_EBONY config MTD_OCOTEA tristate "Flash devices mapped on IBM 440GX Ocotea" - depends on MTD_CFI && PPC32 && 44x && OCOTEA + depends on MTD_CFI && OCOTEA && !PPC_MERGE help This enables access routines for the flash chips on the IBM 440GX Ocotea board. If you have one of these boards and would like to @@ -331,67 +358,15 @@ config MTD_OCOTEA config MTD_REDWOOD tristate "CFI Flash devices mapped on IBM Redwood" - depends on MTD_CFI && PPC32 && 4xx && 40x && ( REDWOOD_4 || REDWOOD_5 || REDWOOD_6 ) + depends on MTD_CFI && ( REDWOOD_4 || REDWOOD_5 || REDWOOD_6 ) help This enables access routines for the flash chips on the IBM Redwood board. If you have one of these boards and would like to use the flash chips on it, say 'Y'. -config MTD_CSTM_MIPS_IXX - tristate "Flash chip mapping on ITE QED-4N-S01B, Globespan IVR or custom board" - depends on MIPS && MTD_CFI && MTD_JEDECPROBE && MTD_PARTITIONS - help - This provides a mapping driver for the Integrated Technology - Express, Inc (ITE) QED-4N-S01B eval board and the Globespan IVR - Reference Board. It provides the necessary addressing, length, - buswidth, vpp code and addition setup of the flash device for - these boards. In addition, this mapping driver can be used for - other boards via setting of the CONFIG_MTD_CSTM_MIPS_IXX_START/ - LEN/BUSWIDTH parameters. This mapping will provide one mtd device - using one partition. The start address can be offset from the - beginning of flash and the len can be less than the total flash - device size to allow a window into the flash. Both CFI and JEDEC - probes are called. - -config MTD_CSTM_MIPS_IXX_START - hex "Physical start address of flash mapping" - depends on MTD_CSTM_MIPS_IXX - default "0x8000000" - help - This is the physical memory location that the MTD driver will - use for the flash chips on your particular target board. - Refer to the memory map which should hopefully be in the - documentation for your board. - -config MTD_CSTM_MIPS_IXX_LEN - hex "Physical length of flash mapping" - depends on MTD_CSTM_MIPS_IXX - default "0x4000000" - help - This is the total length that the MTD driver will use for the - flash chips on your particular board. Refer to the memory - map which should hopefully be in the documentation for your - board. - -config MTD_CSTM_MIPS_IXX_BUSWIDTH - int "Bus width in octets" - depends on MTD_CSTM_MIPS_IXX - default "2" - help - This is the total bus width of the mapping of the flash chips - on your particular board. - -config MTD_OCELOT - tristate "Momenco Ocelot boot flash device" - depends on MIPS && MOMENCO_OCELOT - help - This enables access routines for the boot flash device and for the - NVRAM on the Momenco Ocelot board. If you have one of these boards - and would like access to either of these, say 'Y'. - config MTD_SOLUTIONENGINE tristate "CFI Flash device mapped on Hitachi SolutionEngine" - depends on SUPERH && MTD_CFI && MTD_REDBOOT_PARTS + depends on SUPERH && SOLUTION_ENGINE && MTD_CFI && MTD_REDBOOT_PARTS help This enables access to the flash chips on the Hitachi SolutionEngine and similar boards. Say 'Y' if you are building a kernel for such a board. @@ -402,14 +377,14 @@ config MTD_ARM_INTEGRATOR config MTD_CDB89712 tristate "Cirrus CDB89712 evaluation board mappings" - depends on ARM && MTD_CFI && ARCH_CDB89712 + depends on MTD_CFI && ARCH_CDB89712 help This enables access to the flash or ROM chips on the CDB89712 board. If you have such a board, say 'Y'. config MTD_SA1100 tristate "CFI Flash device mapped on StrongARM SA11x0" - depends on ARM && MTD_CFI && ARCH_SA1100 && MTD_PARTITIONS + depends on MTD_CFI && ARCH_SA1100 && MTD_PARTITIONS help This