X-Git-Url: http://ftp.safe.ca/?a=blobdiff_plain;f=drivers%2Fieee1394%2Fsbp2.h;h=64a3a66a8a396fdc45d0e09d4f663cacb528f714;hb=81fa08f25bd24fc51557a2d2364fa1ab5e7407b4;hp=dd80906e8a9256d4cb5b86859e76b190794f4aba;hpb=cc078189125db84a85a3bbb82df788b84fc68aa1;p=safe%2Fjmp%2Flinux-2.6 diff --git a/drivers/ieee1394/sbp2.h b/drivers/ieee1394/sbp2.h index dd80906..64a3a66 100644 --- a/drivers/ieee1394/sbp2.h +++ b/drivers/ieee1394/sbp2.h @@ -25,25 +25,31 @@ #define SBP2_DEVICE_NAME "sbp2" /* - * SBP2 specific structures and defines + * There is no transport protocol limit to the CDB length, but we implement + * a fixed length only. 16 bytes is enough for disks larger than 2 TB. */ +#define SBP2_MAX_CDB_SIZE 16 -#define ORB_DIRECTION_WRITE_TO_MEDIA 0x0 -#define ORB_DIRECTION_READ_FROM_MEDIA 0x1 -#define ORB_DIRECTION_NO_DATA_TRANSFER 0x2 - -#define ORB_SET_NULL_PTR(value) ((value & 0x1) << 31) -#define ORB_SET_NOTIFY(value) ((value & 0x1) << 31) -#define ORB_SET_RQ_FMT(value) ((value & 0x3) << 29) /* unused ? */ -#define ORB_SET_NODE_ID(value) ((value & 0xffff) << 16) -#define ORB_SET_STATUS_FIFO_HI(value, id) (value >> 32 | ORB_SET_NODE_ID(id)) -#define ORB_SET_STATUS_FIFO_LO(value) (value & 0xffffffff) -#define ORB_SET_DATA_SIZE(value) (value & 0xffff) -#define ORB_SET_PAGE_SIZE(value) ((value & 0x7) << 16) -#define ORB_SET_PAGE_TABLE_PRESENT(value) ((value & 0x1) << 19) -#define ORB_SET_MAX_PAYLOAD(value) ((value & 0xf) << 20) -#define ORB_SET_SPEED(value) ((value & 0x7) << 24) -#define ORB_SET_DIRECTION(value) ((value & 0x1) << 27) +/* + * SBP-2 specific definitions + */ + +#define ORB_DIRECTION_WRITE_TO_MEDIA 0x0 +#define ORB_DIRECTION_READ_FROM_MEDIA 0x1 +#define ORB_DIRECTION_NO_DATA_TRANSFER 0x2 + +#define ORB_SET_NULL_PTR(v) (((v) & 0x1) << 31) +#define ORB_SET_NOTIFY(v) (((v) & 0x1) << 31) +#define ORB_SET_RQ_FMT(v) (((v) & 0x3) << 29) +#define ORB_SET_NODE_ID(v) (((v) & 0xffff) << 16) +#define ORB_SET_STATUS_FIFO_HI(v, id) ((v) >> 32 | ORB_SET_NODE_ID(id)) +#define ORB_SET_STATUS_FIFO_LO(v) ((v) & 0xffffffff) +#define ORB_SET_DATA_SIZE(v) ((v) & 0xffff) +#define ORB_SET_PAGE_SIZE(v) (((v) & 0x7) << 16) +#define ORB_SET_PAGE_TABLE_PRESENT(v) (((v) & 0x1) << 19) +#define ORB_SET_MAX_PAYLOAD(v) (((v) & 0xf) << 20) +#define ORB_SET_SPEED(v) (((v) & 0x7) << 24) +#define ORB_SET_DIRECTION(v) (((v) & 0x1) << 27) struct sbp2_command_orb { u32 next_ORB_hi; @@ -51,7 +57,7 @@ struct sbp2_command_orb { u32 data_descriptor_hi; u32 data_descriptor_lo; u32 misc; - u8 cdb[12]; + u8 cdb[SBP2_MAX_CDB_SIZE]; } __attribute__((packed)); #define SBP2_LOGIN_REQUEST 0x0 @@ -64,12 +70,12 @@ struct sbp2_command_orb { #define SBP2_LOGICAL_UNIT_RESET 0xe #define SBP2_TARGET_RESET_REQUEST 0xf -#define