X-Git-Url: http://ftp.safe.ca/?a=blobdiff_plain;f=drivers%2Finput%2Ftouchscreen%2Fmainstone-wm97xx.c;h=b6b8b1c7eceaf99b6eec1d613f3511c4a4a65550;hb=ec2a7587e0a91d5c1afe23a0a73edfce06c5e4e0;hp=590a1379aa321b3b0c59d80504818e897314f7fb;hpb=6cab48602996cdbcb277375a8107d53e21e8c9b9;p=safe%2Fjmp%2Flinux-2.6 diff --git a/drivers/input/touchscreen/mainstone-wm97xx.c b/drivers/input/touchscreen/mainstone-wm97xx.c index 590a137..b6b8b1c 100644 --- a/drivers/input/touchscreen/mainstone-wm97xx.c +++ b/drivers/input/touchscreen/mainstone-wm97xx.c @@ -3,8 +3,7 @@ * Wolfson WM97xx AC97 Codecs. * * Copyright 2004, 2007 Wolfson Microelectronics PLC. - * Author: Liam Girdwood - * liam.girdwood@wolfsonmicro.com or linux@wolfsonmicro.com + * Author: Liam Girdwood * Parts Copyright : Ian Molton * Andrew Zabolotny * @@ -15,7 +14,7 @@ * * Notes: * This is a wm97xx extended touch driver to capture touch - * data in a continuous manner on the Intel XScale archictecture + * data in a continuous manner on the Intel XScale architecture * * Features: * - codecs supported:- WM9705, WM9712, WM9713 @@ -25,7 +24,6 @@ #include #include -#include #include #include #include @@ -33,9 +31,11 @@ #include #include #include -#include +#include -#define VERSION "0.13" +#include + +#include struct continuous { u16 id; /* codec id */ @@ -64,6 +64,7 @@ static const struct continuous cinfo[] = { /* continuous speed index */ static int sp_idx; static u16 last, tries; +static int irq; /* * Pen sampling frequency (Hz) in continuous mode. @@ -113,13 +114,12 @@ static void wm97xx_acc_pen_up(struct wm97xx *wm) #else static void wm97xx_acc_pen_up(struct wm97xx *wm) { - int count = 16; + unsigned int count; + schedule_timeout_uninterruptible(1); - while (count < 16) { + for (count = 0; count < 16; count++) MODR; - count--; - } } #endif @@ -131,7 +131,7 @@ static int wm97xx_acc_pen_down(struct wm97xx *wm) /* When the AC97 queue has been drained we need to allow time * to buffer up samples otherwise we end up spinning polling * for samples. The controller can't have a suitably low - * threashold set to use the notifications it gives. + * threshold set to use the notifications it gives. */ schedule_timeout_uninterruptible(1); @@ -153,6 +153,9 @@ static int wm97xx_acc_pen_down(struct wm97xx *wm) if (pressure) p = MODR; + dev_dbg(wm->dev, "Raw coordinates: x=%x, y=%x, p=%x\n", + x, y, p); + /* are samples valid */ if ((x & WM97XX_ADCSRC_MASK) != WM97XX_ADCSEL_X || (y & WM97XX_ADCSRC_MASK) != WM97XX_ADCSEL_Y || @@ -164,6 +167,7 @@ static int wm97xx_acc_pen_down(struct wm97xx *wm) input_report_abs(wm->input_dev, ABS_X, x & 0xfff); input_report_abs(wm->input_dev, ABS_Y, y & 0xfff); input_report_abs(wm->input_dev, ABS_PRESSURE, p & 0xfff); + input_report_key(wm->input_dev, BTN_TOUCH, (p != 0)); input_sync(wm->input_dev); reads++; } while (reads < cinfo[sp_idx].reads); @@ -173,7 +177,7 @@ up: static int wm97xx_acc_startup(struct wm97xx *wm) { - int idx = 0; + int idx = 0, ret = 0; /* check we have a codec */ if (wm->ac97 == NULL) @@ -193,18 +197,40 @@ static int wm97xx_acc_startup(struct wm97xx *wm) "mainstone accelerated touchscreen driver, %d samples/sec\n", cinfo[sp_idx].speed); + /* IRQ driven touchscreen is used on Palm hardware */ + if (machine_is_palmt5() || machine_is_palmtx() || machine_is_palmld()) { + pen_int = 1; + irq = 27; + /* There is some obscure mutant of WM9712 interbred with WM9713 + * used on Palm HW */ + wm->variant = WM97xx_WM1613; + } else if (machine_is_mainstone() && pen_int) + irq = 4; + + if (irq) { + ret = gpio_request(irq, "Touchscreen IRQ"); + if (ret) + goto out; + + ret = gpio_direction_input(irq); + if (ret) { + gpio_free(irq); + goto out; + } + + wm->pen_irq = gpio_to_irq(irq); + set_irq_type(wm->pen_irq, IRQ_TYPE_EDGE_BOTH); + } else /* pen irq not supported */ + pen_int = 0; + /* codec specific irq config */ if (pen_int) { switch (wm->id) { case WM9705_ID2: - wm->pen_irq = IRQ_GPIO(4); - set_irq_type(IRQ_GPIO(4), IRQ_TYPE_EDGE_BOTH); break; case WM9712_ID2: case WM9713_ID2: - /* enable pen down interrupt */ /* use PEN_DOWN GPIO 13 to assert IRQ on GPIO line 2 */ - wm->pen_irq = MAINSTONE_AC97_IRQ; wm97xx_config_gpio(wm, WM97XX_GPIO_13, WM97XX_GPIO_IN, WM97XX_GPIO_POL_HIGH, WM97XX_GPIO_STICKY, @@ -222,23 +248,17 @@ static int wm97xx_acc_startup(struct wm97xx *wm) } } - return 0; +out: + return ret; } static void wm97xx_acc_shutdown(struct wm97xx *wm) { /* codec specific deconfig */ if (pen_int) { - switch (wm->id & 0xffff) { - case WM9705_ID2: - wm->pen_irq = 0; - break; - case WM9712_ID2: - case WM9713_ID2: - /* disable interrupt */ - wm->pen_irq = 0; - break; - } + if (irq) + gpio_free(irq); + wm->pen_irq = 0; } } @@ -247,7 +267,7 @@ static void wm97xx_irq_enable(struct wm97xx *wm, int enable) if (enable) enable_irq(wm->pen_irq); else - disable_irq(wm->pen_irq); + disable_irq_nosync(wm->pen_irq); } static struct wm97xx_mach_ops mainstone_mach_ops = { @@ -297,6 +317,6 @@ module_init(mainstone_wm97xx_init); module_exit(mainstone_wm97xx_exit); /* Module information */ -MODULE_AUTHOR("Liam Girdwood "); +MODULE_AUTHOR("Liam Girdwood "); MODULE_DESCRIPTION("wm97xx continuous touch driver for mainstone"); MODULE_LICENSE("GPL");