X-Git-Url: http://ftp.safe.ca/?a=blobdiff_plain;f=drivers%2Fleds%2FKconfig;h=1c35dfaef721223505a5b5899647d4565f67e5ed;hb=e14fa82439d33cef67eaafc1a48960bbfa610c8e;hp=626506234b76ca62b29b34708e820f122470e2db;hpb=a8d2e7d95229db9999682113bfac40b49978f212;p=safe%2Fjmp%2Flinux-2.6 diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig index 6265062..1c35dfa 100644 --- a/drivers/leds/Kconfig +++ b/drivers/leds/Kconfig @@ -1,7 +1,4 @@ - -menu "LED devices" - -config NEW_LEDS +menuconfig NEW_LEDS bool "LED Support" help Say Y to enable Linux LED support. This allows control of supported @@ -10,52 +7,44 @@ config NEW_LEDS This is not related to standard keyboard LEDs which are controlled via the input system. +if NEW_LEDS + config LEDS_CLASS tristate "LED Class Support" - depends NEW_LEDS help This option enables the led sysfs class in /sys/class/leds. You'll need this to do anything useful with LEDs. If unsure, say N. comment "LED drivers" +config LEDS_ATMEL_PWM + tristate "LED Support using Atmel PWM outputs" + depends on LEDS_CLASS && ATMEL_PWM + help + This option enables support for LEDs driven using outputs + of the dedicated PWM controller found on newer Atmel SOCs. + config LEDS_CORGI tristate "LED Support for the Sharp SL-C7x0 series" - depends LEDS_CLASS && PXA_SHARP_C7xx + depends on LEDS_CLASS && PXA_SHARP_C7xx help This option enables support for the LEDs on Sharp Zaurus SL-C7x0 series (C700, C750, C760, C860). config LEDS_LOCOMO tristate "LED Support for Locomo device" - depends LEDS_CLASS && SHARP_LOCOMO + depends on LEDS_CLASS && SHARP_LOCOMO help This option enables support for the LEDs on Sharp Locomo. Zaurus models SL-5500 and SL-5600. config LEDS_SPITZ tristate "LED Support for the Sharp SL-Cxx00 series" - depends LEDS_CLASS && PXA_SHARP_Cxx00 + depends on LEDS_CLASS && PXA_SHARP_Cxx00 help This option enables support for the LEDs on Sharp Zaurus SL-Cxx00 series (C1000, C3000, C3100). -config LEDS_IXP4XX - tristate "LED Support for GPIO connected LEDs on IXP4XX processors" - depends LEDS_CLASS && ARCH_IXP4XX - help - This option enables support for the LEDs connected to GPIO - outputs of the Intel IXP4XX processors. To be useful the - particular board must have LEDs and they must be connected - to the GPIO lines. If unsure, say Y. - -config LEDS_TOSA - tristate "LED Support for the Sharp SL-6000 series" - depends LEDS_CLASS && PXA_SHARPSL - help - This option enables support for the LEDs on Sharp Zaurus - SL-6000 series. - config LEDS_S3C24XX tristate "LED Support for Samsung S3C24XX GPIO LEDs" depends on LEDS_CLASS && ARCH_S3C2410 @@ -63,11 +52,113 @@ config LEDS_S3C24XX This option enables support for LEDs connected to GPIO lines on Samsung S3C24XX series CPUs, such as the S3C2410 and S3C2440. +config LEDS_AMS_DELTA + tristate "LED Support for the Amstrad Delta (E3)" + depends on LEDS_CLASS && MACH_AMS_DELTA + help + This option enables support for the LEDs on Amstrad Delta (E3). + +config LEDS_NET48XX + tristate "LED Support for Soekris net48xx series Error LED" + depends on LEDS_CLASS && SCx200_GPIO + help + This option enables support for the Soekris net4801 and net4826 error + LED. + +config LEDS_FSG + tristate "LED Support for the Freecom FSG-3" + depends on LEDS_CLASS && MACH_FSG + help + This option enables support for the LEDs on the Freecom FSG-3. + +config LEDS_WRAP + tristate "LED Support for the WRAP series LEDs" + depends on LEDS_CLASS && SCx200_GPIO + help + This option enables support for the PCEngines WRAP programmable LEDs. + +config LEDS_H1940 + tristate "LED Support for iPAQ H1940 device" + depends on LEDS_CLASS && ARCH_H1940 + help + This option enables support for the LEDs on the