X-Git-Url: http://ftp.safe.ca/?a=blobdiff_plain;f=drivers%2Fmedia%2Fvideo%2Fem28xx%2Fem28xx-cards.c;h=75b2af2bf4cf5896c2ca6db137228104c4fcde42;hb=60245e858ddb2255d458868be16ba814f6f8d446;hp=90389270389b2655ba22c9c974e577f33f627b03;hpb=600bd7f0edee0f9687c3c77e6fe63c74452acbfa;p=safe%2Fjmp%2Flinux-2.6

diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c
index 9038927..75b2af2 100644
--- a/drivers/media/video/em28xx/em28xx-cards.c
+++ b/drivers/media/video/em28xx/em28xx-cards.c
@@ -592,6 +592,7 @@ struct em28xx_board em28xx_boards[] = {
 		.mts_firmware   = 1,
 		.has_12mhz_i2s  = 1,
 		.has_dvb        = 1,
+		.ir_codes       = ir_codes_hauppauge_new,
 		.decoder        = EM28XX_TVP5150,
 		.input          = { {
 			.type     = EM28XX_VMUX_TELEVISION,
@@ -615,6 +616,7 @@ struct em28xx_board em28xx_boards[] = {
 		.mts_firmware   = 1,
 		.has_12mhz_i2s  = 1,
 		.has_dvb        = 1,
+		.ir_codes       = ir_codes_pinnacle_pctv_hd,
 		.decoder        = EM28XX_TVP5150,
 		.input          = { {
 			.type     = EM28XX_VMUX_TELEVISION,
@@ -638,6 +640,7 @@ struct em28xx_board em28xx_boards[] = {
 		.mts_firmware   = 1,
 		.has_12mhz_i2s  = 1,
 		.has_dvb        = 1,
+		.ir_codes       = ir_codes_ati_tv_wonder_hd_600,
 		.decoder        = EM28XX_TVP5150,
 		.input          = { {
 			.type     = EM28XX_VMUX_TELEVISION,
@@ -1087,6 +1090,21 @@ struct em28xx_board em28xx_boards[] = {
 			.amux     = EM28XX_AMUX_LINE_IN,
 		} },
 	},
+	[EM2874_BOARD_PINNACLE_PCTV_80E] = {
+		.name         = "Pinnacle PCTV HD Mini",
+		.vchannels    = 0,
+		.tuner_type   = TUNER_ABSENT,
+		.has_dvb        = 1,
+		.ir_codes       = ir_codes_pinnacle_pctv_hd,
+		.decoder      = EM28XX_NODECODER,
+#ifdef DJH_DEBUG
+		.input          = { {
+			.type     = EM28XX_VMUX_TELEVISION,
+			.vmux     = TVP5150_COMPOSITE0,
+			.amux     = EM28XX_AMUX_LINE_IN,
+		} },
+#endif
+	},
 };
 const unsigned int em28xx_bcount = ARRAY_SIZE(em28xx_boards);
 
@@ -1180,6 +1198,8 @@ struct usb_device_id em28xx_id_table [] = {
 			.driver_info = EM2882_BOARD_PINNACLE_HYBRID_PRO },
 	{ USB_DEVICE(0x2304, 0x0227),
 			.driver_info = EM2880_BOARD_PINNACLE_PCTV_HD_PRO },
+	{ USB_DEVICE(0x2304, 0x023f),
+			.driver_info = EM2874_BOARD_PINNACLE_PCTV_80E },
 	{ USB_DEVICE(0x0413, 0x6023),
 			.driver_info = EM2800_BOARD_LEADTEK_WINFAST_USBII },
 	{ USB_DEVICE(0x093b, 0xa005),
@@ -1255,6 +1275,17 @@ static struct em28xx_reg_seq em2882_terratec_hybrid_xs_digital[] = {
 	{  -1,			-1,	-1,		  -1},
 };
 
+/* Pinnacle PCTV HD Mini (80e) GPIOs
+   0-5: not used
+   6:   demod reset, active low
+   7:   LED on, active high */
+static struct em28xx_reg_seq em2874_pinnacle_80e_digital[] = {
+	{EM28XX_R06_I2C_CLK,    0x45,   0xff,		  10}, /*400 KHz*/
+	{EM2874_R80_GPIO,       0x80,   0xff,		  100},/*Demod reset*/
+	{EM2874_R80_GPIO,       0xc0,   0xff,		  10},
+	{  -1,			-1,	-1,		  -1},
+};
+
 /*
  * EEPROM hash table for devices with generic USB IDs
  */
@@ -1302,6 +1333,7 @@ static void em28xx_set_model(struct em28xx *dev)
 	dev->max_range_640_480 = em28xx_boards[dev->model].max_range_640_480;
 	dev->has_dvb = em28xx_boards[dev->model].has_dvb;
 	dev->has_snapshot_button = em28xx_boards[dev->model].has_snapshot_button;
+	dev->ir_codes = em28xx_boards[dev->model].ir_codes;
 	dev->valid = em28xx_boards[dev->model].valid;
 }
 
@@ -1312,11 +1344,13 @@ void em28xx_pre_card_setup(struct em28xx *dev)
 {
 	int rc;
 
-	rc = em28xx_read_reg(dev, EM2880_R04_GPO);
-	if (rc >= 0)
-		dev->reg_gpo = rc;
+	/* Set the default GPO/GPIO for legacy devices */
+	dev->reg_gpo_num = EM2880_R04_GPO;
+	dev->reg_gpio_num = EM28XX_R08_GPIO;
 
 	dev->wait_after_write = 5;
+
+	/* Based on the Chip ID, set the device configuration */
 	rc = em28xx_read_reg(dev, EM28XX_R0A_CHIPID);
 	if (rc > 0) {
 		dev->chip_id = rc;
@@ -1326,6 +1360,7 @@ void em28xx_pre_card_setup(struct em28xx *dev)
 			break;
 		case CHIP_ID_EM2874:
 			em28xx_info("chip ID is em2874\n");
+			dev->reg_gpio_num = EM2874_R80_GPIO;
 			dev->wait_after_write = 0;
 			break;
 		case CHIP_ID_EM2883:
@@ -1336,6 +1371,12 @@ void em28xx_pre_card_setup(struct em28xx *dev)
 			em28xx_info("em28xx chip ID = %d\n", rc);
 		}
 	}
+
+	/* Prepopulate cached GPO register content */
+	rc = em28xx_read_reg(dev, dev->reg_gpo_num);
+	if (rc >= 0)
+		dev->reg_gpo = rc;
+
 	em28xx_set_model(dev);
 
 	/* request some modules */
@@ -1509,6 +1550,13 @@ void em28xx_pre_card_setup(struct em28xx *dev)
 		/* enables audio for that device */
 		em28xx_write_regs_req(dev, 0x00, 0x08, "\xfd", 1);
 		break;
+
+	case EM2874_BOARD_PINNACLE_PCTV_80E:
+		/* Set 400 KHz clock */
+		em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x45", 1);
+
+		dev->digital_gpio = em2874_pinnacle_80e_digital;
+		break;
 	}
 
 	em28xx_gpio_set(dev, dev->tun_analog_gpio);
@@ -1800,4 +1848,6 @@ void em28xx_card_setup(struct em28xx *dev)
 #endif
 
 	em28xx_config_tuner(dev);
+
+	em28xx_ir_init(dev);
 }