X-Git-Url: http://ftp.safe.ca/?a=blobdiff_plain;f=drivers%2Fmedia%2Fvideo%2Fsaa7134%2Fsaa7134-dvb.c;h=9f8730bc6e5fff3d07bf344d76ca956b0844aa74;hb=62ff817a04a5a08074c0391bdbf7bab48bdaa80e;hp=757796259cf99fe9f9662c1c1c8cde51ea4728c8;hpb=fbc81c072d832a0529bdb710404e7c9dc14f3043;p=safe%2Fjmp%2Flinux-2.6 diff --git a/drivers/media/video/saa7134/saa7134-dvb.c b/drivers/media/video/saa7134/saa7134-dvb.c index 7577962..9f8730b 100644 --- a/drivers/media/video/saa7134/saa7134-dvb.c +++ b/drivers/media/video/saa7134/saa7134-dvb.c @@ -33,29 +33,49 @@ #include "saa7134.h" #include #include "dvb-pll.h" - -#ifdef HAVE_MT352 -# include "mt352.h" -# include "mt352_priv.h" /* FIXME */ -#endif -#ifdef HAVE_TDA1004X -# include "tda1004x.h" -#endif -#ifdef HAVE_NXT200X -# include "nxt200x.h" -#endif +#include + +#include "mt352.h" +#include "mt352_priv.h" /* FIXME */ +#include "tda1004x.h" +#include "nxt200x.h" +#include "tuner-xc2028.h" + +#include "tda10086.h" +#include "tda826x.h" +#include "tda827x.h" +#include "isl6421.h" +#include "isl6405.h" +#include "lnbp21.h" +#include "tuner-simple.h" MODULE_AUTHOR("Gerd Knorr [SuSE Labs]"); MODULE_LICENSE("GPL"); -static unsigned int antenna_pwr = 0; +static unsigned int antenna_pwr; module_param(antenna_pwr, int, 0444); MODULE_PARM_DESC(antenna_pwr,"enable antenna power (Pinnacle 300i)"); -/* ------------------------------------------------------------------ */ +static int use_frontend; +module_param(use_frontend, int, 0644); +MODULE_PARM_DESC(use_frontend,"for cards with multiple frontends (0: terrestrial, 1: satellite)"); + +static int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Turn on/off module debugging (default:off)."); + +#define dprintk(fmt, arg...) do { if (debug) \ + printk(KERN_DEBUG "%s/dvb: " fmt, dev->name , ## arg); } while(0) + +/* Print a warning */ +#define wprintk(fmt, arg...) \ + printk(KERN_WARNING "%s/dvb: " fmt, dev->name, ## arg) + +/* ------------------------------------------------------------------ + * mt352 based DVB-T cards + */ -#ifdef HAVE_MT352 static int pinnacle_antenna_pwr(struct saa7134_dev *dev, int on) { u32 ok; @@ -76,8 +96,7 @@ static int pinnacle_antenna_pwr(struct saa7134_dev *dev, int on) saa_setl(SAA7134_GPIO_GPSTATUS0 >> 2, (1 << 28)); udelay(10); ok = saa_readl(SAA7134_GPIO_GPSTATUS0) & (1 << 27); - printk("%s: %s %s\n", dev->name, __FUNCTION__, - ok ? "on" : "off"); + dprintk("%s %s\n", __func__, ok ? "on" : "off"); if (!ok) saa_clearl(SAA7134_GPIO_GPSTATUS0 >> 2, (1 << 26)); @@ -97,7 +116,7 @@ static int mt352_pinnacle_init(struct dvb_frontend* fe) static u8 irq_cfg [] = { INTERRUPT_EN_0, 0x00, 0x00, 0x00, 0x00 }; struct saa7134_dev *dev= fe->dvb->priv; - printk("%s: %s called\n",dev->name,__FUNCTION__); + dprintk("%s called\n", __func__); mt352_write(fe, clock_config, sizeof(clock_config)); udelay(200); @@ -110,6 +129,7 @@ static int mt352_pinnacle_init(struct dvb_frontend* fe) mt352_write(fe, fsm_ctl_cfg, sizeof(fsm_ctl_cfg)); mt352_write(fe, scan_ctl_cfg, sizeof(scan_ctl_cfg)); mt352_write(fe, irq_cfg, sizeof(irq_cfg)); + return 0; } @@ -131,12 +151,13 @@ static int mt352_aver777_init(struct dvb_frontend* fe) return 0; } -static int mt352_pinnacle_pll_set(struct dvb_frontend* fe, - struct dvb_frontend_parameters* params, - u8* pllbuf) +static int mt352_pinnacle_tuner_set_params(struct dvb_frontend* fe, + struct dvb_frontend_parameters* params) { - static int on = TDA9887_PRESENT | TDA9887_PORT2_INACTIVE; - static int off = TDA9887_PRESENT | TDA9887_PORT2_ACTIVE; + u8 off[] = { 0x00, 0xf1}; + u8 on[] = { 0x00, 0x71}; + struct i2c_msg msg = {.addr=0x43, .flags=0, .buf=off, .len = sizeof(off)}; + struct saa7134_dev *dev = fe->dvb->priv; struct v4l2_frequency f; @@ -144,29 +165,19 @@ static int mt352_pinnacle_pll_set(struct dvb_frontend* fe, f.tuner = 0; f.type = V4L2_TUNER_DIGITAL_TV; f.frequency = params->frequency / 1000 * 16 / 1000; - saa7134_i2c_call_clients(dev,TDA9887_SET_CONFIG,&on); + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + i2c_transfer(&dev->i2c_adap, &msg, 1); saa7134_i2c_call_clients(dev,VIDIOC_S_FREQUENCY,&f); - saa7134_i2c_call_clients(dev,TDA9887_SET_CONFIG,&off); + msg.buf = on; + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + i2c_transfer(&dev->i2c_adap, &msg, 1); pinnacle_antenna_pwr(dev, antenna_pwr); /* mt352 setup */ - mt352_pinnacle_init(fe); - pllbuf[0] = 0xc2; - pllbuf[1] = 0x00; - pllbuf[2] = 0x00; - pllbuf[3] = 0x80; - pllbuf[4] = 0x00; - return 0; -} - -static int mt352_aver777_pll_set(struct dvb_frontend *fe, struct dvb_frontend_parameters *params, u8* pllbuf) -{ - pllbuf[0] = 0xc2; - dvb_pll_configure(&dvb_pll_philips_td1316, pllbuf+1, - params->frequency, - params->u.ofdm.bandwidth); - return 0; + return mt352_pinnacle_init(fe); } static struct mt352_config pinnacle_300i = { @@ -175,23 +186,38 @@ static struct mt352_config pinnacle_300i = { .if2 = 36150, .no_tuner = 1, .demod_init = mt352_pinnacle_init, - .pll_set = mt352_pinnacle_pll_set, }; static struct mt352_config avermedia_777 = { .demod_address = 0xf, .demod_init = mt352_aver777_init, - .pll_set = mt352_aver777_pll_set, }; -#endif -/* ------------------------------------------------------------------ */ +static struct mt352_config avermedia_e506r_mt352_dev = { + .demod_address = (0x1e >> 1), + .no_tuner = 1, +}; + +/* ================================================================== + * tda1004x based DVB-T cards, helper functions + */ + +static int philips_tda1004x_request_firmware(struct dvb_frontend *fe, + const struct firmware **fw, char *name) +{ + struct saa7134_dev *dev = fe->dvb->priv; + return request_firmware(fw, name, &dev->pci->dev); +} -#ifdef HAVE_TDA1004X +/* ------------------------------------------------------------------ + * these tuners are tu1216, td1316(a) + */ -static int philips_tda6651_pll_set(u8 addr, struct dvb_frontend *fe, struct dvb_frontend_parameters *params) +static int philips_tda6651_pll_set(struct dvb_frontend *fe, struct dvb_frontend_parameters *params) { struct saa7134_dev *dev = fe->dvb->priv; + struct tda1004x_state *state = fe->demodulator_priv; + u8 addr = state->config->tuner_address; u8 tuner_buf[4]; struct i2c_msg tuner_msg = {.addr = addr,.flags = 0,.buf = tuner_buf,.len = sizeof(tuner_buf) }; @@ -264,19 +290,28 @@ static int philips_tda6651_pll_set(u8 addr, struct dvb_frontend *fe, struct dvb_ tuner_buf[2] = 0xca; tuner_buf[3] = (cp << 5) | (filter << 3) | band; - if (i2c_transfer(&dev->i2c_adap, &tuner_msg, 1) != 1) + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + if (i2c_transfer(&dev->i2c_adap, &tuner_msg, 1) != 1) { + wprintk("could not write to tuner at addr: 0x%02x\n", + addr << 1); return -EIO; + } msleep(1); return 0; } -static int philips_tda6651_pll_init(u8 addr, struct dvb_frontend *fe) +static int philips_tu1216_init(struct dvb_frontend *fe) { struct saa7134_dev *dev = fe->dvb->priv; + struct tda1004x_state *state = fe->demodulator_priv; + u8 addr = state->config->tuner_address; static u8 tu1216_init[] = { 0x0b, 0xf5, 0x85, 0xab }; struct i2c_msg tuner_msg = {.addr = addr,.flags = 0,.buf = tu1216_init,.len = sizeof(tu1216_init) }; /* setup PLL configuration */ + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); if (i2c_transfer(&dev->i2c_adap, &tuner_msg, 1) != 1) return -EIO; msleep(1); @@ -286,49 +321,17 @@ static int philips_tda6651_pll_init(u8 addr, struct dvb_frontend *fe) /* ------------------------------------------------------------------ */ -static int philips_tu1216_pll_60_init(struct dvb_frontend *fe) -{ - return philips_tda6651_pll_init(0x60, fe); -} - -static int philips_tu1216_pll_60_set(struct dvb_frontend *fe, struct dvb_frontend_parameters *params) -{ - return philips_tda6651_pll_set(0x60, fe, params); -} - -static int philips_tu1216_request_firmware(struct dvb_frontend *fe, - const struct firmware **fw, char *name) -{ - struct saa7134_dev *dev = fe->dvb->priv; - return request_firmware(fw, name, &dev->pci->dev); -} - static struct tda1004x_config philips_tu1216_60_config = { - .demod_address = 0x8, .invert = 1, .invert_oclk = 0, .xtal_freq = TDA10046_XTAL_4M, .agc_config = TDA10046_AGC_DEFAULT, .if_freq = TDA10046_FREQ_3617, - .pll_init = philips_tu1216_pll_60_init, - .pll_set = philips_tu1216_pll_60_set, - .pll_sleep = NULL, - .request_firmware = philips_tu1216_request_firmware, + .tuner_address = 0x60, + .request_firmware = philips_tda1004x_request_firmware }; -/* ------------------------------------------------------------------ */ - -static int philips_tu1216_pll_61_init(struct dvb_frontend *fe) -{ - return philips_tda6651_pll_init(0x61, fe); -} - -static int philips_tu1216_pll_61_set(struct dvb_frontend *fe, struct dvb_frontend_parameters *params) -{ - return philips_tda6651_pll_set(0x61, fe, params); -} - static struct tda1004x_config philips_tu1216_61_config = { .demod_address = 0x8, @@ -337,186 +340,106 @@ static struct tda1004x_config philips_tu1216_61_config = { .xtal_freq = TDA10046_XTAL_4M, .agc_config = TDA10046_AGC_DEFAULT, .if_freq = TDA10046_FREQ_3617, - .pll_init = philips_tu1216_pll_61_init, - .pll_set = philips_tu1216_pll_61_set, - .pll_sleep = NULL, - .request_firmware = philips_tu1216_request_firmware, + .tuner_address = 0x61, + .request_firmware = philips_tda1004x_request_firmware }; /* ------------------------------------------------------------------ */ -static int philips_europa_pll_init(struct dvb_frontend *fe) +static int philips_td1316_tuner_init(struct dvb_frontend *fe) { struct saa7134_dev *dev = fe->dvb->priv; + struct tda1004x_state *state = fe->demodulator_priv; + u8 addr = state->config->tuner_address; static u8 msg[] = { 0x0b, 0xf5, 0x86, 0xab }; - struct i2c_msg init_msg = {.addr = 0x61,.flags = 0,.buf = msg,.len = sizeof(msg) }; + struct i2c_msg init_msg = {.addr = addr,.flags = 0,.buf = msg,.len = sizeof(msg) }; /* setup PLL configuration */ + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); if (i2c_transfer(&dev->i2c_adap, &init_msg, 1) != 1) return -EIO; - msleep(1); - - /* switch the board to dvb mode */ - init_msg.addr = 0x43; - init_msg.len = 0x02; - msg[0] = 0x00; - msg[1] = 0x40; - if (i2c_transfer(&dev->i2c_adap, &init_msg, 1) != 1) - return -EIO; - return 0; } -static int philips_td1316_pll_set(struct dvb_frontend *fe, struct dvb_frontend_parameters *params) +static int philips_td1316_tuner_set_params(struct dvb_frontend *fe, struct dvb_frontend_parameters *params) { - return philips_tda6651_pll_set(0x61, fe, params); + return philips_tda6651_pll_set(fe, params); } -static void philips_europa_analog(struct dvb_frontend *fe) +static int philips_td1316_tuner_sleep(struct dvb_frontend *fe) { struct saa7134_dev *dev = fe->dvb->priv; - /* this message actually turns the tuner back to analog mode */ + struct tda1004x_state *state = fe->demodulator_priv; + u8 addr = state->config->tuner_address; static u8 msg[] = { 0x0b, 0xdc, 0x86, 0xa4 }; - struct i2c_msg analog_msg = {.addr = 0x61,.flags = 0,.buf = msg,.len = sizeof(msg) }; + struct i2c_msg analog_msg = {.addr = addr,.flags = 0,.buf = msg,.len = sizeof(msg) }; - i2c_transfer(&dev->i2c_adap, &analog_msg, 1); - msleep(1); - - /* switch the board to analog mode */ - analog_msg.addr = 0x43; - analog_msg.len = 0x02; - msg[0] = 0x00; - msg[1] = 0x14; - i2c_transfer(&dev->i2c_adap, &analog_msg, 1); + /* switch the tuner to analog mode */ + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + if (i2c_transfer(&dev->i2c_adap, &analog_msg, 1) != 1) + return -EIO; + return 0; } -static struct tda1004x_config philips_europa_config = { - - .demod_address = 0x8, - .invert = 0, - .invert_oclk = 0, - .xtal_freq = TDA10046_XTAL_4M, - .agc_config = TDA10046_AGC_IFO_AUTO_POS, - .if_freq = TDA10046_FREQ_052, - .pll_init = philips_europa_pll_init, - .pll_set = philips_td1316_pll_set, - .pll_sleep = philips_europa_analog, - .request_firmware = NULL, -}; - /* ------------------------------------------------------------------ */ -static int philips_fmd1216_pll_init(struct dvb_frontend *fe) +static int philips_europa_tuner_init(struct dvb_frontend *fe) { struct saa7134_dev *dev = fe->dvb->priv; - /* this message is to set up ATC and ALC */ - static u8 fmd1216_init[] = { 0x0b, 0xdc, 0x9c, 0xa0 }; - struct i2c_msg tuner_msg = {.addr = 0x61,.flags = 0,.buf = fmd1216_init,.len = sizeof(fmd1216_init) }; + static u8 msg[] = { 0x00, 0x40}; + struct i2c_msg init_msg = {.addr = 0x43,.flags = 0,.buf = msg,.len = sizeof(msg) }; - if (i2c_transfer(&dev->i2c_adap, &tuner_msg, 1) != 1) + + if (philips_td1316_tuner_init(fe)) return -EIO; msleep(1); + if (i2c_transfer(&dev->i2c_adap, &init_msg, 1) != 1) + return -EIO; return 0; } -static void philips_fmd1216_analog(struct dvb_frontend *fe) +static int philips_europa_tuner_sleep(struct dvb_frontend *fe) { struct saa7134_dev *dev = fe->dvb->priv; - /* this message actually turns the tuner back to analog mode */ - static u8 fmd1216_init[] = { 0x0b, 0xdc, 0x9c, 0x60 }; - struct i2c_msg tuner_msg = {.addr = 0x61,.flags = 0,.buf = fmd1216_init,.len = sizeof(fmd1216_init) }; - i2c_transfer(&dev->i2c_adap, &tuner_msg, 1); - msleep(1); - fmd1216_init[2] = 0x86; - fmd1216_init[3] = 0x54; - i2c_transfer(&dev->i2c_adap, &tuner_msg, 1); - msleep(1); + static u8 msg[] = { 0x00, 0x14 }; + struct i2c_msg analog_msg = {.addr = 0x43,.flags = 0,.buf = msg,.len = sizeof(msg) }; + + if (philips_td1316_tuner_sleep(fe)) + return -EIO; + + /* switch the board to analog mode */ + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + i2c_transfer(&dev->i2c_adap, &analog_msg, 1); + return 0; } -static int philips_fmd1216_pll_set(struct dvb_frontend *fe, struct dvb_frontend_parameters *params) +static int philips_europa_demod_sleep(struct dvb_frontend *fe) { struct saa7134_dev *dev = fe->dvb->priv; - u8 tuner_buf[4]; - struct i2c_msg tuner_msg = {.addr = 0x61,.flags = 0,.buf = tuner_buf,.len = - sizeof(tuner_buf) }; - int tuner_frequency = 0; - int divider = 0; - u8 