enables access to the flash chips on most platforms based on the SA1100 and SA1110, including the Assabet and the Compaq iPAQ. @@ -417,69 +392,53 @@ config MTD_SA1100 config MTD_IPAQ tristate "CFI Flash device mapped on Compaq/HP iPAQ" - depends on ARM && IPAQ_HANDHELD && MTD_CFI + depends on IPAQ_HANDHELD && MTD_CFI help This provides a driver for the on-board flash of the iPAQ. config MTD_DC21285 tristate "CFI Flash device mapped on DC21285 Footbridge" - depends on ARM && MTD_CFI && ARCH_FOOTBRIDGE && MTD_COMPLEX_MAPPINGS + depends on MTD_CFI && ARCH_FOOTBRIDGE && MTD_COMPLEX_MAPPINGS help This provides a driver for the flash accessed using Intel's 21285 bridge used with Intel's StrongARM processors. More info at . -config MTD_IQ80310 - tristate "CFI Flash device mapped on the XScale IQ80310 board" - depends on ARM && MTD_CFI && ARCH_IQ80310 - help - This enables access routines for the flash chips on the Intel XScale - IQ80310 evaluation board. If you have one of these boards and would - like to use the flash chips on it, say 'Y'. - config MTD_IXP4XX tristate "CFI Flash device mapped on Intel IXP4xx based systems" - depends on ARM && MTD_CFI && MTD_COMPLEX_MAPPINGS && ARCH_IXP4XX + depends on MTD_CFI && MTD_COMPLEX_MAPPINGS && ARCH_IXP4XX help - This enables MTD access to flash devices on platforms based + This enables MTD access to flash devices on platforms based on Intel's IXP4xx family of network processors such as the IXDP425 and Coyote. If you have an IXP4xx based board and would like to use the flash chips on it, say 'Y'. config MTD_IXP2000 tristate "CFI Flash device mapped on Intel IXP2000 based systems" - depends on ARM && MTD_CFI && MTD_COMPLEX_MAPPINGS && ARCH_IXP2000 + depends on MTD_CFI && MTD_COMPLEX_MAPPINGS && ARCH_IXP2000 help - This enables MTD access to flash devices on platforms based + This enables MTD access to flash devices on platforms based on Intel's IXP2000 family of network processors such as the IXDP425 and Coyote. If you have an IXP2000 based board and would like to use the flash chips on it, say 'Y'. -config MTD_EPXA10DB - tristate "CFI Flash device mapped on Epxa10db" - depends on ARM && MTD_CFI && MTD_PARTITIONS && ARCH_CAMELOT - help - This enables support for the flash devices on the Altera - Excalibur XA10 Development Board. If you are building a kernel - for on of these boards then you should say 'Y' otherwise say 'N'. - config MTD_FORTUNET tristate "CFI Flash device mapped on the FortuNet board" - depends on ARM && MTD_CFI && MTD_PARTITIONS && SA1100_FORTUNET + depends on MTD_CFI && MTD_PARTITIONS && SA1100_FORTUNET help This enables access to the Flash on the FortuNet board. If you have such a board, say 'Y'. config MTD_AUTCPU12 tristate "NV-RAM mapping AUTCPU12 board" - depends on ARM && ARCH_AUTCPU12 + depends on ARCH_AUTCPU12 help This enables access to the NV-RAM on autronix autcpu12 board. If you have such a board, say 'Y'. config MTD_EDB7312 tristate "CFI Flash device mapped on EDB7312" - depends on ARM && MTD_CFI + depends on ARCH_EDB7312 && MTD_CFI help This enables access to the CFI Flash on the Cogent EDB7312 board. If you have such a board, say 'Y' here. @@ -493,7 +452,7 @@ config MTD_IMPA7 config MTD_CEIVA tristate "JEDEC Flash device mapped on Ceiva/Polaroid PhotoMax Digital Picture Frame" - depends on ARM && MTD_JEDECPROBE && ARCH_CEIVA + depends on MTD_JEDECPROBE && ARCH_CEIVA help This enables access to the flash chips on the Ceiva/Polaroid PhotoMax Digital Picture Frame. @@ -501,31 +460,18 @@ config MTD_CEIVA config MTD_NOR_TOTO tristate "NOR Flash device on TOTO board" - depends on ARM && ARCH_OMAP && OMAP_TOTO + depends on