X-Git-Url: http://ftp.safe.ca/?a=blobdiff_plain;f=drivers%2Fleds%2FKconfig;h=9b60b6b684d9cd7c5a62c843d827e6071491a51f;hb=8164491dd628ffcac5d61267f747997689ee256c;hp=9b79bcd9bf11d598544cabd97f985bd72261d2be;hpb=f3b6b6cd00d294d50e1c3eee85964c69d898de45;p=safe%2Fjmp%2Flinux-2.6 diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig index 9b79bcd..9b60b6b 100644 --- a/drivers/leds/Kconfig +++ b/drivers/leds/Kconfig @@ -1,6 +1,5 @@ menuconfig NEW_LEDS bool "LED Support" - depends on HAS_IOMEM help Say Y to enable Linux LED support. This allows control of supported LEDs from both userspace and optionally, by kernel events (triggers). @@ -18,12 +17,12 @@ config LEDS_CLASS comment "LED drivers" -config LEDS_CORGI - tristate "LED Support for the Sharp SL-C7x0 series" - depends on LEDS_CLASS && PXA_SHARP_C7xx +config LEDS_ATMEL_PWM + tristate "LED Support using Atmel PWM outputs" + depends on LEDS_CLASS && ATMEL_PWM help - This option enables support for the LEDs on Sharp Zaurus - SL-C7x0 series (C700, C750, C760, C860). + This option enables support for LEDs driven using outputs + of the dedicated PWM controller found on newer Atmel SOCs. config LEDS_LOCOMO tristate "LED Support for Locomo device" @@ -32,28 +31,12 @@ config LEDS_LOCOMO This option enables support for the LEDs on Sharp Locomo. Zaurus models SL-5500 and SL-5600. -config LEDS_SPITZ - tristate "LED Support for the Sharp SL-Cxx00 series" - depends on LEDS_CLASS && PXA_SHARP_Cxx00 +config LEDS_MIKROTIK_RB532 + tristate "LED Support for Mikrotik Routerboard 532" + depends on LEDS_CLASS && MIKROTIK_RB532 help - This option enables support for the LEDs on Sharp Zaurus - SL-Cxx00 series (C1000, C3000, C3100). - -config LEDS_IXP4XX - tristate "LED Support for GPIO connected LEDs on IXP4XX processors" - depends on LEDS_CLASS && ARCH_IXP4XX - help - This option enables support for the LEDs connected to GPIO - outputs of the Intel IXP4XX processors. To be useful the - particular board must have LEDs and they must be connected - to the GPIO lines. If unsure, say Y. - -config LEDS_TOSA - tristate "LED Support for the Sharp SL-6000 series" - depends on LEDS_CLASS && PXA_SHARPSL - help - This option enables support for the LEDs on Sharp Zaurus - SL-6000 series. + This option enables support for the so called "User LED" of + Mikrotik's Routerboard 532. config LEDS_S3C24XX tristate "LED Support for Samsung S3C24XX GPIO LEDs" @@ -75,15 +58,27 @@ config LEDS_NET48XX This option enables support for the Soekris net4801 and net4826 error LED. +config LEDS_FSG + tristate "LED Support for the Freecom FSG-3" + depends on LEDS_CLASS && MACH_FSG + help + This option enables support for the LEDs on the Freecom FSG-3. + config LEDS_WRAP tristate "LED Support for the WRAP series LEDs" depends on LEDS_CLASS && SCx200_GPIO help This option enables support for the PCEngines WRAP programmable LEDs. +config LEDS_ALIX2 + tristate "LED Support for ALIX.2 and ALIX.3 series" + depends on LEDS_CLASS && X86 && EXPERIMENTAL + help + This option enables support for the PCEngines ALIX.2 and ALIX.3 LEDs. + config LEDS_H1940 tristate "LED Support for iPAQ H1940 device" - depends LEDS_CLASS && ARCH_H1940 + depends on LEDS_CLASS && ARCH_H1940 help This option enables support for the LEDs on the h1940. @@ -93,13 +88,144 @@ config LEDS_COBALT_QUBE help This option enables support for the front LED on Cobalt Qube series +config LEDS_COBALT_RAQ + bool "LED Support for the Cobalt Raq series" + depends on LEDS_CLASS=y && MIPS_COBALT + select LEDS_TRIGGERS + help + This option enables support for the Cobalt Raq series LEDs. + +config LEDS_SUNFIRE + tristate "LED support for SunFire servers." + depends on LEDS_CLASS && SPARC64 + select LEDS_TRIGGERS + help + This option enables support for the Left, Middle, and Right + LEDs on the I/O and CPU boards of SunFire UltraSPARC servers. + +config LEDS_HP6XX + tristate "LED Support for the HP Jornada 6xx" + depends on LEDS_CLASS && SH_HP6XX + help + This option enables LED support for the handheld + HP Jornada 620/660/680/690. + +config LEDS_PCA9532 + tristate "LED driver for PCA9532 dimmer" + depends on LEDS_CLASS && I2C && INPUT && EXPERIMENTAL + help + This option enables support for NXP pca9532 + LED controller. It is generally only useful + as a platform driver + config LEDS_GPIO tristate "LED Support for GPIO connected LEDs" depends on LEDS_CLASS && GENERIC_GPIO help This option enables support for the LEDs connected to GPIO outputs. To be useful the particular board must have LEDs - and they must be connected to the GPIO lines. + and they must be connected to the GPIO lines. The LEDs must be + defined as platform devices and/or OpenFirmware platform devices. + The code to use these bindings can be selected below. + +config