band, mode, cp; - - /* determine charge pump */ - tuner_frequency = params->frequency + 36130000; - if (tuner_frequency < 87000000) - return -EINVAL; - /* low band */ - else if (tuner_frequency < 180000000) { - band = 1; - mode = 7; - cp = 0; - } else if (tuner_frequency < 195000000) { - band = 1; - mode = 6; - cp = 1; - /* mid band */ - } else if (tuner_frequency < 366000000) { - if (params->u.ofdm.bandwidth == BANDWIDTH_8_MHZ) { - band = 10; - } else { - band = 2; - } - mode = 7; - cp = 0; - } else if (tuner_frequency < 478000000) { - if (params->u.ofdm.bandwidth == BANDWIDTH_8_MHZ) { - band = 10; - } else { - band = 2; - } - mode = 6; - cp = 1; - /* high band */ - } else if (tuner_frequency < 662000000) { - if (params->u.ofdm.bandwidth == BANDWIDTH_8_MHZ) { - band = 12; - } else { - band = 4; - } - mode = 7; - cp = 0; - } else if (tuner_frequency < 840000000) { - if (params->u.ofdm.bandwidth == BANDWIDTH_8_MHZ) { - band = 12; - } else { - band = 4; - } - mode = 6; - cp = 1; - } else { - if (params->u.ofdm.bandwidth == BANDWIDTH_8_MHZ) { - band = 12; - } else { - band = 4; - } - mode = 7; - cp = 1; - - } - /* calculate divisor */ - /* ((36166000 + Finput) / 166666) rounded! */ - divider = (tuner_frequency + 83333) / 166667; - - /* setup tuner buffer */ - tuner_buf[0] = (divider >> 8) & 0x7f; - tuner_buf[1] = divider & 0xff; - tuner_buf[2] = 0x80 | (cp << 6) | (mode << 3) | 4; - tuner_buf[3] = 0x40 | band; - if (i2c_transfer(&dev->i2c_adap, &tuner_msg, 1) != 1) - return -EIO; + if (dev->original_demod_sleep) + dev->original_demod_sleep(fe); + fe->ops.i2c_gate_ctrl(fe, 1); return 0; } +static struct tda1004x_config philips_europa_config = { + + .demod_address = 0x8, + .invert = 0, + .invert_oclk = 0, + .xtal_freq = TDA10046_XTAL_4M, + .agc_config = TDA10046_AGC_IFO_AUTO_POS, + .if_freq = TDA10046_FREQ_052, + .tuner_address = 0x61, + .request_firmware = philips_tda1004x_request_firmware +}; + static struct tda1004x_config medion_cardbus = { .demod_address = 0x08, .invert = 1, @@ -524,129 +447,120 @@ static struct tda1004x_config medion_cardbus = { .xtal_freq = TDA10046_XTAL_16M, .agc_config = TDA10046_AGC_IFO_AUTO_NEG, .if_freq = TDA10046_FREQ_3613, - .pll_init = philips_fmd1216_pll_init, - .pll_set = philips_fmd1216_pll_set, - .pll_sleep = philips_fmd1216_analog, - .request_firmware = NULL, + .tuner_address = 0x61, + .request_firmware = philips_tda1004x_request_firmware }; -/* ------------------------------------------------------------------ */ +/* ------------------------------------------------------------------ + * tda 1004x based cards with philips silicon tuner + */ -struct tda827x_data { - u32 lomax; - u8 spd; - u8 bs; - u8 bp; - u8 cp; - u8 gc3; - u8 div1p5; -}; +static int tda8290_i2c_gate_ctrl( struct dvb_frontend* fe, int enable) +{ + struct tda1004x_state *state = fe->demodulator_priv; -static struct tda827x_data tda827x_dvbt[] = { - { .lomax = 62000000, .spd = 3, .bs = 2, .bp = 0, .cp = 0, .gc3 = 3, .div1p5 = 1}, - { .lomax = 66000000, .spd = 3, .bs = 3, .bp = 0, .cp = 0, .gc3 = 3, .div1p5 = 1}, - { .lomax = 76000000, .spd = 3, .bs = 1, .bp = 0, .cp = 0, .gc3 = 3, .div1p5 = 0}, - { .lomax = 84000000, .spd = 3, .bs = 2, .bp = 0, .cp = 0, .gc3 = 3, .div1p5 = 0}, - { .lomax = 93000000, .spd = 3, .bs = 2, .bp = 0, .cp = 0, .gc3 = 1, .div1p5 = 0}, - { .lomax = 98000000, .spd = 3, .bs = 3, .bp = 0, .cp = 0, .gc3 = 1, .div1p5 = 0}, - { .lomax = 109000000, .spd = 3, .bs = 3, .bp = 1, .cp = 0, .gc3 = 1, .div1p5 = 0}, - { .lomax = 123000000, .spd = 2, .bs = 2, .bp = 1, .cp = 0, .gc3 = 1, .div1p5 = 1}, - { .lomax = 133000000, .spd = 2, .bs = 3, .bp = 1, .cp = 0, .gc3 = 1, .div1p5 = 1}, - { .lomax = 151000000, .spd = 2, .bs = 1, .bp = 1, .cp = 0, .gc3 = 1, .div1p5 = 0}, - { .lomax = 154000000, .spd = 2, .bs = 2, .bp = 1, .cp = 0, .gc3 = 1, .div1p5 = 0}, - { .lomax = 181000000, .spd = 2, .bs = 2, .bp = 1, .cp = 0, .gc3 = 0, .div1p5 = 0}, - { .lomax = 185000000, .spd = 2, .bs = 2, .bp = 2, .cp = 0, .gc3 = 1, .div1p5 = 0}, - { .lomax = 217000000, .spd = 2, .bs = 3, .bp = 2, .cp = 0, .gc3 = 1, .div1p5 = 0}, - { .lomax = 244000000, .spd = 1, .bs = 2, .bp = 2, .cp = 0, .gc3 = 1, .div1p5 = 1}, - { .lomax = 265000000, .spd = 1, .bs = 3, .bp = 2, .cp = 0, .gc3 = 1, .div1p5 = 1}, - { .lomax = 302000000, .spd = 1, .bs = 1, .bp = 2, .cp = 0, .gc3 = 1, .div1p5 = 0}, - { .lomax = 324000000, .spd = 1, .bs = 2, .bp = 2, .cp = 0, .gc3 = 1, .div1p5 = 0}, - { .lomax = 370000000, .spd = 1, .bs = 2, .bp = 3, .cp = 0, .gc3 = 1, .div1p5 = 0}, - { .lomax = 454000000, .spd = 1, .bs = 3, .bp = 3, .cp = 0, .gc3 = 1, .div1p5 = 0}, - { .lomax = 493000000, .spd = 0, .bs = 2, .bp = 3, .cp = 0, .gc3 = 1, .div1p5 = 1}, - { .lomax = 530000000, .spd = 0, .bs = 3, .bp = 3, .cp = 0, .gc3 = 1, .div1p5 = 1}, - { .lomax = 554000000, .spd = 0, .bs = 1, .bp = 3, .cp = 0, .gc3 = 1, .div1p5 = 0}, - { .lomax = 604000000, .spd = 0, .bs = 1, .bp = 4, .cp = 0, .gc3 = 0, .div1p5 = 0}, - { .lomax = 696000000, .spd = 0, .bs = 2, .bp = 4, .cp = 0, .gc3 = 0, .div1p5 = 0}, - { .lomax = 740000000, .spd = 0, .bs = 2, .bp = 4, .cp = 1, .gc3 = 0, .div1p5 = 0}, - { .lomax = 820000000, .spd = 0, .bs = 3, .bp = 4, .cp = 0, .gc3 = 0, .div1p5 = 0}, - { .lomax = 865000000, .spd = 0, .bs = 3, .bp = 4, .cp = 1, .gc3 = 0, .div1p5 = 0}, - { .lomax = 0, .spd = 0, .bs = 0, .bp = 0, .cp = 0, .gc3 = 0, .div1p5 = 0} -}; + u8 addr = state->config->i2c_gate; + static u8 tda8290_close[] = { 0x21, 0xc0}; + static u8 tda8290_open[] = { 0x21, 0x80}; + struct i2c_msg tda8290_msg = {.addr = addr,.flags = 0, .len = 2}; + if (enable) { + tda8290_msg.buf = tda8290_close; + } else { + tda8290_msg.buf = tda8290_open; + } + if (i2c_transfer(state->i2c, &tda8290_msg, 1) != 1) { + struct saa7134_dev *dev = fe->dvb->priv; + wprintk("could not access tda8290 I2C gate\n"); + return -EIO; + } + msleep(20); + return 0; +} -static int philips_tda827x_pll_init(struct dvb_frontend *fe) +static int philips_tda827x_tuner_init(struct dvb_frontend *fe) { + struct saa7134_dev *dev = fe->dvb->priv; + struct tda1004x_state *state = fe->demodulator_priv; + + switch (state->config->antenna_switch) { + case 0: break; + case 1: dprintk("setting GPIO21 to 0 (TV antenna?)\n"); + saa7134_set_gpio(dev, 21, 0); + break; + case 2: dprintk("setting GPIO21 to 1 (Radio antenna?)\n"); + saa7134_set_gpio(dev, 21, 1); + break; + } return 0; } -static int philips_tda827x_pll_set(struct dvb_frontend *fe, struct dvb_frontend_parameters *params) +static int philips_tda827x_tuner_sleep(struct dvb_frontend *fe) { struct saa7134_dev *dev = fe->dvb->priv; - u8 tuner_buf[14]; + struct tda1004x_state *state = fe->demodulator_priv; - struct i2c_msg tuner_msg = {.addr = 0x60,.flags = 0,.buf = tuner_buf, - .len = sizeof(tuner_buf) }; - int i, tuner_freq, if_freq; - u32 N; - switch (params->u.ofdm.bandwidth) { - case BANDWIDTH_6_MHZ: - if_freq = 4000000; + switch (state->config->antenna_switch) { + case 0: break; + case 1: dprintk("setting GPIO21 to 1 (Radio antenna?)