ARCH_OMAP && OMAP_TOTO help This enables access to the NOR flash on the Texas Instruments TOTO board. config MTD_H720X tristate "Hynix evaluation board mappings" - depends on ARM && MTD_CFI && ( ARCH_H7201 || ARCH_H7202 ) + depends on MTD_CFI && ( ARCH_H7201 || ARCH_H7202 ) help This enables access to the flash chips on the Hynix evaluation boards. If you have such a board, say 'Y'. -config MTD_MPC1211 - tristate "CFI Flash device mapped on Interface MPC-1211" - depends on SUPERH && SH_MPC1211 && MTD_CFI - help - This enables access to the flash chips on the Interface MPC-1211(CTP/PCI/MPC-SH02). - If you have such a board, say 'Y'. - -config MTD_PQ2FADS - tristate "JEDEC flash SIMM mapped on PQ2FADS and 8272ADS boards" - depends on (ADS8272 || PQ2FADS) && MTD_PARTITIONS && MTD_JEDECPROBE && MTD_PHYSMAP && MTD_CFI_GEOMETRY && MTD_CFI_INTELEXT - help - This enables access to flash SIMM on PQ2FADS-like boards - config MTD_OMAP_NOR tristate "TI OMAP board mappings" depends on MTD_CFI && ARCH_OMAP @@ -538,7 +484,7 @@ config MTD_OMAP_NOR # This needs CFI or JEDEC, depending on the cards found. config MTD_PCI tristate "PCI MTD driver" - depends on MTD && PCI && MTD_COMPLEX_MAPPINGS + depends on PCI && MTD_COMPLEX_MAPPINGS help Mapping for accessing flash devices on add-in cards like the Intel XScale IQ80310 card, and the Intel EBSA285 card in blank ROM programming mode @@ -548,7 +494,7 @@ config MTD_PCI config MTD_PCMCIA tristate "PCMCIA MTD driver" - depends on MTD && PCMCIA && MTD_COMPLEX_MAPPINGS && BROKEN + depends on PCMCIA && MTD_COMPLEX_MAPPINGS && BROKEN help Map driver for accessing PCMCIA linear flash memory cards. These cards are usually around 4-16MiB in size. This does not include @@ -557,13 +503,23 @@ config MTD_PCMCIA config MTD_PCMCIA_ANONYMOUS bool "Use PCMCIA MTD drivers for anonymous PCMCIA cards" depends on MTD_PCMCIA - default N help If this option is enabled, PCMCIA cards which do not report anything about themselves are assumed to be MTD cards. If unsure, say N. +config MTD_BFIN_ASYNC + tristate "Blackfin BF533-STAMP Flash Chip Support" + depends on BFIN533_STAMP && MTD_CFI + select MTD_PARTITIONS + default y + help + Map driver which allows for simultaneous utilization of + ethernet and CFI parallel flash. + + If compiled as a module, it will be called bfin-async-flash. + config MTD_UCLINUX tristate "Generic uClinux RAM/ROM filesystem support" depends on MTD_PARTITIONS && !MMU @@ -593,33 +549,21 @@ config MTD_DMV182 help Map driver for Dy-4 SVME/DMV-182 board. -config MTD_BAST - tristate "Map driver for Simtec BAST (EB2410ITX) or Thorcom VR1000" - depends on ARCH_BAST || MACH_VR1000 - select MTD_PARTITIONS - select MTD_MAP_BANK_WIDTH_16 - select MTD_JEDECPROBE - help - Map driver for NOR flash on the Simtec BAST (EB2410ITX), or the - Thorcom VR1000 - - Note, this driver *cannot* over-ride the WP link on the - board, or currently detect the state of the link. - -config MTD_BAST_MAXSIZE - int "Maximum size for BAST flash area (MiB)" - depends on MTD_BAST - default "4" - config MTD_SHARP_SL - bool "ROM maped on Sharp SL Series" - depends on MTD && ARCH_PXA + tristate "ROM mapped on Sharp SL Series" + depends on ARCH_PXA help This enables access to the flash chip on the Sharp SL Series of PDAs. +config MTD_INTEL_VR_NOR + tristate "NOR flash on Intel Vermilion Range Expansion Bus CS0" + depends on PCI + help + Map driver for a NOR flash bank located on the Expansion Bus of the + Intel Vermilion Range chipset. + config MTD_PLATRAM tristate "Map driver for platform device RAM (mtd-ram)" - depends on MTD select MTD_RAM help Map driver for RAM areas described via the platform device