X-Git-Url: http://ftp.safe.ca/?a=blobdiff_plain;f=drivers%2Fmisc%2FKconfig;h=233886d00861384135e67e9ec19c93db9374aa9a;hb=c74cba610c9559e72377fd9725a3d329581aa256;hp=396d935012f2d5bae33b3bb623b4b54701383c99;hpb=3ddeb51d9c83931c1ca6abf76a38934c5a1ed918;p=safe%2Fjmp%2Flinux-2.6 diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index 396d935..233886d0 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -13,13 +13,53 @@ menuconfig MISC_DEVICES if MISC_DEVICES +config AD525X_DPOT + tristate "Analog Devices Digital Potentiometers" + depends on (I2C || SPI) && SYSFS + help + If you say yes here, you get support for the Analog Devices + AD5258, AD5259, AD5251, AD5252, AD5253, AD5254, AD5255 + AD5160, AD5161, AD5162, AD5165, AD5200, AD5201, AD5203, + AD5204, AD5206, AD5207, AD5231, AD5232, AD5233, AD5235, + AD5260, AD5262, AD5263, AD5290, AD5291, AD5292, AD5293, + AD7376, AD8400, AD8402, AD8403, ADN2850, AD5241, AD5242, + AD5243, AD5245, AD5246, AD5247, AD5248, AD5280, AD5282, + ADN2860 + digital potentiometer chips. + + See Documentation/misc-devices/ad525x_dpot.txt for the + userspace interface. + + This driver can also be built as a module. If so, the module + will be called ad525x_dpot. + +config AD525X_DPOT_I2C + tristate "support I2C bus connection" + depends on AD525X_DPOT && I2C + help + Say Y here if you have a digital potentiometers hooked to an I2C bus. + + To compile this driver as a module, choose M here: the + module will be called ad525x_dpot-i2c. + +config AD525X_DPOT_SPI + tristate "support SPI bus connection" + depends on AD525X_DPOT && SPI_MASTER + help + Say Y here if you have a digital potentiometers hooked to an SPI bus. + + If unsure, say N (but it's safe to say "Y"). + + To compile this driver as a module, choose M here: the + module will be called ad525x_dpot-spi. + config ATMEL_PWM tristate "Atmel AT32/AT91 PWM support" depends on AVR32 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91CAP9 help This option enables device driver support for the PWM channels - on certain Atmel prcoessors. Pulse Width Modulation is used for - purposes including software controlled power-efficent backlights + on certain Atmel processors. Pulse Width Modulation is used for + purposes including software controlled power-efficient backlights on LCD displays, motor control, and waveform generation. config ATMEL_TCLIB @@ -142,7 +182,7 @@ config ATMEL_SSC tristate "Device driver for Atmel SSC peripheral" depends on AVR32 || ARCH_AT91 ---help--- - This option enables device driver support for Atmel Syncronized + This option enables device driver support for Atmel Synchronized Serial Communication peripheral (SSC). The SSC peripheral supports a wide variety of serial frame based @@ -165,7 +205,7 @@ config SGI_XP depends on (IA64_GENERIC || IA64_SGI_SN2 || IA64_SGI_UV || X86_UV) && SMP select IA64_UNCACHED_ALLOCATOR if IA64_GENERIC || IA64_SGI_SN2 select GENERIC_ALLOCATOR if IA64_GENERIC || IA64_SGI_SN2 - select SGI_GRU if (IA64_GENERIC || IA64_SGI_UV || X86_64) && SMP + select SGI_GRU if X86_64 && SMP ---help--- An SGI machine can be divided into multiple Single System Images which act independently of each other and have @@ -173,6 +213,40 @@ config SGI_XP this feature will allow for direct communication between SSIs based on a network adapter and DMA messaging. +config CS5535_MFGPT + tristate "CS5535/CS5536 Geode Multi-Function General Purpose Timer (MFGPT) support" + depends on PCI + depends on X86 + default n + help + This driver provides access to MFGPT functionality for other + drivers that need timers. MFGPTs are available in the CS5535 and + CS5536 companion chips that are found in AMD Geode and several + other platforms. They have a better resolution and max interval + than the generic PIT, and are suitable for use as high-res timers. + You probably don't want to enable this manually; other