X-Git-Url: http://ftp.safe.ca/?a=blobdiff_plain;f=drivers%2Fmisc%2FKconfig;h=6d1ac180f6ee8013b212ff06bf6dca6ff475b1cb;hb=7d85ccd816535f56880f7dfdb4de056794376b2c;hp=ce67d973d349df0f76ed5a5eccb9836fdc604469;hpb=89bcb05d9bbf8bd559988bca4f2579defd28d008;p=safe%2Fjmp%2Flinux-2.6 diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index ce67d97..6d1ac18 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -15,11 +15,11 @@ if MISC_DEVICES config ATMEL_PWM tristate "Atmel AT32/AT91 PWM support" - depends on AVR32 || ARCH_AT91 + depends on AVR32 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91CAP9 help This option enables device driver support for the PWM channels - on certain Atmel prcoessors. Pulse Width Modulation is used for - purposes including software controlled power-efficent backlights + on certain Atmel processors. Pulse Width Modulation is used for + purposes including software controlled power-efficient backlights on LCD displays, motor control, and waveform generation. config ATMEL_TCLIB @@ -77,22 +77,16 @@ config IBM_ASM for your IBM server. config PHANTOM - tristate "Sensable PHANToM" + tristate "Sensable PHANToM (PCI)" depends on PCI help Say Y here if you want to build a driver for Sensable PHANToM device. + This driver is only for PCI PHANToMs. + If you choose to build module, its name will be phantom. If unsure, say N here. -config EEPROM_93CX6 - tristate "EEPROM 93CX6 support" - ---help--- - This is a driver for the EEPROM chipsets 93c46 and 93c66. - The driver supports both read as well as write commands. - - If unsure, say N. - config SGI_IOC4 tristate "SGI IOC4 Base IO support" depends on PCI @@ -118,7 +112,7 @@ config TIFM_CORE cards are supported via 'MMC/SD Card support: TI Flash Media MMC/SD Interface support (MMC_TIFM_SD)'. - To compile this driver as a module, choose M here: the module will + To compile this driver as a module, choose M here: the module will be called tifm_core. config TIFM_7XX1 @@ -131,243 +125,24 @@ config TIFM_7XX1 To make actual use of the device, you will have to select some flash card format drivers, as outlined in the TIFM_CORE Help. - To compile this driver as a module, choose M here: the module will + To compile this driver as a module, choose M here: the module will be called tifm_7xx1. -config ACER_WMI - tristate "Acer WMI Laptop Extras (EXPERIMENTAL)" - depends on X86 - depends on EXPERIMENTAL - depends on ACPI - depends on LEDS_CLASS - depends on NEW_LEDS - depends on BACKLIGHT_CLASS_DEVICE - depends on SERIO_I8042 - select ACPI_WMI - ---help--- - This is a driver for newer Acer (and Wistron) laptops. It adds - wireless radio and bluetooth control, and on some laptops, - exposes the mail LED and LCD backlight. - - For more information about this driver see - - - If you have an ACPI-WMI compatible Acer/ Wistron laptop, say Y or M - here. - -config ASUS_LAPTOP - tristate "Asus Laptop Extras (EXPERIMENTAL)" - depends on X86 - depends on ACPI - depends on EXPERIMENTAL && !ACPI_ASUS - depends on LEDS_CLASS - depends on NEW_LEDS - depends on BACKLIGHT_CLASS_DEVICE - ---help--- - This is the new Linux driver for Asus laptops. It may also support some - MEDION, JVC or VICTOR laptops. It makes all the extra buttons generate - standard ACPI events that go through /proc/acpi/events. It also adds - support for video output switching, LCD backlight control, Bluetooth and - Wlan control, and most importantly, allows you to blink those fancy LEDs. - - For more information and a userspace daemon for handling the extra - buttons see . - - If you have an ACPI-compatible ASUS laptop, say Y or M here. - -config FUJITSU_LAPTOP - tristate "Fujitsu Laptop Extras" - depends on X86 - depends on ACPI - depends on INPUT - depends on BACKLIGHT_CLASS_DEVICE - ---help--- - This is a driver for laptops built by Fujitsu: - - * P2xxx/P5xxx/S6xxx/S7xxx series Lifebooks - * Possibly other Fujitsu laptop models - * Tested with S6410 and S7020 - - It adds support for LCD brightness control and some hotkeys. - - If you have a Fujitsu laptop, say Y or M here. - -config FUJITSU_LAPTOP_DEBUG - bool "Verbose debug mode for Fujitsu Laptop Extras" - depends on FUJITSU_LAPTOP - default n - ---help--- - Enables extra debug output from the fujitsu extras driver, at the - expense of a slight increase in driver size. - - If you are not sure, say