LEDS_GPIO_PLATFORM + bool "Platform device bindings for GPIO LEDs" + depends on LEDS_GPIO + default y + help + Let the leds-gpio driver drive LEDs which have been defined as + platform devices. If you don't know what this means, say yes. + +config LEDS_GPIO_OF + bool "OpenFirmware platform device bindings for GPIO LEDs" + depends on LEDS_GPIO && OF_DEVICE + default y + help + Let the leds-gpio driver drive LEDs which have been defined as + of_platform devices. For instance, LEDs which are listed in a "dts" + file. + +config LEDS_LP5521 + tristate "LED Support for the LP5521 LEDs" + depends on LEDS_CLASS && I2C + help + If you say 'Y' here you get support for the National Semiconductor + LP5521 LED driver used in n8x0 boards. + + This driver can be built as a module by choosing 'M'. The module + will be called leds-lp5521. + +config LEDS_CLEVO_MAIL + tristate "Mail LED on Clevo notebook" + depends on LEDS_CLASS && X86 && SERIO_I8042 && DMI + help + This driver makes the mail LED accessible from userspace + programs through the leds subsystem. This LED have three + known mode: off, blink at 0.5Hz and blink at 1Hz. + + The driver supports two kinds of interface: using ledtrig-timer + or through /sys/class/leds/clevo::mail/brightness. As this LED + cannot change it's brightness it blinks instead. The brightness + value 0 means off, 1..127 means blink at 0.5Hz and 128..255 means + blink at 1Hz. + + This module can drive the mail LED for the following notebooks: + + Clevo D400P + Clevo D410J + Clevo D410V + Clevo D400V/D470V (not tested, but might work) + Clevo M540N + Clevo M5x0N (not tested, but might work) + Positivo Mobile (Clevo M5x0V) + + If your model is not listed here you can try the "nodetect" + module parameter. + + To compile this driver as a module, choose M here: the + module will be called leds-clevo-mail. + +config LEDS_PCA955X + tristate "LED Support for PCA955x I2C chips" + depends on LEDS_CLASS && I2C + help + This option enables support for LEDs connected to PCA955x + LED driver chips accessed via the I2C bus. Supported + devices include PCA9550, PCA9551, PCA9552, and PCA9553. + +config LEDS_WM8350 + tristate "LED Support for WM8350 AudioPlus PMIC" + depends on LEDS_CLASS && MFD_WM8350 + help + This option enables support for LEDs driven by the Wolfson + Microelectronics WM8350 AudioPlus PMIC. + +config LEDS_DA903X + tristate "LED Support for DA9030/DA9034 PMIC" + depends on LEDS_CLASS && PMIC_DA903X + help + This option enables support for on-chip LED drivers found + on Dialog Semiconductor DA9030/DA9034 PMICs. + +config LEDS_DAC124S085 + tristate "LED Support for DAC124S085 SPI DAC" + depends on LEDS_CLASS && SPI + help + This option enables support for DAC124S085 SPI DAC from NatSemi, + which can be used to control up to four LEDs. + +config LEDS_PWM + tristate "PWM driven LED Support" + depends on LEDS_CLASS && HAVE_PWM + help + This option enables support for pwm driven LEDs + +config LEDS_BD2802 + tristate "LED driver for BD2802 RGB LED" + depends on LEDS_CLASS && I2C + help + This option enables support for BD2802GU RGB LED driver chips + accessed via the I2C bus. comment "LED Triggers" @@ -115,11 +241,15 @@ config LEDS_TRIGGER_TIMER depends on LEDS_TRIGGERS help This allows LEDs to be controlled by a programmable timer - via sysfs. If unsure, say Y. + via sysfs. Some LED hardware can be programmed to start + blinking the LED without any further software interaction. + For more details read Documentation/leds-class.txt. + + If unsure, say Y. config LEDS_TRIGGER_IDE_DISK bool "LED IDE Disk Trigger" - depends on LEDS_TRIGGERS && BLK_DEV_IDEDISK + depends on LEDS_TRIGGERS && IDE_GD_ATA help This allows LEDs to be controlled by IDE disk activity. If unsure, say Y. @@ -133,4 +263,36 @@ config LEDS_TRIGGER_HEARTBEAT load average. If unsure, say Y. +config LEDS_TRIGGER_BACKLIGHT + tristate "LED backlight Trigger" + depends on LEDS_TRIGGERS + help + This allows LEDs to be controlled as a backlight device: they + turn off and on when the display is blanked and unblanked. + + If unsure, say N. + +config LEDS_TRIGGER_GPIO + tristate "LED GPIO Trigger" + depends on LEDS_TRIGGERS + depends on GPIOLIB + help + This allows LEDs to be controlled by gpio events. It's good + when using gpios as switches and triggering the needed LEDs + from there. One use case is n810's keypad LEDs that could + be triggered by this trigger when user slides up to show + keypad. + + If unsure, say N. + +config LEDS_TRIGGER_DEFAULT_ON + tristate "LED Default ON Trigger" + depends on LEDS_TRIGGERS + help + This allows LEDs to be initialised in the ON state. + If unsure, say Y. + +comment "iptables trigger is under Netfilter config (LED target)" + depends on LEDS_TRIGGERS + endif # NEW_LEDS