drivers that + make use of it should enable it. + +config CS5535_MFGPT_DEFAULT_IRQ + int + depends on CS5535_MFGPT + default 7 + help + MFGPTs on the CS5535 require an interrupt. The selected IRQ + can be overridden as a module option as well as by driver that + use the cs5535_mfgpt_ API; however, different architectures might + want to use a different IRQ by default. This is here for + architectures to set as necessary. + +config CS5535_CLOCK_EVENT_SRC + tristate "CS5535/CS5536 high-res timer (MFGPT) events" + depends on GENERIC_TIME && GENERIC_CLOCKEVENTS && CS5535_MFGPT + help + This driver provides a clock event source based on the MFGPT + timer(s) in the CS5535 and CS5536 companion chips. + MFGPTs have a better resolution and max interval than the + generic PIT, and are suitable for use as high-res timers. + config HP_ILO tristate "Channel interface driver for HP iLO/iLO2 processor" depends on PCI @@ -189,7 +263,7 @@ config HP_ILO config SGI_GRU tristate "SGI GRU driver" - depends on (X86_UV || IA64_SGI_UV || IA64_GENERIC) && SMP + depends on X86_UV && SMP default n select MMU_NOTIFIER ---help--- @@ -210,19 +284,78 @@ config SGI_GRU_DEBUG This option enables addition debugging code for the SGI GRU driver. If you are unsure, say N. -config DELL_LAPTOP - tristate "Dell Laptop Extras (EXPERIMENTAL)" +config ISL29003 + tristate "Intersil ISL29003 ambient light sensor" + depends on I2C && SYSFS + help + If you say yes here you get support for the Intersil ISL29003 + ambient light sensor. + + This driver can also be built as a module. If so, the module + will be called isl29003. + +config SENSORS_TSL2550 + tristate "Taos TSL2550 ambient light sensor" + depends on I2C && SYSFS + help + If you say yes here you get support for the Taos TSL2550 + ambient light sensor. + + This driver can also be built as a module. If so, the module + will be called tsl2550. + +config EP93XX_PWM + tristate "EP93xx PWM support" + depends on ARCH_EP93XX + help + This option enables device driver support for the PWM channels + on the Cirrus EP93xx processors. The EP9307 chip only has one + PWM channel all the others have two, the second channel is an + alternate function of the EGPIO14 pin. A sysfs interface is + provided to control the PWM channels. + + To compile this driver as a module, choose M here: the module will + be called ep93xx_pwm. + +config DS1682 + tristate "Dallas DS1682 Total Elapsed Time Recorder with Alarm" + depends on I2C && EXPERIMENTAL + help + If you say yes here you get support for Dallas Semiconductor + DS1682 Total Elapsed Time Recorder. + + This driver can also be built as a module. If so, the module + will be called ds1682. + +config TI_DAC7512 + tristate "Texas Instruments DAC7512" + depends on SPI && SYSFS + help + If you say yes here you get support for the Texas Instruments + DAC7512 16-bit digital-to-analog converter. + + This driver can also be built as a module. If so, the module + will be calles ti_dac7512. + +config VMWARE_BALLOON + tristate "VMware Balloon Driver" depends on X86 - depends on DCDBAS - depends on EXPERIMENTAL - depends on BACKLIGHT_CLASS_DEVICE - depends on RFKILL - default n - ---help--- - This driver adds support for rfkill and backlight control to Dell - laptops. + help + This is VMware physical memory management driver which acts + like a "balloon" that can be inflated to reclaim physical pages + by reserving them in the guest and invalidating them in the + monitor, freeing up the underlying machine pages so they can + be allocated to other guests. The balloon can also be deflated + to allow the guest to use more physical memory. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called vmware_balloon. source "drivers/misc/c2port/Kconfig" source "drivers/misc/eeprom/Kconfig" +source "drivers/misc/cb710/Kconfig" +source "drivers/misc/iwmc3200top/Kconfig" endif # MISC_DEVICES