N here. - -config TC1100_WMI - tristate "HP Compaq TC1100 Tablet WMI Extras (EXPERIMENTAL)" - depends on X86 && !X86_64 - depends on EXPERIMENTAL - depends on ACPI - select ACPI_WMI - ---help--- - This is a driver for the WMI extensions (wireless and bluetooth power - control) of the HP Compaq TC1100 tablet. - -config MSI_LAPTOP - tristate "MSI Laptop Extras" - depends on X86 - depends on ACPI_EC - depends on BACKLIGHT_CLASS_DEVICE - ---help--- - This is a driver for laptops built by MSI (MICRO-STAR - INTERNATIONAL): - - MSI MegaBook S270 (MS-1013) - Cytron/TCM/Medion/Tchibo MD96100/SAM2000 - - It adds support for Bluetooth, WLAN and LCD brightness control. - - More information about this driver is available at - . - - If you have an MSI S270 laptop, say Y or M here. - -config COMPAL_LAPTOP - tristate "Compal Laptop Extras" - depends on X86 - depends on ACPI_EC - depends on BACKLIGHT_CLASS_DEVICE - ---help--- - This is a driver for laptops built by Compal: - - Compal FL90/IFL90 - Compal FL91/IFL91 - Compal FL92/JFL92 - Compal FT00/IFT00 - - It adds support for Bluetooth, WLAN and LCD brightness control. - - If you have an Compal FL9x/IFL9x/FT00 laptop, say Y or M here. - -config SONY_LAPTOP - tristate "Sony Laptop Extras" - depends on X86 && ACPI - select BACKLIGHT_CLASS_DEVICE - depends on INPUT - ---help--- - This mini-driver drives the SNC and SPIC devices present in the ACPI - BIOS of the Sony Vaio laptops. - - It gives access to some extra laptop functionalities like Bluetooth, - screen brightness control, Fn keys and allows powering on/off some - devices. - - Read for more information. - -config SONYPI_COMPAT - bool "Sonypi compatibility" - depends on SONY_LAPTOP - ---help--- - Build the sonypi driver compatibility code into the sony-laptop driver. - -config THINKPAD_ACPI - tristate "ThinkPad ACPI Laptop Extras" - depends on X86 && ACPI - select BACKLIGHT_LCD_SUPPORT - select BACKLIGHT_CLASS_DEVICE - select HWMON - select NVRAM - select INPUT - select NEW_LEDS - select LEDS_CLASS - ---help--- - This is a driver for the IBM and Lenovo ThinkPad laptops. It adds - support for Fn-Fx key combinations, Bluetooth control, video - output switching, ThinkLight control, UltraBay eject and more. - For more information about this driver see - and - . - - This driver was formerly known as ibm-acpi. - - If you have an IBM or Lenovo ThinkPad laptop, say Y or M here. - -config THINKPAD_ACPI_DEBUG - bool "Verbose debug mode" - depends on THINKPAD_ACPI - default n - ---help--- - Enables extra debugging information, at the expense of a slightly - increase in driver size. - - If you are not sure, say N here. - -config THINKPAD_ACPI_DOCK - bool "Legacy Docking Station Support" - depends on THINKPAD_ACPI - depends on ACPI_DOCK=n - default n - ---help--- - Allows the thinkpad_acpi driver to handle docking station events. - This support was made obsolete by the generic ACPI docking station - support (CONFIG_ACPI_DOCK). It will allow locking and removing the - laptop from the docking station, but will not properly connect PCI - devices. - - If you are not sure, say N here. - -config THINKPAD_ACPI_BAY - bool "Legacy Removable Bay Support" - depends on THINKPAD_ACPI - default y - ---help--- - Allows the thinkpad_acpi driver to handle removable bays. It will - electrically disable the device in the bay, and also generate - notifications when the bay lever is ejected or inserted. - - If you are not sure, say Y here. - -config THINKPAD_ACPI_VIDEO - bool "Video output control support" - depends on THINKPAD_ACPI - default y - ---help--- - Allows the thinkpad_acpi driver to provide an interface to control - the various video output ports. - - This feature often won't work well, depending on ThinkPad model, - display state, video output devices in use, whether there is a X - server running, phase of the moon, and the current mood of - Schroedinger's cat. If you can use X.org's RandR to control - your ThinkPad's video output ports instead of this feature, - don't think twice: do it and say N here to save some memory. - - If you are not sure, say Y here. - -config THINKPAD_ACPI_HOTKEY_POLL - bool "Suport NVRAM polling for hot keys" - depends on THINKPAD_ACPI - default y - ---help--- - Some thinkpad models benefit from NVRAM polling to detect a few of - the hot key press events. If