\n"); + saa7134_set_gpio(dev, 21, 1); break; - case BANDWIDTH_7_MHZ: - if_freq = 4500000; - break; - default: /* 8 MHz or Auto */ - if_freq = 5000000; + case 2: dprintk("setting GPIO21 to 0 (TV antenna?)\n"); + saa7134_set_gpio(dev, 21, 0); break; } - tuner_freq = params->frequency + if_freq; + return 0; +} - i = 0; - while (tda827x_dvbt[i].lomax < tuner_freq) { - if(tda827x_dvbt[i + 1].lomax == 0) - break; - i++; +static void configure_tda827x_fe(struct saa7134_dev *dev, struct tda1004x_config *cdec_conf, + struct tda827x_config *tuner_conf) +{ + dev->dvb.frontend = dvb_attach(tda10046_attach, cdec_conf, &dev->i2c_adap); + if (dev->dvb.frontend) { + if (cdec_conf->i2c_gate) + dev->dvb.frontend->ops.i2c_gate_ctrl = tda8290_i2c_gate_ctrl; + if (dvb_attach(tda827x_attach, dev->dvb.frontend, cdec_conf->tuner_address, + &dev->i2c_adap, tuner_conf) == NULL) { + wprintk("no tda827x tuner found at addr: %02x\n", + cdec_conf->tuner_address); + } } +} - N = ((tuner_freq + 125000) / 250000) << (tda827x_dvbt[i].spd + 2); - tuner_buf[0] = 0; - tuner_buf[1] = (N>>8) | 0x40; - tuner_buf[2] = N & 0xff; - tuner_buf[3] = 0; - tuner_buf[4] = 0x52; - tuner_buf[5] = (tda827x_dvbt[i].spd << 6) + (tda827x_dvbt[i].div1p5 << 5) + - (tda827x_dvbt[i].bs << 3) + tda827x_dvbt[i].bp; - tuner_buf[6] = (tda827x_dvbt[i].gc3 << 4) + 0x8f; - tuner_buf[7] = 0xbf; - tuner_buf[8] = 0x2a; - tuner_buf[9] = 0x05; - tuner_buf[10] = 0xff; - tuner_buf[11] = 0x00; - tuner_buf[12] = 0x00; - tuner_buf[13] = 0x40; - - tuner_msg.len = 14; - if (i2c_transfer(&dev->i2c_adap, &tuner_msg, 1) != 1) - return -EIO; +/* ------------------------------------------------------------------ */ - msleep(500); - /* correct CP value */ - tuner_buf[0] = 0x30; - tuner_buf[1] = 0x50 + tda827x_dvbt[i].cp; - tuner_msg.len = 2; - i2c_transfer(&dev->i2c_adap, &tuner_msg, 1); +static struct tda827x_config tda827x_cfg_0 = { + .tuner_callback = saa7134_tuner_callback, + .init = philips_tda827x_tuner_init, + .sleep = philips_tda827x_tuner_sleep, + .config = 0, + .switch_addr = 0 +}; - return 0; -} +static struct tda827x_config tda827x_cfg_1 = { + .tuner_callback = saa7134_tuner_callback, + .init = philips_tda827x_tuner_init, + .sleep = philips_tda827x_tuner_sleep, + .config = 1, + .switch_addr = 0x4b +}; -static void philips_tda827x_pll_sleep(struct dvb_frontend *fe) -{ - struct saa7134_dev *dev = fe->dvb->priv; - static u8 tda827x_sleep[] = { 0x30, 0xd0}; - struct i2c_msg tuner_msg = {.addr = 0x60,.flags = 0,.buf = tda827x_sleep, - .len = sizeof(tda827x_sleep) }; - i2c_transfer(&dev->i2c_adap, &tuner_msg, 1); -} +static struct tda827x_config tda827x_cfg_2 = { + .tuner_callback = saa7134_tuner_callback, + .init = philips_tda827x_tuner_init, + .sleep = philips_tda827x_tuner_sleep, + .config = 2, + .switch_addr = 0x4b +}; + +static struct tda827x_config tda827x_cfg_2_sw42 = { + .tuner_callback = saa7134_tuner_callback, + .init = philips_tda827x_tuner_init, + .sleep = philips_tda827x_tuner_sleep, + .config = 2, + .switch_addr = 0x42 +}; + +/* ------------------------------------------------------------------ */ static struct tda1004x_config tda827x_lifeview_config = { .demod_address = 0x08, @@ -654,408 +568,705 @@ static struct tda1004x_config tda827x_lifeview_config = { .invert_oclk = 0, .xtal_freq = TDA10046_XTAL_16M, .agc_config = TDA10046_AGC_TDA827X, + .gpio_config = TDA10046_GP11_I, .if_freq = TDA10046_FREQ_045, - .pll_init = philips_tda827x_pll_init, - .pll_set = philips_tda827x_pll_set, - .pll_sleep = philips_tda827x_pll_sleep, - .request_firmware = NULL, + .tuner_address = 0x60, + .request_firmware = philips_tda1004x_request_firmware }; -/* ------------------------------------------------------------------ */ - -struct tda827xa_data { - u32 lomax; - u8 svco; - u8 spd; - u8 scr; - u8 sbs; - u8 gc3; +static struct tda1004x_config philips_tiger_config = { + .demod_address = 0x08, + .invert = 1, + .invert_oclk = 0, + .xtal_freq = TDA10046_XTAL_16M, + .agc_config = TDA10046_AGC_TDA827X, + .gpio_config = TDA10046_GP11_I, + .if_freq = TDA10046_FREQ_045, + .i2c_gate = 0x4b, + .tuner_address = 0x61, + .antenna_switch= 1, + .request_firmware = philips_tda1004x_request_firmware }; -static struct tda827xa_data tda827xa_dvbt[] = { - { .lomax = 56875000, .svco = 3, .spd = 4, .scr = 0, .sbs = 0, .gc3 = 1}, - { .lomax = 67250000, .svco = 0, .spd = 3, .scr = 0, .sbs = 0, .gc3 = 1}, - { .lomax = 81250000, .svco = 1, .spd = 3, .scr = 0, .sbs = 0, .gc3 = 1}, - { .lomax = 97500000, .svco = 2, .spd = 3, .scr = 0, .sbs = 0, .gc3 = 1}, - { .lomax = 113750000, .svco = 3, .spd = 3, .scr = 0, .sbs = 1, .gc3 = 1}, - { .lomax = 134500000, .svco = 0, .spd = 2, .scr = 0, .sbs = 1, .gc3 = 1}, - { .lomax = 154000000, .svco = 1, .spd = 2, .scr = 0, .sbs = 1, .gc3 = 1}, - { .lomax = 162500000, .svco = 1, .spd = 2, .scr = 0, .sbs = 1, .gc3 = 1}, - { .lomax = 183000000, .svco = 2, .spd = 2, .scr = 0, .sbs = 1, .gc3 = 1}, - { .lomax = 195000000, .svco = 2, .spd = 2, .scr = 0, .sbs = 2, .gc3 = 1}, - { .lomax = 227500000, .svco = 3, .spd = 2, .scr = 0, .sbs = 2, .gc3 = 1}, - { .lomax = 269000000, .svco = 0, .spd = 1, .scr = 0, .sbs = 2, .gc3 = 1}, - { .lomax = 290000000, .svco = 1, .spd = 1, .scr = 0, .sbs = 2, .gc3 = 1}, - { .lomax = 325000000, .svco = 1, .spd = 1, .scr = 0, .sbs = 3, .gc3 = 1}, - { .lomax = 390000000, .svco = 2, .spd = 1, .scr = 0, .sbs = 3, .gc3 = 1}, - { .lomax = 455000000, .svco = 3, .spd = 1, .scr = 0, .sbs = 3, .gc3 = 1}, - { .lomax = 520000000, .svco = 0, .spd = 0, .scr = 0, .sbs = 3, .gc3 = 1}, - { .lomax = 538000000, .svco = 0, .spd = 0, .scr = 1, .sbs = 3, .gc3 = 1}, - { .lomax = 550000000, .svco = 1, .spd = 0, .scr = 0, .sbs = 3, .gc3 = 1}, - { .lomax = 620000000, .svco = 1, .spd = 0, .scr = 0, .sbs = 4, .gc3 = 0}, - { .lomax = 650000000, .svco = 1, .spd = 0, .scr = 1, .sbs = 4, .gc3 = 0}, - { .lomax = 700000000, .svco = 2, .spd = 0, .scr = 0, .sbs = 4, .gc3 = 0}, - { .lomax = 780000000, .svco = 2, .spd = 0, .scr = 1, .sbs = 4, .gc3 = 0}, - { .lomax = 820000000, .svco = 3, .spd = 0, .scr = 0, .sbs = 4, .gc3 = 0}, - { .lomax = 870000000, .svco = 3, .spd = 0, .scr = 1, .sbs = 4, .gc3 = 0}, - { .lomax = 911000000, .svco = 3, .spd = 0, .scr = 2, .sbs = 4, .gc3 = 0}, - { .lomax = 0, .svco = 0, .spd = 0, .scr = 0, .sbs = 0, .gc3 = 0}}; - - -static int philips_tda827xa_pll_set(u8 addr, struct dvb_frontend *fe, struct dvb_frontend_parameters *params) -{ - struct saa7134_dev *dev = fe->dvb->priv; - u8 tuner_buf[14]; - unsigned char reg2[2]; - - struct i2c_msg msg = {.addr = addr,.flags = 0,.buf = tuner_buf}; - int i, tuner_freq, if_freq; - u32 N; - - switch (params->u.ofdm.bandwidth) { - case BANDWIDTH_6_MHZ: - if_freq = 4000000; - break; - case BANDWIDTH_7_MHZ: - if_freq = 4500000; - break; - default: /* 8 MHz or Auto */ - if_freq = 5000000; - break; - } - tuner_freq = params->frequency + if_freq; - - i = 0; - while (tda827xa_dvbt[i].lomax < tuner_freq) { - if(tda827xa_dvbt[i + 1].lomax == 0) - break; - i++; - } - - N = ((tuner_freq + 31250) / 62500) << tda827xa_dvbt[i].spd; - tuner_buf[0] = 0; // subaddress - tuner_buf[1] = N >> 8; - tuner_buf[2] = N & 0xff; - tuner_buf[3] = 0; - tuner_buf[4] = 0x16; - tuner_buf[5] = (tda827xa_dvbt[i].spd << 5) + (tda827xa_dvbt[i].svco << 3) + - tda827xa_dvbt[i].sbs; - tuner_buf[6] = 0x4b + (tda827xa_dvbt[i].gc3 << 4); - tuner_buf[7] = 0x0c; - tuner_buf[8] = 0x06; - tuner_buf[9] = 0x24; - tuner_buf[10] = 0xff; - tuner_buf[11] = 0x60; - tuner_buf[12] = 0x00; - tuner_buf[13] = 0x39; // lpsel - msg.len = 14; - if (i2c_transfer(&dev->i2c_adap, &msg, 1) != 1) - return -EIO; - - msg.buf= reg2; - msg.len = 2; - reg2[0] = 0x60; - reg2[1] = 0x3c; - i2c_transfer(&dev->i2c_adap, &msg, 1); - - reg2[0] = 0xa0; - reg2[1] = 0x40; - i2c_transfer(&dev->i2c_adap, &msg, 1); - - msleep(2); - /* correct CP value */ - reg2[0] = 0x30; - reg2[1] = 0x10 + tda827xa_dvbt[i].scr; - msg.len = 2; - i2c_transfer(&dev->i2c_adap, &msg, 1); - - msleep(550); - reg2[0] = 0x50; - reg2[1] = 0x4f + (tda827xa_dvbt[i].gc3 << 4); - i2c_transfer(&dev->i2c_adap, &msg, 1); - - return 0; +static struct tda1004x_config cinergy_ht_config = { + .demod_address = 0x08, + .invert = 1, + .invert_oclk = 0, + .xtal_freq = TDA10046_XTAL_16M, + .agc_config = TDA10046_AGC_TDA827X, + .gpio_config = TDA10046_GP01_I, + .if_freq = TDA10046_FREQ_045, + .i2c_gate = 0x4b, + .tuner_address = 0x61, + .request_firmware = philips_tda1004x_request_firmware +}; -} +static struct tda1004x_config cinergy_ht_pci_config = { + .demod_address = 0x08, + .invert = 1, + .invert_oclk = 0, + .xtal_freq = TDA10046_XTAL_16M, + .agc_config = TDA10046_AGC_TDA827X, + .gpio_config = TDA10046_GP01_I, + .if_freq = TDA10046_FREQ_045, + .i2c_gate = 0x4b, + .tuner_address = 0x60, + .request_firmware = philips_tda1004x_request_firmware +}; -static void philips_tda827xa_pll_sleep(u8 addr, struct dvb_frontend *fe) -{ - struct saa7134_dev *dev = fe->dvb->priv; - static u8 tda827xa_sleep[] = { 0x30, 0x90}; - struct i2c_msg tuner_msg = {.addr = addr,.flags = 0,.buf = tda827xa_sleep, - .len = sizeof(tda827xa_sleep) }; - i2c_transfer(&dev->i2c_adap, &tuner_msg, 1); +static struct tda1004x_config philips_tiger_s_config = { + .demod_address = 0x08, + .invert = 1, + .invert_oclk = 0, + .xtal_freq = TDA10046_XTAL_16M, + .agc_config = TDA10046_AGC_TDA827X, + .gpio_config = TDA10046_GP01_I, + .if_freq = TDA10046_FREQ_045, + .i2c_gate = 0x4b, + .tuner_address = 0x61, + .antenna_switch= 1, + .request_firmware = philips_tda1004x_request_firmware +}; -} +static struct tda1004x_config pinnacle_pctv_310i_config = { + .demod_address = 0x08, + .invert = 1, + .invert_oclk = 0, + .xtal_freq = TDA10046_XTAL_16M, + .agc_config = TDA10046_AGC_TDA827X, + .gpio_config = TDA10046_GP11_I, + .if_freq = TDA10046_FREQ_045, + .i2c_gate = 0x4b, + .tuner_address = 0x61, + .request_firmware = philips_tda1004x_request_firmware +}; -/* ------------------------------------------------------------------ */ +static struct tda1004x_config hauppauge_hvr_1110_config = { + .demod_address = 0x08, + .invert = 1, + .invert_oclk = 0, + .xtal_freq = TDA10046_XTAL_16M, + .agc_config = TDA10046_AGC_TDA827X, + .gpio_config = TDA10046_GP11_I, + .if_freq = TDA10046_FREQ_045, + .i2c_gate = 0x4b, + .tuner_address = 0x61, + .request_firmware = philips_tda1004x_request_firmware +}; -static int philips_tiger_pll_set(struct dvb_frontend *fe, struct dvb_frontend_parameters *params) -{ - int ret; - struct saa7134_dev *dev = fe->dvb->priv; - static u8 tda8290_close[] = { 0x21, 0xc0}; - static u8 tda8290_open[] = { 0x21, 0x80}; - struct i2c_msg tda8290_msg = {.addr = 0x4b,.flags = 0, .len = 2}; - /* close tda8290 i2c bridge */ - tda8290_msg.buf = tda8290_close; - ret = i2c_transfer(&dev->i2c_adap, &tda8290_msg, 1); - if (ret != 1) - return -EIO; - msleep(20); - ret = philips_tda827xa_pll_set(0x61, fe, params); - if (ret != 0) - return ret; - /* open tda8290 i2c bridge */ - tda8290_msg.buf = tda8290_open; - i2c_transfer(&dev->i2c_adap, &tda8290_msg, 1); - return ret; +static struct tda1004x_config asus_p7131_dual_config = { + .demod_address = 0x08, + .invert = 1, + .invert_oclk = 0, + .xtal_freq = TDA10046_XTAL_16M, + .agc_config = TDA10046_AGC_TDA827X, + .gpio_config = TDA10046_GP11_I, + .if_freq = TDA10046_FREQ_045, + .i2c_gate = 0x4b, + .tuner_address = 0x61, + .antenna_switch= 2, + .request_firmware = philips_tda1004x_request_firmware }; -static int philips_tiger_dvb_mode(struct dvb_frontend *fe) -{ - struct saa7134_dev *dev = fe->dvb->priv; - static u8 data[] = { 0x3c, 0x33, 0x6a}; - struct i2c_msg msg = {.addr=0x08, .flags=0, .buf=data, .len = sizeof(data)}; +static struct tda1004x_config lifeview_trio_config = { + .demod_address = 0x09, + .invert = 1, + .invert_oclk = 0, + .xtal_freq = TDA10046_XTAL_16M, + .agc_config = TDA10046_AGC_TDA827X, + .gpio_config = TDA10046_GP00_I, + .if_freq = TDA10046_FREQ_045, + .tuner_address = 0x60, + .request_firmware = philips_tda1004x_request_firmware +}; - if (i2c_transfer(&dev->i2c_adap, &msg, 1) != 1) - return -EIO; - return 0; -} +static struct tda1004x_config tevion_dvbt220rf_config = { + .demod_address = 0x08, + .invert = 1, + .invert_oclk = 0, + .xtal_freq = TDA10046_XTAL_16M, + .agc_config = TDA10046_AGC_TDA827X, + .gpio_config = TDA10046_GP11_I, + .if_freq = TDA10046_FREQ_045, + .tuner_address = 0x60, + .request_firmware = philips_tda1004x_request_firmware +}; -static void philips_tiger_analog_mode(struct dvb_frontend *fe) -{ - struct saa7134_dev *dev = fe->dvb->priv; - static u8 data[] = { 0x3c, 0x33, 0x68}; - struct i2c_msg msg = {.addr=0x08, .flags=0, .buf=data, .len = sizeof(data)}; +static struct tda1004x_config md8800_dvbt_config = { + .demod_address = 0x08, + .invert = 1, + .invert_oclk = 0, + .xtal_freq = TDA10046_XTAL_16M, + .agc_config = TDA10046_AGC_TDA827X, + .gpio_config = TDA10046_GP01_I, + .if_freq = TDA10046_FREQ_045, + .i2c_gate = 0x4b, + .tuner_address = 0x60, + .request_firmware = philips_tda1004x_request_firmware +}; - i2c_transfer(&dev->i2c_adap, &msg, 1); - philips_tda827xa_pll_sleep( 0x61, fe); -} +static struct tda1004x_config asus_p7131_4871_config = { + .demod_address = 0x08, + .invert = 1, + .invert_oclk = 0, + .xtal_freq = TDA10046_XTAL_16M, + .agc_config = TDA10046_AGC_TDA827X, + .gpio_config = TDA10046_GP01_I, + .if_freq = TDA10046_FREQ_045, + .i2c_gate = 0x4b, + .tuner_address = 0x61, + .antenna_switch= 2, + .request_firmware = philips_tda1004x_request_firmware +}; -static struct tda1004x_config philips_tiger_config = { +static struct tda1004x_config asus_p7131_hybrid_lna_config = { .demod_address = 0x08, .invert = 1, .invert_oclk = 0, .xtal_freq = TDA10046_XTAL_16M, .agc_config = TDA10046_AGC_TDA827X, + .gpio_config = TDA10046_GP11_I, .if_freq = TDA10046_FREQ_045, - .pll_init = philips_tiger_dvb_mode, - .pll_set = philips_tiger_pll_set, - .pll_sleep = philips_tiger_analog_mode, - .request_firmware = NULL, + .i2c_gate = 