X-Git-Url: http://ftp.safe.ca/?a=blobdiff_plain;f=drivers%2Fide%2Fpci%2Ftriflex.c;h=60dcb645d1b091edad266247d248066c5081f300;hb=4c674235d667d7ddc6b0c95a228a507eb94da2d6;hp=68e1e9adf84dbb9595cc5845a51daefbdc2a4873;hpb=33c1002ed912ac9dacedd5d5b166da3b72d18460;p=safe%2Fjmp%2Flinux-2.6

diff --git a/drivers/ide/pci/triflex.c b/drivers/ide/pci/triflex.c
index 68e1e9a..60dcb64 100644
--- a/drivers/ide/pci/triflex.c
+++ b/drivers/ide/pci/triflex.c
@@ -1,6 +1,4 @@
 /*
- * triflex.c
- * 
  * IDE Chipset driver for the Compaq TriFlex IDE controller.
  * 
  * Known to work with the Compaq Workstation 5x00 series.
@@ -30,11 +28,6 @@
 #include <linux/types.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/timer.h>
-#include <linux/mm.h>
-#include <linux/ioport.h>
-#include <linux/blkdev.h>
 #include <linux/hdreg.h>
 #include <linux/pci.h>
 #include <linux/ide.h>
@@ -43,7 +36,7 @@
 static void triflex_set_mode(ide_drive_t *drive, const u8 speed)
 {
 	ide_hwif_t *hwif = HWIF(drive);
-	struct pci_dev *dev = hwif->pci_dev;
+	struct pci_dev *dev = to_pci_dev(hwif->dev);
 	u8 channel_offset = hwif->channel ? 0x74 : 0x70;
 	u16 timing = 0;
 	u32 triflex_timings = 0;
@@ -81,8 +74,6 @@ static void triflex_set_mode(ide_drive_t *drive, const u8 speed)
 		case XFER_PIO_0:
 			timing = 0x0808;
 			break;
-		default:
-			return;
 	}
 
 	triflex_timings &= ~(0xFFFF << (16 * unit));
@@ -96,31 +87,24 @@ static void triflex_set_pio_mode(ide_drive_t *drive, const u8 pio)
 	triflex_set_mode(drive, XFER_PIO_0 + pio);
 }
 
-static void __devinit init_hwif_triflex(ide_hwif_t *hwif)
-{
-	hwif->set_pio_mode = &triflex_set_pio_mode;
-	hwif->set_dma_mode = &triflex_set_mode;
-
-	if (hwif->dma_base == 0)
-		return;
-
-	hwif->mwdma_mask = 0x07;
-	hwif->swdma_mask = 0x07;
-}
+static const struct ide_port_ops triflex_port_ops = {
+	.set_pio_mode		= triflex_set_pio_mode,
+	.set_dma_mode		= triflex_set_mode,
+};
 
-static ide_pci_device_t triflex_device __devinitdata = {
+static const struct ide_port_info triflex_device __devinitdata = {
 	.name		= "TRIFLEX",
-	.init_hwif	= init_hwif_triflex,
-	.autodma	= AUTODMA,
 	.enablebits	= {{0x80, 0x01, 0x01}, {0x80, 0x02, 0x02}},
-	.bootable	= ON_BOARD,
+	.port_ops	= &triflex_port_ops,
 	.pio_mask	= ATA_PIO4,
+	.swdma_mask	= ATA_SWDMA2,
+	.mwdma_mask	= ATA_MWDMA2,
 };
 
 static int __devinit triflex_init_one(struct pci_dev *dev, 
 		const struct pci_device_id *id)
 {
-	return ide_setup_pci_device(dev, &triflex_device);
+	return ide_pci_init_one(dev, &triflex_device, NULL);
 }
 
 static const struct pci_device_id triflex_pci_tbl[] = {