you know your ThinkPad model does not - need to do NVRAM polling to support any of the hot keys you use, - unselecting this option will save about 1kB of memory. - - ThinkPads T40 and newer, R52 and newer, and X31 and newer are - unlikely to need NVRAM polling in their latest BIOS versions. - - NVRAM polling can detect at most the following keys: ThinkPad/Access - IBM, Zoom, Switch Display (fn+F7), ThinkLight, Volume up/down/mute, - Brightness up/down, Display Expand (fn+F8), Hibernate (fn+F12). +config ICS932S401 + tristate "Integrated Circuits ICS932S401" + depends on I2C && EXPERIMENTAL + help + If you say yes here you get support for the Integrated Circuits + ICS932S401 clock control chips. - If you are not sure, say Y here. The driver enables polling only if - it is strictly necessary to do so. + This driver can also be built as a module. If so, the module + will be called ics932s401. config ATMEL_SSC tristate "Device driver for Atmel SSC peripheral" depends on AVR32 || ARCH_AT91 ---help--- - This option enables device driver support for Atmel Syncronized + This option enables device driver support for Atmel Synchronized Serial Communication peripheral (SSC). The SSC peripheral supports a wide variety of serial frame based @@ -375,30 +150,6 @@ config ATMEL_SSC If unsure, say N. -config INTEL_MENLOW - tristate "Thermal Management driver for Intel menlow platform" - depends on ACPI_THERMAL - select THERMAL - depends on X86 - ---help--- - ACPI thermal management enhancement driver on - Intel Menlow platform. - - If unsure, say N. - -config EEEPC_LAPTOP - tristate "Eee PC Hotkey Driver (EXPERIMENTAL)" - depends on X86 - depends on ACPI - depends on BACKLIGHT_CLASS_DEVICE - depends on HWMON - depends on EXPERIMENTAL - ---help--- - This driver supports the Fn-Fx keys on Eee PC laptops. - It also adds the ability to switch camera/wlan on/off. - - If you have an Eee PC laptop, say Y or M here. - config ENCLOSURE_SERVICES tristate "Enclosure Services" default n @@ -410,9 +161,11 @@ config ENCLOSURE_SERVICES config SGI_XP tristate "Support communication between SGI SSIs" - depends on IA64_GENERIC || IA64_SGI_SN2 + depends on NET + depends on (IA64_GENERIC || IA64_SGI_SN2 || IA64_SGI_UV || X86_UV) && SMP select IA64_UNCACHED_ALLOCATOR if IA64_GENERIC || IA64_SGI_SN2 select GENERIC_ALLOCATOR if IA64_GENERIC || IA64_SGI_SN2 + select SGI_GRU if X86_64 && SMP ---help--- An SGI machine can be divided into multiple Single System Images which act independently of each other and have @@ -422,6 +175,7 @@ config SGI_XP config HP_ILO tristate "Channel interface driver for HP iLO/iLO2 processor" + depends on PCI default n help The channel interface driver allows applications to communicate @@ -433,4 +187,53 @@ config HP_ILO To compile this driver as a module, choose M here: the module will be called hpilo. +config SGI_GRU + tristate "SGI GRU driver" + depends on X86_UV && SMP + default n + select MMU_NOTIFIER + ---help--- + The GRU is a hardware resource located in the system chipset. The GRU + contains memory that can be mmapped into the user address space. This memory is + used to communicate with the GRU to perform functions such as load/store, + scatter/gather, bcopy, AMOs, etc. The GRU is directly accessed by user + instructions using user virtual addresses. GRU instructions (ex., bcopy) use + user virtual addresses for operands. + + If you are not running on a SGI UV system, say N. + +config SGI_GRU_DEBUG + bool "SGI GRU driver debug" + depends on SGI_GRU + default n + ---help--- + This option enables addition debugging code for the SGI GRU driver. If + you are unsure, say N. + +config DELL_LAPTOP + tristate "Dell Laptop Extras (EXPERIMENTAL)" + depends on X86 + depends on DCDBAS + depends on EXPERIMENTAL + depends on BACKLIGHT_CLASS_DEVICE + depends on RFKILL + depends on POWER_SUPPLY + default n + ---help--- + This driver adds support for rfkill and backlight control to Dell + laptops. + +config ISL29003 + tristate "Intersil ISL29003 ambient light sensor" + depends on I2C && SYSFS + help + If you say yes here you get support for the Intersil ISL29003 + ambient light sensor. + + This driver can also be built as a module. If so, the module + will be called isl29003. + +source "drivers/misc/c2port/Kconfig" +source "drivers/misc/eeprom/Kconfig" + endif # MISC_DEVICES