0x4b, + .tuner_address = 0x61, + .antenna_switch= 2, + .request_firmware = philips_tda1004x_request_firmware }; -/* ------------------------------------------------------------------ */ +static struct tda1004x_config kworld_dvb_t_210_config = { + .demod_address = 0x08, + .invert = 1, + .invert_oclk = 0, + .xtal_freq = TDA10046_XTAL_16M, + .agc_config = TDA10046_AGC_TDA827X, + .gpio_config = TDA10046_GP11_I, + .if_freq = TDA10046_FREQ_045, + .i2c_gate = 0x4b, + .tuner_address = 0x61, + .antenna_switch= 1, + .request_firmware = philips_tda1004x_request_firmware +}; -static int ads_duo_pll_set(struct dvb_frontend *fe, struct dvb_frontend_parameters *params) -{ - int ret; +static struct tda1004x_config avermedia_super_007_config = { + .demod_address = 0x08, + .invert = 1, + .invert_oclk = 0, + .xtal_freq = TDA10046_XTAL_16M, + .agc_config = TDA10046_AGC_TDA827X, + .gpio_config = TDA10046_GP01_I, + .if_freq = TDA10046_FREQ_045, + .i2c_gate = 0x4b, + .tuner_address = 0x60, + .antenna_switch= 1, + .request_firmware = philips_tda1004x_request_firmware +}; - ret = philips_tda827xa_pll_set(0x61, fe, params); - return ret; +static struct tda1004x_config twinhan_dtv_dvb_3056_config = { + .demod_address = 0x08, + .invert = 1, + .invert_oclk = 0, + .xtal_freq = TDA10046_XTAL_16M, + .agc_config = TDA10046_AGC_TDA827X, + .gpio_config = TDA10046_GP01_I, + .if_freq = TDA10046_FREQ_045, + .i2c_gate = 0x42, + .tuner_address = 0x61, + .antenna_switch = 1, + .request_firmware = philips_tda1004x_request_firmware }; -static int ads_duo_dvb_mode(struct dvb_frontend *fe) +/* ------------------------------------------------------------------ + * special case: this card uses saa713x GPIO22 for the mode switch + */ + +static int ads_duo_tuner_init(struct dvb_frontend *fe) { struct saa7134_dev *dev = fe->dvb->priv; + philips_tda827x_tuner_init(fe); /* route TDA8275a AGC input to the channel decoder */ - saa_writeb(SAA7134_GPIO_GPSTATUS2, 0x60); + saa7134_set_gpio(dev, 22, 1); return 0; } -static void ads_duo_analog_mode(struct dvb_frontend *fe) +static int ads_duo_tuner_sleep(struct dvb_frontend *fe) { struct saa7134_dev *dev = fe->dvb->priv; /* route TDA8275a AGC input to the analog IF chip*/ - saa_writeb(SAA7134_GPIO_GPSTATUS2, 0x20); - philips_tda827xa_pll_sleep( 0x61, fe); + saa7134_set_gpio(dev, 22, 0); + philips_tda827x_tuner_sleep(fe); + return 0; } +static struct tda827x_config ads_duo_cfg = { + .tuner_callback = saa7134_tuner_callback, + .init = ads_duo_tuner_init, + .sleep = ads_duo_tuner_sleep, + .config = 0 +}; + static struct tda1004x_config ads_tech_duo_config = { .demod_address = 0x08, .invert = 1, .invert_oclk = 0, .xtal_freq = TDA10046_XTAL_16M, - .agc_config = TDA10046_AGC_TDA827X_GPL, + .agc_config = TDA10046_AGC_TDA827X, + .gpio_config = TDA10046_GP00_I, .if_freq = TDA10046_FREQ_045, - .pll_init = ads_duo_dvb_mode, - .pll_set = ads_duo_pll_set, - .pll_sleep = ads_duo_analog_mode, - .request_firmware = NULL, + .tuner_address = 0x61, + .request_firmware = philips_tda1004x_request_firmware }; -/* ------------------------------------------------------------------ */ +/* ================================================================== + * tda10086 based DVB-S cards, helper functions + */ + +static struct tda10086_config flydvbs = { + .demod_address = 0x0e, + .invert = 0, + .diseqc_tone = 0, +}; -static int tevion_dvb220rf_pll_set(struct dvb_frontend *fe, struct dvb_frontend_parameters *params) +/* ------------------------------------------------------------------ + * special case: lnb supply is connected to the gated i2c + */ + +static int md8800_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage) { - int ret; - ret = philips_tda827xa_pll_set(0x60, fe, params); - return ret; -} + int res = -EIO; + struct saa7134_dev *dev = fe->dvb->priv; + if (fe->ops.i2c_gate_ctrl) { + fe->ops.i2c_gate_ctrl(fe, 1); + if (dev->original_set_voltage) + res = dev->original_set_voltage(fe, voltage); + fe->ops.i2c_gate_ctrl(fe, 0); + } + return res; +}; -static int tevion_dvb220rf_pll_init(struct dvb_frontend *fe) +static int md8800_set_high_voltage(struct dvb_frontend *fe, long arg) { + int res = -EIO; + struct saa7134_dev *dev = fe->dvb->priv; + if (fe->ops.i2c_gate_ctrl) { + fe->ops.i2c_gate_ctrl(fe, 1); + if (dev->original_set_high_voltage) + res = dev->original_set_high_voltage(fe, arg); + fe->ops.i2c_gate_ctrl(fe, 0); + } + return res; +}; + +static int md8800_set_voltage2(struct dvb_frontend *fe, fe_sec_voltage_t voltage) +{ + struct saa7134_dev *dev = fe->dvb->priv; + u8 wbuf[2] = { 0x1f, 00 }; + u8 rbuf; + struct i2c_msg msg[] = { { .addr = 0x08, .flags = 0, .buf = wbuf, .len = 1 }, + { .addr = 0x08, .flags = I2C_M_RD, .buf = &rbuf, .len = 1 } }; + + if (i2c_transfer(&dev->i2c_adap, msg, 2) != 2) + return -EIO; + /* NOTE: this assumes that gpo1 is used, it might be bit 5 (gpo2) */ + if (voltage == SEC_VOLTAGE_18) + wbuf[1] = rbuf | 0x10; + else + wbuf[1] = rbuf & 0xef; + msg[0].len = 2; + i2c_transfer(&dev->i2c_adap, msg, 1); return 0; } -static void tevion_dvb220rf_pll_sleep(struct dvb_frontend *fe) +static int md8800_set_high_voltage2(struct dvb_frontend *fe, long arg) { - philips_tda827xa_pll_sleep( 0x61, fe); + struct saa7134_dev *dev = fe->dvb->priv; + wprintk("%s: sorry can't set high LNB supply voltage from here\n", __func__); + return -EIO; } -static struct tda1004x_config tevion_dvbt220rf_config = { - .demod_address = 0x08, - .invert = 1, - .invert_oclk = 0, - .xtal_freq = TDA10046_XTAL_16M, - .agc_config = TDA10046_AGC_TDA827X, - .if_freq = TDA10046_FREQ_045, - .pll_init = tevion_dvb220rf_pll_init, - .pll_set = tevion_dvb220rf_pll_set, - .pll_sleep = tevion_dvb220rf_pll_sleep, - .request_firmware = NULL, -}; - -#endif - -/* ------------------------------------------------------------------ */ +/* ================================================================== + * nxt200x based ATSC cards, helper functions + */ -#ifdef HAVE_NXT200X static struct nxt200x_config avertvhda180 = { .demod_address = 0x0a, - .pll_address = 0x61, - .pll_desc = &dvb_pll_tdhu2, }; -static int nxt200x_set_pll_input(u8 *buf, int input) -{ - if (input) - buf[3] |= 0x08; - else - buf[3] &= ~0x08; - return 0; -} - static struct nxt200x_config kworldatsc110 = { .demod_address = 0x0a, - .pll_address = 0x61, - .pll_desc = &dvb_pll_tuv1236d, - .set_pll_input = nxt200x_set_pll_input, }; -#endif -/* ------------------------------------------------------------------ */ +/* ================================================================== + * Core code + */ static int dvb_init(struct saa7134_dev *dev) { + int ret; + int attach_xc3028 = 0; + /* init struct videobuf_dvb */ dev->ts.nr_bufs = 32; dev->ts.nr_packets = 32*4; dev->dvb.name = dev->name; - videobuf_queue_init(&dev->dvb.dvbq, &saa7134_ts_qops, - dev->pci, &dev->slock, + videobuf_queue_sg_init(&dev->dvb.dvbq, &saa7134_ts_qops, + &dev->pci->dev, &dev->slock, V4L2_BUF_TYPE_VIDEO_CAPTURE, V4L2_FIELD_ALTERNATE, sizeof(struct