h1940. + +config LEDS_COBALT_QUBE + tristate "LED Support for the Cobalt Qube series front LED" + depends on LEDS_CLASS && MIPS_COBALT + help + This option enables support for the front LED on Cobalt Qube series + +config LEDS_COBALT_RAQ + bool "LED Support for the Cobalt Raq series" + depends on LEDS_CLASS && MIPS_COBALT + select LEDS_TRIGGERS + help + This option enables support for the Cobalt Raq series LEDs. + +config LEDS_HP6XX + tristate "LED Support for the HP Jornada 6xx" + depends on LEDS_CLASS && SH_HP6XX + help + This option enables led support for the handheld + HP Jornada 620/660/680/690. + +config LEDS_PCA9532 + tristate "LED driver for PCA9532 dimmer" + depends on LEDS_CLASS && I2C && INPUT && EXPERIMENTAL + help + This option enables support for NXP pca9532 + led controller. It is generally only usefull + as a platform driver + +config LEDS_GPIO + tristate "LED Support for GPIO connected LEDs" + depends on LEDS_CLASS && GENERIC_GPIO + help + This option enables support for the LEDs connected to GPIO + outputs. To be useful the particular board must have LEDs + and they must be connected to the GPIO lines. + +config LEDS_CM_X270 + tristate "LED Support for the CM-X270 LEDs" + depends on LEDS_CLASS && MACH_ARMCORE + help + This option enables support for the CM-X270 LEDs. + +config LEDS_CLEVO_MAIL + tristate "Mail LED on Clevo notebook (EXPERIMENTAL)" + depends on LEDS_CLASS && X86 && SERIO_I8042 && DMI && EXPERIMENTAL + help + This driver makes the mail LED accessible from userspace + programs through the leds subsystem. This LED have three + known mode: off, blink at 0.5Hz and blink at 1Hz. + + The driver supports two kinds of interface: using ledtrig-timer + or through /sys/class/leds/clevo::mail/brightness. As this LED + cannot change it's brightness it blinks instead. The brightness + value 0 means off, 1..127 means blink at 0.5Hz and 128..255 means + blink at 1Hz. + + This module can drive the mail LED for the following notebooks: + + Clevo D400P + Clevo D410J + Clevo D410V + Clevo D400V/D470V (not tested, but might work) + Clevo M540N + Clevo M5x0N (not tested, but might work) + Positivo Mobile (Clevo M5x0V) + + If your model is not listed here you can try the "nodetect" + module paramter. + + To compile this driver as a module, choose M here: the + module will be called leds-clevo-mail. + comment "LED Triggers" config LEDS_TRIGGERS bool "LED Trigger support" - depends NEW_LEDS help This option enables trigger support for the leds class. These triggers allow kernel events to drive the LEDs and can @@ -75,17 +166,36 @@ config LEDS_TRIGGERS config LEDS_TRIGGER_TIMER tristate "LED Timer Trigger" - depends LEDS_TRIGGERS + depends on LEDS_TRIGGERS help This allows LEDs to be controlled by a programmable timer - via sysfs. If unsure, say Y. + via sysfs. Some LED hardware can be programmed to start + blinking the LED without any further software interaction. + For more details read Documentation/leds-class.txt. + + If unsure, say Y. config LEDS_TRIGGER_IDE_DISK bool "LED IDE Disk Trigger" - depends LEDS_TRIGGERS && BLK_DEV_IDEDISK + depends on LEDS_TRIGGERS && BLK_DEV_IDEDISK help This allows LEDs to be controlled by IDE disk activity. If unsure, say Y. -endmenu +config LEDS_TRIGGER_HEARTBEAT + tristate "LED Heartbeat Trigger" + depends on LEDS_TRIGGERS + help + This allows LEDs to be controlled by a CPU load average. + The flash frequency is a hyperbolic function of the 1-minute + load average. + If unsure, say Y. + +config LEDS_TRIGGER_DEFAULT_ON + tristate "LED Default ON Trigger" + depends on LEDS_TRIGGERS + help + This allows LEDs to be initialised in the ON state. + If unsure, say Y. +endif # NEW_LEDS