ORB_SET_LUN(value) (value & 0xffff) -#define ORB_SET_FUNCTION(value) ((value & 0xf) << 16) -#define ORB_SET_RECONNECT(value) ((value & 0xf) << 20) -#define ORB_SET_EXCLUSIVE(value) ((value & 0x1) << 28) -#define ORB_SET_LOGIN_RESP_LENGTH(value) (value & 0xffff) -#define ORB_SET_PASSWD_LENGTH(value) ((value & 0xffff) << 16) +#define ORB_SET_LUN(v) ((v) & 0xffff) +#define ORB_SET_FUNCTION(v) (((v) & 0xf) << 16) +#define ORB_SET_RECONNECT(v) (((v) & 0xf) << 20) +#define ORB_SET_EXCLUSIVE(v) ((v) ? 1 << 28 : 0) +#define ORB_SET_LOGIN_RESP_LENGTH(v) ((v) & 0xffff) +#define ORB_SET_PASSWD_LENGTH(v) (((v) & 0xffff) << 16) struct sbp2_login_orb { u32 password_hi; @@ -82,9 +88,9 @@ struct sbp2_login_orb { u32 status_fifo_lo; } __attribute__((packed)); -#define RESPONSE_GET_LOGIN_ID(value) (value & 0xffff) -#define RESPONSE_GET_LENGTH(value) ((value >> 16) & 0xffff) -#define RESPONSE_GET_RECONNECT_HOLD(value) (value & 0xffff) +#define RESPONSE_GET_LOGIN_ID(v) ((v) & 0xffff) +#define RESPONSE_GET_LENGTH(v) (((v) >> 16) & 0xffff) +#define RESPONSE_GET_RECONNECT_HOLD(v) ((v) & 0xffff) struct sbp2_login_response { u32 length_login_ID; @@ -93,9 +99,8 @@ struct sbp2_login_response { u32 reconnect_hold; } __attribute__((packed)); -#define ORB_SET_LOGIN_ID(value) (value & 0xffff) - -#define ORB_SET_QUERY_LOGINS_RESP_LENGTH(value) (value & 0xffff) +#define ORB_SET_LOGIN_ID(v) ((v) & 0xffff) +#define ORB_SET_QUERY_LOGINS_RESP_LENGTH(v) ((v) & 0xffff) struct sbp2_query_logins_orb { u32 reserved1; @@ -108,8 +113,8 @@ struct sbp2_query_logins_orb { u32 status_fifo_lo; } __attribute__((packed)); -#define RESPONSE_GET_MAX_LOGINS(value) (value & 0xffff) -#define RESPONSE_GET_ACTIVE_LOGINS(value) ((RESPONSE_GET_LENGTH(value) - 4) / 12) +#define RESPONSE_GET_MAX_LOGINS(v) ((v) & 0xffff) +#define RESPONSE_GET_ACTIVE_LOGINS(v) ((RESPONSE_GET_LENGTH((v)) - 4) / 12) struct sbp2_query_logins_response { u32 length_max_logins; @@ -140,13 +145,10 @@ struct sbp2_logout_orb { u32 status_fifo_lo; } __attribute__((packed)); -#define PAGE_TABLE_SET_SEGMENT_BASE_HI(value) (value & 0xffff) -#define PAGE_TABLE_SET_SEGMENT_LENGTH(value) ((value & 0xffff) << 16) - struct sbp2_unrestricted_page_table { - u32 length_segment_base_hi; - u32 segment_base_lo; -} __attribute__((packed)); + __be32 high; + __be32 low; +}; #define RESP_STATUS_REQUEST_COMPLETE 0x0 #define RESP_STATUS_TRANSPORT_FAILURE 0x1 @@ -171,21 +173,14 @@ struct sbp2_unrestricted_page_table { #define SFMT_DEFERRED_ERROR 0x1 #define SFMT_VENDOR_DEPENDENT_STATUS 0x3 -#define SBP2_SCSI_STATUS_GOOD 0x0 -#define SBP2_SCSI_STATUS_CHECK_CONDITION 0x2 -#define SBP2_SCSI_STATUS_CONDITION_MET 0x4 -#define SBP2_SCSI_STATUS_BUSY 0x8 -#define SBP2_SCSI_STATUS_RESERVATION_CONFLICT 0x18 -#define SBP2_SCSI_STATUS_COMMAND_TERMINATED 0x22 - -#define SBP2_SCSI_STATUS_SELECTION_TIMEOUT 0xff - -#define STATUS_GET_ORB_OFFSET_HI(value) (value & 0xffff) -#define STATUS_GET_SBP_STATUS(value) ((value >> 16) & 0xff) -#define STATUS_GET_LENGTH(value) ((value >> 24) & 0x7) -#define STATUS_GET_DEAD_BIT(value) ((value >> 27) & 0x1) -#define STATUS_GET_RESP(value) ((value >> 28) & 0x3) -#define STATUS_GET_SRC(value) ((value >> 30) & 0x3) +#define STATUS_GET_SRC(v) (((v) >> 30) & 0x3) +#define STATUS_GET_RESP(v) (((v) >> 28) & 0x3) +#define STATUS_GET_LEN(v) (((v) >> 24) & 0x7) +#define STATUS_GET_SBP_STATUS(v) (((v) >> 16) & 0xff) +#define STATUS_GET_ORB_OFFSET_HI(v) ((v) & 0x0000ffff) +#define STATUS_TEST_DEAD(v) ((v) & 0x08000000) +/* test 'resp' | 'dead' | 'sbp2_status' */ +#define STATUS_TEST_RDS(v) ((v) & 0x38ff0000) struct sbp2_status_block { u32 ORB_offset_hi_misc; @@ -193,92 +188,87 @@ struct sbp2_status_block { u8 command_set_dependent[24]; } __attribute__((packed)); + /* - * Miscellaneous SBP2 related config rom defines + * SBP2 related configuration ROM definitions */ -#define SBP2_UNIT_DIRECTORY_OFFSET_KEY 0xd1 -#define SBP2_CSR_OFFSET_KEY 0x54 -#define SBP2_UNIT_SPEC_ID_KEY 0x12 -#define SBP2_UNIT_SW_VERSION_KEY 0x13 -#define SBP2_COMMAND_SET_SPEC_ID_KEY 0x38 -#define SBP2_COMMAND_SET_KEY 0x39 -#define SBP2_UNIT_CHARACTERISTICS_KEY 0x3a -#define SBP2_DEVICE_TYPE_AND_LUN_KEY 0x14 -#define SBP2_FIRMWARE_REVISION_KEY 0x3c +#define SBP2_UNIT_DIRECTORY_OFFSET_KEY 0xd1 +#define SBP2_CSR_OFFSET_KEY 0x54 +#define SBP2_UNIT_SPEC_ID_KEY 0x12 +#define SBP2_UNIT_SW_VERSION_KEY 0x13 +#define SBP2_COMMAND_SET_SPEC_ID_KEY 0x38 +#define SBP2_COMMAND_SET_KEY 0x39 +#define SBP2_UNIT_CHARACTERISTICS_KEY 0x3a +#define SBP2_DEVICE_TYPE_AND_LUN_KEY 0x14 +#define SBP2_FIRMWARE_REVISION_KEY 0x3c + +#define SBP2_AGENT_STATE_OFFSET 0x00ULL +#define SBP2_AGENT_RESET_OFFSET 0x04ULL +#define SBP2_ORB_POINTER_OFFSET 0x08ULL +#define SBP2_DOORBELL_OFFSET 0x10ULL +#define SBP2_UNSOLICITED_STATUS_ENABLE_OFFSET 0x14ULL +#define SBP2_UNSOLICITED_STATUS_VALUE 0xf -#define SBP2_AGENT_STATE_OFFSET 0x00ULL -#define SBP2_AGENT_RESET_OFFSET 0x04ULL -#define SBP2_ORB_POINTER_OFFSET 0x08ULL -#define SBP2_DOORBELL_OFFSET 0x10ULL -#define SBP2_UNSOLICITED_STATUS_ENABLE_OFFSET 0x14ULL -#define SBP2_UNSOLICITED_STATUS_VALUE 0xf +#define SBP2_BUSY_TIMEOUT_ADDRESS 0xfffff0000210ULL +/* biggest possible value for Single Phase Retry count is 0xf */ +#define SBP2_BUSY_TIMEOUT_VALUE 0xf -#define SBP2_BUSY_TIMEOUT_ADDRESS 0xfffff0000210ULL -#define SBP2_BUSY_TIMEOUT_VALUE 0xf +#define SBP2_AGENT_RESET_DATA 0xf -#define SBP2_AGENT_RESET_DATA 0xf +#define SBP2_UNIT_SPEC_ID_ENTRY 0x0000609e +#define SBP2_SW_VERSION_ENTRY 0x00010483 /* - * Unit spec id and sw version entry for SBP-2 devices + * The default maximum s/g segment size of a FireWire controller is + * usually 0x10000, but SBP-2 only allows 0xffff. Since buffers have to + * be quadlet-aligned, we set the length limit to 0xffff & ~3. */ - -#define SBP2_UNIT_SPEC_ID_ENTRY 0x0000609e -#define SBP2_SW_VERSION_ENTRY 0x00010483 +#define SBP2_MAX_SEG_SIZE 0xfffc /* - * SCSI specific stuff + * There is no real limitation of the queue depth (i.e. length of the linked + * list of command ORBs) at the target. The chosen depth is merely an + * implementation detail of the sbp2 driver. */ +#define SBP2_MAX_CMDS 8 -#define SBP2_MAX_SG_ELEMENT_LENGTH 0xf000 -#define SBP2_MAX_SECTORS 255 /* Max sectors supported */ -#define SBP2_MAX_CMDS 8 /* This should be safe */ - -/* Flags for detected oddities and brokeness */ -#define SBP2_WORKAROUND_128K_MAX_TRANS 0x1 -#define SBP2_WORKAROUND_INQUIRY_36 0x2 -#define SBP2_WORKAROUND_MODE_SENSE_8 0x4 -#define SBP2_WORKAROUND_FIX_CAPACITY 0x8 -#define SBP2_WORKAROUND_OVERRIDE 0x100 +#define SBP2_SCSI_STATUS_GOOD 0x0 +#define SBP2_SCSI_STATUS_CHECK_CONDITION 0x2 +#define SBP2_SCSI_STATUS_CONDITION_MET 0x4 +#define SBP2_SCSI_STATUS_BUSY 0x8 +#define SBP2_SCSI_STATUS_RESERVATION_CONFLICT 0x18 +#define SBP2_SCSI_STATUS_COMMAND_TERMINATED 0x22 +#define SBP2_SCSI_STATUS_SELECTION_TIMEOUT 0xff -/* This is the two dma types we use for cmd_dma below */ -enum cmd_dma_types { - CMD_DMA_NONE, - CMD_DMA_PAGE, - CMD_DMA_SINGLE -}; /* - * Encapsulates all the info necessary for an outstanding command. + * Representations of commands and devices */ -struct sbp2_command_info { +/* Per SCSI command */ +struct sbp2_command_info { struct list_head list; - struct sbp2_command_orb command_orb ____cacheline_aligned; - dma_addr_t command_orb_dma ____cacheline_aligned; + struct sbp2_command_orb command_orb; + dma_addr_t command_orb_dma; struct scsi_cmnd *Current_SCpnt; void (*Current_done)(struct scsi_cmnd *); /* Also need s/g structure for each sbp2 command */ - struct sbp2_unrestricted_page_table scatter_gather_element[SG_ALL] ____cacheline_aligned; - dma_addr_t sge_dma ____cacheline_aligned; - void *sge_buffer; - dma_addr_t cmd_dma; - enum cmd_dma_types dma_type; - unsigned long dma_size; - int dma_dir; - + struct sbp2_unrestricted_page_table + scatter_gather_element[SG_ALL] __attribute__((aligned(8))); + dma_addr_t sge_dma; }; -struct sbp2scsi_host_info; +/* Per FireWire host */ +struct sbp2_fwhost_info { + struct hpsb_host *host; + struct list_head logical_units; +}; -/* - * Information needed on a per scsi id basis (one for each sbp2 device) - */ -struct scsi_id_instance_data { - /* - * Various sbp2 specific structures - */ +/* Per logical unit */ +struct sbp2_lu { + /* Operation request blocks */ struct sbp2_command_orb *last_orb; dma_addr_t last_orb_dma; struct sbp2_login_orb *login_orb; @@ -295,111 +285,62 @@ struct scsi_id_instance_data { dma_addr_t logout_orb_dma; struct sbp2_status_block status_block; - /* - * Stuff we need to know about the sbp2 device itself - */ - u64 sbp2_management_agent_addr; - u64 sbp2_command_block_agent_addr; + /* How to talk to the unit */ + u64 management_agent_addr; + u64 command_block_agent_addr; u32 speed_code; u32 max_payload_size; + u16 lun; - /* - * Values pulled from the device's unit directory - */ - u32 sbp2_command_set_spec_id; - u32 sbp2_command_set; - u32 sbp2_unit_characteristics; - u32 sbp2_lun; - u32 sbp2_firmware_revision; - - /* - * Address for the device to write status blocks to - */ + /* Address for the unit to write status blocks to */ u64 status_fifo_addr; - /* - * Variable used for logins, reconnects, logouts, query logins - */ - atomic_t sbp2_login_complete; + /* Waitqueue flag for logins, reconnects, logouts, query logins */ + unsigned int access_complete:1; - /* - * Pool of command orbs, so we can have more than overlapped command per id - */ - spinlock_t sbp2_command_orb_lock; - struct list_head sbp2_command_orb_inuse; - struct list_head sbp2_command_orb_completed; + /* Pool of command ORBs for this logical unit */ + spinlock_t cmd_orb_lock; + struct list_head cmd_orb_inuse; + struct list_head cmd_orb_completed; - struct list_head scsi_list; + /* Backlink to FireWire host; list of units attached to the host */ + struct sbp2_fwhost_info *hi; + struct list_head lu_list; - /* Node entry, as retrieved from NodeMgr entries */ + /* IEEE 1394 core's device representations */ struct node_entry *ne; struct unit_directory *ud; - /* A backlink to our host_info */ - struct sbp2scsi_host_info *hi; - - /* SCSI related pointers */ + /* SCSI core's device representations */ struct scsi_device *sdev; - struct Scsi_Host *scsi_host; + struct Scsi_Host *shost; /* Device specific workarounds/brokeness */ unsigned workarounds; -}; -/* Sbp2 host data structure (one per IEEE1394 host) */ -struct sbp2scsi_host_info { - struct hpsb_host *host; /* IEEE1394 host */ - struct list_head scsi_ids; /* List of scsi ids on this host */ -}; + /* Connection state */ + atomic_t state; -/* - * Function prototypes - */ + /* For deferred requests to the fetch agent */ + struct work_struct protocol_work; +}; -/* - * Various utility prototypes - */ -static int sbp2util_create_command_orb_pool(struct scsi_id_instance_data *scsi_id); -static void sbp2util_remove_command_orb_pool(struct scsi_id_instance_data *scsi_id); -static struct sbp2_command_info *sbp2util_find_command_for_orb(struct scsi_id_instance_data *scsi_id, dma_addr_t orb); -static struct sbp2_command_info *sbp2util_find_command_for_SCpnt(struct scsi_id_instance_data *scsi_id, void *SCpnt); -static struct sbp2_command_info *sbp2util_allocate_command_orb(struct scsi_id_instance_data *scsi_id, - struct scsi_cmnd *Current_SCpnt, - void (*Current_done)(struct scsi_cmnd *)); -static void sbp2util_mark_command_completed(struct scsi_id_instance_data *scsi_id, - struct sbp2_command_info *command); - - -static int sbp2_start_device(struct scsi_id_instance_data *scsi_id); -static void sbp2_remove_device(struct scsi_id_instance_data *scsi_id); - -#ifdef CONFIG_IEEE1394_SBP2_PHYS_DMA -static int sbp2_handle_physdma_write(struct hpsb_host *host, int nodeid, int destid, quadlet_t *data, - u64 addr, size_t length, u16 flags); -static int sbp2_handle_physdma_read(struct hpsb_host *host, int nodeid, quadlet_t *data, - u64 addr, size_t length, u16 flags); -#endif +/* For use in sbp2_lu.state */ +enum sbp2lu_state_types { + SBP2LU_STATE_RUNNING, /* all normal */ + SBP2LU_STATE_IN_RESET, /* between bus reset and reconnect */ + SBP2LU_STATE_IN_SHUTDOWN /* when sbp2_remove was called */ +}; -/* - * SBP-2 protocol related prototypes - */ -static int sbp2_query_logins(struct scsi_id_instance_data *scsi_id); -static int sbp2_login_device(struct scsi_id_instance_data *scsi_id); -static int sbp2_reconnect_device(struct scsi_id_instance_data *scsi_id); -static int sbp2_logout_device(struct scsi_id_instance_data *scsi_id); -static int sbp2_handle_status_write(struct hpsb_host *host, int nodeid, int destid, - quadlet_t *data, u64 addr, size_t length, u16 flags); -static int sbp2_agent_reset(struct scsi_id_instance_data *scsi_id, int wait); -static int sbp2_link_orb_command(struct scsi_id_instance_data *scsi_id, - struct sbp2_command_info *command); -static int sbp2_send_command(struct scsi_id_instance_data *scsi_id, - struct scsi_cmnd *SCpnt, - void (*done)(struct scsi_cmnd *)); -static unsigned int sbp2_status_to_sense_data(unchar *sbp2_status, - unchar *sense_data); -static void sbp2_parse_unit_directory(struct scsi_id_instance_data *scsi_id, - struct unit_directory *ud); -static int sbp2_set_busy_timeout(struct scsi_id_instance_data *scsi_id); -static int sbp2_max_speed_and_size(struct scsi_id_instance_data *scsi_id); +/* For use in sbp2_lu.workarounds and in the corresponding + * module load parameter */ +#define SBP2_WORKAROUND_128K_MAX_TRANS 0x1 +#define SBP2_WORKAROUND_INQUIRY_36 0x2 +#define SBP2_WORKAROUND_MODE_SENSE_8 0x4 +#define SBP2_WORKAROUND_FIX_CAPACITY 0x8 +#define SBP2_WORKAROUND_DELAY_INQUIRY 0x10 +#define SBP2_INQUIRY_DELAY 12 +#define SBP2_WORKAROUND_POWER_CONDITION 0x20 +#define SBP2_WORKAROUND_OVERRIDE 0x100 #endif /* SBP2_H */