saa7134_buf), dev); switch (dev->board) { -#ifdef HAVE_MT352 case SAA7134_BOARD_PINNACLE_300I_DVBT_PAL: - printk("%s: pinnacle 300i dvb setup\n",dev->name); - dev->dvb.frontend = mt352_attach(&pinnacle_300i, - &dev->i2c_adap); + dprintk("pinnacle 300i dvb setup\n"); + dev->dvb.frontend = dvb_attach(mt352_attach, &pinnacle_300i, + &dev->i2c_adap); + if (dev->dvb.frontend) { + dev->dvb.frontend->ops.tuner_ops.set_params = mt352_pinnacle_tuner_set_params; + } break; - case SAA7134_BOARD_AVERMEDIA_777: - printk("%s: avertv 777 dvb setup\n",dev->name); - dev->dvb.frontend = mt352_attach(&avermedia_777, - &dev->i2c_adap); + case SAA7134_BOARD_AVERMEDIA_A16AR: + dprintk("avertv 777 dvb setup\n"); + dev->dvb.frontend = dvb_attach(mt352_attach, &avermedia_777, + &dev->i2c_adap); + if (dev->dvb.frontend) { + dvb_attach(simple_tuner_attach, dev->dvb.frontend, + &dev->i2c_adap, 0x61, + TUNER_PHILIPS_TD1316); + } break; -#endif -#ifdef HAVE_TDA1004X case SAA7134_BOARD_MD7134: - dev->dvb.frontend = tda10046_attach(&medion_cardbus, - &dev->i2c_adap); + dev->dvb.frontend = dvb_attach(tda10046_attach, + &medion_cardbus, + &dev->i2c_adap); + if (dev->dvb.frontend) { + dvb_attach(simple_tuner_attach, dev->dvb.frontend, + &dev->i2c_adap, medion_cardbus.tuner_address, + TUNER_PHILIPS_FMD1216ME_MK3); + } break; case SAA7134_BOARD_PHILIPS_TOUGH: - dev->dvb.frontend = tda10046_attach(&philips_tu1216_60_config, - &dev->i2c_adap); + dev->dvb.frontend = dvb_attach(tda10046_attach, + &philips_tu1216_60_config, + &dev->i2c_adap); + if (dev->dvb.frontend) { + dev->dvb.frontend->ops.tuner_ops.init = philips_tu1216_init; + dev->dvb.frontend->ops.tuner_ops.set_params = philips_tda6651_pll_set; + } break; case SAA7134_BOARD_FLYDVBTDUO: - dev->dvb.frontend = tda10046_attach(&tda827x_lifeview_config, - &dev->i2c_adap); - break; case SAA7134_BOARD_FLYDVBT_DUO_CARDBUS: - dev->dvb.frontend = tda10046_attach(&tda827x_lifeview_config, - &dev->i2c_adap); + configure_tda827x_fe(dev, &tda827x_lifeview_config, &tda827x_cfg_0); break; case SAA7134_BOARD_PHILIPS_EUROPA: - dev->dvb.frontend = tda10046_attach(&philips_europa_config, - &dev->i2c_adap); - break; case SAA7134_BOARD_VIDEOMATE_DVBT_300: - dev->dvb.frontend = tda10046_attach(&philips_europa_config, - &dev->i2c_adap); + dev->dvb.frontend = dvb_attach(tda10046_attach, + &philips_europa_config, + &dev->i2c_adap); + if (dev->dvb.frontend) { + dev->original_demod_sleep = dev->dvb.frontend->ops.sleep; + dev->dvb.frontend->ops.sleep = philips_europa_demod_sleep; + dev->dvb.frontend->ops.tuner_ops.init = philips_europa_tuner_init; + dev->dvb.frontend->ops.tuner_ops.sleep = philips_europa_tuner_sleep; + dev->dvb.frontend->ops.tuner_ops.set_params = philips_td1316_tuner_set_params; + } break; case SAA7134_BOARD_VIDEOMATE_DVBT_200: - dev->dvb.frontend = tda10046_attach(&philips_tu1216_61_config, - &dev->i2c_adap); + dev->dvb.frontend = dvb_attach(tda10046_attach, + &philips_tu1216_61_config, + &dev->i2c_adap); + if (dev->dvb.frontend) { + dev->dvb.frontend->ops.tuner_ops.init = philips_tu1216_init; + dev->dvb.frontend->ops.tuner_ops.set_params = philips_tda6651_pll_set; + } + break; + case SAA7134_BOARD_KWORLD_DVBT_210: + configure_tda827x_fe(dev, &kworld_dvb_t_210_config, &tda827x_cfg_2); break; case SAA7134_BOARD_PHILIPS_TIGER: - dev->dvb.frontend = tda10046_attach(&philips_tiger_config, - &dev->i2c_adap); + configure_tda827x_fe(dev, &philips_tiger_config, &tda827x_cfg_0); + break; + case SAA7134_BOARD_PINNACLE_PCTV_310i: + configure_tda827x_fe(dev, &pinnacle_pctv_310i_config, &tda827x_cfg_1); + break; + case SAA7134_BOARD_HAUPPAUGE_HVR1110: + configure_tda827x_fe(dev, &hauppauge_hvr_1110_config, &tda827x_cfg_1); break; case SAA7134_BOARD_ASUSTeK_P7131_DUAL: - dev->dvb.frontend = tda10046_attach(&philips_tiger_config, - &dev->i2c_adap); + configure_tda827x_fe(dev, &asus_p7131_dual_config, &tda827x_cfg_0); break; case SAA7134_BOARD_FLYDVBT_LR301: - dev->dvb.frontend = tda10046_attach(&tda827x_lifeview_config, - &dev->i2c_adap); + configure_tda827x_fe(dev, &tda827x_lifeview_config, &tda827x_cfg_0); + break; + case SAA7134_BOARD_FLYDVB_TRIO: + if(! use_frontend) { /* terrestrial */ + configure_tda827x_fe(dev, &lifeview_trio_config, &tda827x_cfg_0); + } else { /* satellite */ + dev->dvb.frontend = dvb_attach(tda10086_attach, &flydvbs, &dev->i2c_adap); + if (dev->dvb.frontend) { + if (dvb_attach(tda826x_attach, dev->dvb.frontend, 0x63, + &dev->i2c_adap, 0) == NULL) { + wprintk("%s: Lifeview Trio, No tda826x found!\n", __func__); + } + if (dvb_attach(isl6421_attach, dev->dvb.frontend, &dev->i2c_adap, + 0x08, 0, 0) == NULL) { + wprintk("%s: Lifeview Trio, No ISL6421 found!\n", __func__); + } + } + } break; case SAA7134_BOARD_ADS_DUO_CARDBUS_PTV331: - dev->dvb.frontend = tda10046_attach(&ads_tech_duo_config, - &dev->i2c_adap); + case SAA7134_BOARD_FLYDVBT_HYBRID_CARDBUS: + dev->dvb.frontend = dvb_attach(tda10046_attach, + &ads_tech_duo_config, + &dev->i2c_adap); + if (dev->dvb.frontend) { + if (dvb_attach(tda827x_attach,dev->dvb.frontend, + ads_tech_duo_config.tuner_address, &dev->i2c_adap, + &ads_duo_cfg) == NULL) { + wprintk("no tda827x tuner found at addr: %02x\n", + ads_tech_duo_config.tuner_address); + } + } break; case SAA7134_BOARD_TEVION_DVBT_220RF: - dev->dvb.frontend = tda10046_attach(&tevion_dvbt220rf_config, - &dev->i2c_adap); + configure_tda827x_fe(dev, &tevion_dvbt220rf_config, &tda827x_cfg_0); + break; + case SAA7134_BOARD_MEDION_MD8800_QUADRO: + if (!use_frontend) { /* terrestrial */ + configure_tda827x_fe(dev, &md8800_dvbt_config, &tda827x_cfg_0); + } else { /* satellite */ + dev->dvb.frontend = dvb_attach(tda10086_attach, + &flydvbs, &dev->i2c_adap); + if (dev->dvb.frontend) { + struct dvb_frontend *fe = dev->dvb.frontend; + u8 dev_id = dev->eedata[2]; + u8 data = 0xc4; + struct i2c_msg msg = {.addr = 0x08, .flags = 0, .len = 1}; + + if (dvb_attach(tda826x_attach, dev->dvb.frontend, + 0x60, &dev->i2c_adap, 0) == NULL) + wprintk("%s: Medion Quadro, no tda826x " + "found !\n", __func__); + if (dev_id != 0x08) { + /* we need to open the i2c gate (we know it exists) */ + fe->ops.i2c_gate_ctrl(fe, 1); + if (dvb_attach(isl6405_attach, fe, + &dev->i2c_adap, 0x08, 0, 0) == NULL) + wprintk("%s: Medion Quadro, no ISL6405 " + "found !\n", __func__); + if (dev_id == 0x07) { + /* fire up the 2nd section of the LNB supply since + we can't do this from the other section */ + msg.buf = &data; + i2c_transfer(&dev->i2c_adap, &msg, 1); + } + fe->ops.i2c_gate_ctrl(fe, 0); + dev->original_set_voltage = fe->ops.set_voltage; + fe->ops.set_voltage = md8800_set_voltage; + dev->original_set_high_voltage = fe->ops.enable_high_lnb_voltage; + fe->ops.enable_high_lnb_voltage = md8800_set_high_voltage; + } else { + fe->ops.set_voltage = md8800_set_voltage2; + fe->ops.enable_high_lnb_voltage = md8800_set_high_voltage2; + } + } + } break; -#endif -#ifdef HAVE_NXT200X case SAA7134_BOARD_AVERMEDIA_AVERTVHD_A180: - dev->dvb.frontend = nxt200x_attach(&avertvhda180, &dev->i2c_adap); + dev->dvb.frontend = dvb_attach(nxt200x_attach, &avertvhda180, + &dev->i2c_adap); + if (dev->dvb.frontend) { + dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x61, + NULL, DVB_PLL_TDHU2); + } break; case SAA7134_BOARD_KWORLD_ATSC110: - dev->dvb.frontend = nxt200x_attach(&kworldatsc110, &dev->i2c_adap); + dev->dvb.frontend = dvb_attach(nxt200x_attach, &kworldatsc110, + &dev->i2c_adap); + if (dev->dvb.frontend) { + dvb_attach(simple_tuner_attach, dev->dvb.frontend, + &dev->i2c_adap, 0x61, + TUNER_PHILIPS_TUV1236D); + } + break; + case SAA7134_BOARD_FLYDVBS_LR300: + dev->dvb.frontend = dvb_attach(tda10086_attach, &flydvbs, + &dev->i2c_adap); + if (dev->dvb.frontend) { + if (dvb_attach(tda826x_attach, dev->dvb.frontend, 0x60, + &dev->i2c_adap, 0) == NULL) { + wprintk("%s: No tda826x found!\n", __func__); + } + if (dvb_attach(isl6421_attach, dev->dvb.frontend, + &dev->i2c_adap, 0x08, 0, 0) == NULL) { + wprintk("%s: No ISL6421 found!\n", __func__); + } + } + break; + case SAA7134_BOARD_ASUS_EUROPA2_HYBRID: + dev->dvb.frontend = dvb_attach(tda10046_attach, + &medion_cardbus, + &dev->i2c_adap); + if (dev->dvb.frontend) { + dev->original_demod_sleep = dev->dvb.frontend->ops.sleep; + dev->dvb.frontend->ops.sleep = philips_europa_demod_sleep; + + dvb_attach(simple_tuner_attach, dev->dvb.frontend, + &dev->i2c_adap, medion_cardbus.tuner_address, + TUNER_PHILIPS_FMD1216ME_MK3); + } + break; + case SAA7134_BOARD_VIDEOMATE_DVBT_200A: + dev->dvb.frontend = dvb_attach(tda10046_attach, + &philips_europa_config, + &dev->i2c_adap); + if (dev->dvb.frontend) { + dev->dvb.frontend->ops.tuner_ops.init = philips_td1316_tuner_init; + dev->dvb.frontend->ops.tuner_ops.set_params = philips_td1316_tuner_set_params; + } + break; + case SAA7134_BOARD_CINERGY_HT_PCMCIA: + configure_tda827x_fe(dev, &cinergy_ht_config, &tda827x_cfg_0); + break; + case SAA7134_BOARD_CINERGY_HT_PCI: + configure_tda827x_fe(dev, &cinergy_ht_pci_config, &tda827x_cfg_0); + break; + case SAA7134_BOARD_PHILIPS_TIGER_S: + configure_tda827x_fe(dev, &philips_tiger_s_config, &tda827x_cfg_2); + break; + case SAA7134_BOARD_ASUS_P7131_4871: + configure_tda827x_fe(dev, &asus_p7131_4871_config, &tda827x_cfg_2); + break; + case SAA7134_BOARD_ASUSTeK_P7131_HYBRID_LNA: + configure_tda827x_fe(dev, &asus_p7131_hybrid_lna_config, &tda827x_cfg_2); + break; + case SAA7134_BOARD_AVERMEDIA_SUPER_007: + configure_tda827x_fe(dev, &avermedia_super_007_config, &tda827x_cfg_0); + break; + case SAA7134_BOARD_TWINHAN_DTV_DVB_3056: + configure_tda827x_fe(dev, &twinhan_dtv_dvb_3056_config, &tda827x_cfg_2_sw42); + break; + case SAA7134_BOARD_PHILIPS_SNAKE: + dev->dvb.frontend = dvb_attach(tda10086_attach, &flydvbs, + &dev->i2c_adap); + if (dev->dvb.frontend) { + if (dvb_attach(tda826x_attach, dev->dvb.frontend, 0x60, + &dev->i2c_adap, 0) == NULL) + wprintk("%s: No tda826x found!\n", __func__); + if (dvb_attach(lnbp21_attach, dev->dvb.frontend, + &dev->i2c_adap, 0, 0) == NULL) + wprintk("%s: No lnbp21 found!\n", __func__); + } + break; + case SAA7134_BOARD_CREATIX_CTX953: + configure_tda827x_fe(dev, &md8800_dvbt_config, &tda827x_cfg_0); + break; + case SAA7134_BOARD_MSI_TVANYWHERE_AD11: + configure_tda827x_fe(dev, &philips_tiger_s_config, &tda827x_cfg_2); + break; + case SAA7134_BOARD_AVERMEDIA_CARDBUS_506: + dev->dvb.frontend = dvb_attach(mt352_attach, + &avermedia_e506r_mt352_dev, + &dev->i2c_adap); + attach_xc3028 = 1; + break; + case SAA7134_BOARD_MD7134_BRIDGE_2: + dev->dvb.frontend = dvb_attach(tda10086_attach, + &flydvbs, &dev->i2c_adap); + if (dev->dvb.frontend) { + struct dvb_frontend *fe; + if (dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x60, + &dev->i2c_adap, DVB_PLL_PHILIPS_SD1878_TDA8261) == NULL) + wprintk("%s: MD7134 DVB-S, no SD1878 " + "found !\n", __func__); + /* we need to open the i2c gate (we know it exists) */ + fe = dev->dvb.frontend; + fe->ops.i2c_gate_ctrl(fe, 1); + if (dvb_attach(isl6405_attach, fe, + &dev->i2c_adap, 0x08, 0, 0) == NULL) + wprintk("%s: MD7134 DVB-S, no ISL6405 " + "found !\n", __func__); + fe->ops.i2c_gate_ctrl(fe, 0); + dev->original_set_voltage = fe->ops.set_voltage; + fe->ops.set_voltage = md8800_set_voltage; + dev->original_set_high_voltage = fe->ops.enable_high_lnb_voltage; + fe->ops.enable_high_lnb_voltage = md8800_set_high_voltage; + } break; -#endif default: - printk("%s: Huh? unknown DVB card?\n",dev->name); + wprintk("Huh? unknown DVB card?\n"); break; } + if (attach_xc3028) { + struct dvb_frontend *fe; + struct xc2028_config cfg = { + .i2c_adap = &dev->i2c_adap, + .i2c_addr = 0x61, + }; + fe = dvb_attach(xc2028_attach, dev->dvb.frontend, &cfg); + if (!fe) { + printk(KERN_ERR "%s/2: xc3028 attach failed\n", + dev->name); + dvb_frontend_detach(dev->dvb.frontend); + dvb_unregister_frontend(dev->dvb.frontend); + dev->dvb.frontend = NULL; + return -1; + } + } + if (NULL == dev->dvb.frontend) { - printk("%s: frontend initialization failed\n",dev->name); + printk(KERN_ERR "%s/dvb: frontend initialization failed\n", dev->name); return -1; } /* register everything else */ - return videobuf_dvb_register(&dev->dvb, THIS_MODULE, dev); + ret = videobuf_dvb_register(&dev->dvb, THIS_MODULE, dev, &dev->pci->dev); + + /* this sequence is necessary to make the tda1004x load its firmware + * and to enter analog mode of hybrid boards + */ + if (!ret) { + if (dev->dvb.frontend->ops.init) + dev->dvb.frontend->ops.init(dev->dvb.frontend); + if (dev->dvb.frontend->ops.sleep) + dev->dvb.frontend->ops.sleep(dev->dvb.frontend); + if (dev->dvb.frontend->ops.tuner_ops.sleep) + dev->dvb.frontend->ops.tuner_ops.sleep(dev->dvb.frontend); + } + return ret; } static int dvb_fini(struct saa7134_dev *dev) { - static int on = TDA9887_PRESENT | TDA9887_PORT2_INACTIVE; + /* FIXME: I suspect that this code is bogus, since the entry for + Pinnacle 300I DVB-T PAL already defines the proper init to allow + the detection of mt2032 (TDA9887_PORT2_INACTIVE) + */ + if (dev->board == SAA7134_BOARD_PINNACLE_300I_DVBT_PAL) { + struct v4l2_priv_tun_config tda9887_cfg; + static int on = TDA9887_PRESENT | TDA9887_PORT2_INACTIVE; + + tda9887_cfg.tuner = TUNER_TDA9887; + tda9887_cfg.priv = &on; - switch (dev->board) { - case SAA7134_BOARD_PINNACLE_300I_DVBT_PAL: /* otherwise we don't detect the tuner on next insmod */ - saa7134_i2c_call_clients(dev,TDA9887_SET_CONFIG,&on); - break; - }; + saa7134_i2c_call_clients(dev, TUNER_SET_CONFIG, &tda9887_cfg); + } else if (dev->board == SAA7134_BOARD_MEDION_MD8800_QUADRO) { + if ((dev->eedata[2] == 0x07) && use_frontend) { + /* turn off the 2nd lnb supply */ + u8 data = 0x80; + struct i2c_msg msg = {.addr = 0x08, .buf = &data, .flags = 0, .len = 1}; + struct dvb_frontend *fe; + fe = dev->dvb.frontend; + if (fe->ops.i2c_gate_ctrl) { + fe->ops.i2c_gate_ctrl(fe, 1); + i2c_transfer(&dev->i2c_adap, &msg, 1); + fe->ops.i2c_gate_ctrl(fe, 0); + } + } + } videobuf_dvb_unregister(&dev->dvb); return 0; }